From: Takashi Iwai Subject: Re: [PATCH] ALSA: hda/conexant - Add quirks for lenovo notebooks Date: Tue, 18 Oct 2011 14:46:25 +0200 Message-ID: References: <4E9D52EC.5030606@secunet.com> <4E9D6BA1.6050506@secunet.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id EAACC2454C for ; Tue, 18 Oct 2011 14:46:25 +0200 (CEST) In-Reply-To: <4E9D6BA1.6050506@secunet.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Torsten Hilbrich Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 18 Oct 2011 14:05:53 +0200, Torsten Hilbrich wrote: > > Am 18.10.2011 12:57, schrieb Takashi Iwai: > > At Tue, 18 Oct 2011 12:20:28 +0200, > > Torsten Hilbrich wrote: > >> > >> The lenovo sandy bridge notebooks (T420, T520, L520) didn't work with > >> the external sound input and output connectors on the dockig unit > >> (tested with P/N 45N5887). > >> > >> Loading snd-hda-intel with model=thinkpad solved the problem so I > >> added the accordings quirks to perform that decision automatically > >> for these specific models. > >> > >> Signed-off-by: Torsten Hilbrich > > > > Could you check whether model=auto with the latest kernel work? > > Basically I won't take any more the model-specific quirk but > > move all to the auto-parser as much as possible. > > I just checked with upstream v3.1-rc10, model=auto didn't solve the > problem on the Lenovo T520. OK, so it's a bug of BIOS. BIOS doesn't provide the pin for docking-station. The right fix in this case is to provide the pin config table. In sound git tree, there is a fix for Lenovo X200. A similar entry would work for you. git://github.com/tiwai/sound.git Check either topic/hda, for-next or master branch. > Here are some dmesg output with model=auto: > > snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X > snd_hda_intel 0000:00:1b.0: setting latency timer to 64 > hda-intel: chipset global capabilities = 0x4401 > hda-intel: Clearing TCSEL > hda-intel: HDA snoop disabled, enabling ... OK > hda-intel: codec_mask = 0xb > hda-intel: codec #0 probed OK > hda-intel: codec #1 probed OK > hda-intel: codec #3 probed OK > IBM TrackPoint firmware: 0x0e, buttons: 3/3 > hda_codec: model 'auto' is selected > hda_codec: CX20590: BIOS auto-probing. > autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker > speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > hp_outs=1 (0x19/0x0/0x0/0x0/0x0) > mono: mono_out=0x0 > inputs: Mic=0x1b Internal Mic=0x23 > > when playing some audio: > > hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 > hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x31 > hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x31 > hda_codec_cleanup_stream: NID=0x10 > hda_codec_cleanup_stream: NID=0x11 > > I will attach the codec#x files from /proc/asound/PCH if you need this > information. At best, please give alsa-info.sh output (run with --no-upload option). thanks, Takashi