From: Takashi Iwai Subject: Re: model needed for Clevo P150HM (Realtek ALC892) Date: Mon, 18 Jul 2011 13:19:42 +0200 Message-ID: References: <4E047441.4010003@gmail.com> <4E05C1B1.50302@gmail.com> <4E05C704.4080806@gmail.com> <4E05CE02.1070801@gmail.com> <4E082166.5060902@gmail.com> <4E08E33D.3060608@gmail.com> <4E0B62B6.6000007@gmail.com> <4E0B6BE0.1010003@gmail.com> <4E0B7D22.3040009@gmail.com> <4E0C17F2.5070704@gmail.com> <4E0CABBC.3070801@gmail.com> <4E0CBBED.9050501@gmail.com> <4E0CD984.9050408@gmail.com> <4E1243C3.5040302@gmail.com> <4E22CDC0.6090007@gmail.com> <4E22D2D2.4040208@gmail.com> <4E2415C2.8020600@gmail.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 2A28924480 for ; Mon, 18 Jul 2011 13:19:43 +0200 (CEST) In-Reply-To: <4E2415C2.8020600@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Julian Sikorski Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Mon, 18 Jul 2011 13:15:14 +0200, Julian Sikorski wrote: > > W dniu 18.07.2011 10:52, Takashi Iwai pisze: > > And I can't reproduce your problem with the alsa-info.sh output above. > > Give more exact information what you did and what is the problem. > > > > > > thanks, > > > > Takashi > I'm sorry for the confusion - let me sum up the current situation. With > the fixes you pushed to sound-2.6/master I was able to get 5.1 sound out > of my laptop. The only missing bit was the 7.1 sound. And the last > channel goes via a jack/optical spdif hybrid. The problem is that the > BIOS does not announce that and as such alsa is unaware of the side > surround channel. > Using Raymond's advice, I was able to make the sound come out of the > last jack, by changing some values for pin 0x17 (described as sidesurr > in the datasheet), diff is attached. I basically checked what was the > difference in alsa-info.sh output when I was changing number of channels > with alsamixer, and then did the same for pin 0x17. > Since, from what I understood, you wanted me to figure out which pin is > connected to the last jack [1], I thought this information would be > useful to fix BIOS shortcomings. Yes, and note that you can set up the initial pin configurations dynamically via sysfs, too. > Other problem is that the volume on that jack is controlled by center > and lfe sliders (in alsamixer), which is probably caused by the fact > that alsa is unaware of the 7.1 sound. And this is not what I can't reproduce. > If more information is needed, please let me know what do you need in > addition to alsa-info.sh output. First off, double-check whether the CLFE mixer really changes the pin amp. At best, take alsa-info.sh output snapshot before and after changing the mixer state, and compare the files (better give both files in the mail). Takashi