From: Takashi Iwai Subject: Re: additional problem Date: Tue, 12 Jul 2011 15:13:27 +0200 Message-ID: References: <4E0B2F67.3070304@digital-pipe.com> <4E0C68ED.1070506@digital-pipe.com> <4E1B07FD.9030702@digital-pipe.com> <4E1B1127.4080800@digital-pipe.com> <4E1B12FF.4080307@digital-pipe.com> <4E1B15EE.8080304@digital-pipe.com> <4E1C469B.4050400@digital-pipe.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id BC097246EE for ; Tue, 12 Jul 2011 15:13:30 +0200 (CEST) In-Reply-To: <4E1C469B.4050400@digital-pipe.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: David Henderson Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 12 Jul 2011 09:05:31 -0400, David Henderson wrote: > > On 07/11/2011 11:52 AM, Takashi Iwai wrote: > > At Mon, 11 Jul 2011 11:25:34 -0400, > > David Henderson wrote: > >> On 07/11/2011 11:17 AM, Takashi Iwai wrote: > >>> At Mon, 11 Jul 2011 11:13:03 -0400, > >>> David Henderson wrote: > >>>> On 07/11/2011 11:12 AM, Takashi Iwai wrote: > >>>>> At Mon, 11 Jul 2011 11:05:11 -0400, > >>>>> David Henderson wrote: > >>>>>> On 07/11/2011 10:43 AM, Takashi Iwai wrote: > >>>>>>> At Mon, 11 Jul 2011 10:26:05 -0400, > >>>>>>> David Henderson wrote: > >>>>>>>> On 07/01/2011 02:41 AM, Takashi Iwai wrote: > >>>>>>>>> At Thu, 30 Jun 2011 08:15:41 -0400, > >>>>>>>>> David Henderson wrote: > >>>>>>>>>> On 06/29/2011 09:57 AM, David Henderson wrote: > >>>>>>>>>>> Hi gang! I've successfully been able to compile the alsa-utils > >>>>>>>>>>> package with the > >>>>>>>>>>> "--with-alsa-inc-prefix=/opt/staging/alsa/var/share/include > >>>>>>>>>>> --with-alsa-prefix=/opt/staging/alsa/lib", but the problem I'm having > >>>>>>>>>>> now is that the compiled binaries are looking for those directories > >>>>>>>>>>> during run-time and not just compile-time. Does anyone have any > >>>>>>>>>>> thoughts on using those directories for package creation, but that the > >>>>>>>>>>> software doesn't use the '/opt/staging/alsa' prefix during run-time? > >>>>>>>>>>> > >>>>>>>>>>> Thanks, > >>>>>>>>>>> Dave > >>>>>>>>>> bump for help > >>>>>>>>> It works usually as is. Check once via ldd whether the binary is > >>>>>>>>> really linked with that fixed path. You may hit a problem when using > >>>>>>>>> libtool with *.la files, for example. > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Takashi > >>>>>>>> Thanks for the continued help Takashi. I've performed the requested > >>>>>>>> steps, but all referenced libs are correct (e.g. /lib/... and not > >>>>>>>> /opt/staging/alsa/lib/...). Any other thoughts? > >>>>>>> Check ldd output of the binary. If it contains the /opt/ path, it > >>>>>>> means that the path is set statically into the binary. The old > >>>>>>> libtool had a related problem, IIRC. > >>>>>>> > >>>>>>> Other than that, rather ask your distro. It's really distro-specific. > >>>>>>> > >>>>>>> > >>>>>>> Takashi > >>>>>> Hey Takashi, I performed the requested steps, but the output is still > >>>>>> correct (e.g. /lib/... and not /opt/staging/alsa/lib/...). > >>>>> So, what shows ldd at all? Too little information. > >>>>> > >>>>> > >>>>> Takashi > >>>> # ldd /bin/amixer > >>>> linux-gate.so.1 => (0xb7768000) > >>>> libm.so.6 => /lib/libm.so.6 (0xb7741000) > >>>> libasound.so.2 => /lib/libasound.so.2 (0xb7667000) > >>>> libdl.so.2 => /lib/libdl.so.2 (0xb7663000) > >>>> libpthread.so.0 => /lib/libpthread.so.0 (0xb764b000) > >>>> libc.so.6 => /lib/libc.so.6 (0xb7507000) > >>>> /lib/ld-linux.so.2 (0xb7769000) > >>>> librt.so.1 => /lib/librt.so.1 (0xb74fe000) > >>> Then what happens if you run /bin/amixer ? > >>> > >>> > >>> Takashi > >> # /bin/amixer > >> ALSA lib conf.c:3601:(snd_config_update_r) Cannot access file > >> /opt/staging/package/var/share/alsa/alsa.conf > >> ALSA lib control.c:902:(snd_ctl_open_noupdate) Invalid CTL default > >> amixer: Mixer attach default error: No such file or directory > > It's a problem of alsa-lib build, not alsa-utils. > > Maybe you changed --prefix wrongly at alsa-lib build time? > > > > > > Takashi > > That solved the problem! Thanks Takashi! Now that I've gotten the > software to compile correctly and I'm able to interact with the audio > hardware using alsamixer, I tried to run the speaker-test and now I'm > getting the error "ALSA lib > pcm_direct.c:1616:(snd1_pcm_direct_parse_open_conf) The field ipc_gid > must be a valid group (create group audio)" which I can see is a problem > with the absence of the 'audio' group on the distro. Is there a way I > can configure alsa to use a different group other than 'audio'? You can set defaults.pcm.ipc_gid in ~/.asoundrc or /etc/asound.conf. Put a line like defaults.pcm.ipc_gid "user" then the group "user" will be used for dmix/dsnoop. Takashi