From: Takashi Iwai Subject: Re: hda intel - power save - need more help Date: Mon, 02 Jun 2008 12:19:43 +0200 Message-ID: References: <827ad74d0806012345w181a69c0n7cff807d7f763577@mail.gmail.com> <827ad74d0806020237k49c67e1eq1ccc0cee70338450@mail.gmail.com> <827ad74d0806020314h46cf4661jddde377da3c0a66f@mail.gmail.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (ns2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 1E2ED103874 for ; Mon, 2 Jun 2008 12:19:48 +0200 (CEST) In-Reply-To: <827ad74d0806020314h46cf4661jddde377da3c0a66f@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Harsha priya gupta Cc: Alsa-devel List-Id: alsa-devel@alsa-project.org At Mon, 2 Jun 2008 15:44:08 +0530, Harsha priya gupta wrote: > > using the hildon desktop, there is just one control exposed of volume/mute. i > muted that and still no luck. Any other idea that that i can try? Try standard programs in alsa-utils instead. Takashi > > On Mon, Jun 2, 2008 at 3:11 PM, Takashi Iwai wrote: > > At Mon, 2 Jun 2008 15:07:49 +0530, > Harsha priya gupta wrote: > > > > I verified the value of /sys/modules/snd_hda_intel/parameters/power_save > to be > > 10. > > > > How can i ensure that the analog switches are off? Through Kmix? > > Any sane mixer apps you like. But note that some mixer apps are buggy > and don't show all mixer components. > > Takashi > > > > > On Mon, Jun 2, 2008 at 1:01 PM, Takashi Iwai wrote: > > > > At Mon, 2 Jun 2008 12:15:06 +0530, > > Harsha priya gupta wrote: > > > > > > I checked on these articles on powertop...i manually set it the > value to > > 10 > > > for *POWER_SAVE_DEFAULT but still don't see any power saving... > > > > Check whether it's really set to 10 in > > /sys/modules/snd_hda_intel/parameters/power_save. > > > > Also, the power-save is turned on only when all analog loopback > > switches are off, e.g. Mic Playback Switch or Beep Playback Switch > > must be off. Otherwise the analog part must be powered on. > > > > Takashi > > > > -- > > -Harsha > > > > > > -- > -Harsha > >