From: Takashi Iwai Subject: Re: [PATCH] ALSA: hda - Add mic fixup for Gigabyte BXBT-2807 Date: Tue, 22 Jul 2014 12:27:44 +0200 Message-ID: References: <1406023109-30864-1-git-send-email-drake@endlessm.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id CC1BE2654E4 for ; Tue, 22 Jul 2014 12:27:44 +0200 (CEST) In-Reply-To: <1406023109-30864-1-git-send-email-drake@endlessm.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Daniel Drake Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 22 Jul 2014 10:58:29 +0100, Daniel Drake wrote: > > The Gigabyte BRIX BXBT-2707 is a mini-PC with Realtek ALC283 HDA, > exposing a single headset jack. > > However, the default pin config information only suggests > that one pin is connected: a HP out jack (pin 0x21, default > config 0x04211010). > > The microphone input is behind pin 0x19, which has default > config 0x411111f0 (i.e. unused), so it does not show up in > userspace, and no microphone input is possible via the headset. > > Override the pin config so that the headset mic can be used. The overwritten value looks like the jack-detectable. Is it really so? Many headset jacks don't give the jack detection in the mic pin but relies on the headphone pin jack detection or use vendor-specific way. thanks, Takashi > > Signed-off-by: Daniel Drake > --- > sound/pci/hda/patch_realtek.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 512582b..10f1848 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -4358,6 +4358,7 @@ enum { > ALC255_FIXUP_HEADSET_MODE_NO_HP_MIC, > ALC293_FIXUP_DELL1_MIC_NO_PRESENCE, > ALC292_FIXUP_TPT440_DOCK, > + ALC283_FIXUP_BXBT2807_MIC, > }; > > static const struct hda_fixup alc269_fixups[] = { > @@ -4792,6 +4793,13 @@ static const struct hda_fixup alc269_fixups[] = { > .chained = true, > .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST > }, > + [ALC283_FIXUP_BXBT2807_MIC] = { > + .type = HDA_FIXUP_PINS, > + .v.pins = (const struct hda_pintbl[]) { > + { 0x19, 0x04a110f0 }, > + { }, > + }, > + }, > }; > > static const struct snd_pci_quirk alc269_fixup_tbl[] = { > @@ -5013,6 +5021,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), > SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", ALC269_FIXUP_THINKPAD_ACPI), > SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */ > + SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC), > > #if 0 > /* Below is a quirk table taken from the old code. > -- > 1.9.1 >