From: Takashi Iwai Subject: Re: model needed for Clevo P150HM (Realtek ALC892) Date: Mon, 27 Jun 2011 08:04:47 +0200 Message-ID: References: <4E036C8F.3080709@gmail.com> <4E047441.4010003@gmail.com> <4E05C1B1.50302@gmail.com> <4E05C704.4080806@gmail.com> <4E05CE02.1070801@gmail.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id A89FA246C9 for ; Mon, 27 Jun 2011 08:04:47 +0200 (CEST) In-Reply-To: <4E05CE02.1070801@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Julian Sikorski Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Sat, 25 Jun 2011 14:01:06 +0200, Julian Sikorski wrote: > > W dniu 25.06.2011 13:31, Julian Sikorski pisze: > > W dniu 25.06.2011 13:08, Julian Sikorski pisze: > >> W dniu 25.06.2011 09:11, Takashi Iwai pisze: > >>> At Fri, 24 Jun 2011 13:25:53 +0200, > >>> Julian Sikorski wrote: > >>>> > >>>> On 24/06/2011 11:12, Takashi Iwai wrote: > >>>>> At Fri, 24 Jun 2011 10:34:01 +0200, > >>>>> Takashi Iwai wrote: > >>>>>> > >>>>>> At Thu, 23 Jun 2011 18:40:47 +0200, > >>>>>> Julian Sikorski wrote: > >>>>>>> > >>>>>>> On 23/06/2011 14:41, Takashi Iwai wrote: > >>>>>>>> At Thu, 23 Jun 2011 08:36:55 +0200, > >>>>>>>> Julian Sikorski wrote: > >>>>>>>>> > >>>>>>>>> Hi, > >>>>>>>>> > >>>>>>>>> I am coming here from pulseaudio-general mailing list [1]. I recently > >>>>>>>>> got myself a Clevo P150HM laptop. It has 2.1 speakers, a built-in > >>>>>>>>> microphone and the following connectors: > >>>>>>>>> - headphone out > >>>>>>>>> - microphone in; can be switched to center/lfe out > >>>>>>>>> - spdif out; can be switched to rear speaker out > >>>>>>>>> - line in; can be switched to side speaker out > >>>>>>>>> Alsa does not seem to reflect that the device is capable of 5.1 and 7.1 > >>>>>>>>> sound, and there are two configs showing up in pavucontrol (analog > >>>>>>>>> output and analog headphones) which seem to be the same. I have uploaded > >>>>>>>>> the output of alsa-info.sh [2]. Please let me know if more information > >>>>>>>>> is needed. > >>>>>>>> > >>>>>>>> The current parser doesn't allow the multi-io pins when the primary > >>>>>>>> output is no line-out. The patch below should fix (change) the > >>>>>>>> behavior. It'll count HP out, too. > >>>>>>>> > >>>>>>>> > >>>>>>>> Takashi > >>>>>>>> > >>>>>>>> --- > >>>>>>>> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > >>>>>>>> index fe56b2b..b0cf726 100644 > >>>>>>>> --- a/sound/pci/hda/patch_realtek.c > >>>>>>>> +++ b/sound/pci/hda/patch_realtek.c > >>>>>>>> @@ -18992,6 +18992,7 @@ static int alc662_auto_fill_dac_nids(struct hda_codec *codec, > >>>>>>>> hda_nid_t dac; > >>>>>>>> > >>>>>>>> spec->multiout.dac_nids = spec->private_dac_nids; > >>>>>>>> + spec->multiout.num_dacs = 0; > >>>>>>>> for (i = 0; i< cfg->line_outs; i++) { > >>>>>>>> dac = alc_auto_look_for_dac(codec, cfg->line_out_pins[i]); > >>>>>>>> if (!dac) > >>>>>>>> @@ -19326,8 +19327,20 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec) > >>>>>>>> unsigned int location, defcfg; > >>>>>>>> int num_pins; > >>>>>>>> > >>>>>>>> + if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT&& cfg->hp_outs == 1) { > >>>>>>>> + /* use HP as primary out */ > >>>>>>>> + cfg->speaker_outs = cfg->line_outs; > >>>>>>>> + memcpy(cfg->speaker_pins, cfg->line_out_pins, > >>>>>>>> + sizeof(cfg->speaker_pins)); > >>>>>>>> + cfg->line_outs = cfg->hp_outs; > >>>>>>>> + memcpy(cfg->line_out_pins, cfg->hp_pins, sizeof(cfg->hp_pins)); > >>>>>>>> + cfg->hp_outs = 0; > >>>>>>>> + memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins)); > >>>>>>>> + cfg->line_out_type = AUTO_PIN_HP_OUT; > >>>>>>>> + alc662_auto_fill_dac_nids(codec, cfg); > >>>>>>>> + } > >>>>>>>> if (cfg->line_outs != 1 || > >>>>>>>> - cfg->line_out_type != AUTO_PIN_LINE_OUT) > >>>>>>>> + cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) > >>>>>>>> return 0; > >>>>>>>> > >>>>>>>> defcfg = snd_hda_codec_get_pincfg(codec, cfg->line_out_pins[0]); > >>>>>>>> @@ -19348,6 +19361,8 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec) > >>>>>>>> spec->multi_ios = num_pins; > >>>>>>>> spec->ext_channel_count = 2; > >>>>>>>> spec->multiout.num_dacs = num_pins + 1; > >>>>>>>> + /* for avoiding multi HP mixers */ > >>>>>>>> + cfg->line_out_type = AUTO_PIN_LINE_OUT; > >>>>>>>> } > >>>>>>>> return 0; > >>>>>>>> } > >>>>>>> Would you like me to test this patch? If so, what should I apply it to > >>>>>>> and how should I proceed? > >>>>>> > >>>>>> Yes, the test would be appreciated, of course. > >>>>>> Apply it to the latest 3.0-rc kernel and test. > >>>>> > >>>>> Also, the additional patch below will give "Headphone" mixer control > >>>>> back while new "Surround", "Center" and "LFE" will appear. > >>>>> > >>>>> Note that you'll need to change "Channel Mode" mixer control to "6ch" > >>>>> for using the surround outputs even with these patches. As default, > >>>>> it's set as "2ch". > >>>>> > >>>>> > >>>>> Takashi > >>>>> > >>>> I will definitely try to give this a shot, but the outcome might be > >>>> dependent on the fact whether Fedora 15 will want to work with 3.0-rc > >>>> kernel. > >>> > >>> You can build the kernel by yourself at any time... > >>> > >>>> How about 8-channel sound btw? Under Windows the device claims to be > >>>> capable of it. > >>> > >>> Do you have 4 jacks? Otherwise it's nonsense. > >>> > >>> > >>> Takashi > >> OK, I was able to successfully apply the patch and build the kernel. I > >> tested it using: > >> $ pasuspender bash > >> $ speaker-test -Dplug:surround51 -c6 > >> Once I set sound to 6-channel using alsamixer -c0, I was able to hear > >> the sound for all 6 channels. Setting it to 4 channels took away LFE and > >> center. Pulseaudio outputs are still a little messy, but this is out of > >> ALSA scope, I think. > >> > >> Julian > > It seems I spoke a bit too soon. The superfluous controls are still a > > problem. Speaker and Headphone controls seem to be overlapping (new > > output on amixer -c0 attached). They both control the headphones when > > they are plugged in and internal speakers when not. > > > > Julian > > > Sorry for this email bombardment, but I just booted back to stock F15 > kernel (2.6.38.8-32.fc15.x86_64) and noticed that speaker and headphone > controls actually do what they advertise. Still, it is impossible to > make the sound go through the speakers when headphones are plugged in (I > tried pavucontrol for this). The auto-mute feature can be controlled "Auto-Mute Mode" mixer enum. Set to "Disabled" will turn off the auto-mute in the driver side. However... > The converse might be true though - if you > select "analog headphones" in pavucontrols the speakers go silent. This is what PA does intentionally, independently from the driver auto-mute behavior. Takashi