From: Takashi Iwai Subject: Re: Intel HD: ALC662 noise-bug on FitPC2i Date: Wed, 12 Dec 2012 15:51:23 +0100 Message-ID: References: <1355321775-2042-1-git-send-email-mengdong.lin@intel.com> <50C83190.7050001@aasimon.org> <50C880FC.20409@ladisch.de> <50C88351.3030401@aasimon.org> <50C8989A.3030804@aasimon.org> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id E1999264F1A for ; Wed, 12 Dec 2012 15:51:23 +0100 (CET) In-Reply-To: <50C8989A.3030804@aasimon.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Bent Bisballe Nyeng Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Wed, 12 Dec 2012 15:45:46 +0100, Bent Bisballe Nyeng wrote: > > On 12/12/12 15:25, Takashi Iwai wrote: > > At Wed, 12 Dec 2012 14:14:57 +0100, > > Bent Bisballe Nyeng wrote: > >> > >> On 12/12/12 14:05, Clemens Ladisch wrote: > >>> Bent Bisballe Nyeng wrote: > >>>> When recording, audible clicking sounds are present in the resulting > >>>> audio data. > >>>> > >>>> The corruption are composed of approximately 10 samples, and the > >>>> nature of the corrupted values are such that they could come from an > >>>> earlier buffer (the corrupted data resemble wav forms). > >>> > >>> This looks like a problem with your HDA controller; either the memory > >>> bus is overloaded so that some writes are dropped, or the hardware is > >>> just buggy. > >>> > >>> > >>> Regards, > >>> Clemens > >> > >> I tried to record some audio using windows 7 and here the noise was not > >> present indicating that it is not buggy hardware. > >> > >> Also, the system was not under load when the arecord call was made so if > >> the memory bus was overloaded I need another way to verify this. > >> > >> Are there any additional (useful) debugging info I can subtract from the > >> system that will help aiding the debugging process? > > > > Which sound backend are you using at all? Does the problem appear if > > you run with -Dhw for arecord? > > > > If it's using dsnoop or PulseAudio, the accuracy of DMA position > > reporting plays a big role. In that case, changing position_fix > > option cures often. > > > > Takashi > > There are no sound servers installed on the pc in question (it is a > 'lean' pc) so arecord should be using the hardware directly already. If you are using alsa-lib as is, it must be using dsnoop as default, which is pretty different from hw. Takashi