From: Takashi Iwai Subject: Re: No sound on Quanta KN1 with kernel 3.4 Date: Wed, 18 Apr 2012 21:25:40 +0200 Message-ID: References: <20120416175609.GA22954@zverina> <20120418095545.GA26678@zverina> <20120418113655.GA26938@zverina> <20120418162527.GA27483@zverina> <20120418173335.GA27697@zverina> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id EC5AC243A6 for ; Wed, 18 Apr 2012 21:25:40 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Uros Vampl Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Wed, 18 Apr 2012 20:43:51 +0200, Takashi Iwai wrote: > > At Wed, 18 Apr 2012 19:33:35 +0200, > Uros Vampl wrote: > > > > On 18.04.12 18:41, Takashi Iwai wrote: > > > Ah, does it affect both? > > > What happens if you change the pin 0x10? Does it affect the headphone > > > or speaker output? > > > > Pin 0x0f affects both. Pin 0x10 affects neither. > > > > > Does the headphone output work with 3.4 kernel at all? > > > > No. I always tested both speakers and headphones with each patch (and > > without patches). There was never any sound from either of the two. > > OK. This explains lots. > > > > Also, just to be sure, try the patch below in addition to another. > > > This will disable the COEF setup, and it wasn't applied to previous > > > models. > > > > This patch does the trick! First I tried it with the patch that deletes > > two lines from hda_codec.c, worked already, but there was no Speaker > > control. Then I instead tried with the patch that sets pin 0x0f. Sound > > works and I have a Speaker control. Interesting thing though, the > > Headphone control does nothing and the Speaker control affects both > > speakers and headphones. Maybe pin 0x10 is bogus too. > > > > Also interesting, the Auto-Mute control does nothing. No matter what > > it's set to, when I plug in headphones the speakers go silent. It seems > > the machine has hardware auto-mute handling. > > > > Thank you for your work, I now have sound again! > > The patch below is the integrated fix patch. > Try this one instead of the all previous fixes. > Again with this patch, you'll have only "Master" volume, as both > speaker and headphone share the same pin, thus no individual amps are > present. > > Hopefully this works for you. BTW, has the auto-mute via HP plug ever worked with your machine? If not, try the patch below instead. It might be that your machine needs a similar trick like some other ALC260 laptops. Takashi --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2508f81..7de3502 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1445,6 +1445,13 @@ enum { ALC_FIXUP_ACT_BUILD, }; +static void alc_apply_pincfgs(struct hda_codec *codec, + const struct alc_pincfg *cfg) +{ + for (; cfg->nid; cfg++) + snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val); +} + static void alc_apply_fixup(struct hda_codec *codec, int action) { struct alc_spec *spec = codec->spec; @@ -1478,9 +1485,7 @@ static void alc_apply_fixup(struct hda_codec *codec, int action) snd_printdd(KERN_INFO "hda_codec: %s: " "Apply pincfg for %s\n", codec->chip_name, modelname); - for (; cfg->nid; cfg++) - snd_hda_codec_set_pincfg(codec, cfg->nid, - cfg->val); + alc_apply_pincfgs(codec, cfg); break; case ALC_FIXUP_VERBS: if (action != ALC_FIXUP_ACT_PROBE || !fix->v.verbs) @@ -4861,6 +4866,7 @@ enum { ALC260_FIXUP_GPIO1_TOGGLE, ALC260_FIXUP_REPLACER, ALC260_FIXUP_HP_B1900, + ALC260_FIXUP_KN1, }; static void alc260_gpio1_automute(struct hda_codec *codec) @@ -4888,6 +4894,36 @@ static void alc260_fixup_gpio1_toggle(struct hda_codec *codec, } } +static void alc260_fixup_kn1(struct hda_codec *codec, + const struct alc_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + static const struct alc_pincfg pincfgs[] = { + { 0x0f, 0x02214000 }, /* HP/speaker */ + { 0x12, 0x90a60160 }, /* int mic */ + { 0x13, 0x02a19000 }, /* ext mic */ + { 0x18, 0x01446000 }, /* SPDIF out */ + /* disable bogus I/O pins */ + { 0x10, 0x411111f0 }, + { 0x11, 0x411111f0 }, + { 0x14, 0x411111f0 }, + { 0x15, 0x411111f0 }, + { 0x16, 0x411111f0 }, + { 0x17, 0x411111f0 }, + { 0x19, 0x411111f0 }, + { } + }; + + switch (action) { + case ALC_FIXUP_ACT_PRE_PROBE: + alc_apply_pincfgs(codec, pincfgs); + break; + case ALC_FIXUP_ACT_PROBE: + spec->init_amp = ALC_INIT_NONE; + break; + } +} + static const struct alc_fixup alc260_fixups[] = { [ALC260_FIXUP_HP_DC5750] = { .type = ALC_FIXUP_PINS, @@ -4938,7 +4974,13 @@ static const struct alc_fixup alc260_fixups[] = { .v.func = alc260_fixup_gpio1_toggle, .chained = true, .chain_id = ALC260_FIXUP_COEF, - } + }, + [ALC260_FIXUP_KN1] = { + .type = ALC_FIXUP_FUNC, + .v.func = alc260_fixup_kn1, + .chained = true, + .chain_id = ALC260_FIXUP_GPIO1_TOGGLE, + }, }; static const struct snd_pci_quirk alc260_fixup_tbl[] = { @@ -4948,6 +4990,7 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750), SND_PCI_QUIRK(0x103c, 0x30ba, "HP Presario B1900", ALC260_FIXUP_HP_B1900), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FIXUP_GPIO1), + SND_PCI_QUIRK(0x152d, 0x0729, "Quanta KN1", ALC260_FIXUP_KN1), SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER), SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF), {}