From: Takashi Iwai Subject: Re: [PATCH 0/4] Intel HDMI audio fixes Date: Wed, 11 Feb 2009 23:42:00 +0100 Message-ID: References: <20090211072227.760779741@intel.com> <20090211223241.GA31322@csy.ca> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 832981038C9 for ; Wed, 11 Feb 2009 23:42:00 +0100 (CET) In-Reply-To: <20090211223241.GA31322@csy.ca> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Shane W Cc: alsa-devel@alsa-project.org, Wu Fengguang List-Id: alsa-devel@alsa-project.org At Wed, 11 Feb 2009 14:32:41 -0800, Shane W wrote: > > On Wed, Feb 11, 2009 at 03:22:27PM +0800, Wu Fengguang wrote: > > Shane: the first two patches should address the two bugs you reported, i.e. > > - multi-channel HDMI audio playback problem > > - first half-second audio samples missing > > These two bugs was reproduced and fixed in the combination of > > G35 SDVO HDMI + Yamaha RX-V1800 AV receiver. The first problem cannot be > > verified in G45 system because we still cannot make G45 work with > > Yamaha. The second problem is interesting in that it can be fixed by the > > second patch in G35, but still remains in G45. > > Hi, > > Ok mixed results here. I'm using this for my test signal: > http://www.csy.ca/~shane/51test.wav > > when using: > aplay -D hw:0,3 51test.wav > > Front and rear left and right are correct but centre is > missing. The order in the wav is: > front left > centre > front right > rear left > rear right > sub buz The order assumed here doesn't match with ALSA mapping. In ALSA, front left front right rear left rear right center LFE Better to test with speaker-test program whether the mapping is correct. Takashi