From: Takashi Iwai Subject: Re: [PATCH] ALSA: hda - restore BCLK M/N values when resuming HSW/BDW display controller Date: Thu, 26 Jun 2014 10:47:42 +0200 Message-ID: References: <1403768236-3294-1-git-send-email-mengdong.lin@intel.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 34DE5265005 for ; Thu, 26 Jun 2014 10:47:43 +0200 (CEST) In-Reply-To: <1403768236-3294-1-git-send-email-mengdong.lin@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: mengdong.lin@intel.com Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Thu, 26 Jun 2014 15:37:16 +0800, mengdong.lin@intel.com wrote: > > From: Mengdong Lin > > For Intel Haswell/Broadwell display HD-A controller, the 24MHz HD-A link BCLK > is converted from Core Display Clock (CDCLK): BCLK = CDCLK * M / N > And there are two registers EM4 and EM5 to program M, N value respectively. > The EM4/EM5 values will be lost and when the display power well is disabled. > > BIOS programs CDCLK selected by OEM and EM4/EM5, but BIOS has no idea about > display power well on/off at runtime. So the M/N can be wrong if non-default > CDCLK is used when the audio controller resumes, which results in an invalid > BCLK and abnormal audio playback rate. So this patch saves and restores valid > M/N values on controller suspend/resume. Can this be the cause of bko#74861? https://bugzilla.kernel.org/show_bug.cgi?id=74861 > > Signed-off-by: Mengdong Lin > > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c > index bb65a124..90a2750 100644 > --- a/sound/pci/hda/hda_intel.c > +++ b/sound/pci/hda/hda_intel.c > @@ -580,6 +580,18 @@ static int param_set_xint(const char *val, const struct kernel_param *kp) > #define azx_del_card_list(chip) /* NOP */ > #endif /* CONFIG_PM */ > > +static void haswell_save_bclk(struct azx *chip) > +{ > + chip->bclk_m = azx_readw(chip, EM4); > + chip->bclk_n = azx_readw(chip, EM5); > +} > + > +static void haswell_restore_bclk(struct azx *chip) > +{ > + azx_writew(chip, EM4, chip->bclk_m); > + azx_writew(chip, EM5, chip->bclk_n); > +} This is HSW/BDW specific, so we should avoid adding new fields in struct azx. Instead, define struct hda_intel in hda_intel.c, struct hda_intel { struct azx chip; /* HSW/BDW display HDA controller to restore BCLK from CDCLK */ unsigned int bclk_m; unsigned int bclk_n; }; then change azx_create() to allocate struct hda_intel instead of struct azx. struct hda_intel *hda; hda = kzalloc(sizeof(*hda), GFP_KERNEL); if (!hda) { ... } chip = &hda->chip; spin_lock_init(&chip->reg_lock); mutex_init(&chip->open_mutex); chip->card = card; ... and access to bclk_m and bclk_n via cast using container_of(). static void haswell_save_bclk(struct azx *chip) { struct hda_intel *hda = container_of(chip, struct hda_intel, chip); hda->bclk_m = azx_readw(chip, EM4); hda->bclk_n = azx_readw(chip, EM5); } > + > #if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO) > /* > * power management > @@ -606,6 +618,13 @@ static int azx_suspend(struct device *dev) > free_irq(chip->irq, chip); > chip->irq = -1; > } > + > + /* Save BCLK M/N values before they become invalid in D3. > + * Will test if display power well can be released now. > + */ > + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) > + haswell_save_bclk(chip); > + > if (chip->msi) > pci_disable_msi(chip->pci); > pci_disable_device(pci); > @@ -625,8 +644,10 @@ static int azx_resume(struct device *dev) > if (chip->disabled) > return 0; > > - if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) > + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { > hda_display_power(true); > + haswell_restore_bclk(chip); > + } > pci_set_power_state(pci, PCI_D0); > pci_restore_state(pci); > if (pci_enable_device(pci) < 0) { > @@ -670,8 +691,10 @@ static int azx_runtime_suspend(struct device *dev) > azx_stop_chip(chip); > azx_enter_link_reset(chip); > azx_clear_irq_pending(chip); > - if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) > + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { > + haswell_save_bclk(chip); > hda_display_power(false); > + } > return 0; > } > > @@ -689,8 +712,10 @@ static int azx_runtime_resume(struct device *dev) > if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) > return 0; > > - if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) > + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { > hda_display_power(true); > + haswell_restore_bclk(chip); > + } > > /* Read STATESTS before controller reset */ > status = azx_readw(chip, STATESTS); > diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h > index 4a7cb01..1469edb 100644 > --- a/sound/pci/hda/hda_priv.h > +++ b/sound/pci/hda/hda_priv.h > @@ -96,6 +96,14 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; > #define ICH6_REG_SD_BDLPL 0x18 > #define ICH6_REG_SD_BDLPU 0x1c > > +/* Intel HSW/BDW display HD-A controller Extended Mode registers. > + * EM4 (M value) and EM5 (N Value) are used to convert CDClk (Core Display > + * Clock) to 24MHz BCLK: BCLK = CDCLK * M / N > + * The values will be lost when the display power well is disabled. > + */ > +#define ICH6_REG_EM4 0x100c > +#define ICH6_REG_EM5 0x1010 These are definitely not for ICH6. Define them rather in hda_intel.c. I'm going to move more other PCI-controller specific things from hda_priv.h into hda_intel.c, too. Also, I guess this deserves for Cc to stable, right? thanks, Takashi