From: Takashi Iwai Subject: Re: HDMI hotplug on Skylake when power well is off Date: Wed, 15 Jul 2015 12:59:02 +0200 Message-ID: References: <55A62252.1050506@canonical.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 9584B265A66 for ; Wed, 15 Jul 2015 12:59:02 +0200 (CEST) In-Reply-To: <55A62252.1050506@canonical.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: David Henningsson Cc: libin.yang@intel.com, "Lin, Mengdong" , "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org On Wed, 15 Jul 2015 11:05:22 +0200, David Henningsson wrote: > > Hi, > > I'm trying to debug an issue here where the HDMI hotplug events are not > delivered to the audio side when the power well is off. This is on a > Skylake machine (running in HDA mode). > > I'm not sure whether the problem is upstream or due to my own patches > while testing, so I was wondering how this is supposed to be working, so > I can troubleshoot further? > > Should there be an IRQ on the HDA controller even if the power well is > off, and if not, how should the audio driver be notified that an HDMI > hotplug event has happened? I thought this has been always a problem when the runtime PM is enabled, no matter whether the power well state is. IMO, a cleaner solution would be rather the notifier implementation in software, e.g. extend the i915 component to pass the audio side ops for notification. Takashi