From: Takashi Iwai Subject: Re: usb quattro Date: Wed, 04 Sep 2002 16:41:54 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <3D761979.5050707@boosthardware.com> Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <3D761979.5050707@boosthardware.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Patrick Shirkey Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Wed, 04 Sep 2002 23:32:25 +0900, Patrick Shirkey wrote: > > I have just found that the quattro will not output an audible stream > from the external input channels until it has been made to output a > stream through the internal i/o first. > > This means that the direct monitor switch does not work until a file is > played internally through the card. > > After that everything works as expected. > > Is this a fixable bug or should I make a note in the online docs about it? could you check whether only hw_params() (prepare()) sets up enough, or do you really need to feed data to the output? (although i'm not sure, too, what is missing there...) Takashi ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390