From: Takashi Iwai Subject: Re: [regression] probably in mixer.c code Date: Tue, 08 Nov 2011 14:09:31 +0100 Message-ID: References: <4EB8ED09.2090301@fisher-privat.net> <4EB91192.8030906@fisher-privat.net> <4EB9230A.1040607@fisher-privat.net> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id B37D41038E0 for ; Tue, 8 Nov 2011 14:09:31 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Alexey Fisher Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 08 Nov 2011 14:05:32 +0100, Takashi Iwai wrote: > > At Tue, 08 Nov 2011 13:39:38 +0100, > Alexey Fisher wrote: > > > > Am 08.11.2011 13:11, schrieb Takashi Iwai: > > > At Tue, 08 Nov 2011 12:25:06 +0100, > > > Alexey Fisher wrote: > > >> > > >> Am 08.11.2011 10:59, schrieb Takashi Iwai: > > >>> At Tue, 08 Nov 2011 09:49:13 +0100, > > >>> Alexey Fisher wrote: > > >>>> > > >>>> Hallo all, Takashi, > > >>>> > > >>>> there is one regression in current linux main tree: > > >>>> > > >>>> cval->res quirks do not work any more. See usb/mixer.c:1150 > > >>>> Are there was some work in this area or may be some one bisected this > > >>>> bug down? > > >>> > > >>> Are you referring to the device 046d:09a4, which sets the mixer range > > >>> manually? If yes, does the patch below work? > > >>> > > >> > > >> > > >> No, i referring to devices 046d:0991, 046d:081d, i don't have access to > > >> 046d:09a4. > > >> > > >> This part is broken for me: > > >> case USB_ID(0x046d, 0x0991): > > >> /* Most audio usb devices lie about volume resolution. > > >> * Most Logitech webcams have res = 384. > > >> * Proboly there is some logitech magic behind this number --fishor > > >> */ > > >> if (!strcmp(kctl->id.name, "Mic Capture Volume")) { > > >> snd_printk(KERN_INFO > > >> "set resolution quirk: cval->res = 384\n"); > > >> cval->res = 384; > > >> } > > >> break; > > > > > > OK, so _what_ is actually broken? Do you see the message but > > > cval->res is overridden later? > > > > yes. > > To which value? Also you should have got a message like "0:1: cannot get min/max values for ..." when built with CONFIG_SND_DEBUG. Check whether you get it actually. Takashi