From: Takashi Iwai Subject: Re: Multistreaming Playback using Front Panel Headphone with realtek codec Date: Thu, 05 May 2011 11:54:28 +0200 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (cantor.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id 4028B10393D for ; Thu, 5 May 2011 11:54:29 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Raymond Yau Cc: ALSA Development Mailing List List-Id: alsa-devel@alsa-project.org At Wed, 4 May 2011 23:42:24 +0800, Raymond Yau wrote: > > Request for testers to test the patch > > Multistreaming allows you to listen to one audio source through the back > panel speakers and a second audio source through front panel headphones or > speakers. > > Hardware requirement > 1) 10 channels realtek codec (e.g. alc892) which already work with > model=auto > 2) Headphone at front panel and Line out at rear panel > > "hw:0,0" is used for the rear panel audio jack > "hw:0,2" is used for the front panel headphone when "Independent HP" is > switched ON I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and "Independent", or such. An enum with "ON" and "OFF" is no sensible choice. Takashi