From: Takashi Iwai Subject: Re: [PATCH v2] ASoC: codec: hdac_hdmi add device_link to card device Date: Tue, 16 Apr 2019 12:23:46 +0200 Message-ID: References: <1555161492-9143-1-git-send-email-libin.yang@intel.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (mx2.suse.de [195.135.220.15]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 23A67F896E2 for ; Tue, 16 Apr 2019 12:23:46 +0200 (CEST) In-Reply-To: <1555161492-9143-1-git-send-email-libin.yang@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" To: libin.yang@intel.com Cc: alsa-devel@alsa-project.org, broonie@kernel.org, pierre-louis.bossart@linux.intel.com List-Id: alsa-devel@alsa-project.org On Sat, 13 Apr 2019 15:18:12 +0200, libin.yang@intel.com wrote: > > From: Libin Yang > > In resume from S3, HDAC HDMI codec driver dapm event callback may be > operated before HDMI codec driver turns on the display audio power > domain because of the contest between display driver and hdmi codec driver. > > This patch adds the device_link between soc card device (consumer) and > hdmi codec device (supplier) to make sure the sequence is always correct. > > Signed-off-by: Libin Yang Reviewed-by: Takashi Iwai Is it an issue that has been present for older released kernels? If so, it deserves for Cc-to-stable. thanks, Takashi > --- > sound/soc/codecs/hdac_hdmi.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c > index 5eeb0fe..4de1fbf 100644 > --- a/sound/soc/codecs/hdac_hdmi.c > +++ b/sound/soc/codecs/hdac_hdmi.c > @@ -1855,6 +1855,17 @@ static int hdmi_codec_probe(struct snd_soc_component *component) > hdmi->card = dapm->card->snd_card; > > /* > + * Setup a device_link between card device and HDMI codec device. > + * The card device is the consumer and the HDMI codec device is > + * the supplier. With this setting, we can make sure that the audio > + * domain in display power will be always turned on before operating > + * on the HDMI audio codec registers. > + * Let's use the flag DL_FLAG_AUTOREMOVE_CONSUMER. This can make > + * sure the device link is freed when the machine driver is removed. > + */ > + device_link_add(component->card->dev, &hdev->dev, DL_FLAG_RPM_ACTIVE | > + DL_FLAG_AUTOREMOVE_CONSUMER); > + /* > * hdac_device core already sets the state to active and calls > * get_noresume. So enable runtime and set the device to suspend. > */ > -- > 2.7.4 >