From: Takashi Iwai Subject: Re: [PATCH] sound: sb: fix a missing check of snd_ctl_add Date: Tue, 01 Jan 2019 09:55:33 +0100 Message-ID: References: <20181226014534.71083-1-kjlu@umn.edu> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 40D05267B9C for ; Tue, 1 Jan 2019 09:55:34 +0100 (CET) In-Reply-To: <20181226014534.71083-1-kjlu@umn.edu> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Kangjie Lu Cc: alsa-devel@alsa-project.org, pakki001@umn.edu, linux-kernel@vger.kernel.org List-Id: alsa-devel@alsa-project.org On Wed, 26 Dec 2018 02:45:32 +0100, Kangjie Lu wrote: > > snd_ctl_add() could fail, so let's check its return value and return its > error code upstream upon failure. > > Signed-off-by: Kangjie Lu > --- > sound/isa/sb/sb16_main.c | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c > index 37e6ce7b0b13..c9b25dc1f78e 100644 > --- a/sound/isa/sb/sb16_main.c > +++ b/sound/isa/sb/sb16_main.c > @@ -879,8 +879,14 @@ int snd_sb16dsp_pcm(struct snd_sb *chip, int device) > snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sb16_playback_ops); > snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_sb16_capture_ops); > > - if (chip->dma16 >= 0 && chip->dma8 != chip->dma16) > - snd_ctl_add(card, snd_ctl_new1(&snd_sb16_dma_control, chip)); > + if (chip->dma16 >= 0 && chip->dma8 != chip->dma16) { > + err = > + snd_ctl_add(card, > + snd_ctl_new1(&snd_sb16_dma_control, > + chip)); > + if (err < 0) > + return err; > + } > else > pcm->info_flags = SNDRV_PCM_INFO_HALF_DUPLEX; The code change looks OK, but could you fix the indentation and avoid unneeded line breaks, as well as the missing braces for else-block? Also, we keep "ALSA:" prefix for the subject line (except for ASoC ones). Please align with it. thanks, Takashi