From: Takashi Iwai Subject: Re: [PATCH v4 00/12] Line6 POD X3/X3Live suport Date: Mon, 19 Sep 2016 23:07:34 +0200 Message-ID: References: <1470942147-19848-1-git-send-email-dev@andree.sk> <1474225172-32081-1-git-send-email-dev@andree.sk> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 734EA266569 for ; Mon, 19 Sep 2016 23:07:34 +0200 (CEST) In-Reply-To: <1474225172-32081-1-git-send-email-dev@andree.sk> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Andrej Krutak Cc: stefanha@gmail.com, alsa-devel@alsa-project.org, grabner@icg.tugraz.at List-Id: alsa-devel@alsa-project.org On Sun, 18 Sep 2016 20:59:20 +0200, Andrej Krutak wrote: > > Hello all, > > > attached are the yet again reworked patches. Basically the diff is only some > formatting. In addition, some of the previously big patches were split to > multiple smaller ones. Compared to v3, there is a small bisectability/patch > sanity fix. > > I have checked that after each one, the compilation works, but not that the > result doesn't segfault or even work - I don't have the hardware previously > supported by the driver and the most interesting changes are only useful as > a whole for POD X3. > > Greetings! > > > Andrej Krutak (12): > ALSA: line6: Enable different number of URBs for frame transfers > ALSA: line6: Add high-speed USB support > ALSA: line6: Support assymetrical in/out configurations > ALSA: line6: Allow different channel numbers for in/out > ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during > capture > ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer > (int EP) > ALSA: line6: Allow processing of raw incoming messages > ALSA: line6: Add support for POD X3 > ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD > X3) > ALSA: line6: Only determine control port properties if needed > ALSA: line6: Cleanup podhd initialization > ALSA: line6: Add hwdep interface to access the POD control messages OK, now all patches look almost good, so I applied them with a few manual fixes of coding style issues checkpatch.pl copmlained, as well as a fix of bit field type in patch 12. Thanks! Takashi