From: Takashi Iwai Subject: Re: Maximum buffer size on HDA Date: Mon, 16 Jun 2008 14:11:19 +0200 Message-ID: References: <20080613191303.GA3899@tango.0pointer.de> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id E43D92458D for ; Mon, 16 Jun 2008 14:11:20 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Jaroslav Kysela Cc: alsa-devel@alsa-project.org, Lennart Poettering List-Id: alsa-devel@alsa-project.org At Mon, 16 Jun 2008 12:53:11 +0200 (CEST), Jaroslav Kysela wrote: > > On Mon, 16 Jun 2008, Takashi Iwai wrote: > > > At Fri, 13 Jun 2008 21:13:03 +0200, > > Lennart Poettering wrote: > > > > > > Heya, > > > > > > the HDA driver allows a playback buffer size of something like 64K > > > onyl. Is this a driver limitation or a limitation of the hardware? > > > Skimming through the docs I cannot see anything like this, and I got > > > the idea that the audio buffer is maintained in system memory, not > > > sound card memory, so why this limit? > > > > This comes from the buffer pre-allocator. > > Run the below: > > > > # echo 1024 > /proc/asound/card0/pcm0p/sub0/prealloc > > > > then you can use now 1MB buffer. snd-hda-intel has max > > pre-allocation buffer size 1MB, and this is the hard-coded limit. > > > > It's rather a silly constraint, and I think it'd be better cut off. > > OTOH, this makes the system safer (e.g. avoiding page allocations for > > too large buffers), and there is a proper workaround, too. > > So, I'm open about this change, so far. > > Which workaround you're talking about? Reset a proc file manually like the above. Without this, you cannot allocate the buffer over the pre-allocated size. Takashi