From: Takashi Iwai Subject: Re: Constant noise on HDA ALC275 Date: Mon, 08 Oct 2012 17:24:42 +0200 Message-ID: References: <87obl7bg02.fsf@dex.adm.naquadah.org> <87wqznim1k.fsf@dex.adm.naquadah.org> <87pq5fiklg.fsf@dex.adm.naquadah.org> <87haqrijiz.fsf@dex.adm.naquadah.org> <87d31fii3v.fsf@dex.adm.naquadah.org> <874nmried6.fsf@dex.adm.naquadah.org> <87vcf7gyl5.fsf@dex.adm.naquadah.org> <87r4pvgxvx.fsf@dex.adm.naquadah.org> <87r4pepcgo.fsf@dex.adm.naquadah.org> <87zk3xku73.fsf@dex.adm.naquadah.org> <87fw5pktos.fsf@dex.adm.naquadah.org> <5072E5A7.9040701@canonical.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 4094D261983 for ; Mon, 8 Oct 2012 17:24:45 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Julien Danjou Cc: alsa-devel@alsa-project.org, David Henningsson List-Id: alsa-devel@alsa-project.org At Mon, 08 Oct 2012 17:07:44 +0200, Takashi Iwai wrote: > > At Mon, 08 Oct 2012 16:39:35 +0200, > David Henningsson wrote: > > > > On 10/08/2012 03:11 PM, Takashi Iwai wrote: > > > At Mon, 08 Oct 2012 14:57:23 +0200, > > > Julien Danjou wrote: > > >> > > >> On Mon, Oct 08 2012, Takashi Iwai wrote: > > >> > > >>> It's interesting. So, _unmuting_ the input from NID 0x1d removes the > > >>> noise? (0x80 means the channel is muted.) > > >> > > >> Yes, that's it. > > >> > > >> (I just unloaded and reloaded the module and rechecked). > > > > > > OK, then could you try the patch below? > > > > > > > > > Takashi > > > > > > --- > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > index 8568aee..42dd605 100644 > > > --- a/sound/pci/hda/patch_realtek.c > > > +++ b/sound/pci/hda/patch_realtek.c > > > @@ -5988,10 +5988,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, > > > } > > > } > > > > > > +static void alc275_fixup_vaio_mixer(struct hda_codec *codec, > > > + const struct alc_fixup *fix, int action) > > > +{ > > > + /* _UN_muting the input from NID 0x1d fixes the mysterious speaker > > > + * noise on Sony VAIO Z > > > + */ > > > + if (action == ALC_FIXUP_ACT_INIT) > > > + snd_hda_codec_write(codec, 0x0b, 0, > > > + AC_VERB_SET_AMP_GAIN_MUTE, > > > + AMP_IN_UNMUTE(4)); > > > +} > > > > Hmm, isn't it easier just to toggle "Beep Playback Switch"? > > Good point. I'm actually not sure whether the 0x1d is supposed to be > beep on ALC275 as well. It's been so for ALC269, but ALC275 might be > different. In other words: Julien, could you check whether beep volume from speaker/headphone changes when you adjust "Beep" volume in alsa mixer? Takashi