From: Takashi Iwai Subject: Re: Multistreaming Playback using Front Panel Headphone with realtek codec Date: Fri, 06 May 2011 07:28:24 +0200 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (cantor.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id 9288C103849 for ; Fri, 6 May 2011 07:28:25 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Raymond Yau Cc: ALSA Development Mailing List List-Id: alsa-devel@alsa-project.org At Fri, 6 May 2011 11:30:16 +0800, Raymond Yau wrote: > > 2011/5/5 Takashi Iwai > > > At Wed, 4 May 2011 23:42:24 +0800, > > Raymond Yau wrote: > > > > > > Request for testers to test the patch > > > > > > Multistreaming allows you to listen to one audio source through the back > > > panel speakers and a second audio source through front panel headphones > > or > > > speakers. > > > > > > Hardware requirement > > > 1) 10 channels realtek codec (e.g. alc892) which already work with > > > model=auto > > > 2) Headphone at front panel and Line out at rear panel > > > > > > "hw:0,0" is used for the rear panel audio jack > > > "hw:0,2" is used for the front panel headphone when "Independent HP" is > > > switched ON > > > > I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and > > "Independent", or such. An enum with "ON" and "OFF" is no sensible choice. > > > > > > Takashi > > > > Use "Independent HP" just because patch_via.c already used it so it is > better to use a standard name for all hda codecs Yeah, I know. But this name is confusing, so better to change in patch_via.c as well. Takashi