From: Takashi Iwai Subject: Re: VT1708 clicks & pops Date: Tue, 20 Sep 2011 09:22:23 +0200 Message-ID: References: <20110916203601.GD8309@alittletooquiet.net> <20110919231413.GD1223@alittletooquiet.net> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id C9F0510390E for ; Tue, 20 Sep 2011 09:22:25 +0200 (CEST) In-Reply-To: <20110919231413.GD1223@alittletooquiet.net> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Forest Bond Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Mon, 19 Sep 2011 19:14:13 -0400, Forest Bond wrote: > > Hi, > > On Fri, Sep 16, 2011 at 04:36:01PM -0400, Forest Bond wrote: > > I have two boards with a VT1708: > > > > * VIA EPIA EX15000G > > * VIA VB8002 > > > > I'm using VLC to play audio via PulseAudio to the analog outputs. The VB8002 > > sounds great, but the EX15000G has random pops and clicks in the output. Both > > machines are running exactly the same configuration (they are using the same > > pre-built OS image). > > Maybe this issue would be more approachable if I could produce it without > PulseAudio involved? Yes. > Incidentally, these boards both produce a crackling/static sound when PulseAudio > is playing and the PCM mixer is turned all the way down. I have seen scattered > reports of this in various bug trackers. The problem does not occur when > playing via alsa directly. One thing I have noticed is that the crackling noise > follows the rhythm of the music being played. It actually sounds like the music > has been heavily distorted (i.e. via extreme digital clipping) and then > attenuated significantly. > > It seems likely that there are driver issues that PulseAudio is exposing. What > can I do to track them down? Is the problem related with the driver version? You mentioned the difference of drivers installed on your systems. If it's a regression of the driver, it'd be easier to figure out. Other than that, I'd try to adjust PA, e.g. try tsched=0. Usually this kind of problem is because of inaccurate playback position reporting from the hardware. PA relies (too much) on the playback position as default. Takashi