From: Takashi Iwai Subject: Re: Constant noise on HDA ALC275 Date: Fri, 21 Sep 2012 16:00:42 +0200 Message-ID: References: <87obl7bg02.fsf@dex.adm.naquadah.org> <87wqznim1k.fsf@dex.adm.naquadah.org> <87pq5fiklg.fsf@dex.adm.naquadah.org> <87haqrijiz.fsf@dex.adm.naquadah.org> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 5C46A265D1C for ; Fri, 21 Sep 2012 16:00:42 +0200 (CEST) In-Reply-To: <87haqrijiz.fsf@dex.adm.naquadah.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Julien Danjou Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Fri, 21 Sep 2012 15:37:40 +0200, Julien Danjou wrote: > > On Fri, Sep 21 2012, Takashi Iwai wrote: > > > It's something like: > > hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x00 > > to turn off, and > > This completely shuts down the speaker: no noise, but no sound at all if > I play something. > > > hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x02 > > to turn on. > > That makes it back to normal, with noise. :) > > > Also, try to mute all sources in NID 0x0b, > > hda-verb /dev/snd/hw0D0 0x0b SET_AMP 0x7480 > > This seems to not change anything at all. OK, then could you give the alsa-info.sh output at the state where the speaker makes noise? The one you attached is apparently without the speaker. Takashi