From: Takashi Iwai Subject: Re: [PATCH] ALSA: hda - Add DeviceID for Haswell HDA Date: Mon, 16 Jul 2012 16:05:09 +0200 Message-ID: References: <1339554232-3410-1-git-send-email-xingchao.wang@intel.com> <50005F66.3050401@perex.cz> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 52235265061 for ; Mon, 16 Jul 2012 19:24:03 +0200 (CEST) In-Reply-To: <50005F66.3050401@perex.cz> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Jaroslav Kysela Cc: alsa-devel@alsa-project.org, Wang Xingchao List-Id: alsa-devel@alsa-project.org At Fri, 13 Jul 2012 19:48:22 +0200, Jaroslav Kysela wrote: > > Date 13.6.2012 08:46, Takashi Iwai wrote: > > At Wed, 13 Jun 2012 10:23:51 +0800, > > Wang Xingchao wrote: > >> > >> this patch add proper id for Haswell HDA Controller. > >> > >> Signed-off-by: Wang Xingchao > > > > Oh, now ID number decreases to 0xxx? :) > > > > While we are on this: could you verify whether position_fix=4 (combo) > > options works for Haswell? In this mode, LPIB is used for playback > > positioning while POS buffer is used for capture. > > > > Seth (Cc'ed) figured out that this mode works better than the default > > (usually POS buf both for playback and capture) on the recent Intel > > controller chips, so I guess it'd be applied to Haswell, too. > > The combo works OK for the Haswell. I think that the patch should be > applied with the HDMI ID patch "[PATCH] ALSA: hda - add Haswell HDMI pci > id". > > Acked-by: Jaroslav Kysela OK, applied patches with the combo fix now. Thanks! Takashi