From: Takashi Iwai Subject: Re: Internal speaker output from Sony Vaio Z (2010 model) lost somewhere between 3.1.0 and 3.2.6 Date: Sat, 17 Mar 2012 11:00:33 +0100 Message-ID: References: <1331939409.22414.29.camel@adam> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id D56EC103D08 for ; Sat, 17 Mar 2012 11:00:35 +0100 (CET) In-Reply-To: <1331939409.22414.29.camel@adam> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Adam Williamson Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Fri, 16 Mar 2012 16:10:09 -0700, Adam Williamson wrote: > > Welp, pretty much as the topic says. > > I just noticed today that sound is no longer playing from the internal > speakers of my laptop, a 2010 model Sony Vaio Z. Plugging in headphones > causes sound to be played fine through those. There are three possible > choices for 'Connector' - 'Analog Speakers', 'Analog Output', and > 'Analog Headphones' - but none of these seems to make sound come out of > the internal speakers. The default is 'Analog Speakers', and when it's > set to this, headphone output does work when headphones are plugged in. > > I've verified that it's broken on Fedora 16 kernels 3.2.6-4, 3.2.8-3 and > 3.2.10-1. It's also broken in a very recent Fedora 17 kernel, 3.3.0rc6 > or so. It works on a Fedora 16 live image, with kernel 3.1.0-1. > Unfortunately the kernels before 3.2.6 have been trashed from Fedora's > buildsystem archives, I think, so it's hard to narrow things down any > further :/ > > the alsa-info output is > http://www.alsa-project.org/db/?f=368e2359757b537d4daa0f5399830d3942540196 . At best, please provide the alsa-info.sh on the working kernel, too. You could install 3.1.x in addition to the current one just to check whether it works (i.e. no user-space side problem). The codec amp values for the speaker pin in the alsa-info.sh output above looks OK, so the problem is something else such as GPIO. In the case of GPIO, it can be turned on/off by hda-verb, e.g. hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x01 hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x01 hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x01 and/or hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x02 hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x02 hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x02 Takashi