From: Takashi Iwai Subject: Re: model needed for Clevo P150HM (Realtek ALC892) Date: Fri, 01 Jul 2011 21:25:36 +0200 Message-ID: References: <4E036C8F.3080709@gmail.com> <4E047441.4010003@gmail.com> <4E05C1B1.50302@gmail.com> <4E05C704.4080806@gmail.com> <4E05CE02.1070801@gmail.com> <4E082166.5060902@gmail.com> <4E08E33D.3060608@gmail.com> <4E0B62B6.6000007@gmail.com> <4E0B6BE0.1010003@gmail.com> <4E0B7D22.3040009@gmail.com> <4E0C17F2.5070704@gmail.com> <4E0CABBC.3070801@gmail.com> <4E0CBBED.9050501@gmail.com> <4E0CD984.9050408@gmail.com> <4E0E1893.80206@gmail.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 1145E10380B for ; Fri, 1 Jul 2011 21:25:37 +0200 (CEST) In-Reply-To: <4E0E1893.80206@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Julian Sikorski Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Fri, 01 Jul 2011 20:57:23 +0200, Julian Sikorski wrote: > > W dniu 01.07.2011 09:32, Takashi Iwai pisze: > > At Fri, 01 Jul 2011 07:21:34 +0200, > > Takashi Iwai wrote: > >> > >> At Thu, 30 Jun 2011 22:16:04 +0200, > >> Julian Sikorski wrote: > >>> > >>> It works, thanks! In more detail, the Speaker/Headphone situation is > >>> back to 2.6.38 state - you can regulate them independently, but muting > >>> one mutes the other. LFE/Center and Surround keep working correctly too. > >>> The new output of alsa-info.sh: > >>> http://www.alsa-project.org/db/?f=45bc0df9747371b348bde6c4aa508b2ba44aff47 > >> > >> Right, it's because ALC892 has no mute-control in pin widgets but > >> only in the mixer widget. And HP and speaker paths share the same > >> mixer, thus it's impossible to mute independently. > > > > I seem to have lied. It should be possible, and the emulator shows it > > must be working well. > > > > Do I understand correctly that the problem is that both HP and speaker > > outputs are muted simultaneously when you either of "Headphone" or > > "Speaker" mixer switch is muted? > > > > If so, please give alsa-info.sh outputs at the problematic state, i.e. > > the speaker gets muted by the headphone mixer switch or vice versa, > > just to confirm. > > > > > > thanks, > > > > Takashi > Here you go: > http://www.alsa-project.org/db/?f=c8f1e149c155ed950aea1a7327a5800fc2b61da2 > I muted the speakers and the headphones went silent. Hm, I see no obvious problem in the codec tree and alsa mixers. Could you check whether the playback without PulseAudio has the same issue? Try pasuspender, e.g. % pasuspender aplay -Dplughw foo.wav (Depending on the version of PA, you might need to put '--' between pasuspender and aplay.) Takashi