From: Takashi Iwai Subject: Re: S24_LE Mode for USB Driver Date: Wed, 13 Aug 2008 12:04:43 +0200 Message-ID: References: <489B5A4E.3040903@ieee.org> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (ns2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 6972210386B for ; Wed, 13 Aug 2008 12:04:44 +0200 (CEST) In-Reply-To: <489B5A4E.3040903@ieee.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: charles.eidsness@ieee.org Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Thu, 07 Aug 2008 16:25:50 -0400, Charles Eidsness wrote: > > Hi All, > > It looks like the parse_audio_format_i_type function at line 2369 of usbaudio.c > (linux v2.6.23) doesn't support the case where bSubframeSize (fmt[5]) = 4 bytes > and bBitResolution (fmt[6]) = 24 bits, which should correspond to a S24_LE (or > BE) type. I'm developing a new USD DAC which supports this mode (24-bit sample > in a 4 byte package). Right now Linux sends me S32_LE formated data, which is > wrong. Would it be possible to expand this function to support S24_LE/BE? It > would only require adding a few lines of code. Yes, it's possible, of course. BTW, is this behavior strictly defined? I fail to find in the usb-audio spec that bBitResolution specifies the lower bits, not the higher bits... thanks, Takashi