From: Takashi Iwai Subject: Re: Constant noise on HDA ALC275 Date: Mon, 08 Oct 2012 21:28:20 +0200 Message-ID: References: <87obl7bg02.fsf@dex.adm.naquadah.org> <87pq5fiklg.fsf@dex.adm.naquadah.org> <87haqrijiz.fsf@dex.adm.naquadah.org> <87d31fii3v.fsf@dex.adm.naquadah.org> <874nmried6.fsf@dex.adm.naquadah.org> <87vcf7gyl5.fsf@dex.adm.naquadah.org> <87r4pvgxvx.fsf@dex.adm.naquadah.org> <87r4pepcgo.fsf@dex.adm.naquadah.org> <87zk3xku73.fsf@dex.adm.naquadah.org> <87fw5pktos.fsf@dex.adm.naquadah.org> <87ehl96ifc.fsf@dex.adm.naquadah.org> <87ehl86h4l.fsf@dex.adm.naquadah.org> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 4520126515D for ; Mon, 8 Oct 2012 21:28:21 +0200 (CEST) In-Reply-To: <87ehl86h4l.fsf@dex.adm.naquadah.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Julien Danjou Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Mon, 08 Oct 2012 18:52:26 +0200, Julien Danjou wrote: > > On Mon, Oct 08 2012, Takashi Iwai wrote: > > > Yep, as David pointed out, the beep control overrides the amp setup. > > And your previous result suggested that we shouldn't use this beep > > path either (except for unmuting it), otherwise you get a noise > > again. > > > > So, the patch below is the revised version. It removes the beep > > control but still opens the path to NID 0x1d. > > It does remove the beep control, and I think it therefore break the beep > functionnality: I've no sound when echoing '\a'. But that's likely to be > expected anyhow. :-/ Doesn't the beep work if you load pcspkr module? It should be there independently. > But yeah, definitely, I've no noise anymore in this case with this > patch. > > Now, I can still make the noise come back when "speaker" or "master" is > muted. This is definitely not a side effect of your patch, I just didn't > raise it before. Hm, then maybe the effect of removing noise appears no matter which input of NID 0x0b be unmuted? > This diff is between "no noise" (= just loaded the module with your > patch) and "noise with master muted": > > diff -u /tmp/no-noise.txt /tmp/noise-master-mute.txt > --- /tmp/no-noise.txt 2012-10-08 18:36:44.601047347 +0200 > +++ /tmp/noise-master-mute.txt 2012-10-08 18:37:02.221050163 +0200 > @@ -3,7 +3,7 @@ > !!ALSA Information Script v 0.4.61 > !!################################ > > -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 > +!!Script ran on: Mon Oct 8 16:37:02 UTC 2012 > > > !!Linux Distribution > @@ -260,7 +260,7 @@ > ControlAmp: chs=3, dir=Out, idx=0, ofs=0 > Control: name="Speaker Phantom Jack", index=0, device=0 > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > - Amp-Out vals: [0x00 0x00] > + Amp-Out vals: [0x80 0x80] > Pincap 0x00010050: OUT EAPD Balanced > EAPD 0x2: EAPD > Pin Default 0x90170110: [Fixed] Speaker at Int N/A > > > > > This diff is between "no noise" (= just loaded the module with your > patch) and "noise with speaker muted": > > diff -u /tmp/no-noise.txt /tmp/noise-speaker-mute.txt > --- /tmp/no-noise.txt 2012-10-08 18:36:44.601047347 +0200 > +++ /tmp/noise-speaker-mute.txt 2012-10-08 18:37:10.913051519 +0200 > @@ -3,7 +3,7 @@ > !!ALSA Information Script v 0.4.61 > !!################################ > > -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 > +!!Script ran on: Mon Oct 8 16:37:10 UTC 2012 > > > !!Linux Distribution > @@ -260,7 +260,7 @@ > ControlAmp: chs=3, dir=Out, idx=0, ofs=0 > Control: name="Speaker Phantom Jack", index=0, device=0 > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > - Amp-Out vals: [0x00 0x00] > + Amp-Out vals: [0x80 0x80] > Pincap 0x00010050: OUT EAPD Balanced > EAPD 0x2: EAPD > Pin Default 0x90170110: [Fixed] Speaker at Int N/A So, obviously muting the amp triggers the noise. BTW, does the noise come only from speaker, not from headphone, correct? Related tests: what happens if you mute both input amps of the node 0x0d? This is a mixer widget between DAC and the speaker pin. Does this widget work as a proper mute/unmute point without causing noise? > Now, I've discovered one more thing, don't know if you know. This is how > I managed to REALLY mute the speakers, the noise, everything (even > playing a sound file with everything unmuted makes no sound): > > % diff -u /tmp/sound.txt /tmp/no-sound-at-all.txt > --- /tmp/sound.txt 2012-10-08 18:48:02.605161041 +0200 > +++ /tmp/no-sound-at-all.txt 2012-10-08 18:47:50.453158964 +0200 > @@ -3,7 +3,7 @@ > !!ALSA Information Script v 0.4.61 > !!################################ > > -!!Script ran on: Mon Oct 8 16:48:02 UTC 2012 > +!!Script ran on: Mon Oct 8 16:47:50 UTC 2012 > > > !!Linux Distribution > @@ -267,7 +267,7 @@ > Conn = Analog, Color = Unknown > DefAssociation = 0x1, Sequence = 0x0 > Misc = NO_PRESENCE > - Pin-ctls: 0x40: OUT > + Pin-ctls: 0x00: > Power states: D0 D1 D2 D3 EPSS > Power: setting=D0, actual=D0 > Connection: 2 This essentially disables the output of the speaker pin. > When doing that, I cannot hear anything, because it seems to disconnect > the speakers. My idea would be to set this pin to 0x00 instead of 0x40 > when "Speakers" are set to mute (I don't know about master though). > WDYT? Possible, but a bit hackish. Let's see... Takashi