From: Takashi Iwai Subject: Re: stac9200 speaker/hp not detected Date: Wed, 04 Jul 2007 11:27:56 +0200 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (ns.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id 0041710380C for ; Wed, 4 Jul 2007 11:27:56 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Brian Hinz Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Wed, 04 Jul 2007 05:25:39 -0400, Brian Hinz wrote: > > Hi Takashi, > > Sorry, I recompiled the driver from the hg sources and hadn't re-run > alsamixer to unmute. It still doesn't work though - any suggestions? Attach the latest information, then. Takashi > > Thanks, > -brian > > > >From: Takashi Iwai > >To: "Brian Hinz" > >CC: alsa-devel@alsa-project.org > >Subject: Re: [alsa-devel] stac9200 speaker/hp not detected > >Date: Wed, 04 Jul 2007 10:43:12 +0200 > > > >At Tue, 03 Jul 2007 23:08:42 -0400, > >Brian Hinz wrote: > > > > > > This laptop has only an internal speaker, a headphone out, and a mic in > > > (unless there are other outs enabled when the dock is connected). The > > > windows INI seems to be setting some gpio bits but I don't understand > >how to > > > map the ini syntax into the alsa driver (or if it needs to be...) > > > >Might be needed, but... > > > > > Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out > > > Amp-Out caps: N/A > > > Amp-Out vals: [0x80 0x80] > > > Connection: 1 > > > 0x07 > > > >You didn't unmute "Master" mixer switch? > > > > > >Takashi > >