From: Takashi Iwai Subject: Re: Grey noise with HDA Intel PCH Date: Thu, 14 Aug 2014 17:11:32 +0200 Message-ID: References: <20140814114003.7b0019f3@saldaea> <53EC8D5B.5020709@ladisch.de> <20140814124616.65991d7e@saldaea> <20140814160737.0e8fc283@saldaea> <20140814163914.08e9a851@saldaea> <20140814170459.31428e0b@saldaea> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id E996E265353 for ; Thu, 14 Aug 2014 17:12:17 +0200 (CEST) In-Reply-To: <20140814170459.31428e0b@saldaea> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Julian Wollrath Cc: alsa-devel@alsa-project.org, Clemens Ladisch List-Id: alsa-devel@alsa-project.org At Thu, 14 Aug 2014 17:04:59 +0200, Julian Wollrath wrote: > > Am Thu, 14 Aug 2014 16:47:46 +0200 > schrieb Takashi Iwai : > > > At Thu, 14 Aug 2014 16:39:14 +0200, > > Julian Wollrath wrote: > > > > > > Am Thu, 14 Aug 2014 16:09:51 +0200 > > > schrieb Takashi Iwai : > > > > > > > At Thu, 14 Aug 2014 16:07:37 +0200, > > > > Julian Wollrath wrote: > > > > > > > > > > > > > > Simple mixer control 'Mic',0 > > > > > > > > > Front Left: Playback 0 [0%] [-34.50dB] [on] > > > > > > > > > Front Right: Playback 0 [0%] [-34.50dB] [on] > > > > > > > > > > > > > > > > This plays any noise from the mic input. > > > > > > > Turning it off makes no difference since capture is turned > > > > > > > off anyway: > > > > > > > > > > > > This is a loopback mixer element, it has nothing to do with > > > > > > capture stream. > > > > > > > > > > > > The likely culprit of the static noises is the signal from the > > > > > > analog loopback. In some cases, you can disable the whole > > > > > > loopback via "Loopback Mixing" mixer element on the fly. In > > > > > > some cases, you'd need to disable each mixer input (e.g. "Mic > > > > > > Playback Switch"). In some cases (e.g. on some Sony and Dell > > > > > > laptops), you'd need to disable the complete analog loopback > > > > > > at the initialization. > > > > > > > > > > > > The last one can be done via the early patching or sysfs > > > > > > reconfiguration, pass "mixer_nid = 0" hint. See HD-Audio.txt > > > > > > for a brief instruction. > > > > > Sadly, that did not help. > > > > > > > > Give alsa-info.sh output after your change to verify whether you > > > > did correctly. > > > Here it is, cheers: > > > > Thanks. The setup looks OK, the path is: > > DAC (0x02) -> mixer (0x0c) -> mixer (0x14) > > and the mixer mutes the loopback path (index 1). > > > > Is it the state where you still hear the static noise? > Yes, the alsa-info.sh script was executed, while hearing the static > noise. OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right? > > Also, what if you use the module option for snd-hda-intel > > model=nofixup or model=generic? > That did not change anything either. Passing the "mixer_nid = 0" hint > also did not get rid of the static noise, when loading snd-hda-intel > with model=nofixup resp. model=generic. Did you reboot with setting the option in /etc/modprobe.d/*? Reloading the module might not work for such a problem. In either way, there should be some difference in alsa-info.sh output, e.g. more (or less) mixer items with the model option. Takashi