From: Takashi Iwai Subject: Re: [PATCH] Fix single speed ADAT capture and playback with RME HDSPe AIO Date: Fri, 24 May 2019 08:01:47 +0200 Message-ID: References: <20190523215649.GA17263@bladje> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (mx2.suse.de [195.135.220.15]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 91628F80C0F for ; Fri, 24 May 2019 08:01:48 +0200 (CEST) In-Reply-To: <20190523215649.GA17263@bladje> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" To: Philippe Bekaert Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Thu, 23 May 2019 23:56:49 +0200, Philippe Bekaert wrote: > > By taking into account the mapping from logical to DMA channels when > enabling or disabling audio channels, ADAT channels 3 to 8 on the RME > HDSPe AIO card are now correctly captured and played back in single speed > mode. > > Since the mapping is an identity mapping for all cards except AIO and > RayDAT, only those cards should be affected by this patch. It was tested on > an AIO card. The patch needs testing on other cards, in particular RayDAT. > > Note: this patch does not solve ADAT capture and playback issues in double > or triple speed mode. That seems to be another problem. > > Signed-off-by: Philippe Bekaert Applied now, thanks. Takashi