From: Takashi Iwai Subject: Re: [PATCH 02/10] ALSA: hda - Add channel-mode support to Realtek auto-parser Date: Mon, 02 May 2011 09:16:19 +0200 Message-ID: References: <1304097516-7258-1-git-send-email-tiwai@suse.de> <1304097516-7258-3-git-send-email-tiwai@suse.de> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id A6F121037FC for ; Mon, 2 May 2011 09:16:23 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Raymond Yau Cc: ALSA Development Mailing List List-Id: alsa-devel@alsa-project.org At Mon, 2 May 2011 14:57:51 +0800, Raymond Yau wrote: > > 2011/5/2 Takashi Iwai > > > At Mon, 2 May 2011 10:06:15 +0800, > > Raymond Yau wrote: > > > > > > 2011/4/30 Takashi Iwai > > > > > > > This patch adds the support of "Channel Mode" enum control to Realtek > > > > auto-parser. When line-in or mic-in jacks are capable to output and > > > > free DACs are available, the driver allows to switch to multi-channel > > > > mode via "Channel Mode" enum switch, as already implemented in some > > > > preset cases. > > > > > > > > Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, > > > > 662 and the compatible codecs are supported. > > > > > > > > Signed-off-by: Takashi Iwai > > > > --- > > > > > > > > > > Why the line out become "speaker" for G41M-ES2L with 3 audio jacks at > > rear > > > panel ? > > > The driver won't create "Channel Mode" control and it cannot support > > > surround51 > > > > It's just because of pin fixup that I'm going to revert. > > > > Even revert the pin config, and distable auto mute, > the channel mode still allow 2, 4 or 6 channels > > IT seem that there is no way to use "HP" as "Side" to support surround 7.1 > as mentioned in the user manual (Chapter 5 Appendix) It's simply not supported for now. As already mentioned, all multi-io jacks have to be in the same location. And, it must be line-in or mic-in jacks. The implementation of hp-i/o switching wouldn't be too difficult, but a bigger missing piece is how to detect such a configuration reliably. Takashi