From: "Martin K. Petersen" Subject: [PATCH] libata: Signal that our SATL supports WRITE SAME(16) with UNMAP Date: Fri, 10 Sep 2010 01:23:18 -0400 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Sender: linux-ide-owner@vger.kernel.org To: Jeff Garzik , linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org List-Id: linux-scsi@vger.kernel.org Until now identifying that a device supports WRITE SAME(16) with the UNMAP bit set has been black magic. Implement support for the SBC-3 Thin Provisioning VPD page and set the TPWS bit. Signed-off-by: Martin K. Petersen --- diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a54273d..eea9935 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2001,6 +2001,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 0x89, /* page 0x89, ata info page */ 0xb0, /* page 0xb0, block limits page */ 0xb1, /* page 0xb1, block device characteristics page */ + 0xb2, /* page 0xb2, thin provisioning page */ }; rbuf[3] = sizeof(pages); /* number of supported VPD pages */ @@ -2172,6 +2173,16 @@ static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) +{ + /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ + rbuf[1] = 0xb2; + rbuf[3] = 0x4; + rbuf[5] = 1 << 6; /* TPWS */ + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -3250,6 +3261,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0xb1: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); break; + case 0xb2: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); + break; default: ata_scsi_invalid_field(cmd, done); break;