New: [BISECTED] High power usage since 'PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation'
Dear Bjorn,
yes, your patch is also logging always the same LTR_L1.2_THRESHOLD of 81920 ns, "skipping L1.2 config". The idle power draw with this patch is 0.905 +- 0.174 W, PC10 residency is 79 +- 6%, and SYS%LPI residency is 71 +- 6 %. Also the s2idle power draw is now about 0.7 W - the lowest of all Linux kernels I've used on this laptop.
Best wishes,
Sergey.
Quoted 182 lines · Bjorn Helgaas
Quoted 22 lines · Sergey Dolgov
Dear Bjorn,
I've compiled pciutils-3.13.0 with MinGW and run it with WinDBG, and it managed to display how Windows sets LTR1.2_Threshold. The trick is that it does NOT! I've removed all the actual reprogramming in
aspm_calc_l12_infoto see the devices' default thresholds, and they've come out exactly the same as in Windows (81920ns for all devices except 0 for NVIDIA, but it should have its own dynamic power management). I've collected these logs also after booting the original 6.14.0 kernel to make sure the devices haven't just kept the values set by Windows - nope, the devices (or maybe BIOS/Firmware) do reset LTR_L1.2_THRESHOLD to 81920ns every reboot.I tried to read latencies from
PCI_EXT_CAP_ID_LTR(see the new functionpcie_log_runtime_ltrin l12debug.patch), but it bails out at "No LTR capability found" for all devices.The idle power usage has increased slightly to 0.916 W due to about 80% PC10 residency and 60-70% SYS%LPI residency (in contrast to 90%+ PC10 and 80%+ SYS%LPI with pre
7afeb84d14eathresholds), but that's still much more power efficient than the mainline kernel.Quoted 4 lines
So the question is why the OS has to reprogram
T_POWER_ON, CMRT and LTR_L1.2_THRESHOLD at all, instead of trusting the device defaults? Is there any statistics on broken devices reporting bogus values, and frequently running out of buffer?Great question. I think you're right that if the BIOS has programmed L1.2 settings, it's very unlikely that the OS can do a better job.
This is really ugly, but since I won't have more time for this until Monday, could you try the patch below? (Replace the previous debug patch with this one)
drivers/pci/pcie/aspm.c +76
-0@@ -563,6 +563,27 @@ static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) } } +static u64 decode_l12_threshold (u32 scale,u32 value) +{ +u32 mpy; + +/* +* LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max +* value of 0x3ff. +*/ +switch (scale) { +case 0 : mpy =1 ;break ; +case 1 : mpy =32 ;break ; +case 2 : mpy =1024 ;break ; +case 3 : mpy =32768 ;break ; +case 4 : mpy =1048576 ;break ; +case 5 : mpy =33554432 ;break ; +default : mpy =0 ; + } + +return (u64 ) value * mpy; +} +static void pcie_aspm_check_latency (struct pci_dev *endpoint) {u32 latency, encoding, lnkcap_up, lnkcap_dw;@@ -641,18 +662,29 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,u32 ctl1 =0 , ctl2 =0 ;u32 pctl1, pctl2, cctl1, cctl2;u32 pl1_2_enables, cl1_2_enables; +u32 cmrt; +u32 p_ltr_val, p_ltr_scale; +u32 c_ltr_val, c_ltr_scale; +u64 p_ltr_threshold, c_ltr_threshold;/* Choose the greater of the two Port Common_Mode_Restore_Times */ val1 =FIELD_GET (PCI_L1SS_CAP_CM_RESTORE_TIME , parent_l1ss_cap); val2 =FIELD_GET (PCI_L1SS_CAP_CM_RESTORE_TIME , child_l1ss_cap); t_common_mode =max (val1, val2); +pci_info (child,"cap: parent CMRT %#04x child CMRT %#04x\n" , val1, val2); +/* Choose the greater of the two Port T_POWER_ON times */ val1 =FIELD_GET (PCI_L1SS_CAP_P_PWR_ON_VALUE , parent_l1ss_cap); scale1 =FIELD_GET (PCI_L1SS_CAP_P_PWR_ON_SCALE , parent_l1ss_cap); val2 =FIELD_GET (PCI_L1SS_CAP_P_PWR_ON_VALUE , child_l1ss_cap); scale2 =FIELD_GET (PCI_L1SS_CAP_P_PWR_ON_SCALE , child_l1ss_cap); +pci_info (child,"cap: parent T_POWER_ON %#06x usec (val %#04x scale %x)\n" , +calc_l12_pwron (parent, scale1, val1), val1, scale1); +pci_info (child,"cap: child T_POWER_ON %#06x usec (val %#04x scale %x)\n" , +calc_l12_pwron (child, scale2, val2), val2, scale2); +if (calc_l12_pwron (parent, scale1, val1) >calc_l12_pwron (child, scale2, val2)) { ctl2 |= FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_SCALE, scale1) |@@ -675,7 +707,11 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,* least 4us. */ l1_2_threshold =2 +4 + t_common_mode + t_power_on; +pci_info (child,"t_common_mode %#04x t_power_on %#04x l1_2_threshold %#06x\n" , + t_common_mode, t_power_on, l1_2_threshold);encode_l12_threshold (l1_2_threshold, &scale, &value); +pci_info (child,"encoded LTR_L1.2_THRESHOLD value %#06x scale %x\n" , + value, scale); ctl1 |=FIELD_PREP (PCI_L1SS_CTL1_CM_RESTORE_TIME , t_common_mode) |FIELD_PREP (PCI_L1SS_CTL1_LTR_L12_TH_VALUE , value) |FIELD_PREP (PCI_L1SS_CTL1_LTR_L12_TH_SCALE , scale);@@ -686,6 +722,28 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL1 , &cctl1);pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL2 , &cctl2); +pci_info (child,"L1SS_CTL1 %#08x (parent %#010x child %#010x)\n" , + ctl1, pctl1, cctl1); +pci_info (child,"L1SS_CTL2 %#08x (parent %#010x child %#010x)\n" , + ctl2, pctl2, cctl2); + + cmrt =FIELD_GET (PCI_L1SS_CTL1_CM_RESTORE_TIME , pctl1); + p_ltr_val =FIELD_GET (PCI_L1SS_CTL1_LTR_L12_TH_VALUE , pctl1); + p_ltr_scale =FIELD_GET (PCI_L1SS_CTL1_LTR_L12_TH_SCALE , pctl1); + p_ltr_threshold =decode_l12_threshold (p_ltr_scale, p_ltr_val); + c_ltr_val =FIELD_GET (PCI_L1SS_CTL1_LTR_L12_TH_VALUE , cctl1); + c_ltr_scale =FIELD_GET (PCI_L1SS_CTL1_LTR_L12_TH_SCALE , cctl1); + c_ltr_threshold =decode_l12_threshold (c_ltr_scale, c_ltr_val); +if (cmrt || p_ltr_threshold || c_ltr_threshold) { +pci_info (child,"cur: parent CMRT %d usec\n" , cmrt); +pci_info (child,"cur: parent LTR_L1.2_THRESHOLD value %#06x scale %x decoded %#012llx ns\n" , + p_ltr_val, p_ltr_scale, p_ltr_threshold); +pci_info (child,"cur: child LTR_L1.2_THRESHOLD value %#06x scale %x decoded %#012llx ns\n" , + c_ltr_val, c_ltr_scale, c_ltr_threshold); +pci_info (child,"skipping L1.2 config\n" ); +return ; + } +if (ctl1 == pctl1 && ctl1 == cctl1 && ctl2 == pctl2 && ctl2 == cctl2)return ;@@ -703,14 +761,27 @@ static void aspm_calc_l12_info(struct pcie_link_state *link, PCI_L1SS_CTL1_L1_2_MASK, 0); } +pci_read_config_dword (parent, parent->l1ss +PCI_L1SS_CTL1 , &pctl1); +pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL1 , &cctl1); +pci_info (child,"L1SS_CTL1 parent %#08x child %#08x (L1.2 disabled)\n" , + pctl1, cctl1); +/* Program T_POWER_ON times in both ports */ pci_write_config_dword (parent, parent->l1ss +PCI_L1SS_CTL2 , ctl2);pci_write_config_dword (child, child->l1ss +PCI_L1SS_CTL2 , ctl2); +pci_read_config_dword (parent, parent->l1ss +PCI_L1SS_CTL2 , &pctl2); +pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL2 , &cctl2); +pci_info (child,"L1SS_CTL2 parent %#08x child %#08x (T_POWER_ON updated)\n" , + pctl2, cctl2); +/* Program Common_Mode_Restore_Time in upstream device */ pci_clear_and_set_config_dword (parent, parent->l1ss +PCI_L1SS_CTL1 ,PCI_L1SS_CTL1_CM_RESTORE_TIME , ctl1); +pci_read_config_dword (parent, parent->l1ss +PCI_L1SS_CTL1 , &pctl1); +pci_info (child,"L1SS_CTL1 parent %#08x (CMRT updated)\n" , pctl1); +/* Program LTR_L1.2_THRESHOLD time in both ports */ pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, PCI_L1SS_CTL1_LTR_L12_TH_VALUE |@@ -721,6 +792,11 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,PCI_L1SS_CTL1_LTR_L12_TH_SCALE , ctl1); +pci_read_config_dword (parent, parent->l1ss +PCI_L1SS_CTL1 , &pctl1); +pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL1 , &cctl1); +pci_info (child,"L1SS_CTL1 parent %#08x child %#08x (LTR_L1.2_THRESHOLD updated)\n" , + pctl1, cctl1); +if (pl1_2_enables || cl1_2_enables) { pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0,@@ -729,6 +805,11 @@ static void aspm_calc_l12_info(struct pcie_link_state *link, child->l1ss + PCI_L1SS_CTL1, 0,
drivers/pci/pcie/aspm.c static void aspm_calc_l12_info(struct pcie_link_state *link, · line 815
Quoted 10 lines
drivers/pci/pcie/aspm.c +5
-0cl1_2_enables); } + +pci_read_config_dword (parent, parent->l1ss +PCI_L1SS_CTL1 , &pctl1); +pci_read_config_dword (child, child->l1ss +PCI_L1SS_CTL1 , &cctl1); +pci_info (child,"L1SS_CTL1 parent %#08x child %#08x (L1.2 restored)\n" , + pctl1, cctl1); }static void aspm_l1ss_init (struct pcie_link_state *link)
[ 0.000000] Linux version 6.14.0-00001-g13b71297a835 (dc@dc-hp) (gcc (Gentoo 14.2.1_p20241221 p7) 14.2.1 20241221, GNU ld (Gentoo 2.44 p1) 2.44.0) #45 SMP PREEMPT Sun Apr 20 09:40:19 BST 2025 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.14.0-00001-g13b71297a835 root=PARTUUID=1c79c386-6d27-4363-87fa-132b8751cf76 ro nowatchdog mitigations=off pcie_aspm=force pcie_aspm.policy=powersupersave resume=PARTUUID=0ce7b13e-c732-45f8-a889-75399119adb9 resume_offset=1017856 zram.num_devices=2 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000535e3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000535e4000-0x0000000054e59fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000054e5a000-0x0000000054ee1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000054ee2000-0x0000000055079fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005507a000-0x000000005ab35fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005ab36000-0x000000005ac0efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000005ac0f000-0x000000005ac0ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005ac10000-0x000000005fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000049bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] efi: EFI v2.7 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x54e7d000 ACPI=0x54e7d000 SMBIOS=0x5a98a000 SMBIOS 3.0=0x5a989000 MEMATTR=0x52082818 ESRT=0x50228b98 [ 0.000000] efi: Remove mem49: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem50: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem51: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem52: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map [ 0.000000] efi: Not removing mem53: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem54: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: HP HP Spectre x360 Convertible 15-df1xxx/863E, BIOS F.32 12/08/2023 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Detected 2600.000 MHz processor [ 0.000000] tsc: Detected 2599.992 MHz TSC [ 0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000006] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000011] last_pfn = 0x49c000 max_arch_pfn = 0x400000000 [ 0.000014] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs [ 0.000015] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000247] last_pfn = 0x5ac10 max_arch_pfn = 0x400000000 [ 0.000252] esrt: Reserving ESRT space from 0x0000000050228b98 to 0x0000000050228bd0. [ 0.000255] e820: update [mem 0x50228000-0x50228fff] usable ==> reserved [ 0.000264] Kernel/User page tables isolation: disabled on command line. [ 0.000265] Using GB pages for direct mapping [ 0.000391] Secure boot could not be determined [ 0.000392] ACPI: Early table checksum verification disabled [ 0.000393] ACPI: RSDP 0x0000000054E7D000 000024 (v02 HPQOEM) [ 0.000396] ACPI: XSDT 0x0000000054E7D0D0 00011C (v01 HPQOEM SLIC-MPC 01072009 HP 00010013) [ 0.000399] ACPI: FACP 0x0000000054EC82A8 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013) [ 0.000402] ACPI: DSDT 0x0000000054E7D278 04B02A (v02 HPQOEM 863E 01072009 ACPI 20160527) [ 0.000405] ACPI: FACS 0x0000000055077080 000040 [ 0.000406] ACPI: APIC 0x0000000054EC83C0 0000F4 (v04 HPQOEM 863E 01072009 HP 00010013) [ 0.000408] ACPI: FPDT 0x0000000054EC84B8 000044 (v01 HPQOEM 863E 01072009 HP 00010013) [ 0.000409] ACPI: FIDT 0x0000000054EC8500 00009C (v01 HPQOEM 863E 01072009 HP 00010013) [ 0.000411] ACPI: MCFG 0x0000000054EC85A0 00003C (v01 HPQOEM 863E 01072009 HP 00000097) [ 0.000412] ACPI: SSDT 0x0000000054EC85E0 00557E (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000414] ACPI: SSDT 0x0000000054ECDB60 001B5F (v02 HPQOEM 863E 00003000 ACPI 20160527) [ 0.000416] ACPI: MSDM 0x0000000054ECF6C0 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013) [ 0.000417] ACPI: SSDT 0x0000000054ECF718 0031C6 (v02 HPQOEM 863E 00003000 ACPI 20160527) [ 0.000419] ACPI: SSDT 0x0000000054ED28E0 002631 (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000420] ACPI: HPET 0x0000000054ED4F18 000038 (v01 HPQOEM 863E 00000002 HP 01000013) [ 0.000422] ACPI: SSDT 0x0000000054ED4F50 002CFD (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000423] ACPI: SSDT 0x0000000054ED7C50 002FD0 (v02 HPQOEM 863E 00000000 ACPI 20160527) [ 0.000425] ACPI: UEFI 0x0000000054EDAC20 000042 (v01 HPQOEM 863E 00000002 HP 01000013) [ 0.000426] ACPI: LPIT 0x0000000054EDAC68 000094 (v01 HPQOEM 863E 00000002 HP 01000013) [ 0.000428] ACPI: SSDT 0x0000000054EDAD00 001423 (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000430] ACPI: SSDT 0x0000000054EDC128 0005D2 (v02 HPQOEM 863E 00000000 ACPI 20160527) [ 0.000431] ACPI: DBGP 0x0000000054EDC700 000034 (v01 HPQOEM 863E 00000002 HP 01000013) [ 0.000433] ACPI: DBG2 0x0000000054EDC738 000054 (v00 HPQOEM 863E 00000002 HP 01000013) [ 0.000434] ACPI: SSDT 0x0000000054EDC790 000DBC (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000436] ACPI: SSDT 0x0000000054EDD550 000144 (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000437] ACPI: SSDT 0x0000000054EDD698 0000AE (v02 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000439] ACPI: NHLT 0x0000000054EDD748 00179E (v00 HPQOEM 863E 00000002 HP 01000013) [ 0.000440] ACPI: SSDT 0x0000000054EDEEE8 00009D (v01 HPQOEM 863E 00000001 ACPI 20160527) [ 0.000442] ACPI: SSDT 0x0000000054EDEF88 000060 (v01 HPQOEM 863E 00000001 ACPI 20160527) [ 0.000444] ACPI: UEFI 0x0000000054EDEFE8 00063A (v01 HPQOEM 863E 00000000 HP 00000000) [ 0.000446] ACPI: UEFI 0x0000000054EDF628 00005C (v01 HPQOEM 863E 00000000 HP 00000000) [ 0.000447] ACPI: SSDT 0x0000000054EDF688 002382 (v01 HPQOEM 863E 00001000 ACPI 20160527) [ 0.000449] ACPI: DMAR 0x0000000054EE1A10 0000A8 (v01 HPQOEM 863E 00000002 HP 01000013) [ 0.000450] ACPI: WSMT 0x0000000054EE1AB8 000028 (v01 HPQOEM 863E 01072009 HP 00010013) [ 0.000452] ACPI: BGRT 0x0000000054EE1AE0 000038 (v01 HPQOEM 863E 01072009 HP 00010013) [ 0.000453] ACPI: Reserving FACP table memory at [mem 0x54ec82a8-0x54ec83bb] [ 0.000454] ACPI: Reserving DSDT table memory at [mem 0x54e7d278-0x54ec82a1] [ 0.000455] ACPI: Reserving FACS table memory at [mem 0x55077080-0x550770bf] [ 0.000455] ACPI: Reserving APIC table memory at [mem 0x54ec83c0-0x54ec84b3] [ 0.000455] ACPI: Reserving FPDT table memory at [mem 0x54ec84b8-0x54ec84fb] [ 0.000456] ACPI: Reserving FIDT table memory at [mem 0x54ec8500-0x54ec859b] [ 0.000456] ACPI: Reserving MCFG table memory at [mem 0x54ec85a0-0x54ec85db] [ 0.000457] ACPI: Reserving SSDT table memory at [mem 0x54ec85e0-0x54ecdb5d] [ 0.000457] ACPI: Reserving SSDT table memory at [mem 0x54ecdb60-0x54ecf6be] [ 0.000458] ACPI: Reserving MSDM table memory at [mem 0x54ecf6c0-0x54ecf714] [ 0.000458] ACPI: Reserving SSDT table memory at [mem 0x54ecf718-0x54ed28dd] [ 0.000459] ACPI: Reserving SSDT table memory at [mem 0x54ed28e0-0x54ed4f10] [ 0.000459] ACPI: Reserving HPET table memory at [mem 0x54ed4f18-0x54ed4f4f] [ 0.000459] ACPI: Reserving SSDT table memory at [mem 0x54ed4f50-0x54ed7c4c] [ 0.000460] ACPI: Reserving SSDT table memory at [mem 0x54ed7c50-0x54edac1f] [ 0.000460] ACPI: Reserving UEFI table memory at [mem 0x54edac20-0x54edac61] [ 0.000461] ACPI: Reserving LPIT table memory at [mem 0x54edac68-0x54edacfb] [ 0.000461] ACPI: Reserving SSDT table memory at [mem 0x54edad00-0x54edc122] [ 0.000462] ACPI: Reserving SSDT table memory at [mem 0x54edc128-0x54edc6f9] [ 0.000462] ACPI: Reserving DBGP table memory at [mem 0x54edc700-0x54edc733] [ 0.000463] ACPI: Reserving DBG2 table memory at [mem 0x54edc738-0x54edc78b] [ 0.000463] ACPI: Reserving SSDT table memory at [mem 0x54edc790-0x54edd54b] [ 0.000464] ACPI: Reserving SSDT table memory at [mem 0x54edd550-0x54edd693] [ 0.000464] ACPI: Reserving SSDT table memory at [mem 0x54edd698-0x54edd745] [ 0.000465] ACPI: Reserving NHLT table memory at [mem 0x54edd748-0x54edeee5] [ 0.000465] ACPI: Reserving SSDT table memory at [mem 0x54edeee8-0x54edef84] [ 0.000466] ACPI: Reserving SSDT table memory at [mem 0x54edef88-0x54edefe7] [ 0.000466] ACPI: Reserving UEFI table memory at [mem 0x54edefe8-0x54edf621] [ 0.000466] ACPI: Reserving UEFI table memory at [mem 0x54edf628-0x54edf683] [ 0.000467] ACPI: Reserving SSDT table memory at [mem 0x54edf688-0x54ee1a09] [ 0.000467] ACPI: Reserving DMAR table memory at [mem 0x54ee1a10-0x54ee1ab7] [ 0.000468] ACPI: Reserving WSMT table memory at [mem 0x54ee1ab8-0x54ee1adf] [ 0.000468] ACPI: Reserving BGRT table memory at [mem 0x54ee1ae0-0x54ee1b17] [ 0.000489] No NUMA configuration found [ 0.000489] Faking a node at [mem 0x0000000000000000-0x000000049bffffff] [ 0.000492] NODE_DATA(0) allocated [mem 0x49bffd180-0x49bfffcbf] [ 0.000509] Zone ranges: [ 0.000510] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000511] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000512] Normal [mem 0x0000000100000000-0x000000049bffffff] [ 0.000513] Movable zone start for each node [ 0.000513] Early memory node ranges [ 0.000513] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000514] node 0: [mem 0x0000000000100000-0x00000000535e3fff] [ 0.000515] node 0: [mem 0x000000005ac0f000-0x000000005ac0ffff] [ 0.000516] node 0: [mem 0x0000000100000000-0x000000049bffffff] [ 0.000517] Initmem setup node 0 [mem 0x0000000000001000-0x000000049bffffff] [ 0.000521] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000540] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.002420] On node 0, zone DMA32: 30251 pages in unavailable ranges [ 0.020898] On node 0, zone Normal: 21488 pages in unavailable ranges [ 0.021044] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.021078] Reserving Intel graphics memory at [mem 0x5c000000-0x5fffffff] [ 0.025738] ACPI: PM-Timer IO Port: 0x1808 [ 0.025743] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.025744] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.025745] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.025745] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.025745] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.025746] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.025746] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.025747] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.025747] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.025747] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.025748] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.025748] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.025814] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.025816] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.025817] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.025820] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.025821] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.025825] e820: update [mem 0x5016e000-0x50186fff] usable ==> reserved [ 0.025831] TSC deadline timer available [ 0.025835] CPU topo: Max. logical packages: 1 [ 0.025835] CPU topo: Max. logical dies: 1 [ 0.025835] CPU topo: Max. dies per package: 1 [ 0.025838] CPU topo: Max. threads per core: 2 [ 0.025839] CPU topo: Num. cores per package: 6 [ 0.025839] CPU topo: Num. threads per package: 12 [ 0.025840] CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs [ 0.025849] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.025850] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.025851] PM: hibernation: Registered nosave memory: [mem 0x5016e000-0x50186fff] [ 0.025853] PM: hibernation: Registered nosave memory: [mem 0x50228000-0x50228fff] [ 0.025853] PM: hibernation: Registered nosave memory: [mem 0x535e4000-0x54e59fff] [ 0.025854] PM: hibernation: Registered nosave memory: [mem 0x54e5a000-0x54ee1fff] [ 0.025854] PM: hibernation: Registered nosave memory: [mem 0x54ee2000-0x55079fff] [ 0.025855] PM: hibernation: Registered nosave memory: [mem 0x5507a000-0x5ab35fff] [ 0.025855] PM: hibernation: Registered nosave memory: [mem 0x5ab36000-0x5ac0efff] [ 0.025856] PM: hibernation: Registered nosave memory: [mem 0x5ac10000-0x5fffffff] [ 0.025856] PM: hibernation: Registered nosave memory: [mem 0x60000000-0xfdffffff] [ 0.025857] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.025857] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.025857] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.025858] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.025858] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.025859] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff] [ 0.025859] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.025859] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.025860] [mem 0x60000000-0xfdffffff] available for PCI devices [ 0.025862] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.030151] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.030543] percpu: Embedded 59 pages/cpu s200984 r8192 d32488 u262144 [ 0.030547] pcpu-alloc: s200984 r8192 d32488 u262144 alloc=1*2097152 [ 0.030549] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.030562] Kernel command line: BOOT_IMAGE=/vmlinuz-6.14.0-00001-g13b71297a835 root=PARTUUID=1c79c386-6d27-4363-87fa-132b8751cf76 ro nowatchdog mitigations=off pcie_aspm=force pcie_aspm.policy=powersupersave resume=PARTUUID=0ce7b13e-c732-45f8-a889-75399119adb9 resume_offset=1017856 zram.num_devices=2 [ 0.030593] PCIe ASPM is forcibly enabled [ 0.030607] Unknown kernel command line parameters "nowatchdog BOOT_IMAGE=/vmlinuz-6.14.0-00001-g13b71297a835", will be passed to user space. [ 0.030629] random: crng init done [ 0.030629] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.031765] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.032336] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.032422] Fallback order for Node 0: 0 [ 0.032424] Built 1 zonelists, mobility grouping on. Total pages: 4126083 [ 0.032425] Policy zone: Normal [ 0.032426] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.032429] software IO TLB: area num 16. [ 0.063617] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.063709] rcu: Preemptible hierarchical RCU implementation. [ 0.063710] Trampoline variant of Tasks RCU enabled. [ 0.063710] Tracing variant of Tasks RCU enabled. [ 0.063711] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.063717] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12. [ 0.063719] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12. [ 0.065069] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16 [ 0.065338] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.065686] Console: colour dummy device 80x25 [ 0.065689] printk: legacy console [tty0] enabled [ 0.065721] ACPI: Core revision 20240827 [ 0.065910] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.065970] APIC: Switch to symmetric I/O mode setup [ 0.065971] DMAR: Host address width 39 [ 0.065972] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.065976] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.065978] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.065980] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.065982] DMAR: RMRR base: 0x00000053dfc000 end: 0x00000053e1bfff [ 0.065983] DMAR: RMRR base: 0x0000005b800000 end: 0x0000005fffffff [ 0.065984] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.065985] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.069113] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.078386] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns [ 0.078390] Calibrating delay loop (skipped), value calculated using timer frequency.. 5202.65 BogoMIPS (lpj=8666640) [ 0.078409] CPU0: Thermal monitoring enabled (TM1) [ 0.078444] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.078445] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4 [ 0.078448] process: using mwait in idle threads [ 0.078450] Spectre V2 : User space: Vulnerable [ 0.078452] Speculative Store Bypass: Vulnerable [ 0.078454] SRBDS: Vulnerable [ 0.078458] GDS: Vulnerable [ 0.078462] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.078463] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.078463] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.078464] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.078464] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.078465] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.078466] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.078467] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.078468] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.081722] Freeing SMP alternatives memory: 40K [ 0.081722] pid_max: default: 32768 minimum: 301 [ 0.081722] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.081722] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.081722] smpboot: CPU0: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 0.081722] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.081722] ... version: 4 [ 0.081722] ... bit width: 48 [ 0.081722] ... generic registers: 4 [ 0.081722] ... value mask: 0000ffffffffffff [ 0.081722] ... max period: 00007fffffffffff [ 0.081722] ... fixed-purpose events: 3 [ 0.081722] ... event mask: 000000070000000f [ 0.081722] signal: max sigframe size: 2032 [ 0.081722] Estimated ratio of average max frequency by base frequency (times 1024): 1654 [ 0.081722] rcu: Hierarchical SRCU implementation. [ 0.081722] rcu: Max phase no-delay instances is 1000. [ 0.081722] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level [ 0.081722] smp: Bringing up secondary CPUs ... [ 0.081722] smpboot: x86: Booting SMP configuration: [ 0.081722] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.082531] smp: Brought up 1 node, 12 CPUs [ 0.082531] smpboot: Total of 12 processors activated (62424.80 BogoMIPS) [ 0.085097] Memory: 16098440K/16504332K available (16636K kernel code, 1993K rwdata, 5708K rodata, 2608K init, 2548K bss, 393656K reserved, 0K cma-reserved) [ 0.085384] devtmpfs: initialized [ 0.085384] ACPI: PM: Registering ACPI NVS region [mem 0x54ee2000-0x55079fff] (1671168 bytes) [ 0.085384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.085384] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.085384] pinctrl core: initialized pinctrl subsystem [ 0.085445] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.085539] audit: initializing netlink subsys (disabled) [ 0.085544] audit: type=2000 audit(1745139000.000:1): state=initialized audit_enabled=0 res=1 [ 0.085544] thermal_sys: Registered thermal governor 'fair_share' [ 0.085544] thermal_sys: Registered thermal governor 'bang_bang' [ 0.085544] thermal_sys: Registered thermal governor 'step_wise' [ 0.085544] thermal_sys: Registered thermal governor 'user_space' [ 0.085544] cpuidle: using governor menu [ 0.085544] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.085544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.085544] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.085544] PCI: Using configuration type 1 for base access [ 0.085544] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.085544] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.085544] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.085544] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085544] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.085544] ACPI: Added _OSI(Module Device) [ 0.085544] ACPI: Added _OSI(Processor Device) [ 0.085544] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.085544] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128389] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.XDCI], AE_NOT_FOUND (20240827/dswload2-162) [ 0.128389] fbcon: Taking over console [ 0.131723] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220) [ 0.131723] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.131734] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.I2C2.TPD0], AE_NOT_FOUND (20240827/dswload2-162) [ 0.131734] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.131734] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.I2C3.TPL1], AE_NOT_FOUND (20240827/dswload2-162) [ 0.131734] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.131734] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.131734] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.131734] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.135688] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.135693] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.135695] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.135697] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.135700] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.135703] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.137025] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.137029] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.137031] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.137033] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.137036] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.137038] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.138264] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.138268] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.138271] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.138272] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.138276] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.138278] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.139602] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.139606] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.139609] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.139610] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.139613] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.139616] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.140936] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.140940] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.140942] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.140943] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.140947] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.140949] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.142176] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.142180] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.142182] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.142184] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.142187] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.142189] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.143516] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.143520] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.143523] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.143524] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.143527] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.143530] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.144751] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.144756] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.144758] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.144759] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.144763] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.144765] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.145987] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.145992] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.145994] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.145995] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.145999] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.146001] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.147320] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.147324] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.147327] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.147328] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.147332] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.147334] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.148562] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS13._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.148566] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.148568] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.148570] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS13._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.148573] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.148575] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.149896] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.149900] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.149903] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.149904] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.149908] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.149910] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151240] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151244] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151246] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151248] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151251] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151253] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151256] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151259] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151261] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151263] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151266] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151268] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151296] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151299] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151302] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151303] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151306] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151309] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151335] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151339] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151342] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151343] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151346] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151348] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151375] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151379] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151381] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151382] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151386] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151388] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151415] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151418] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151421] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151422] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151425] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151428] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151454] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151458] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151460] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151462] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151465] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151467] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151494] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151498] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151500] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151501] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151505] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151507] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151533] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151537] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151539] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151541] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151544] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151546] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151573] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151577] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151579] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151580] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151584] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151586] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151613] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151616] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151619] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151620] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151623] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151626] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151652] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._UPC], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151656] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151658] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151660] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._PLD], AE_ALREADY_EXISTS (20240827/dswload2-326) [ 0.151663] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220) [ 0.151665] ACPI: Skipping parse of AML opcode: Method (0x0014) [ 0.151722] ACPI: 15 ACPI AML tables successfully acquired and loaded [ 0.214508] ACPI: Dynamic OEM Table Load: [ 0.214508] ACPI: SSDT 0xFFFF9BF00103F400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.215662] ACPI: Dynamic OEM Table Load: [ 0.215666] ACPI: SSDT 0xFFFF9BF001036000 000581 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.216475] ACPI: Dynamic OEM Table Load: [ 0.216478] ACPI: SSDT 0xFFFF9BF000FEB600 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.217229] ACPI: Dynamic OEM Table Load: [ 0.217232] ACPI: SSDT 0xFFFF9BF00163B000 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.217946] ACPI: Dynamic OEM Table Load: [ 0.217950] ACPI: SSDT 0xFFFF9BF001030800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.218840] ACPI: Dynamic OEM Table Load: [ 0.218844] ACPI: SSDT 0xFFFF9BF001035000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.219673] ACPI: Dynamic OEM Table Load: [ 0.219676] ACPI: SSDT 0xFFFF9BF00103E800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.220509] ACPI: Dynamic OEM Table Load: [ 0.220513] ACPI: SSDT 0xFFFF9BF001046000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.221734] ACPI: Dynamic OEM Table Load: [ 0.221738] ACPI: SSDT 0xFFFF9BF00103B400 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.226018] ACPI: EC: EC started [ 0.226019] ACPI: EC: interrupt blocked [ 0.242059] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.242061] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.242062] ACPI: Interpreter enabled [ 0.242095] ACPI: PM: (supports S0 S4 S5) [ 0.242096] ACPI: Using IOAPIC for interrupt routing [ 0.242124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.242125] PCI: Ignoring E820 reservations for host bridge windows [ 0.243050] ACPI: Enabled 12 GPEs in block 00 to 7F [ 0.247049] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 0.253454] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.253679] ACPI: \_SB_.PCI0.RP15.PXSX.DRST: New power resource [ 0.253919] ACPI: \_SB_.PCI0.RP17.PXP_: New power resource [ 0.260865] ACPI: \_SB_.PCI0.XHC_.RHUB.HS07.DBTP: New power resource [ 0.262990] ACPI: \_SB_.PCI0.PAUD: New power resource [ 0.264802] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource [ 0.265124] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource [ 0.265432] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource [ 0.268682] ACPI: \_SB_.PCI0.I2C2.PXTC: New power resource [ 0.269029] ACPI: \_SB_.PCI0.I2C3.PXTC: New power resource [ 0.271060] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource [ 0.276464] ACPI: \PIN_: New power resource [ 0.277054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.277059] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.278551] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.281514] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR] [ 0.281515] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.282528] PCI host bridge to bus 0000:00 [ 0.282531] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.282532] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.282533] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.282534] pci_bus 0000:00: root bus resource [mem 0x60000000-0xdfffffff window] [ 0.282535] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.282536] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.282537] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.282608] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000 conventional PCI endpoint [ 0.282663] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port [ 0.282671] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.282673] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.282675] pci 0000:00:01.0: bridge window [mem 0x8f000000-0x900fffff] [ 0.282679] pci 0000:00:01.0: bridge window [mem 0x6050000000-0x6061ffffff 64bit pref] [ 0.282699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.283035] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.283046] pci 0000:00:02.0: BAR 0 [mem 0x6062000000-0x6062ffffff 64bit] [ 0.283048] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.283049] pci 0000:00:02.0: BAR 4 [io 0x4000-0x403f] [ 0.283059] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.283169] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint [ 0.283181] pci 0000:00:04.0: BAR 0 [mem 0x6063110000-0x6063117fff 64bit] [ 0.283496] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 conventional PCI endpoint [ 0.283572] pci 0000:00:12.0: BAR 0 [mem 0x6063125000-0x6063125fff 64bit] [ 0.283772] pci 0000:00:13.0: [8086:a37c] type 00 class 0x070000 conventional PCI endpoint [ 0.283844] pci 0000:00:13.0: BAR 0 [mem 0x606311e000-0x606311ffff 64bit] [ 0.283907] pci 0000:00:13.0: PME# supported from D0 D3hot [ 0.284238] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 conventional PCI endpoint [ 0.284314] pci 0000:00:14.0: BAR 0 [mem 0x6063100000-0x606310ffff 64bit] [ 0.284387] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.285610] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 conventional PCI endpoint [ 0.285681] pci 0000:00:14.2: BAR 0 [mem 0x606311c000-0x606311dfff 64bit] [ 0.285686] pci 0000:00:14.2: BAR 2 [mem 0x6063124000-0x6063124fff 64bit] [ 0.286198] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000 conventional PCI endpoint [ 0.287611] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] [ 0.289702] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000 conventional PCI endpoint [ 0.291114] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] [ 0.292877] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 conventional PCI endpoint [ 0.292949] pci 0000:00:16.0: BAR 0 [mem 0x6063121000-0x6063121fff 64bit] [ 0.293023] pci 0000:00:16.0: PME# supported from D3hot [ 0.293442] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 conventional PCI endpoint [ 0.293576] pci 0000:00:17.0: BAR 0 [mem 0x8e100000-0x8e101fff] [ 0.293580] pci 0000:00:17.0: BAR 1 [mem 0x8e103000-0x8e1030ff] [ 0.293583] pci 0000:00:17.0: BAR 2 [io 0x4090-0x4097] [ 0.293588] pci 0000:00:17.0: BAR 3 [io 0x4080-0x4083] [ 0.293591] pci 0000:00:17.0: BAR 4 [io 0x4060-0x407f] [ 0.293595] pci 0000:00:17.0: BAR 5 [mem 0x8e102000-0x8e1027ff] [ 0.293712] pci 0000:00:17.0: PME# supported from D3hot [ 0.294027] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 PCIe Root Port [ 0.294076] pci 0000:00:1b.0: PCI bridge to [bus 02-6c] [ 0.294087] pci 0000:00:1b.0: bridge window [mem 0x60000000-0x8e0fffff] [ 0.294105] pci 0000:00:1b.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.294231] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.294275] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity [ 0.294849] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 PCIe Root Port [ 0.294898] pci 0000:00:1d.0: PCI bridge to [bus 6d] [ 0.294908] pci 0000:00:1d.0: bridge window [mem 0x90500000-0x905fffff] [ 0.295048] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.295091] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.295563] pci 0000:00:1d.2: [8086:a332] type 01 class 0x060400 PCIe Root Port [ 0.295612] pci 0000:00:1d.2: PCI bridge to [bus 6e] [ 0.295623] pci 0000:00:1d.2: bridge window [mem 0x90400000-0x904fffff] [ 0.295760] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold [ 0.295803] pci 0000:00:1d.2: PTM enabled (root), 4ns granularity [ 0.296291] pci 0000:00:1d.6: [8086:a336] type 01 class 0x060400 PCIe Root Port [ 0.296340] pci 0000:00:1d.6: PCI bridge to [bus 6f] [ 0.296351] pci 0000:00:1d.6: bridge window [mem 0x90300000-0x903fffff] [ 0.296486] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold [ 0.296526] pci 0000:00:1d.6: PTM enabled (root), 4ns granularity [ 0.296982] pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400 PCIe Root Port [ 0.297031] pci 0000:00:1d.7: PCI bridge to [bus 70] [ 0.297042] pci 0000:00:1d.7: bridge window [mem 0x90200000-0x902fffff] [ 0.297175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.297216] pci 0000:00:1d.7: PTM enabled (root), 4ns granularity [ 0.297666] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100 conventional PCI endpoint [ 0.298072] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040100 conventional PCI endpoint [ 0.298215] pci 0000:00:1f.3: BAR 0 [mem 0x6063118000-0x606311bfff 64bit] [ 0.298232] pci 0000:00:1f.3: BAR 4 [mem 0x6063000000-0x60630fffff 64bit] [ 0.298363] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.300749] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 conventional PCI endpoint [ 0.301030] pci 0000:00:1f.4: BAR 0 [mem 0x6063120000-0x60631200ff 64bit] [ 0.301062] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] [ 0.301321] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 conventional PCI endpoint [ 0.301393] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] [ 0.301502] pci 0000:01:00.0: [10de:1f91] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.301556] pci 0000:01:00.0: BAR 0 [mem 0x8f000000-0x8fffffff] [ 0.301560] pci 0000:01:00.0: BAR 1 [mem 0x6050000000-0x605fffffff 64bit pref] [ 0.301564] pci 0000:01:00.0: BAR 3 [mem 0x6060000000-0x6061ffffff 64bit pref] [ 0.301567] pci 0000:01:00.0: BAR 5 [io 0x3000-0x307f] [ 0.301569] pci 0000:01:00.0: ROM [mem 0x90000000-0x9007ffff pref] [ 0.301645] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.301696] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.301913] pci 0000:01:00.1: [10de:10fa] type 00 class 0x040300 PCIe Endpoint [ 0.301968] pci 0000:01:00.1: BAR 0 [mem 0x90080000-0x90083fff] [ 0.302121] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.302471] pci 0000:02:00.0: [8086:15ea] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.302520] pci 0000:02:00.0: PCI bridge to [bus 03-6c] [ 0.302534] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff] [ 0.302552] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.302574] pci 0000:02:00.0: enabling Extended Tags [ 0.302759] pci 0000:02:00.0: supports D1 D2 [ 0.302760] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.302934] pci 0000:02:00.0: PTM enabled, 4ns granularity [ 0.303172] pci 0000:02:00.0: cap: parent CMRT 0x28 child CMRT 0x00 [ 0.303174] pci 0000:02:00.0: cap: parent T_POWER_ON 0x002c usec (val 0x16 scale 0) [ 0.303175] pci 0000:02:00.0: cap: child T_POWER_ON 0x000a usec (val 0x05 scale 0) [ 0.303176] pci 0000:02:00.0: t_common_mode 0x28 t_power_on 0x2c l1_2_threshold 0x005a [ 0.303177] pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value 0x0058 scale 2 [ 0.303184] pci 0000:02:00.0: L1SS_CTL1 0x40582800 (parent 0x4050280f child 0x4050000f) [ 0.303185] pci 0000:02:00.0: L1SS_CTL2 0x0000b0 (parent 0x000000b0 child 0x000000b0) [ 0.303186] pci 0000:02:00.0: cur: parent CMRT 40 usec [ 0.303187] pci 0000:02:00.0: cur: parent LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.303188] pci 0000:02:00.0: cur: child LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.303189] pci 0000:02:00.0: skipping L1.2 config [ 0.303199] pci 0000:00:1b.0: PCI bridge to [bus 02-6c] [ 0.303332] pci 0000:03:00.0: [8086:15ea] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.303381] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.303395] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff] [ 0.303436] pci 0000:03:00.0: enabling Extended Tags [ 0.303615] pci 0000:03:00.0: supports D1 D2 [ 0.303616] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303977] pci 0000:03:01.0: [8086:15ea] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.304026] pci 0000:03:01.0: PCI bridge to [bus 05-37] [ 0.304040] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff] [ 0.304058] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref] [ 0.304082] pci 0000:03:01.0: enabling Extended Tags [ 0.304268] pci 0000:03:01.0: supports D1 D2 [ 0.304268] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.304609] pci 0000:03:02.0: [8086:15ea] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.304658] pci 0000:03:02.0: PCI bridge to [bus 38] [ 0.304672] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff] [ 0.304713] pci 0000:03:02.0: enabling Extended Tags [ 0.304889] pci 0000:03:02.0: supports D1 D2 [ 0.304890] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305254] pci 0000:03:04.0: [8086:15ea] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.305303] pci 0000:03:04.0: PCI bridge to [bus 39-6c] [ 0.305317] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff] [ 0.305335] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref] [ 0.305358] pci 0000:03:04.0: enabling Extended Tags [ 0.305547] pci 0000:03:04.0: supports D1 D2 [ 0.305548] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305899] pci 0000:02:00.0: PCI bridge to [bus 03-6c] [ 0.306034] pci 0000:04:00.0: [8086:15eb] type 00 class 0x088000 PCIe Endpoint [ 0.306110] pci 0000:04:00.0: BAR 0 [mem 0x8e000000-0x8e03ffff] [ 0.306113] pci 0000:04:00.0: BAR 1 [mem 0x8e040000-0x8e040fff] [ 0.306135] pci 0000:04:00.0: enabling Extended Tags [ 0.306296] pci 0000:04:00.0: supports D1 D2 [ 0.306297] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.306613] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.306694] pci 0000:03:01.0: PCI bridge to [bus 05-37] [ 0.306835] pci 0000:38:00.0: [8086:15ec] type 00 class 0x0c0330 PCIe Endpoint [ 0.306915] pci 0000:38:00.0: BAR 0 [mem 0x77f00000-0x77f0ffff] [ 0.307120] pci 0000:38:00.0: supports D1 D2 [ 0.307121] pci 0000:38:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.307503] pci 0000:03:02.0: PCI bridge to [bus 38] [ 0.307584] pci 0000:03:04.0: PCI bridge to [bus 39-6c] [ 0.308430] pci 0000:6d:00.0: [8086:0975] type 00 class 0x010802 PCIe Endpoint [ 0.308506] pci 0000:6d:00.0: BAR 0 [mem 0x90500000-0x90503fff 64bit] [ 0.308968] pci 0000:6d:00.0: cap: parent CMRT 0x28 child CMRT 0x64 [ 0.308969] pci 0000:6d:00.0: cap: parent T_POWER_ON 0x002c usec (val 0x16 scale 0) [ 0.308971] pci 0000:6d:00.0: cap: child T_POWER_ON 0x0c1c usec (val 0x1f scale 2) [ 0.308972] pci 0000:6d:00.0: t_common_mode 0x64 t_power_on 0xc1c l1_2_threshold 0x0c86 [ 0.308973] pci 0000:6d:00.0: encoded LTR_L1.2_THRESHOLD value 0x0062 scale 3 [ 0.308980] pci 0000:6d:00.0: L1SS_CTL1 0x60626400 (parent 0x4050640f child 0x4050000f) [ 0.308981] pci 0000:6d:00.0: L1SS_CTL2 0x0000fa (parent 0x000000fa child 0x000000fa) [ 0.308982] pci 0000:6d:00.0: cur: parent CMRT 100 usec [ 0.308983] pci 0000:6d:00.0: cur: parent LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.308984] pci 0000:6d:00.0: cur: child LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.308985] pci 0000:6d:00.0: skipping L1.2 config [ 0.308998] pci 0000:00:1d.0: PCI bridge to [bus 6d] [ 0.309297] pci 0000:6e:00.0: [8086:0975] type 00 class 0x010802 PCIe Endpoint [ 0.309373] pci 0000:6e:00.0: BAR 0 [mem 0x90410000-0x90413fff 64bit] [ 0.309382] pci 0000:6e:00.0: BAR 4 [mem 0x90400000-0x9040ffff 64bit] [ 0.309396] pci 0000:6e:00.0: enabling Extended Tags [ 0.309836] pci 0000:6e:00.0: cap: parent CMRT 0x28 child CMRT 0x64 [ 0.309837] pci 0000:6e:00.0: cap: parent T_POWER_ON 0x002c usec (val 0x16 scale 0) [ 0.309838] pci 0000:6e:00.0: cap: child T_POWER_ON 0x0c1c usec (val 0x1f scale 2) [ 0.309839] pci 0000:6e:00.0: t_common_mode 0x64 t_power_on 0xc1c l1_2_threshold 0x0c86 [ 0.309839] pci 0000:6e:00.0: encoded LTR_L1.2_THRESHOLD value 0x0062 scale 3 [ 0.309846] pci 0000:6e:00.0: L1SS_CTL1 0x60626400 (parent 0x4050640f child 0x4050000f) [ 0.309847] pci 0000:6e:00.0: L1SS_CTL2 0x0000fa (parent 0x000000fa child 0x000000fa) [ 0.309848] pci 0000:6e:00.0: cur: parent CMRT 100 usec [ 0.309849] pci 0000:6e:00.0: cur: parent LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.309850] pci 0000:6e:00.0: cur: child LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.309850] pci 0000:6e:00.0: skipping L1.2 config [ 0.309863] pci 0000:00:1d.2: PCI bridge to [bus 6e] [ 0.310836] pci 0000:6f:00.0: [8086:2723] type 00 class 0x028000 PCIe Endpoint [ 0.311006] pci 0000:6f:00.0: BAR 0 [mem 0x90300000-0x90303fff 64bit] [ 0.312264] pci 0000:6f:00.0: PME# supported from D0 D3hot D3cold [ 0.314310] pci 0000:6f:00.0: cap: parent CMRT 0x28 child CMRT 0x1e [ 0.314311] pci 0000:6f:00.0: cap: parent T_POWER_ON 0x002c usec (val 0x16 scale 0) [ 0.314312] pci 0000:6f:00.0: cap: child T_POWER_ON 0x0012 usec (val 0x09 scale 0) [ 0.314313] pci 0000:6f:00.0: t_common_mode 0x28 t_power_on 0x2c l1_2_threshold 0x005a [ 0.314314] pci 0000:6f:00.0: encoded LTR_L1.2_THRESHOLD value 0x0058 scale 2 [ 0.314321] pci 0000:6f:00.0: L1SS_CTL1 0x40582800 (parent 0x4050280f child 0x4050000f) [ 0.314322] pci 0000:6f:00.0: L1SS_CTL2 0x0000b0 (parent 0x000000b0 child 0x000000b0) [ 0.314323] pci 0000:6f:00.0: cur: parent CMRT 40 usec [ 0.314324] pci 0000:6f:00.0: cur: parent LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.314325] pci 0000:6f:00.0: cur: child LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.314326] pci 0000:6f:00.0: skipping L1.2 config [ 0.314485] pci 0000:00:1d.6: PCI bridge to [bus 6f] [ 0.314668] pci 0000:70:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint [ 0.314740] pci 0000:70:00.0: BAR 1 [mem 0x90200000-0x90200fff] [ 0.314871] pci 0000:70:00.0: supports D1 D2 [ 0.314872] pci 0000:70:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.315098] pci 0000:70:00.0: cap: parent CMRT 0x28 child CMRT 0x3c [ 0.315099] pci 0000:70:00.0: cap: parent T_POWER_ON 0x002c usec (val 0x16 scale 0) [ 0.315100] pci 0000:70:00.0: cap: child T_POWER_ON 0x003c usec (val 0x06 scale 1) [ 0.315101] pci 0000:70:00.0: t_common_mode 0x3c t_power_on 0x3c l1_2_threshold 0x007e [ 0.315101] pci 0000:70:00.0: encoded LTR_L1.2_THRESHOLD value 0x007c scale 2 [ 0.315108] pci 0000:70:00.0: L1SS_CTL1 0x407c3c00 (parent 0x40503c0f child 0x4050000f) [ 0.315109] pci 0000:70:00.0: L1SS_CTL2 0x000031 (parent 0x00000031 child 0x00000031) [ 0.315110] pci 0000:70:00.0: cur: parent CMRT 60 usec [ 0.315110] pci 0000:70:00.0: cur: parent LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.315111] pci 0000:70:00.0: cur: child LTR_L1.2_THRESHOLD value 0x0050 scale 2 decoded 0x0000014000 ns [ 0.315112] pci 0000:70:00.0: skipping L1.2 config [ 0.315126] pci 0000:00:1d.7: PCI bridge to [bus 70] [ 0.317254] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.317316] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.317377] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.317437] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.317496] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.317556] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.317616] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.317675] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.324660] Low-power S0 idle used by default for system suspend [ 0.328854] ACPI: EC: interrupt unblocked [ 0.328856] ACPI: EC: event unblocked [ 0.328868] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.328868] ACPI: EC: GPE=0x17 [ 0.328869] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.328871] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.328902] iommu: Default domain type: Translated [ 0.328902] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.328952] SCSI subsystem initialized [ 0.328956] libata version 3.00 loaded. [ 0.328958] ACPI: bus type USB registered [ 0.328965] usbcore: registered new interface driver usbfs [ 0.328968] usbcore: registered new interface driver hub [ 0.328972] usbcore: registered new device driver usb [ 0.331801] efivars: Registered efivars operations [ 0.331801] PCI: Using ACPI for IRQ routing [ 0.384210] PCI: pci_cache_line_size set to 64 bytes [ 0.385059] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.385060] e820: reserve RAM buffer [mem 0x5016e000-0x53ffffff] [ 0.385061] e820: reserve RAM buffer [mem 0x50228000-0x53ffffff] [ 0.385062] e820: reserve RAM buffer [mem 0x535e4000-0x53ffffff] [ 0.385063] e820: reserve RAM buffer [mem 0x5ac10000-0x5bffffff] [ 0.385086] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.385086] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.385086] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.385086] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.385086] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.385086] vgaarb: loaded [ 0.385368] wmi_bus wmi_bus-PNP0C14:05: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances [ 0.385370] wmi_bus wmi_bus-PNP0C14:05: [Firmware Info]: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A has zero instances [ 0.385371] wmi_bus wmi_bus-PNP0C14:05: [Firmware Info]: 7391A661-223A-47DB-A77A-7BE84C60822D has zero instances [ 0.385371] wmi_bus wmi_bus-PNP0C14:05: [Firmware Info]: DF4E63B6-3BBC-4858-9737-C74F82F821F3 has zero instances [ 0.388389] clocksource: Switched to clocksource tsc-early [ 0.388494] pnp: PnP ACPI init [ 0.388548] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 0.388678] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.388680] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.388782] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.388923] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.388925] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.388926] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.388927] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.388928] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.388929] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.388930] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.388931] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.389106] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.389108] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.389110] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.389111] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.389112] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.389113] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.389114] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.389345] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.391983] pnp: PnP ACPI: found 9 devices [ 0.397328] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.397362] NET: Registered PF_INET protocol family [ 0.397455] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.399417] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.399435] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.399439] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.399529] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.399712] TCP: Hash tables configured (established 131072 bind 65536) [ 0.399726] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.399773] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.399835] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.399838] NET: Registered PF_XDP protocol family [ 0.399843] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-37] add_size 1000 [ 0.399845] pci 0000:03:04.0: bridge window [io 0x1000-0x0fff] to [bus 39-6c] add_size 1000 [ 0.399847] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-6c] add_size 2000 [ 0.399848] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02-6c] add_size 3000 [ 0.399854] pci 0000:00:15.0: BAR 0 [mem 0x4010000000-0x4010000fff 64bit]: assigned [ 0.400123] pci 0000:00:15.1: BAR 0 [mem 0x4010001000-0x4010001fff 64bit]: assigned [ 0.400356] pci 0000:00:1b.0: bridge window [io 0x5000-0x7fff]: assigned [ 0.400357] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.400359] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.400361] pci 0000:00:01.0: bridge window [mem 0x8f000000-0x900fffff] [ 0.400362] pci 0000:00:01.0: bridge window [mem 0x6050000000-0x6061ffffff 64bit pref] [ 0.400365] pci 0000:02:00.0: bridge window [io 0x5000-0x6fff]: assigned [ 0.400367] pci 0000:03:01.0: bridge window [io 0x5000-0x5fff]: assigned [ 0.400368] pci 0000:03:04.0: bridge window [io 0x6000-0x6fff]: assigned [ 0.400369] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.400380] pci 0000:03:00.0: bridge window [mem 0x8e000000-0x8e0fffff] [ 0.400393] pci 0000:03:01.0: PCI bridge to [bus 05-37] [ 0.400396] pci 0000:03:01.0: bridge window [io 0x5000-0x5fff] [ 0.400402] pci 0000:03:01.0: bridge window [mem 0x60000000-0x77efffff] [ 0.400407] pci 0000:03:01.0: bridge window [mem 0x6000000000-0x601fffffff 64bit pref] [ 0.400416] pci 0000:03:02.0: PCI bridge to [bus 38] [ 0.400422] pci 0000:03:02.0: bridge window [mem 0x77f00000-0x77ffffff] [ 0.400434] pci 0000:03:04.0: PCI bridge to [bus 39-6c] [ 0.400437] pci 0000:03:04.0: bridge window [io 0x6000-0x6fff] [ 0.400443] pci 0000:03:04.0: bridge window [mem 0x78000000-0x8dffffff] [ 0.400448] pci 0000:03:04.0: bridge window [mem 0x6020000000-0x6049ffffff 64bit pref] [ 0.400457] pci 0000:02:00.0: PCI bridge to [bus 03-6c] [ 0.400459] pci 0000:02:00.0: bridge window [io 0x5000-0x6fff] [ 0.400466] pci 0000:02:00.0: bridge window [mem 0x60000000-0x8e0fffff] [ 0.400471] pci 0000:02:00.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.400478] pci 0000:00:1b.0: PCI bridge to [bus 02-6c] [ 0.400481] pci 0000:00:1b.0: bridge window [io 0x5000-0x7fff] [ 0.400488] pci 0000:00:1b.0: bridge window [mem 0x60000000-0x8e0fffff] [ 0.400492] pci 0000:00:1b.0: bridge window [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.400501] pci 0000:00:1d.0: PCI bridge to [bus 6d] [ 0.400507] pci 0000:00:1d.0: bridge window [mem 0x90500000-0x905fffff] [ 0.400520] pci 0000:00:1d.2: PCI bridge to [bus 6e] [ 0.400526] pci 0000:00:1d.2: bridge window [mem 0x90400000-0x904fffff] [ 0.400538] pci 0000:00:1d.6: PCI bridge to [bus 6f] [ 0.400545] pci 0000:00:1d.6: bridge window [mem 0x90300000-0x903fffff] [ 0.400557] pci 0000:00:1d.7: PCI bridge to [bus 70] [ 0.400563] pci 0000:00:1d.7: bridge window [mem 0x90200000-0x902fffff] [ 0.400575] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.400577] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.400578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.400579] pci_bus 0000:00: resource 7 [mem 0x60000000-0xdfffffff window] [ 0.400580] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.400580] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window] [ 0.400581] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.400582] pci_bus 0000:01: resource 1 [mem 0x8f000000-0x900fffff] [ 0.400583] pci_bus 0000:01: resource 2 [mem 0x6050000000-0x6061ffffff 64bit pref] [ 0.400584] pci_bus 0000:02: resource 0 [io 0x5000-0x7fff] [ 0.400585] pci_bus 0000:02: resource 1 [mem 0x60000000-0x8e0fffff] [ 0.400586] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.400587] pci_bus 0000:03: resource 0 [io 0x5000-0x6fff] [ 0.400587] pci_bus 0000:03: resource 1 [mem 0x60000000-0x8e0fffff] [ 0.400588] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref] [ 0.400589] pci_bus 0000:04: resource 1 [mem 0x8e000000-0x8e0fffff] [ 0.400590] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.400591] pci_bus 0000:05: resource 1 [mem 0x60000000-0x77efffff] [ 0.400592] pci_bus 0000:05: resource 2 [mem 0x6000000000-0x601fffffff 64bit pref] [ 0.400593] pci_bus 0000:38: resource 1 [mem 0x77f00000-0x77ffffff] [ 0.400594] pci_bus 0000:39: resource 0 [io 0x6000-0x6fff] [ 0.400595] pci_bus 0000:39: resource 1 [mem 0x78000000-0x8dffffff] [ 0.400595] pci_bus 0000:39: resource 2 [mem 0x6020000000-0x6049ffffff 64bit pref] [ 0.400596] pci_bus 0000:6d: resource 1 [mem 0x90500000-0x905fffff] [ 0.400597] pci_bus 0000:6e: resource 1 [mem 0x90400000-0x904fffff] [ 0.400598] pci_bus 0000:6f: resource 1 [mem 0x90300000-0x903fffff] [ 0.400599] pci_bus 0000:70: resource 1 [mem 0x90200000-0x902fffff] [ 0.400990] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.401011] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.401067] pci 0000:02:00.0: CLS mismatch (64 != 128), using 64 bytes [ 0.401149] pci 0000:02:00.0: enabling device (0002 -> 0003) [ 0.401401] DMAR: Intel-IOMMU force enabled due to platform opt in [ 0.401408] DMAR: No ATSR found [ 0.401409] DMAR: No SATC found [ 0.401409] DMAR: dmar0: Using Queued invalidation [ 0.401411] DMAR: dmar1: Using Queued invalidation [ 0.401639] pci 0000:00:02.0: Adding to iommu group 0 [ 0.401661] pci 0000:00:00.0: Adding to iommu group 1 [ 0.401671] pci 0000:00:01.0: Adding to iommu group 2 [ 0.401678] pci 0000:00:04.0: Adding to iommu group 3 [ 0.401687] pci 0000:00:12.0: Adding to iommu group 4 [ 0.401693] pci 0000:00:13.0: Adding to iommu group 5 [ 0.401706] pci 0000:00:14.0: Adding to iommu group 6 [ 0.401712] pci 0000:00:14.2: Adding to iommu group 6 [ 0.401724] pci 0000:00:15.0: Adding to iommu group 7 [ 0.401730] pci 0000:00:15.1: Adding to iommu group 7 [ 0.401739] pci 0000:00:16.0: Adding to iommu group 8 [ 0.401746] pci 0000:00:17.0: Adding to iommu group 9 [ 0.401759] pci 0000:00:1b.0: Adding to iommu group 10 [ 0.401767] pci 0000:00:1d.0: Adding to iommu group 11 [ 0.401776] pci 0000:00:1d.2: Adding to iommu group 12 [ 0.401785] pci 0000:00:1d.6: Adding to iommu group 13 [ 0.401795] pci 0000:00:1d.7: Adding to iommu group 14 [ 0.401815] pci 0000:00:1f.0: Adding to iommu group 15 [ 0.401822] pci 0000:00:1f.3: Adding to iommu group 15 [ 0.401829] pci 0000:00:1f.4: Adding to iommu group 15 [ 0.401836] pci 0000:00:1f.5: Adding to iommu group 15 [ 0.401839] pci 0000:01:00.0: Adding to iommu group 2 [ 0.401841] pci 0000:01:00.1: Adding to iommu group 2 [ 0.401854] pci 0000:02:00.0: Adding to iommu group 16 [ 0.401863] pci 0000:03:00.0: Adding to iommu group 17 [ 0.401872] pci 0000:03:01.0: Adding to iommu group 18 [ 0.401880] pci 0000:03:02.0: Adding to iommu group 19 [ 0.401889] pci 0000:03:04.0: Adding to iommu group 20 [ 0.401902] pci 0000:04:00.0: Adding to iommu group 21 [ 0.401915] pci 0000:38:00.0: Adding to iommu group 22 [ 0.401923] pci 0000:6d:00.0: Adding to iommu group 23 [ 0.401932] pci 0000:6e:00.0: Adding to iommu group 24 [ 0.401940] pci 0000:6f:00.0: Adding to iommu group 25 [ 0.401949] pci 0000:70:00.0: Adding to iommu group 26 [ 0.402093] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.402093] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.402094] software IO TLB: mapped [mem 0x000000004635b000-0x000000004a35b000] (64MB) [ 0.405363] Initialise system trusted keyrings [ 0.405368] Key type blacklist registered [ 0.405384] workingset: timestamp_bits=41 max_order=22 bucket_order=0 [ 0.413725] NET: Registered PF_ALG protocol family [ 0.413727] Key type asymmetric registered [ 0.413727] Asymmetric key parser 'x509' registered [ 0.413734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.413752] io scheduler mq-deadline registered [ 0.413753] io scheduler kyber registered [ 0.413758] io scheduler bfq registered [ 0.413927] pcieport 0000:00:01.0: PME: Signaling with IRQ 123 [ 0.414059] pcieport 0000:00:1b.0: PME: Signaling with IRQ 124 [ 0.414086] pcieport 0000:00:1b.0: pciehp: Slot #20 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.414375] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125 [ 0.414625] pcieport 0000:00:1d.2: PME: Signaling with IRQ 126 [ 0.414871] pcieport 0000:00:1d.6: PME: Signaling with IRQ 127 [ 0.415120] pcieport 0000:00:1d.7: PME: Signaling with IRQ 128 [ 0.415597] pcieport 0000:03:01.0: enabling device (0002 -> 0003) [ 0.415718] pcieport 0000:03:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.416031] pcieport 0000:03:04.0: enabling device (0002 -> 0003) [ 0.416164] pcieport 0000:03:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.416351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.417914] ACPI: AC: AC Adapter [ADP1] (on-line) [ 0.417989] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.418012] ACPI: button: Lid Switch [LID0] [ 0.418039] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.418058] ACPI: button: Power Button [PWRB] [ 0.433671] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.433676] ACPI: thermal: Thermal Zone [TZ01] (56 C) [ 0.433992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.434742] serial 0000:00:13.0: enabling device (0000 -> 0002) [ 0.435507] hpet_acpi_add: no address or irqs in _CRS [ 0.435599] ACPI: bus type drm_connector registered [ 0.435798] i915 0000:00:02.0: [drm] Found coffeelake (device ID 3e9b) integrated display version 9.00 stepping N/A [ 0.436533] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 0.436565] i915 0000:00:02.0: vgaarb: deactivate vga console [ 0.436629] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 0.448928] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.450485] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 0.484809] ACPI: battery: Slot [BAT0] (battery present) [ 1.409599] tsc: Refined TSC clocksource calibration: 2592.000 MHz [ 1.409605] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 1.409678] clocksource: Switched to clocksource tsc [ 1.581790] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 1.583837] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.583959] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.583973] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 1.583986] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input3 [ 1.608890] fbcon: i915drmfb (fb0) is primary device [ 2.728486] Console: switching to colour frame buffer device 240x67 [ 2.736961] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.737836] ahci 0000:00:17.0: version 3.0 [ 2.737906] nvme nvme0: pci function 0000:6d:00.0 [ 2.737921] nvme nvme1: pci function 0000:6e:00.0 [ 2.749523] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 3 Gbps, RAID mode [ 2.749526] ahci 0000:00:17.0: 0/16 ports implemented (port mask 0x0) [ 2.749527] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst [ 2.752105] scsi host0: ahci [ 2.754033] scsi host1: ahci [ 2.756944] scsi host2: ahci [ 2.758356] scsi host3: ahci [ 2.758667] scsi host4: ahci [ 2.759110] scsi host5: ahci [ 2.759730] scsi host6: ahci [ 2.760276] scsi host7: ahci [ 2.760489] scsi host8: ahci [ 2.760909] scsi host9: ahci [ 2.761166] scsi host10: ahci [ 2.761335] scsi host11: ahci [ 2.761422] scsi host12: ahci [ 2.761526] scsi host13: ahci [ 2.761673] scsi host14: ahci [ 2.761715] scsi host15: ahci [ 2.761842] ata1: DUMMY [ 2.761843] ata2: DUMMY [ 2.761843] ata3: DUMMY [ 2.761843] ata4: DUMMY [ 2.761844] ata5: DUMMY [ 2.761844] ata6: DUMMY [ 2.761845] ata7: DUMMY [ 2.761845] ata8: DUMMY [ 2.761845] ata9: DUMMY [ 2.761846] ata10: DUMMY [ 2.761846] ata11: DUMMY [ 2.761846] ata12: DUMMY [ 2.761847] ata13: DUMMY [ 2.761847] ata14: DUMMY [ 2.761848] ata15: DUMMY [ 2.761848] ata16: DUMMY [ 2.762002] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.762003] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.763232] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.763682] rtc_cmos 00:02: RTC can wake from S4 [ 2.767427] rtc_cmos 00:02: registered as rtc0 [ 2.768239] rtc_cmos 00:02: setting system clock to 2025-04-20T08:50:02 UTC (1745139002) [ 2.768301] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 2.768623] nvme nvme0: 8/0/0 default/read/poll queues [ 2.769498] intel_pstate: Intel P-state driver initializing [ 2.770259] intel_pstate: Disabling energy efficiency optimization [ 2.770260] intel_pstate: HWP enabled [ 2.770310] drop_monitor: Initializing network drop monitor service [ 2.770354] NET: Registered PF_PACKET protocol family [ 2.770503] nvme0n1: p1 p2 p3 p4 p5 p6 p7 [ 2.771103] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 2.771439] microcode: Current revision: 0x000000fa [ 2.771441] microcode: Updated early from: 0x000000f4 [ 2.771891] IPI shorthand broadcast: enabled [ 2.773207] sched_clock: Marking stable (2760000850, 12741227)->(2796351265, -23609188) [ 2.773403] registered taskstats version 1 [ 2.773924] Loading compiled-in X.509 certificates [ 2.774608] Loaded X.509 cert 'Build time autogenerated kernel key: f848dbce02d0f5d6c2cb631f5a88a63fe86f9422' [ 2.776579] zswap: loaded using pool zstd/zsmalloc [ 2.776649] Demotion targets for Node 0: null [ 2.776882] RAS: Correctable Errors collector initialized. [ 2.777177] PM: Image not found (code -22) [ 2.777188] clk: Disabling unused clocks [ 2.781278] nvme nvme1: 8/0/0 default/read/poll queues [ 2.786582] nvme1n1: p1 [ 2.827144] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.828138] EXT4-fs (nvme1n1p1): mounted filesystem 97f88a37-e20a-456b-bd0e-2b9d7d0b95bb ro with ordered data mode. Quota mode: disabled. [ 2.828147] VFS: Mounted root (ext4 filesystem) readonly on device 259:9. [ 2.828316] devtmpfs: mounted [ 2.828788] Freeing unused kernel image (initmem) memory: 2608K [ 2.828800] Write protecting the kernel read-only data: 24576k [ 2.829414] Freeing unused kernel image (text/rodata gap) memory: 1792K [ 2.829558] Freeing unused kernel image (rodata/data gap) memory: 436K [ 2.840712] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.840716] Run /sbin/init as init process [ 2.840717] with arguments: [ 2.840718] /sbin/init [ 2.840719] nowatchdog [ 2.840720] with environment: [ 2.840721] HOME=/ [ 2.840721] TERM=linux [ 2.840722] BOOT_IMAGE=/vmlinuz-6.14.0-00001-g13b71297a835 [ 2.999535] NET: Registered PF_INET6 protocol family [ 2.999970] Segment Routing with IPv6 [ 2.999984] In-situ OAM (IOAM) with IPv6 [ 4.257099] input: Wireless hotkeys as /devices/virtual/input/input5 [ 4.273182] hid: raw HID events driver (C) Jiri Kosina [ 4.275190] input: Intel HID events as /devices/platform/INT33D5:00/input/input6 [ 4.276806] intel_pmc_core INT33A1:00: initialized [ 4.277136] intel-hid INT33D5:00: platform supports 5 button array [ 4.278914] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7 [ 4.290429] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.290568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.291773] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 4.292809] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.295312] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 4.295551] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.295554] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.295557] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 4.295644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 4.295659] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.295661] usb usb1: Product: xHCI Host Controller [ 4.295662] usb usb1: Manufacturer: Linux 6.14.0-00001-g13b71297a835 xhci-hcd [ 4.295663] usb usb1: SerialNumber: 0000:00:14.0 [ 4.297787] hub 1-0:1.0: USB hub found [ 4.297822] hub 1-0:1.0: 16 ports detected [ 4.298954] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 4.301216] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 4.304109] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 4.311677] ACPI: bus type thunderbolt registered [ 4.311881] intel_rapl_common: Found RAPL domain package [ 4.311885] intel_rapl_common: Found RAPL domain core [ 4.311885] intel_rapl_common: Found RAPL domain uncore [ 4.311886] intel_rapl_common: Found RAPL domain dram [ 4.311981] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.312015] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.313702] rtsx_pci 0000:70:00.0: enabling device (0000 -> 0002) [ 4.314148] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.320564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 4.320569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.320570] usb usb2: Product: xHCI Host Controller [ 4.320572] usb usb2: Manufacturer: Linux 6.14.0-00001-g13b71297a835 xhci-hcd [ 4.320573] usb usb2: SerialNumber: 0000:00:14.0 [ 4.324322] hub 2-0:1.0: USB hub found [ 4.324342] hub 2-0:1.0: 8 ports detected [ 4.326542] pstore: Using crash dump compression: deflate [ 4.337463] intel_rapl_common: Found RAPL domain package [ 4.337634] intel_rapl_common: Found RAPL domain dram [ 4.339430] spi-nor spi0.0: supply vcc not found, using dummy regulator [ 4.354780] Creating 1 MTD partitions on "0000:00:1f.5": [ 4.354784] 0x000000000000-0x000001000000 : "BIOS" [ 4.370881] xhci_hcd 0000:38:00.0: xHCI Host Controller [ 4.370889] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 3 [ 4.372613] xhci_hcd 0000:38:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 4.375216] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.375218] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.375219] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.375220] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.375221] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.376336] xhci_hcd 0000:38:00.0: xHCI Host Controller [ 4.376341] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 4 [ 4.376345] xhci_hcd 0000:38:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 4.376399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 4.376402] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.376404] usb usb3: Product: xHCI Host Controller [ 4.376406] usb usb3: Manufacturer: Linux 6.14.0-00001-g13b71297a835 xhci-hcd [ 4.376407] usb usb3: SerialNumber: 0000:38:00.0 [ 4.377092] hub 3-0:1.0: USB hub found [ 4.377112] hub 3-0:1.0: 2 ports detected [ 4.378534] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 4.378536] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.378537] usb usb4: Product: xHCI Host Controller [ 4.378538] usb usb4: Manufacturer: Linux 6.14.0-00001-g13b71297a835 xhci-hcd [ 4.378539] usb usb4: SerialNumber: 0000:38:00.0 [ 4.382690] hub 4-0:1.0: USB hub found [ 4.382718] hub 4-0:1.0: 2 ports detected [ 4.453435] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: IRQ triggered but there's no data [ 4.468388] pstore: Registered efi_pstore as persistent store backend [ 4.470031] nvidia: loading out-of-tree module taints kernel. [ 4.470037] nvidia: module license 'NVIDIA' taints kernel. [ 4.470038] Disabling lock debugging due to kernel taint [ 4.470040] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.470040] nvidia: module license taints kernel. [ 4.566083] usb 1-4: new full-speed USB device number 2 using xhci_hcd [ 4.595952] cryptd: max_cpu_qlen set to 1000 [ 4.596319] input: ELAN2514:00 04F3:2990 Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input8 [ 4.597869] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[ 4.598668] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.601772] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.601964] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 4.602377] AES CTR mode by8 optimization enabled
[ 4.606963] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 4.607008] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 4.607061] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 4.607123] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.607129] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.610723] intel_tcc_cooling: Programmable TCC Offset detected
[ 4.610734] Intel(R) Wireless WiFi driver for Linux
[ 4.611114] iwlwifi 0000:6f:00.0: enabling device (0000 -> 0002)
[ 4.621496] iwlwifi 0000:6f:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
[ 4.621908] iwlwifi 0000:6f:00.0: PCI dev 2723/008c, rev=0x340, rfid=0x10a100
[ 4.621911] iwlwifi 0000:6f:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz
[ 4.627412] iwlwifi 0000:6f:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 4.627652] iwlwifi 0000:6f:00.0: loaded firmware version 77.b405f9d4.0 cc-a0-77.ucode op_mode iwlmvm
[ 4.643060] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input15
[ 4.666608] input: ELAN2514:00 04F3:2990 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input9
[ 4.666840] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input16
[ 4.666968] input: ELAN2514:00 04F3:2990 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input10
[ 4.667002] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input17
[ 4.667088] input: ELAN2514:00 04F3:2990 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input11
[ 4.667145] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input18
[ 4.667207] hid-generic 0018:04F3:2990.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2514:00 04F3:2990] on i2c-ELAN2514:00
[ 4.667776] input: SYNA329A:00 06CB:CD4F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA329A:00/0018:06CB:CD4F.0002/input/input19
[ 4.667954] input: SYNA329A:00 06CB:CD4F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA329A:00/0018:06CB:CD4F.0002/input/input21
[ 4.668176] hid-generic 0018:06CB:CD4F.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA329A:00 06CB:CD4F] on i2c-SYNA329A:00
[ 4.691469] hp_wmi: Registered as platform profile handler
[ 4.701007] usb 1-4: New USB device found, idVendor=06cb, idProduct=00bb, bcdDevice= 1.64
[ 4.701010] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.701011] usb 1-4: SerialNumber: f61a948625ee
[ 4.706852] sof-audio-pci-intel-cnl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 4.706947] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 4.706977] sof-audio-pci-intel-cnl 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa10fa260)
[ 4.716010] sof-audio-pci-intel-cnl 0000:00:1f.3: use msi interrupt mode
[ 4.733560] sof-audio-pci-intel-cnl 0000:00:1f.3: hda codecs found, mask 5
[ 4.733563] sof-audio-pci-intel-cnl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 4.733564] sof-audio-pci-intel-cnl 0000:00:1f.3: BT link detected in NHLT tables: 0x0
[ 4.733566] sof-audio-pci-intel-cnl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 4.736603] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware paths/files for ipc type 0:
[ 4.736605] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware file: intel/sof/sof-cfl.ri
[ 4.736606] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology file: intel/sof-tplg/sof-hda-generic-2ch.tplg
[ 4.736894] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.736953] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 4.737919] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 4.737920] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[ 4.782858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 570.133.07 Fri Mar 14 13:12:07 UTC 2025
[ 4.790542] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 570.133.07 Fri Mar 14 12:42:57 UTC 2025
[ 4.791612] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 4.817261] typec port1: bound usb4-port1 (ops 0xffffffffa114dfd0)
[ 4.817267] typec port1: bound usb1-port2 (ops 0xffffffffa114dfd0)
[ 4.822751] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 4.830780] input: ELAN2514:00 04F3:2990 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input22
[ 4.830913] input: ELAN2514:00 04F3:2990 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input23
[ 4.831134] input: ELAN2514:00 04F3:2990 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input24
[ 4.831310] input: ELAN2514:00 04F3:2990 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN2514:00/0018:04F3:2990.0001/input/input25
[ 4.831567] hid-multitouch 0018:04F3:2990.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2514:00 04F3:2990] on i2c-ELAN2514:00
[ 4.850315] iwlwifi 0000:6f:00.0: Detected RF HR B3, rfid=0x10a100
[ 4.877683] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 4.877686] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[ 4.881050] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:1
[ 4.881223] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[ 4.899333] snd_hda_codec_realtek ehdaudio0D0: ALC285: picked fixup HP Spectre x360 15-df1xxx for PCI SSID 103c:863e
[ 4.908560] input: SYNA329A:00 06CB:CD4F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA329A:00/0018:06CB:CD4F.0002/input/input28
[ 4.908607] input: SYNA329A:00 06CB:CD4F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA329A:00/0018:06CB:CD4F.0002/input/input30
[ 4.908653] hid-multitouch 0018:06CB:CD4F.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA329A:00 06CB:CD4F] on i2c-SYNA329A:00
[ 4.911736] mousedev: PS/2 mouse device common for all mice
[ 4.921820] iwlwifi 0000:6f:00.0: base HW address: 50:eb:71:32:48:f3
[ 4.923840] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC285: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 4.923844] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.923846] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.923848] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
[ 4.923849] snd_hda_codec_realtek ehdaudio0D0: inputs:
[ 4.923851] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19
[ 4.956532] EXT4-fs (nvme1n1p1): re-mounted 97f88a37-e20a-456b-bd0e-2b9d7d0b95bb r/w. Quota mode: disabled.
[ 4.960581] EXT4-fs (nvme1n1p1): re-mounted 97f88a37-e20a-456b-bd0e-2b9d7d0b95bb r/w. Quota mode: disabled.
[ 4.965023] iwlwifi 0000:6f:00.0 wlo1: renamed from wlan0
[ 4.966791] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4
[ 4.978451] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 4.989189] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 4.999347] hid-generic 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 5.001271] EXT4-fs (nvme0n1p4): mounted filesystem 5d633ed2-0d9c-433c-a301-088337831aa6 r/w with ordered data mode. Quota mode: disabled.
[ 5.002266] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
[ 5.002624] EXT4-fs (nvme0n1p7): mounted filesystem 7caf2eed-b428-4022-95f7-5d7fc532eeca r/w with ordered data mode. Quota mode: disabled.
[ 5.005188] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 5.006521] EXT4-fs (nvme0n1p5): mounted filesystem 31ba8130-28a2-4bb8-9c13-36fd9d2a8eb4 r/w with ordered data mode. Quota mode: disabled.
[ 5.006634] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 5.007920] hid-sensor-hub 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
[ 5.008395] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
[ 5.013078] fuse: init (API version 7.42)
[ 5.113607] usb 1-6: New USB device found, idVendor=04f2, idProduct=b67b, bcdDevice= 0.11
[ 5.113611] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.113612] usb 1-6: Product: HP Wide Vision FHD Camera
[ 5.113613] usb 1-6: Manufacturer: Generic
[ 5.113614] usb 1-6: SerialNumber: 200901010001
[ 5.256086] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 5.257840] Adding 7340028k swap on /home/swapfile. Priority:-2 extents:44 across:13918208k SS
[ 5.276841] zram: Added device: zram0
[ 5.276955] zram: Added device: zram1
[ 5.288269] zram0: detected capacity change from 0 to 16777216
[ 5.325161] EXT4-fs (zram0): mounted filesystem ab23ee13-ab0a-45a1-b88e-5e97e2debce5 r/w without journal. Quota mode: disabled.
[ 5.336777] zram1: detected capacity change from 0 to 16777216
[ 5.372368] EXT4-fs (zram1): mounted filesystem 72a76429-1ec4-4d89-921f-96acc3408f13 r/w without journal. Quota mode: disabled.
[ 5.388252] usb 1-7: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[ 5.388255] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.400602] mc: Linux media interface: v0.10
[ 5.407227] videodev: Linux video capture interface: v2.00
[ 5.409351] Bluetooth: Core ver 2.22
[ 5.409367] NET: Registered PF_BLUETOOTH protocol family
[ 5.409369] Bluetooth: HCI device and connection manager initialized
[ 5.409372] Bluetooth: HCI socket layer initialized
[ 5.409374] Bluetooth: L2CAP socket layer initialized
[ 5.409377] Bluetooth: SCO socket layer initialized
[ 5.414499] usbcore: registered new interface driver btusb
[ 5.424088] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[ 5.424141] Bluetooth: hci0: Boot Address: 0x24800
[ 5.424142] Bluetooth: hci0: Firmware Version: 132-3.24
[ 5.424143] Bluetooth: hci0: Firmware already loaded
[ 5.427504] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 5.435885] usb 1-6: Found UVC 1.50 device HP Wide Vision FHD Camera (04f2:b67b)
[ 5.442738] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1
[ 5.581715] usb 1-6: Found UVC 1.50 device HP Wide Vision FHD Camera (04f2:b67b)
[ 5.615399] usbcore: registered new interface driver uvcvideo
[ 5.735901] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input31
[ 5.735944] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input32
[ 5.735979] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input33
[ 5.736015] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input34
[ 5.736058] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1/input35
[ 7.417168] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.417171] Bluetooth: BNEP filters: protocol multicast
[ 7.417173] Bluetooth: BNEP socket layer initialized
[ 7.417848] Bluetooth: MGMT ver 1.23
[ 10.314987] wlo1: authenticate with a6:89:90:79:10:37 (local address=50:eb:71:32:48:f3)
[ 10.317355] wlo1: send auth to a6:89:90:79:10:37 (try 1/3)
[ 10.406817] wlo1: authenticated
[ 10.409599] wlo1: associate with a6:89:90:79:10:37 (try 1/3)
[ 10.466219] wlo1: RX AssocResp from a6:89:90:79:10:37 (capab=0x1531 status=0 aid=2)
[ 10.483997] wlo1: associated
[ 10.569292] wlo1: Limiting TX power to 14 (14 - 0) dBm as advertised by a6:89:90:79:10:37
[ 11.484847] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 12.350167] nvme nvme0: using unchecked data buffer
[ 12.360518] block nvme0n1: No UUID available providing old NGUID
[ 12.836110] Bluetooth: RFCOMM TTY layer initialized
[ 12.836130] Bluetooth: RFCOMM socket layer initialized
[ 12.836139] Bluetooth: RFCOMM ver 1.1100:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: [e0] Vendor Specific Information: Len=10 <?>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 123
IOMMU group: 2
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 3000-3fff [size=4K] [16-bit]
Memory behind bridge: 8f000000-900fffff [size=17M] [32-bit]
Prefetchable memory behind bridge: 6050000000-6061ffffff [size=288M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00238 Data: 0000
Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us
ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 8GT/s, Width x8
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Via WAKE#, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Capabilities: [d94 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630] (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 131
IOMMU group: 0
Region 0: Memory at 6062000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 4000000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Process Address Space ID (PASID)
PASIDCap: Exec- Priv-, Max PASID Width: 14
PASIDCtl: Enable- Exec- Priv-
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] Page Request Interface (PRI)
PRICtl: Enable- Reset-
PRISta: RF- UPRGI- Stopped+ PASID+
Page Request Capacity: 00008000, Page Request Allocation: 00000000
Kernel driver in use: i915
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 3
Region 0: Memory at 6063110000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device_pci_legacy
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 4
Region 0: Memory at 6063125000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:13.0 Serial controller: Intel Corporation Device a37c (rev 10) (prog-if 00 [8250])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
IOMMU group: 5
Region 0: Memory at 606311e000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel_ish_ipc
Kernel modules: intel_ish_ipc
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 151
IOMMU group: 6
Region 0: Memory at 6063100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=8/8 Maskable- 64bit+
Address: 00000000fee00618 Data: 0000
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 6
Region 0: Memory at 606311c000 (64-bit, non-prefetchable) [disabled] [size=8K] Region 2: Memory at 6063124000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
00:15.0 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 7
Region 0: Memory at 4010000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #1 (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 7
Region 0: Memory at 4010001000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 159
IOMMU group: 8
Region 0: Memory at 6063121000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee005f8 Data: 0000
Capabilities: [a4] Vendor Specific Information: Len=14 <?>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 10)
Subsystem: Hewlett-Packard Company Device 863e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 IOMMU group: 9 Region 0: Memory at 8e100000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at 8e103000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at 4090 [size=8] Region 3: I/O ports at 4080 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at 8e102000 (32-bit, non-prefetchable) [size=2K] Capabilities: [d0] MSI-X: Enable+ Count=1 Masked- Vector table: BAR=0 offset=00000000 PBA: BAR=1 offset=00000000 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Kernel driver in use: ahci
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
IOMMU group: 10
Bus: primary=00, secondary=02, subordinate=6c, sec-latency=0
I/O behind bridge: 5000-7fff [size=12K] [16-bit]
Memory behind bridge: 60000000-8e0fffff [size=737M] [32-bit]
Prefetchable memory behind bridge: 6000000000-6049ffffff [size=1184M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #17, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 8GT/s, Width x4
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #20, PowerLimit 25W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00258 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [150 v1] Precision Time Measurement
PTMCap: Requester- Responder+ Root+
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected+
PTMEffectiveGranularity: Unknown
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=40us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=44us
Capabilities: [220 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [250 v1] Downstream Port Containment
DpcCap: IntMsgNum 0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
DpcCtl: Trigger:0 Cmpl- INT- ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
Source: 0000
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 125
IOMMU group: 11
Bus: primary=00, secondary=6d, subordinate=6d, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 90500000-905fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #9, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 8GT/s, Width x2
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #12, PowerLimit 25W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00278 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [150 v1] Precision Time Measurement
PTMCap: Requester- Responder+ Root+
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected+
PTMEffectiveGranularity: Unknown
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=100us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=3100us
Capabilities: [220 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [250 v1] Downstream Port Containment
DpcCap: IntMsgNum 0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
DpcCtl: Trigger:0 Cmpl- INT- ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
Source: 0000
Kernel driver in use: pcieport
00:1d.2 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #11 (rev f0) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 126
IOMMU group: 12
Bus: primary=00, secondary=6e, subordinate=6e, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 90400000-904fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #11, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 8GT/s, Width x2
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #14, PowerLimit 25W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd+
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00298 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [150 v1] Precision Time Measurement
PTMCap: Requester- Responder+ Root+
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected+
PTMEffectiveGranularity: Unknown
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=100us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=3100us
Capabilities: [220 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [250 v1] Downstream Port Containment
DpcCap: IntMsgNum 0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
DpcCtl: Trigger:0 Cmpl- INT- ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
Source: 0000
Kernel driver in use: pcieport
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #15 (rev f0) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 127
IOMMU group: 13
Bus: primary=00, secondary=6f, subordinate=6f, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 90300000-903fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #15, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #18, PowerLimit 10W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee002b8 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [150 v1] Precision Time Measurement
PTMCap: Requester- Responder+ Root+
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected+
PTMEffectiveGranularity: Unknown
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=40us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=44us
Capabilities: [220 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [250 v1] Downstream Port Containment
DpcCap: IntMsgNum 0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
DpcCtl: Trigger:0 Cmpl- INT- ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
Source: 0000
Kernel driver in use: pcieport
00:1d.7 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #16 (rev f0) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 128
IOMMU group: 14
Bus: primary=00, secondary=70, subordinate=70, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 90200000-902fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #16, Speed 8GT/s, Width x1, ASPM L1, Exit Latency L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #19, PowerLimit 10W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd+
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee002f8 Data: 0000
Capabilities: [90] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn- NFERptEn- FERptEn-
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsgNum 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [140 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [150 v1] Precision Time Measurement
PTMCap: Requester- Responder+ Root+
PTMClockGranularity: 4ns
PTMControl: Enabled+ RootSelected+
PTMEffectiveGranularity: Unknown
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=60us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=60us
Capabilities: [220 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [250 v1] Downstream Port Containment
DpcCap: IntMsgNum 0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
DpcCtl: Trigger:0 Cmpl- INT- ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
DpcSta: Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
Source: 0000
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation HM470 Chipset LPC/eSPI Controller (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 15
00:1f.3 Multimedia audio controller: Intel Corporation Cannon Lake PCH cAVS (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 201
IOMMU group: 15
Region 0: Memory at 6063118000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at 6063000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00bf8 Data: 0000
Kernel driver in use: sof-audio-pci-intel-cnl
Kernel modules: snd_hda_intel, snd_sof_pci_intel_cnl
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 15
Region 0: Memory at 6063120000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 15
Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: intel-spi
Kernel modules: spi_intel_pci
01:00.0 VGA compatible controller: NVIDIA Corporation TU117M [GeForce GTX 1650 Mobile / Max-Q] (rev a1) (prog-if 00 [VGA controller])
DeviceName: NVIDIA GeForce GTX 1650
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 202
IOMMU group: 2
Region 0: Memory at 8f000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 6050000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 6060000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Expansion ROM at 90000000 [virtual] [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00c18 Data: 0000
Capabilities: [78] Express (v2) Legacy Endpoint, IntMsgNum 0
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [250 v1] Latency Tolerance Reporting
Max snoop latency: 34326183936ns
Max no snoop latency: 34326183936ns
Capabilities: [258 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=255us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [420 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [bb0 v1] Physical Resizable BAR
BAR 0: current size: 16MB, supported: 16MB
BAR 1: current size: 256MB, supported: 64MB 128MB 256MB
BAR 3: current size: 32MB, supported: 32MB
Kernel driver in use: nvidia
Kernel modules: nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation Device 10fa (rev a1)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 2
Region 0: Memory at 90080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Physical Slot: 20
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 16
Bus: primary=02, secondary=03, subordinate=6c, sec-latency=0
I/O behind bridge: 5000-6fff [size=8K] [16-bit]
Memory behind bridge: 60000000-8e0fffff [size=737M] [32-bit]
Prefetchable memory behind bridge: 6000000000-6049ffffff [size=1184M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [ac] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [c0] Express (v2) Upstream Port, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ SlotPowerLimit 25W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <2us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: Routing-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [800 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [a00 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=44us
Capabilities: [b00 v1] Precision Time Measurement
PTMCap: Requester- Responder- Root-
PTMClockGranularity: Unimplemented
PTMControl: Enabled+ RootSelected-
PTMEffectiveGranularity: 4ns
Kernel driver in use: pcieport
03:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 17
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: 8e000000-8e0fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [ac] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [c0] Express (v2) Downstream Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- ARIFwd-
AtomicOpsCap: Routing-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=1 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending+ InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [900 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
03:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 129
IOMMU group: 18
Bus: primary=03, secondary=05, subordinate=37, sec-latency=0
I/O behind bridge: 5000-5fff [size=4K] [16-bit]
Memory behind bridge: 60000000-77efffff [size=383M] [32-bit]
Prefetchable memory behind bridge: 6000000000-601fffffff [size=512M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00338 Data: 0000
Capabilities: [ac] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [c0] Express (v2) Downstream Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; LnkDisable- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 0W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- ARIFwd-
AtomicOpsCap: Routing-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: EgressBlck-
IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending+ InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [900 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
03:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
IOMMU group: 19
Bus: primary=03, secondary=38, subordinate=38, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: 77f00000-77ffffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [ac] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [c0] Express (v2) Downstream Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr+ FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; LnkDisable- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- ARIFwd-
AtomicOpsCap: Routing-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: EgressBlck-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 14, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 34000000 00000010 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [900 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
03:04.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 130
IOMMU group: 20
Bus: primary=03, secondary=39, subordinate=6c, sec-latency=0
I/O behind bridge: 6000-6fff [size=4K] [16-bit]
Memory behind bridge: 78000000-8dffffff [size=352M] [32-bit]
Prefetchable memory behind bridge: 6020000000-6049ffffff [size=672M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00358 Data: 0000
Capabilities: [ac] Subsystem: Hewlett-Packard Company Device 863e
Capabilities: [c0] Express (v2) Downstream Port (Slot+), IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+ TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; LnkDisable- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 0W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- ARIFwd-
AtomicOpsCap: Routing-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
AtomicOpsCtl: EgressBlck-
IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [50] Capability ID 0x15 [0000]
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending+ InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [900 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir- CmpltRedir- UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
04:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] (rev 06)
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 21
Region 0: Memory at 8e000000 (32-bit, non-prefetchable) [size=256K]
Region 1: Memory at 8e040000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [a0] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000fa0
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt
38:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] (rev 06) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 178
IOMMU group: 22
Region 0: Memory at 77f00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [88] MSI: Enable+ Count=8/8 Maskable- 64bit+
Address: 00000000fee00a18 Data: 0000
Capabilities: [c0] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Device Serial Number 46-ad-24-91-d1-00-aa-00
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [300 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [400 v1] Power Budgeting <?>
Capabilities: [500 v1] Vendor Specific Information: ID=1234 Rev=1 Len=100 <?>
Capabilities: [600 v1] Vendor Specific Information: ID=8086 Rev=2 Len=04c <?>
Capabilities: [700 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [800 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
6d:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD H10 with Solid State Storage [Teton Glacier] (rev 03) (prog-if 02 [NVM Express])
Subsystem: Intel Corporation Device 8410
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 23
Region 0: Memory at 90500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 25W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x2
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00002100
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr-
PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [158 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [178 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [180 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=100us PortTPowerOnTime=3100us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=3100us
Kernel driver in use: nvme
6e:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD H10 with Solid State Storage [Teton Glacier] (prog-if 02 [NVM Express])
Subsystem: Intel Corporation Device 8510
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
IOMMU group: 24
Region 0: Memory at 90410000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at 90400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI-X: Enable+ Count=9 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [60] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x2
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [a0] MSI: Enable- Count=1/16 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [150 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Power Budgeting <?>
Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [2a0 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [2d0 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [310 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=100us PortTPowerOnTime=3100us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=3100us
Kernel driver in use: nvme
6f:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
DeviceName: Intel Dual Band Wireless-AC 9560 802.11 AC 2x2 WiFi + BT 5 Combo Adapter
Subsystem: Intel Corporation Device 008c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
IOMMU group: 25
Region 0: Memory at 90300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [40] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [14c v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [154 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=30us PortTPowerOnTime=18us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=44us
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
70:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
DeviceName: Realtek PCIE CardReader
Subsystem: Hewlett-Packard Company Device 863e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 164
IOMMU group: 26
Region 1: Memory at 90200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00798 Data: 0000
Capabilities: [b0] Express (v2) Endpoint, IntMsgNum 0
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W TEE-IO-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn-
IDOReq- IDOCompl- LTR+ EmergencyPowerReductionReq-
10BitTagReq- OBFF Disabled, EETLPPrefixBlk-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CorrIntErr- HeaderOF-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr+ HeaderOF-
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [148 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
Capabilities: [158 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [160 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=60us PortTPowerOnTime=60us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=81920ns
L1SubCtl2: T_PwrOn=60us
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
Hi all,
Quoted 96 lines · Bjorn Helgaas
Quoted 7 lines · Sergey Dolgov
Dear Bjorn,
one (probably the main) power user is the CPU at shallow C states post
7afeb84d14ea. Even at some load (like web browsing) the CPU spends most time in C7 after reverting7afeb84d14ea, in contrast to C3 even at idle in the original 6.14.0. So the main question is what can make the CPU busy with larger LTR_L1.2_THRESHOLDs?That's a good question and I have no idea what the answer is. Obviously a larger LTR_L1.2_THRESHOLD means less time in L1.2, but I don't know how that translates to CPU C states.
These bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=218394
https://bugzilla.kernel.org/show_bug.cgi?id=215832mention C states and ASPM. I added some of those folks to cc.
Quoted 7 lines
I do have Win10 too, but neither Win binaries of pciutils nor Device Manager show LTR_L1.2_THRESHOLD. lspci -vv run as Administrator does report some "latencies" though. Some of them are significantly smaller, e.g. "Exit Latency L0s <1us, L1 <16us" for the bridge 00:1d.6, others are significantly larger, e.g. "Exit Latency L1 unlimited" for the NVMe 6e:00.0, than the LTR_L1.2_THRESHOLDs calculated by Linux. The full log is attached.
I think I'm missing your point here. The L0s/L1 Acceptable Latencies and the L0s/L1 Exit Latencies I see in your Win10 lspci are the same as in Windows, which is what I would expect because these are read-only Device and Link Capability registers and the OS can't influence them:
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #15
LnkCap: Port #15, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us6e:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD H10
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 unlimitedThe DevCap L0s and L1 Acceptable Latencies are "the acceptable total latency that an Endpoint can withstand due to transition from L0s or L1 to L0. It is essentially an indirect measure of the Endpoint's internal buffering."
The LnkCap L0s and L1 Exit Latencies are the "time the Port requires to complete transitions from L0s or L1 to L0."
I don't know how to relate LTR_L1.2_THRESHOLD to L1. I do know that L0s and L1 were part of PCIe r2.1, but it wasn't until r3.1 that the L1.1 and L1.2 substates were added and L1 was renamed to L1.0. So I expect the L1 latencies to be used to enable L1.0 by itself, and I assume LTR and LTR_L1.2_THRESHOLD are used separately to further enable L1.2.
Quoted 4 lines
But do we need to care about precise values? At least we know now that
7afeb84d14eahas only increased the thresholds, slightly. What happens if they are underestimated? Can this lead to severe problems, e.g. data corruption on NVMes?IIUC, LTR messages are essentially a way for the device to say "I have enough local buffer space to hold X ns worth of traffic while I'm waiting for the link to return to L0."
Then we should only put the link in L1.2 if we can get to L1.2 and back to L0 in X ns or less, and LTR_L1.2_THRESHOLD is basically the minimum L0 -> L1.2 -> L0 time.
If we set LTR_L1.2_THRESHOLD lower than it should be, it seems like we're at risk of overrunning the device's local buffer. Maybe that's OK and the device needs to be able to tolerate that, but it does feel risky to me.
There's also the LTR Capability that "specifies the maximum latency a device is permitted to request. Software should set this to the platform's maximum supported latency or less." Evidently drivers can set this (only amdgpu does, AFAICS), but I have no idea how to use it.
I suppose setting it to something less than LTR_L1.2_THRESHOLD might cause L1.2 to be used more? This would be writable via setpci, and it looks like it can be updated any time. If you want to play with it, the value and scale are encoded the same way as
encode_l12_threshold(), andPCI_EXT_CAP_ID_LTRand related #defines show the register layouts.Quoted 5 lines
If not (and I've never seen one using 5.15 kernels for 4 years), can we reprogram LTR_L1.2_THRESHOLDs at runtime? Like for the CPU, introduce 'performance' and 'powersave' governors for the PCI, which set the thresholds to, say, 2x and 0.5x (2 + 4 +
t_common_mode+t_power_on), respectively.
Quoted 52 lines
I don't think I would support a sysfs or similar interface to tweak this. Right now computing LTR_L1.2_THRESHOLD already feels like a bit of black magic, and tweaking it would be farther down the road of "well, it seems to help this situation, but we don't really know why."
Quoted 47 lines · Bjorn Helgaas
Quoted 46 lines · Sergey Dolgov
Quoted 3 lines
Dear Bjorn,
here are both dmesg from the kernels with your info patch.
Thanks again! Here's the difference:
- pre
7afeb84d14ea
+ post7afeb84d14eapci 0000:02:00.0: parent CMRT
0x28child CMRT0x00
pci 0000:02:00.0: parentT_POWER_ON0x2cusec (val0x16scale 0) pci 0000:02:00.0: childT_POWER_ON0x0ausec (val0x5scale 0) pci 0000:02:00.0:t_common_mode0x28t_power_on0x2cl1_2_threshold0x5a
-pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x02scale 3 +pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x58scale 2We computed LTR_L1.2_THRESHOLD ==
0x5a== 90 usec == 90000 nsec.Prior to
7afeb84d14ea, we computed *scale = 3, *value = (90000 >> 15) == 0x2. But per PCIe r6.0, sec 6.18, this is a latency value of only0x2* 32768 == 65536 ns, which is less than the 90000 ns we requested.After
7afeb84d14ea, we computed *scale = 2, *value =roundup(threshold_ns, 1024)/ 1024 ==0x58, which is a latency value of 90112 ns, which is almost exactly what we requested.In essence, before
7afeb84d14eawe tell the Root Port that it can enter L1.2 and get back to L0 in 65536 ns or less, and after7afeb84d14ea, we tell it that it may take up to 90112 ns.It's possible that the calculation of LTR_L1.2_THRESHOLD itself in
aspm_calc_l12_info()is too conservative, and we don't actually need 90 usec, but I think the encoding done by7afeb84d14eaitself is more correct. I don't have any information about how to improve 90 usec estimate. (If you happen to have Windows on that box, it would be really interesting to see how it sets LTR_L1.2_THRESHOLD.)If the device has sent LTR messages indicating a latency requirement between 65536 ns and 90112 ns, the pre-7afeb84d14ea kernel would allow L1.2 while post
7afeb84d14eawould not. I don't think we can actually see the LTR messages sent by the device, but my guess is they must be in that range. I don't know if that's enough to account for the major difference in power consumption you're seeing.
If the Root Port is attached to a controller in the South Complex — which would be the case on a Cannon Lake–based platform — you can observe the resulting LTR value sent from the Port using the pmc_core driver:
cat /sys/kernel/debug/pmc_core/ltr_show | grep SOUTHPORT
Needs CONFIG_INTEL_PMC_CORE which the major distros set.
The SOUTHPORTs correspond to Root Ports. Unfortunately, we don’t currently have a mapping between the internal PMC SOUTHPORT_X designation and the PCI Bus enumeration. However, since this behavior clearly affects C-state entry, you should be able to narrow it down by monitoring this file — ideally capturing several snapshots, as the values can change depending on device activity.
Note that the value shown may not exactly match what was sent in the LTR message, but it won’t be smaller. My current assumption (pending confirmation) is that simply entering L1.2 increases the effective LTR value observed by the CPU, since it’s unlikely that the LTR message value itself changes solely as a result of modifying the threshold.
Incidentally, you can also ignore the LTR from the Port by writing the bit value (first column) to the ltr_ignore file in the same folder. This is for testing only as it ignores device activity. But you should see deeper C state residency after ignoring the problem Port, which would be a way to narrow down the SOUTHPORT as well. The LTR consideration can be restored by writing the same bit value to the ltr_restore file.
David
Quoted 17 lines
Quoted 15 lines
Quoted 15 lines
The AX200 at 6f:00.0 is in exactly the same situation as the Thunderbolt bridge at 02:00.0 (LTR_L1.2_THRESHOLD 90 usec, RP set to 65536 ns before
7afeb84d14eaand 90112 ns after).For the NVMe devices at 6d:00.0 and 6e:00.0, LTR_L1.2_THRESHOLD is 3206 usec (!), and we set the RP to 3145728 ns (slightly too small) before, 3211264 ns after.
For the RTS525A at 70:00.0, LTR_L1.2_THRESHOLD is 126 usec, and we set the RP to 98304 ns before, 126976 ns after.
Sorry, no real answers here yet, still puzzled.
Bjorn
Dear David,
I've seen only the following SOUTHPORT LTR values in different combinations depending on device activity:
######## No disk activity but varying workload otherwise (idle CPU, NVIDIA GPU sleeping or not, glxgears on either Intel or NVIDIA GPU, audio playback or not): LTR values fluctuate between
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x90039003
Non-Snoop(ns): 3145728 Snoop(ns): 3145728
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
and
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x90039003
Non-Snoop(ns): 3145728 Snoop(ns): 3145728
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6
Non-Snoop(ns): 186368 Snoop(ns): 186368 LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
SOUTHPORT_D is probably connected to the wifi:
######## ping -A ip route list default | awk '{print $3}' : LTR values are constant at
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x90039003
Non-Snoop(ns): 3145728 Snoop(ns): 3145728
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6
Non-Snoop(ns): 186368 Snoop(ns): 186368 LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
In contrast, with RFKILL'd wifi and bluetooth SOUTHPORT_D LTRs are all 0.
SOUTHPORT_C is probably connected to the NVMes:
######## du -ch /
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x88468846
Non-Snoop(ns): 71680 Snoop(ns): 71680
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x880a880a
Non-Snoop(ns): 10240 Snoop(ns): 10240
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6
Non-Snoop(ns): 186368 Snoop(ns): 186368 LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
0 PMC0:SOUTHPORT_A LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW: 0x880a880a
Non-Snoop(ns): 10240 Snoop(ns): 10240
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW: 0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
These values are independent of the kernel (original 6.14.0 or that with Bjorn's patch skipping L1.2 config).
Thanks.
Sergey.
Quoted 200 lines · David E. Box
Hi all,
Quoted 96 lines · Bjorn Helgaas
Quoted 7 lines · Sergey Dolgov
Dear Bjorn,
one (probably the main) power user is the CPU at shallow C states post
7afeb84d14ea. Even at some load (like web browsing) the CPU spends most time in C7 after reverting7afeb84d14ea, in contrast to C3 even at idle in the original 6.14.0. So the main question is what can make the CPU busy with larger LTR_L1.2_THRESHOLDs?That's a good question and I have no idea what the answer is. Obviously a larger LTR_L1.2_THRESHOLD means less time in L1.2, but I don't know how that translates to CPU C states.
These bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=218394
https://bugzilla.kernel.org/show_bug.cgi?id=215832mention C states and ASPM. I added some of those folks to cc.
Quoted 7 lines
I do have Win10 too, but neither Win binaries of pciutils nor Device Manager show LTR_L1.2_THRESHOLD. lspci -vv run as Administrator does report some "latencies" though. Some of them are significantly smaller, e.g. "Exit Latency L0s <1us, L1 <16us" for the bridge 00:1d.6, others are significantly larger, e.g. "Exit Latency L1 unlimited" for the NVMe 6e:00.0, than the LTR_L1.2_THRESHOLDs calculated by Linux. The full log is attached.
I think I'm missing your point here. The L0s/L1 Acceptable Latencies and the L0s/L1 Exit Latencies I see in your Win10 lspci are the same as in Windows, which is what I would expect because these are read-only Device and Link Capability registers and the OS can't influence them:
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port
#15
LnkCap: Port #15, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s
<1us, L1 <16us6e:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD
H10
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 unlimitedThe DevCap L0s and L1 Acceptable Latencies are "the acceptable total latency that an Endpoint can withstand due to transition from L0s or L1 to L0. It is essentially an indirect measure of the Endpoint's internal buffering."
The LnkCap L0s and L1 Exit Latencies are the "time the Port requires to complete transitions from L0s or L1 to L0."
I don't know how to relate LTR_L1.2_THRESHOLD to L1. I do know that L0s and L1 were part of PCIe r2.1, but it wasn't until r3.1 that the L1.1 and L1.2 substates were added and L1 was renamed to L1.0. So I expect the L1 latencies to be used to enable L1.0 by itself, and I assume LTR and LTR_L1.2_THRESHOLD are used separately to further enable L1.2.
Quoted 4 lines
But do we need to care about precise values? At least we know now that
7afeb84d14eahas only increased the thresholds, slightly. What happens if they are underestimated? Can this lead to severe problems, e.g. data corruption on NVMes?IIUC, LTR messages are essentially a way for the device to say "I have enough local buffer space to hold X ns worth of traffic while I'm waiting for the link to return to L0."
Then we should only put the link in L1.2 if we can get to L1.2 and back to L0 in X ns or less, and LTR_L1.2_THRESHOLD is basically the minimum L0 -> L1.2 -> L0 time.
If we set LTR_L1.2_THRESHOLD lower than it should be, it seems like we're at risk of overrunning the device's local buffer. Maybe that's OK and the device needs to be able to tolerate that, but it does feel risky to me.
There's also the LTR Capability that "specifies the maximum latency a device is permitted to request. Software should set this to the platform's maximum supported latency or less." Evidently drivers can set this (only amdgpu does, AFAICS), but I have no idea how to use it.
I suppose setting it to something less than LTR_L1.2_THRESHOLD might cause L1.2 to be used more? This would be writable via setpci, and it looks like it can be updated any time. If you want to play with it, the value and scale are encoded the same way as
encode_l12_threshold(), andPCI_EXT_CAP_ID_LTRand related #defines show the register layouts.Quoted 5 lines
If not (and I've never seen one using 5.15 kernels for 4 years), can we reprogram LTR_L1.2_THRESHOLDs at runtime? Like for the CPU, introduce 'performance' and 'powersave' governors for the PCI, which set the thresholds to, say, 2x and 0.5x (2 + 4 +
t_common_mode+t_power_on), respectively.Quoted 52 lines
I don't think I would support a sysfs or similar interface to tweak this. Right now computing LTR_L1.2_THRESHOLD already feels like a bit of black magic, and tweaking it would be farther down the road of "well, it seems to help this situation, but we don't really know why."
Quoted 47 lines · Bjorn Helgaas
Quoted 46 lines · Sergey Dolgov
Quoted 3 lines
Dear Bjorn,
here are both dmesg from the kernels with your info patch.
Thanks again! Here's the difference:
- pre
7afeb84d14ea
+ post7afeb84d14eapci 0000:02:00.0: parent CMRT 0x28 child CMRT 0x00 pci 0000:02:00.0: parent T_POWER_ON 0x2c usec (val 0x16 scale 0) pci 0000:02:00.0: child T_POWER_ON 0x0a usec (val 0x5 scale 0) pci 0000:02:00.0: t_common_mode 0x28 t_power_on 0x2c l1_2_threshold
0x5a
-pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x02scale 3 +pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x58scale 2We computed LTR_L1.2_THRESHOLD ==
0x5a== 90 usec == 90000 nsec.Prior to
7afeb84d14ea, we computed *scale = 3, *value = (90000 >> 15) ==0x2. But per PCIe r6.0, sec 6.18, this is a latency value of only0x2* 32768 == 65536 ns, which is less than the 90000 ns we requested.After
7afeb84d14ea, we computed *scale = 2, *value =roundup(threshold_ns, 1024)/ 1024 ==0x58, which is a latency value of 90112 ns, which is almost exactly what we requested.In essence, before
7afeb84d14eawe tell the Root Port that it can enter L1.2 and get back to L0 in 65536 ns or less, and after7afeb84d14ea, we tell it that it may take up to 90112 ns.It's possible that the calculation of LTR_L1.2_THRESHOLD itself in
aspm_calc_l12_info()is too conservative, and we don't actually need 90 usec, but I think the encoding done by7afeb84d14eaitself is more correct. I don't have any information about how to improve 90 usec estimate. (If you happen to have Windows on that box, it would be really interesting to see how it sets LTR_L1.2_THRESHOLD.)If the device has sent LTR messages indicating a latency requirement between 65536 ns and 90112 ns, the pre-7afeb84d14ea kernel would allow L1.2 while post
7afeb84d14eawould not. I don't think we can actually see the LTR messages sent by the device, but my guess is they must be in that range. I don't know if that's enough to account for the major difference in power consumption you're seeing.If the Root Port is attached to a controller in the South Complex — which would be the case on a Cannon Lake–based platform — you can observe the resulting LTR value sent from the Port using the
pmc_coredriver:cat
/sys/kernel/debug/pmc_core/ltr_show| grep SOUTHPORTNeeds
CONFIG_INTEL_PMC_COREwhich the major distros set.The SOUTHPORTs correspond to Root Ports. Unfortunately, we don’t currently have a mapping between the internal PMC
SOUTHPORT_Xdesignation and the PCI Bus enumeration. However, since this behavior clearly affects C-state entry, you should be able to narrow it down by monitoring this file — ideally capturing several snapshots, as the values can change depending on device activity.Note that the value shown may not exactly match what was sent in the LTR message, but it won’t be smaller. My current assumption (pending confirmation) is that simply entering L1.2 increases the effective LTR value observed by the CPU, since it’s unlikely that the LTR message value itself changes solely as a result of modifying the threshold.
Incidentally, you can also ignore the LTR from the Port by writing the bit value (first column) to the
ltr_ignorefile in the same folder. This is for testing only as it ignores device activity. But you should see deeper C state residency after ignoring the problem Port, which would be a way to narrow down the SOUTHPORT as well. The LTR consideration can be restored by writing the same bit value to theltr_restorefile.David
Quoted 17 lines
Quoted 15 lines
Quoted 15 lines
The AX200 at 6f:00.0 is in exactly the same situation as the Thunderbolt bridge at 02:00.0 (LTR_L1.2_THRESHOLD 90 usec, RP set to 65536 ns before
7afeb84d14eaand 90112 ns after).For the NVMe devices at 6d:00.0 and 6e:00.0, LTR_L1.2_THRESHOLD is 3206 usec (!), and we set the RP to 3145728 ns (slightly too small) before, 3211264 ns after.
For the RTS525A at 70:00.0, LTR_L1.2_THRESHOLD is 126 usec, and we set the RP to 98304 ns before, 126976 ns after.
Sorry, no real answers here yet, still puzzled.
Bjorn
Dear Bjorn,
so, any interest in sending your patch upstream? Have you tested it on other devices? I have no other laptops I can boot Linux on, but I have upgraded the SSD a month ago, and the new one works fine without errors in SMART or DevSta at width x4 (max at my PCIe 3.0 port) with the same LTR1.2_Threshold of 81920ns.
Thanks.
Sergey.
Sergey.
Quoted 327 lines · Sergey Dolgov
Dear David,
I've seen only the following SOUTHPORT LTR values in different combinations depending on device activity:
######## No disk activity but varying workload otherwise (idle CPU, NVIDIA GPU sleeping or not, glxgears on either Intel or NVIDIA GPU, audio playback or not): LTR values fluctuate between
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0and
0 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
SOUTHPORT_Dis probably connected to the wifi:######## ping -A
ip route list default | awk '{print $3}': LTR values are constant at
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0In contrast, with RFKILL'd wifi and bluetooth
SOUTHPORT_DLTRs are all 0.
SOUTHPORT_Cis probably connected to the NVMes:######## du -ch /
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x88468846Non-Snoop(ns): 71680 Snoop(ns): 71680
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 00 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x880a880aNon-Snoop(ns): 10240 Snoop(ns): 10240 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 00 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x880a880aNon-Snoop(ns): 10240 Snoop(ns): 10240
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0These values are independent of the kernel (original 6.14.0 or that with Bjorn's patch skipping L1.2 config).
Thanks.
Sergey.Quoted 200 lines · David E. Box
Hi all,
Quoted 96 lines · Bjorn Helgaas
Quoted 7 lines · Sergey Dolgov
Dear Bjorn,
one (probably the main) power user is the CPU at shallow C states post
7afeb84d14ea. Even at some load (like web browsing) the CPU spends most time in C7 after reverting7afeb84d14ea, in contrast to C3 even at idle in the original 6.14.0. So the main question is what can make the CPU busy with larger LTR_L1.2_THRESHOLDs?That's a good question and I have no idea what the answer is. Obviously a larger LTR_L1.2_THRESHOLD means less time in L1.2, but I don't know how that translates to CPU C states.
These bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=218394
https://bugzilla.kernel.org/show_bug.cgi?id=215832mention C states and ASPM. I added some of those folks to cc.
Quoted 7 lines
I do have Win10 too, but neither Win binaries of pciutils nor Device Manager show LTR_L1.2_THRESHOLD. lspci -vv run as Administrator does report some "latencies" though. Some of them are significantly smaller, e.g. "Exit Latency L0s <1us, L1 <16us" for the bridge 00:1d.6, others are significantly larger, e.g. "Exit Latency L1 unlimited" for the NVMe 6e:00.0, than the LTR_L1.2_THRESHOLDs calculated by Linux. The full log is attached.
I think I'm missing your point here. The L0s/L1 Acceptable Latencies and the L0s/L1 Exit Latencies I see in your Win10 lspci are the same as in Windows, which is what I would expect because these are read-only Device and Link Capability registers and the OS can't influence them:
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port
#15
LnkCap: Port #15, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s
<1us, L1 <16us6e:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD
H10
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 unlimitedThe DevCap L0s and L1 Acceptable Latencies are "the acceptable total latency that an Endpoint can withstand due to transition from L0s or L1 to L0. It is essentially an indirect measure of the Endpoint's internal buffering."
The LnkCap L0s and L1 Exit Latencies are the "time the Port requires to complete transitions from L0s or L1 to L0."
I don't know how to relate LTR_L1.2_THRESHOLD to L1. I do know that L0s and L1 were part of PCIe r2.1, but it wasn't until r3.1 that the L1.1 and L1.2 substates were added and L1 was renamed to L1.0. So I expect the L1 latencies to be used to enable L1.0 by itself, and I assume LTR and LTR_L1.2_THRESHOLD are used separately to further enable L1.2.
Quoted 4 lines
But do we need to care about precise values? At least we know now that
7afeb84d14eahas only increased the thresholds, slightly. What happens if they are underestimated? Can this lead to severe problems, e.g. data corruption on NVMes?IIUC, LTR messages are essentially a way for the device to say "I have enough local buffer space to hold X ns worth of traffic while I'm waiting for the link to return to L0."
Then we should only put the link in L1.2 if we can get to L1.2 and back to L0 in X ns or less, and LTR_L1.2_THRESHOLD is basically the minimum L0 -> L1.2 -> L0 time.
If we set LTR_L1.2_THRESHOLD lower than it should be, it seems like we're at risk of overrunning the device's local buffer. Maybe that's OK and the device needs to be able to tolerate that, but it does feel risky to me.
There's also the LTR Capability that "specifies the maximum latency a device is permitted to request. Software should set this to the platform's maximum supported latency or less." Evidently drivers can set this (only amdgpu does, AFAICS), but I have no idea how to use it.
I suppose setting it to something less than LTR_L1.2_THRESHOLD might cause L1.2 to be used more? This would be writable via setpci, and it looks like it can be updated any time. If you want to play with it, the value and scale are encoded the same way as
encode_l12_threshold(), andPCI_EXT_CAP_ID_LTRand related #defines show the register layouts.Quoted 5 lines
If not (and I've never seen one using 5.15 kernels for 4 years), can we reprogram LTR_L1.2_THRESHOLDs at runtime? Like for the CPU, introduce 'performance' and 'powersave' governors for the PCI, which set the thresholds to, say, 2x and 0.5x (2 + 4 +
t_common_mode+t_power_on), respectively.Quoted 52 lines
I don't think I would support a sysfs or similar interface to tweak this. Right now computing LTR_L1.2_THRESHOLD already feels like a bit of black magic, and tweaking it would be farther down the road of "well, it seems to help this situation, but we don't really know why."
Quoted 47 lines · Bjorn Helgaas
Quoted 46 lines · Sergey Dolgov
Quoted 3 lines
Dear Bjorn,
here are both dmesg from the kernels with your info patch.
Thanks again! Here's the difference:
- pre
7afeb84d14ea
+ post7afeb84d14eapci 0000:02:00.0: parent CMRT 0x28 child CMRT 0x00 pci 0000:02:00.0: parent T_POWER_ON 0x2c usec (val 0x16 scale 0) pci 0000:02:00.0: child T_POWER_ON 0x0a usec (val 0x5 scale 0) pci 0000:02:00.0: t_common_mode 0x28 t_power_on 0x2c l1_2_threshold
0x5a
-pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x02scale 3 +pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x58scale 2We computed LTR_L1.2_THRESHOLD ==
0x5a== 90 usec == 90000 nsec.Prior to
7afeb84d14ea, we computed *scale = 3, *value = (90000 >> 15) ==0x2. But per PCIe r6.0, sec 6.18, this is a latency value of only0x2* 32768 == 65536 ns, which is less than the 90000 ns we requested.After
7afeb84d14ea, we computed *scale = 2, *value =roundup(threshold_ns, 1024)/ 1024 ==0x58, which is a latency value of 90112 ns, which is almost exactly what we requested.In essence, before
7afeb84d14eawe tell the Root Port that it can enter L1.2 and get back to L0 in 65536 ns or less, and after7afeb84d14ea, we tell it that it may take up to 90112 ns.It's possible that the calculation of LTR_L1.2_THRESHOLD itself in
aspm_calc_l12_info()is too conservative, and we don't actually need 90 usec, but I think the encoding done by7afeb84d14eaitself is more correct. I don't have any information about how to improve 90 usec estimate. (If you happen to have Windows on that box, it would be really interesting to see how it sets LTR_L1.2_THRESHOLD.)If the device has sent LTR messages indicating a latency requirement between 65536 ns and 90112 ns, the pre-7afeb84d14ea kernel would allow L1.2 while post
7afeb84d14eawould not. I don't think we can actually see the LTR messages sent by the device, but my guess is they must be in that range. I don't know if that's enough to account for the major difference in power consumption you're seeing.If the Root Port is attached to a controller in the South Complex — which would be the case on a Cannon Lake–based platform — you can observe the resulting LTR value sent from the Port using the
pmc_coredriver:cat
/sys/kernel/debug/pmc_core/ltr_show| grep SOUTHPORTNeeds
CONFIG_INTEL_PMC_COREwhich the major distros set.The SOUTHPORTs correspond to Root Ports. Unfortunately, we don’t currently have a mapping between the internal PMC
SOUTHPORT_Xdesignation and the PCI Bus enumeration. However, since this behavior clearly affects C-state entry, you should be able to narrow it down by monitoring this file — ideally capturing several snapshots, as the values can change depending on device activity.Note that the value shown may not exactly match what was sent in the LTR message, but it won’t be smaller. My current assumption (pending confirmation) is that simply entering L1.2 increases the effective LTR value observed by the CPU, since it’s unlikely that the LTR message value itself changes solely as a result of modifying the threshold.
Incidentally, you can also ignore the LTR from the Port by writing the bit value (first column) to the
ltr_ignorefile in the same folder. This is for testing only as it ignores device activity. But you should see deeper C state residency after ignoring the problem Port, which would be a way to narrow down the SOUTHPORT as well. The LTR consideration can be restored by writing the same bit value to theltr_restorefile.David
Quoted 17 lines
Quoted 15 lines
Quoted 15 lines
The AX200 at 6f:00.0 is in exactly the same situation as the Thunderbolt bridge at 02:00.0 (LTR_L1.2_THRESHOLD 90 usec, RP set to 65536 ns before
7afeb84d14eaand 90112 ns after).For the NVMe devices at 6d:00.0 and 6e:00.0, LTR_L1.2_THRESHOLD is 3206 usec (!), and we set the RP to 3145728 ns (slightly too small) before, 3211264 ns after.
For the RTS525A at 70:00.0, LTR_L1.2_THRESHOLD is 126 usec, and we set the RP to 98304 ns before, 126976 ns after.
Sorry, no real answers here yet, still puzzled.
Bjorn
[+cc Alex]
Quoted 7 lines · Sergey Dolgov
Dear Bjorn,
so, any interest in sending your patch upstream? Have you tested it on other devices? I have no other laptops I can boot Linux on, but I have upgraded the SSD a month ago, and the new one works fine without errors in SMART or DevSta at width x4 (max at my PCIe 3.0 port) with the same LTR1.2_Threshold of 81920ns.
I definitely want to pursue this in some form. My first thought is to just leave L1.2 config untouched because despite my hand-waving in 80d7d7a904fa ("PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics"), I'm unconvinced that Linux has enough information to configure L1.2 correctly.
I raised this in the PCI-SIG firmware working group yesterday and there was some feeling that we actually *do* know enough (with the help of an LTR _DSM), so maybe it's just that I don't understand it well enough.
Alex recently reported an ASPM issue, and I point him at the debug patch but haven't had a chance to look at his results yet:
https://lore.kernel.org/r/20250705134201.GA2004436@bhelgaas
Possibly completely unrelated.
Bjorn
Quoted 328 lines · Sergey Dolgov
Quoted 327 lines
Dear David,
I've seen only the following SOUTHPORT LTR values in different combinations depending on device activity:
######## No disk activity but varying workload otherwise (idle CPU, NVIDIA GPU sleeping or not, glxgears on either Intel or NVIDIA GPU, audio playback or not): LTR values fluctuate between
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0and
0 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
SOUTHPORT_Dis probably connected to the wifi:######## ping -A
ip route list default | awk '{print $3}': LTR values are constant at
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x90039003Non-Snoop(ns): 3145728 Snoop(ns): 3145728 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0In contrast, with RFKILL'd wifi and bluetooth
SOUTHPORT_DLTRs are all 0.
SOUTHPORT_Cis probably connected to the NVMes:######## du -ch /
0 PMC0:SOUTHPORT_A LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x88468846Non-Snoop(ns): 71680 Snoop(ns): 71680
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 00 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x880a880aNon-Snoop(ns): 10240 Snoop(ns): 10240 LTR_IGNORE: 0 12 PMC0:SOUTHPORT_D LTR: RAW: 0x88b688b6 Non-Snoop(ns): 186368 Snoop(ns): 186368
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 00 PMC0:SOUTHPORT_A LTR: RAW:
0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
1 PMC0:SOUTHPORT_B LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
8 PMC0:SOUTHPORT_C LTR: RAW:0x880a880aNon-Snoop(ns): 10240 Snoop(ns): 10240
LTR_IGNORE: 0
12 PMC0:SOUTHPORT_D LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0
13 PMC0:SOUTHPORT_E LTR: RAW:0x0
Non-Snoop(ns): 0 Snoop(ns): 0
LTR_IGNORE: 0These values are independent of the kernel (original 6.14.0 or that with Bjorn's patch skipping L1.2 config).
Thanks.
Sergey.Quoted 200 lines · David E. Box
Hi all,
Quoted 96 lines · Bjorn Helgaas
Quoted 7 lines · Sergey Dolgov
Dear Bjorn,
one (probably the main) power user is the CPU at shallow C states post
7afeb84d14ea. Even at some load (like web browsing) the CPU spends most time in C7 after reverting7afeb84d14ea, in contrast to C3 even at idle in the original 6.14.0. So the main question is what can make the CPU busy with larger LTR_L1.2_THRESHOLDs?That's a good question and I have no idea what the answer is. Obviously a larger LTR_L1.2_THRESHOLD means less time in L1.2, but I don't know how that translates to CPU C states.
These bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=218394
https://bugzilla.kernel.org/show_bug.cgi?id=215832mention C states and ASPM. I added some of those folks to cc.
Quoted 7 lines
I do have Win10 too, but neither Win binaries of pciutils nor Device Manager show LTR_L1.2_THRESHOLD. lspci -vv run as Administrator does report some "latencies" though. Some of them are significantly smaller, e.g. "Exit Latency L0s <1us, L1 <16us" for the bridge 00:1d.6, others are significantly larger, e.g. "Exit Latency L1 unlimited" for the NVMe 6e:00.0, than the LTR_L1.2_THRESHOLDs calculated by Linux. The full log is attached.
I think I'm missing your point here. The L0s/L1 Acceptable Latencies and the L0s/L1 Exit Latencies I see in your Win10 lspci are the same as in Windows, which is what I would expect because these are read-only Device and Link Capability registers and the OS can't influence them:
00:1d.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port
#15
LnkCap: Port #15, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s
<1us, L1 <16us6e:00.0 Non-Volatile memory controller: Intel Corporation Optane NVME SSD
H10
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L1, Exit Latency L1 unlimitedThe DevCap L0s and L1 Acceptable Latencies are "the acceptable total latency that an Endpoint can withstand due to transition from L0s or L1 to L0. It is essentially an indirect measure of the Endpoint's internal buffering."
The LnkCap L0s and L1 Exit Latencies are the "time the Port requires to complete transitions from L0s or L1 to L0."
I don't know how to relate LTR_L1.2_THRESHOLD to L1. I do know that L0s and L1 were part of PCIe r2.1, but it wasn't until r3.1 that the L1.1 and L1.2 substates were added and L1 was renamed to L1.0. So I expect the L1 latencies to be used to enable L1.0 by itself, and I assume LTR and LTR_L1.2_THRESHOLD are used separately to further enable L1.2.
Quoted 4 lines
But do we need to care about precise values? At least we know now that
7afeb84d14eahas only increased the thresholds, slightly. What happens if they are underestimated? Can this lead to severe problems, e.g. data corruption on NVMes?IIUC, LTR messages are essentially a way for the device to say "I have enough local buffer space to hold X ns worth of traffic while I'm waiting for the link to return to L0."
Then we should only put the link in L1.2 if we can get to L1.2 and back to L0 in X ns or less, and LTR_L1.2_THRESHOLD is basically the minimum L0 -> L1.2 -> L0 time.
If we set LTR_L1.2_THRESHOLD lower than it should be, it seems like we're at risk of overrunning the device's local buffer. Maybe that's OK and the device needs to be able to tolerate that, but it does feel risky to me.
There's also the LTR Capability that "specifies the maximum latency a device is permitted to request. Software should set this to the platform's maximum supported latency or less." Evidently drivers can set this (only amdgpu does, AFAICS), but I have no idea how to use it.
I suppose setting it to something less than LTR_L1.2_THRESHOLD might cause L1.2 to be used more? This would be writable via setpci, and it looks like it can be updated any time. If you want to play with it, the value and scale are encoded the same way as
encode_l12_threshold(), andPCI_EXT_CAP_ID_LTRand related #defines show the register layouts.Quoted 5 lines
If not (and I've never seen one using 5.15 kernels for 4 years), can we reprogram LTR_L1.2_THRESHOLDs at runtime? Like for the CPU, introduce 'performance' and 'powersave' governors for the PCI, which set the thresholds to, say, 2x and 0.5x (2 + 4 +
t_common_mode+t_power_on), respectively.Quoted 52 lines
I don't think I would support a sysfs or similar interface to tweak this. Right now computing LTR_L1.2_THRESHOLD already feels like a bit of black magic, and tweaking it would be farther down the road of "well, it seems to help this situation, but we don't really know why."
Quoted 47 lines · Bjorn Helgaas
Quoted 46 lines · Sergey Dolgov
Quoted 3 lines
Dear Bjorn,
here are both dmesg from the kernels with your info patch.
Thanks again! Here's the difference:
- pre
7afeb84d14ea
+ post7afeb84d14eapci 0000:02:00.0: parent CMRT 0x28 child CMRT 0x00 pci 0000:02:00.0: parent T_POWER_ON 0x2c usec (val 0x16 scale 0) pci 0000:02:00.0: child T_POWER_ON 0x0a usec (val 0x5 scale 0) pci 0000:02:00.0: t_common_mode 0x28 t_power_on 0x2c l1_2_threshold
0x5a
-pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x02scale 3 +pci 0000:02:00.0: encoded LTR_L1.2_THRESHOLD value0x58scale 2We computed LTR_L1.2_THRESHOLD ==
0x5a== 90 usec == 90000 nsec.Prior to
7afeb84d14ea, we computed *scale = 3, *value = (90000 >> 15) ==0x2. But per PCIe r6.0, sec 6.18, this is a latency value of only0x2* 32768 == 65536 ns, which is less than the 90000 ns we requested.After
7afeb84d14ea, we computed *scale = 2, *value =roundup(threshold_ns, 1024)/ 1024 ==0x58, which is a latency value of 90112 ns, which is almost exactly what we requested.In essence, before
7afeb84d14eawe tell the Root Port that it can enter L1.2 and get back to L0 in 65536 ns or less, and after7afeb84d14ea, we tell it that it may take up to 90112 ns.It's possible that the calculation of LTR_L1.2_THRESHOLD itself in
aspm_calc_l12_info()is too conservative, and we don't actually need 90 usec, but I think the encoding done by7afeb84d14eaitself is more correct. I don't have any information about how to improve 90 usec estimate. (If you happen to have Windows on that box, it would be really interesting to see how it sets LTR_L1.2_THRESHOLD.)If the device has sent LTR messages indicating a latency requirement between 65536 ns and 90112 ns, the pre-7afeb84d14ea kernel would allow L1.2 while post
7afeb84d14eawould not. I don't think we can actually see the LTR messages sent by the device, but my guess is they must be in that range. I don't know if that's enough to account for the major difference in power consumption you're seeing.If the Root Port is attached to a controller in the South Complex — which would be the case on a Cannon Lake–based platform — you can observe the resulting LTR value sent from the Port using the
pmc_coredriver:cat
/sys/kernel/debug/pmc_core/ltr_show| grep SOUTHPORTNeeds
CONFIG_INTEL_PMC_COREwhich the major distros set.The SOUTHPORTs correspond to Root Ports. Unfortunately, we don’t currently have a mapping between the internal PMC
SOUTHPORT_Xdesignation and the PCI Bus enumeration. However, since this behavior clearly affects C-state entry, you should be able to narrow it down by monitoring this file — ideally capturing several snapshots, as the values can change depending on device activity.Note that the value shown may not exactly match what was sent in the LTR message, but it won’t be smaller. My current assumption (pending confirmation) is that simply entering L1.2 increases the effective LTR value observed by the CPU, since it’s unlikely that the LTR message value itself changes solely as a result of modifying the threshold.
Incidentally, you can also ignore the LTR from the Port by writing the bit value (first column) to the
ltr_ignorefile in the same folder. This is for testing only as it ignores device activity. But you should see deeper C state residency after ignoring the problem Port, which would be a way to narrow down the SOUTHPORT as well. The LTR consideration can be restored by writing the same bit value to theltr_restorefile.David
Quoted 17 lines
Quoted 15 lines
Quoted 15 lines
The AX200 at 6f:00.0 is in exactly the same situation as the Thunderbolt bridge at 02:00.0 (LTR_L1.2_THRESHOLD 90 usec, RP set to 65536 ns before
7afeb84d14eaand 90112 ns after).For the NVMe devices at 6d:00.0 and 6e:00.0, LTR_L1.2_THRESHOLD is 3206 usec (!), and we set the RP to 3145728 ns (slightly too small) before, 3211264 ns after.
For the RTS525A at 70:00.0, LTR_L1.2_THRESHOLD is 126 usec, and we set the RP to 98304 ns before, 126976 ns after.
Sorry, no real answers here yet, still puzzled.
Bjorn