Skip to contentSkip to conversation

Use main as default branch name

PATCH Superseded Johannes Schindelin via GitGitGadget 11 participants 163 messages Nov 12, 2020 – Nov 23, 2020 1 message not in the archive Kbuild Page 2 of 6

lore
Share & tools
lore
#8 lore raw

PATCH 8/28 t4*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Carefully excluding t4013, which sees independent development elsewhere at the time of writing, we use main as the default branch name in t4*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t4*.sh t4211/*.export &&
	   git checkout HEAD -- t4013\*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t4014-format-patch.sh              | 176 +++++++++++++--------------
 t/t4015-diff-whitespace.sh           |   2 +-
 t/t4017-diff-retval.sh               |   2 +-
 t/t4038-diff-combined.sh             |  14 +--
 t/t4041-diff-submodule-option.sh     |   2 +-
 t/t4048-diff-combined-binary.sh      |  10 +-
 t/t4052-stat-output.sh               |   4 +-
 t/t4056-diff-order.sh                |   2 +-
 t/t4057-diff-combined-paths.sh       |  20 +--
 t/t4061-diff-indent.sh               |  24 ++--
 t/t4066-diff-emit-delay.sh           |   2 +-
 t/t4068-diff-symmetric-merge-base.sh |  48 ++++----
 t/t4103-apply-binary.sh              |  36 +++---
 t/t4108-apply-threeway.sh            |  14 +--
 t/t4121-apply-diffs.sh               |   2 +-
 t/t4122-apply-symlink-inside.sh      |   6 +-
 t/t4150-am.sh                        |  26 ++--
 t/t4200-rerere.sh                    |  20 +--
 t/t4201-shortlog.sh                  |   2 +-
 t/t4202-log.sh                       | 106 ++++++++--------
 t/t4203-mailmap.sh                   |   2 +-
 t/t4204-patch-id.sh                  |  26 ++--
 t/t4207-log-decoration-colors.sh     |   6 +-
 t/t4208-log-magic-pathspec.sh        |   4 +-
 t/t4211/history.export               |   2 +-
 t/t4214-log-graph-octopus.sh         |   2 +-
 t/t4216-log-bloom.sh                 |   4 +-
 t/t4253-am-keep-cr-dos.sh            |  20 +--
 t/t4257-am-interactive.sh            |   2 +-
 t/test-lib.sh                        |   4 +-
 30 files changed, 295 insertions(+), 295 deletions(-)
t/t4014-format-patch.sh +88 -88
index c5e5e0da3f..636d028b5d 100755
@@ -32,11 +32,11 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m "Side changes #3 with \\n backslash-n in it." &&
 
-	git checkout master &&
+	git checkout main &&
 	git diff-tree -p C2 >patch &&
 	git apply --index <patch &&
 	test_tick &&
-	git commit -m "Master accepts moral equivalent of #2" &&
+	git commit -m "Main accepts moral equivalent of #2" &&
 
 	git checkout side &&
 	git checkout -b patchid &&
@@ -56,39 +56,39 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m "patchid 3" &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'format-patch --ignore-if-in-upstream' '
-	git format-patch --stdout master..side >patch0 &&
+	git format-patch --stdout main..side >patch0 &&
 	grep "^From " patch0 >from0 &&
 	test_line_count = 3 from0
 '
 
 test_expect_success 'format-patch --ignore-if-in-upstream' '
 	git format-patch --stdout \
-		--ignore-if-in-upstream master..side >patch1 &&
+		--ignore-if-in-upstream main..side >patch1 &&
 	grep "^From " patch1 >from1 &&
 	test_line_count = 2 from1
 '
 
 test_expect_success 'format-patch --ignore-if-in-upstream handles tags' '
 	git tag -a v1 -m tag side &&
-	git tag -a v2 -m tag master &&
+	git tag -a v2 -m tag main &&
 	git format-patch --stdout --ignore-if-in-upstream v2..v1 >patch1 &&
 	grep "^From " patch1 >from1 &&
 	test_line_count = 2 from1
 '
 
 test_expect_success "format-patch doesn't consider merge commits" '
-	git checkout -b feature master &&
+	git checkout -b feature main &&
 	echo "Another line" >>file &&
 	test_tick &&
 	git commit -am "Feature branch change #1" &&
 	echo "Yet another line" >>file &&
 	test_tick &&
 	git commit -am "Feature branch change #2" &&
-	git checkout -b merger master &&
+	git checkout -b merger main &&
 	test_tick &&
 	git merge --no-ff feature &&
 	git format-patch -3 --stdout >patch &&
@@ -97,16 +97,16 @@ test_expect_success "format-patch doesn't consider merge commits" '
 '
 
 test_expect_success 'format-patch result applies' '
-	git checkout -b rebuild-0 master &&
+	git checkout -b rebuild-0 main &&
 	git am -3 patch0 &&
-	git rev-list master.. >list &&
+	git rev-list main.. >list &&
 	test_line_count = 2 list
 '
 
 test_expect_success 'format-patch --ignore-if-in-upstream result applies' '
-	git checkout -b rebuild-1 master &&
+	git checkout -b rebuild-1 main &&
 	git am -3 patch1 &&
-	git rev-list master.. >list &&
+	git rev-list main.. >list &&
 	test_line_count = 2 list
 '
 
@@ -130,7 +130,7 @@ test_expect_success 'extra headers' '
 " &&
 	git config --add format.headers "Cc: S E Cipient <[email protected]>
 " &&
-	git format-patch --stdout master..side >patch2 &&
+	git format-patch --stdout main..side >patch2 &&
 	sed -e "/^\$/q" patch2 >hdrs2 &&
 	grep "^To: R E Cipient <[email protected]>\$" hdrs2 &&
 	grep "^Cc: S E Cipient <[email protected]>\$" hdrs2
@@ -139,7 +139,7 @@ test_expect_success 'extra headers' '
 test_expect_success 'extra headers without newlines' '
 	git config --replace-all format.headers "To: R E Cipient <[email protected]>" &&
 	git config --add format.headers "Cc: S E Cipient <[email protected]>" &&
-	git format-patch --stdout master..side >patch3 &&
+	git format-patch --stdout main..side >patch3 &&
 	sed -e "/^\$/q" patch3 >hdrs3 &&
 	grep "^To: R E Cipient <[email protected]>\$" hdrs3 &&
 	grep "^Cc: S E Cipient <[email protected]>\$" hdrs3
@@ -148,7 +148,7 @@ test_expect_success 'extra headers without newlines' '
 test_expect_success 'extra headers with multiple To:s' '
 	git config --replace-all format.headers "To: R E Cipient <[email protected]>" &&
 	git config --add format.headers "To: S E Cipient <[email protected]>" &&
-	git format-patch --stdout master..side >patch4 &&
+	git format-patch --stdout main..side >patch4 &&
 	sed -e "/^\$/q" patch4 >hdrs4 &&
 	grep "^To: R E Cipient <[email protected]>,\$" hdrs4 &&
 	grep "^ *S E Cipient <[email protected]>\$" hdrs4
@@ -156,7 +156,7 @@ test_expect_success 'extra headers with multiple To:s' '
 
 test_expect_success 'additional command line cc (ascii)' '
 	git config --replace-all format.headers "Cc: R E Cipient <[email protected]>" &&
-	git format-patch --cc="S E Cipient <[email protected]>" --stdout master..side >patch5 &&
+	git format-patch --cc="S E Cipient <[email protected]>" --stdout main..side >patch5 &&
 	sed -e "/^\$/q" patch5 >hdrs5 &&
 	grep "^Cc: R E Cipient <[email protected]>,\$" hdrs5 &&
 	grep "^ *S E Cipient <[email protected]>\$" hdrs5
@@ -164,7 +164,7 @@ test_expect_success 'additional command line cc (ascii)' '
 
 test_expect_failure 'additional command line cc (rfc822)' '
 	git config --replace-all format.headers "Cc: R E Cipient <[email protected]>" &&
-	git format-patch --cc="S. E. Cipient <[email protected]>" --stdout master..side >patch5 &&
+	git format-patch --cc="S. E. Cipient <[email protected]>" --stdout main..side >patch5 &&
 	sed -e "/^\$/q" patch5 >hdrs5 &&
 	grep "^Cc: R E Cipient <[email protected]>,\$" hdrs5 &&
 	grep "^ *\"S. E. Cipient\" <[email protected]>\$" hdrs5
@@ -172,14 +172,14 @@ test_expect_failure 'additional command line cc (rfc822)' '
 
 test_expect_success 'command line headers' '
 	git config --unset-all format.headers &&
-	git format-patch --add-header="Cc: R E Cipient <[email protected]>" --stdout master..side >patch6 &&
+	git format-patch --add-header="Cc: R E Cipient <[email protected]>" --stdout main..side >patch6 &&
 	sed -e "/^\$/q" patch6 >hdrs6 &&
 	grep "^Cc: R E Cipient <[email protected]>\$" hdrs6
 '
 
 test_expect_success 'configuration headers and command line headers' '
 	git config --replace-all format.headers "Cc: R E Cipient <[email protected]>" &&
-	git format-patch --add-header="Cc: S E Cipient <[email protected]>" --stdout master..side >patch7 &&
+	git format-patch --add-header="Cc: S E Cipient <[email protected]>" --stdout main..side >patch7 &&
 	sed -e "/^\$/q" patch7 >hdrs7 &&
 	grep "^Cc: R E Cipient <[email protected]>,\$" hdrs7 &&
 	grep "^ *S E Cipient <[email protected]>\$" hdrs7
@@ -187,40 +187,40 @@ test_expect_success 'configuration headers and command line headers' '
 
 test_expect_success 'command line To: header (ascii)' '
 	git config --unset-all format.headers &&
-	git format-patch --to="R E Cipient <[email protected]>" --stdout master..side >patch8 &&
+	git format-patch --to="R E Cipient <[email protected]>" --stdout main..side >patch8 &&
 	sed -e "/^\$/q" patch8 >hdrs8 &&
 	grep "^To: R E Cipient <[email protected]>\$" hdrs8
 '
 
 test_expect_failure 'command line To: header (rfc822)' '
-	git format-patch --to="R. E. Cipient <[email protected]>" --stdout master..side >patch8 &&
+	git format-patch --to="R. E. Cipient <[email protected]>" --stdout main..side >patch8 &&
 	sed -e "/^\$/q" patch8 >hdrs8 &&
 	grep "^To: \"R. E. Cipient\" <[email protected]>\$" hdrs8
 '
 
 test_expect_failure 'command line To: header (rfc2047)' '
-	git format-patch --to="R Ä Cipient <[email protected]>" --stdout master..side >patch8 &&
+	git format-patch --to="R Ä Cipient <[email protected]>" --stdout main..side >patch8 &&
 	sed -e "/^\$/q" patch8 >hdrs8 &&
 	grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <[email protected]>\$" hdrs8
 '
 
 test_expect_success 'configuration To: header (ascii)' '
 	git config format.to "R E Cipient <[email protected]>" &&
-	git format-patch --stdout master..side >patch9 &&
+	git format-patch --stdout main..side >patch9 &&
 	sed -e "/^\$/q" patch9 >hdrs9 &&
 	grep "^To: R E Cipient <[email protected]>\$" hdrs9
 '
 
 test_expect_failure 'configuration To: header (rfc822)' '
 	git config format.to "R. E. Cipient <[email protected]>" &&
-	git format-patch --stdout master..side >patch9 &&
+	git format-patch --stdout main..side >patch9 &&
 	sed -e "/^\$/q" patch9 >hdrs9 &&
 	grep "^To: \"R. E. Cipient\" <[email protected]>\$" hdrs9
 '
 
 test_expect_failure 'configuration To: header (rfc2047)' '
 	git config format.to "R Ä Cipient <[email protected]>" &&
-	git format-patch --stdout master..side >patch9 &&
+	git format-patch --stdout main..side >patch9 &&
 	sed -e "/^\$/q" patch9 >hdrs9 &&
 	grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <[email protected]>\$" hdrs9
 '
@@ -234,35 +234,35 @@ check_patch () {
 }
 
 test_expect_success 'format.from=false' '
-	git -c format.from=false format-patch --stdout master..side >patch &&
+	git -c format.from=false format-patch --stdout main..side >patch &&
 	sed -e "/^\$/q" patch >hdrs &&
 	check_patch patch &&
 	! grep "^From: C O Mitter <[email protected]>\$" hdrs
 '
 
 test_expect_success 'format.from=true' '
-	git -c format.from=true format-patch --stdout master..side >patch &&
+	git -c format.from=true format-patch --stdout main..side >patch &&
 	sed -e "/^\$/q" patch >hdrs &&
 	check_patch hdrs &&
 	grep "^From: C O Mitter <[email protected]>\$" hdrs
 '
 
 test_expect_success 'format.from with address' '
-	git -c format.from="F R Om <[email protected]>" format-patch --stdout master..side >patch &&
+	git -c format.from="F R Om <[email protected]>" format-patch --stdout main..side >patch &&
 	sed -e "/^\$/q" patch >hdrs &&
 	check_patch hdrs &&
 	grep "^From: F R Om <[email protected]>\$" hdrs
 '
 
 test_expect_success '--no-from overrides format.from' '
-	git -c format.from="F R Om <[email protected]>" format-patch --no-from --stdout master..side >patch &&
+	git -c format.from="F R Om <[email protected]>" format-patch --no-from --stdout main..side >patch &&
 	sed -e "/^\$/q" patch >hdrs &&
 	check_patch hdrs &&
 	! grep "^From: F R Om <[email protected]>\$" hdrs
 '
 
 test_expect_success '--from overrides format.from' '
-	git -c format.from="F R Om <[email protected]>" format-patch --from --stdout master..side >patch &&
+	git -c format.from="F R Om <[email protected]>" format-patch --from --stdout main..side >patch &&
 	sed -e "/^\$/q" patch >hdrs &&
 	check_patch hdrs &&
 	! grep "^From: F R Om <[email protected]>\$" hdrs
@@ -271,7 +271,7 @@ test_expect_success '--from overrides format.from' '
 test_expect_success '--no-to overrides config.to' '
 	git config --replace-all format.to \
 		"R E Cipient <[email protected]>" &&
-	git format-patch --no-to --stdout master..side >patch10 &&
+	git format-patch --no-to --stdout main..side >patch10 &&
 	sed -e "/^\$/q" patch10 >hdrs10 &&
 	check_patch hdrs10 &&
 	! grep "^To: R E Cipient <[email protected]>\$" hdrs10
@@ -281,7 +281,7 @@ test_expect_success '--no-to and --to replaces config.to' '
 	git config --replace-all format.to \
 		"Someone <[email protected]>" &&
 	git format-patch --no-to --to="Someone Else <[email protected]>" \
-		--stdout master..side >patch11 &&
+		--stdout main..side >patch11 &&
 	sed -e "/^\$/q" patch11 >hdrs11 &&
 	check_patch hdrs11 &&
 	! grep "^To: Someone <[email protected]>\$" hdrs11 &&
@@ -291,7 +291,7 @@ test_expect_success '--no-to and --to replaces config.to' '
 test_expect_success '--no-cc overrides config.cc' '
 	git config --replace-all format.cc \
 		"C E Cipient <[email protected]>" &&
-	git format-patch --no-cc --stdout master..side >patch12 &&
+	git format-patch --no-cc --stdout main..side >patch12 &&
 	sed -e "/^\$/q" patch12 >hdrs12 &&
 	check_patch hdrs12 &&
 	! grep "^Cc: C E Cipient <[email protected]>\$" hdrs12
@@ -300,7 +300,7 @@ test_expect_success '--no-cc overrides config.cc' '
 test_expect_success '--no-add-header overrides config.headers' '
 	git config --replace-all format.headers \
 		"Header1: B E Cipient <[email protected]>" &&
-	git format-patch --no-add-header --stdout master..side >patch13 &&
+	git format-patch --no-add-header --stdout main..side >patch13 &&
 	sed -e "/^\$/q" patch13 >hdrs13 &&
 	check_patch hdrs13 &&
 	! grep "^Header1: B E Cipient <[email protected]>\$" hdrs13
@@ -309,7 +309,7 @@ test_expect_success '--no-add-header overrides config.headers' '
 test_expect_success 'multiple files' '
 	rm -rf patches/ &&
 	git checkout side &&
-	git format-patch -o patches/ master &&
+	git format-patch -o patches/ main &&
 	ls patches/0001-Side-changes-1.patch patches/0002-Side-changes-2.patch patches/0003-Side-changes-3-with-n-backslash-n-in-it.patch
 '
 
@@ -369,7 +369,7 @@ test_expect_success 'filename limit applies only to basename' '
 
 test_expect_success 'reroll count' '
 	rm -fr patches &&
-	git format-patch -o patches --cover-letter --reroll-count 4 master..side >list &&
+	git format-patch -o patches --cover-letter --reroll-count 4 main..side >list &&
 	! grep -v "^patches/v4-000[0-3]-" list &&
 	sed -n -e "/^Subject: /p" $(cat list) >subjects &&
 	! grep -v "^Subject: \[PATCH v4 [0-3]/3\] " subjects
@@ -377,7 +377,7 @@ test_expect_success 'reroll count' '
 
 test_expect_success 'reroll count (-v)' '
 	rm -fr patches &&
-	git format-patch -o patches --cover-letter -v4 master..side >list &&
+	git format-patch -o patches --cover-letter -v4 main..side >list &&
 	! grep -v "^patches/v4-000[0-3]-" list &&
 	sed -n -e "/^Subject: /p" $(cat list) >subjects &&
 	! grep -v "^Subject: \[PATCH v4 [0-3]/3\] " subjects
@@ -413,7 +413,7 @@ EOF
 
 test_expect_success 'no threading' '
 	git checkout side &&
-	check_threading expect.no-threading master
+	check_threading expect.no-threading main
 '
 
 cat >expect.thread <<EOF
@@ -430,7 +430,7 @@ References: <0>
 EOF
 
 test_expect_success 'thread' '
-	check_threading expect.thread --thread master
+	check_threading expect.thread --thread main
 '
 
 cat >expect.in-reply-to <<EOF
@@ -450,7 +450,7 @@ EOF
 
 test_expect_success 'thread in-reply-to' '
 	check_threading expect.in-reply-to --in-reply-to="<test.message>" \
-		--thread master
+		--thread main
 '
 
 cat >expect.cover-letter <<EOF
@@ -471,7 +471,7 @@ References: <0>
 EOF
 
 test_expect_success 'thread cover-letter' '
-	check_threading expect.cover-letter --cover-letter --thread master
+	check_threading expect.cover-letter --cover-letter --thread main
 '
 
 cat >expect.cl-irt <<EOF
@@ -498,12 +498,12 @@ EOF
 
 test_expect_success 'thread cover-letter in-reply-to' '
 	check_threading expect.cl-irt --cover-letter \
-		--in-reply-to="<test.message>" --thread master
+		--in-reply-to="<test.message>" --thread main
 '
 
 test_expect_success 'thread explicit shallow' '
 	check_threading expect.cl-irt --cover-letter \
-		--in-reply-to="<test.message>" --thread=shallow master
+		--in-reply-to="<test.message>" --thread=shallow main
 '
 
 cat >expect.deep <<EOF
@@ -521,7 +521,7 @@ References: <0>
 EOF
 
 test_expect_success 'thread deep' '
-	check_threading expect.deep --thread=deep master
+	check_threading expect.deep --thread=deep main
 '
 
 cat >expect.deep-irt <<EOF
@@ -544,7 +544,7 @@ EOF
 
 test_expect_success 'thread deep in-reply-to' '
 	check_threading expect.deep-irt  --thread=deep \
-		--in-reply-to="<test.message>" master
+		--in-reply-to="<test.message>" main
 '
 
 cat >expect.deep-cl <<EOF
@@ -568,7 +568,7 @@ References: <0>
 EOF
 
 test_expect_success 'thread deep cover-letter' '
-	check_threading expect.deep-cl --cover-letter --thread=deep master
+	check_threading expect.deep-cl --cover-letter --thread=deep main
 '
 
 cat >expect.deep-cl-irt <<EOF
@@ -598,27 +598,27 @@ EOF
 
 test_expect_success 'thread deep cover-letter in-reply-to' '
 	check_threading expect.deep-cl-irt --cover-letter \
-		--in-reply-to="<test.message>" --thread=deep master
+		--in-reply-to="<test.message>" --thread=deep main
 '
 
 test_expect_success 'thread via config' '
 	test_config format.thread true &&
-	check_threading expect.thread master
+	check_threading expect.thread main
 '
 
 test_expect_success 'thread deep via config' '
 	test_config format.thread deep &&
-	check_threading expect.deep master
+	check_threading expect.deep main
 '
 
 test_expect_success 'thread config + override' '
 	test_config format.thread deep &&
-	check_threading expect.thread --thread master
+	check_threading expect.thread --thread main
 '
 
 test_expect_success 'thread config + --no-thread' '
 	test_config format.thread deep &&
-	check_threading expect.no-threading --no-thread master
+	check_threading expect.no-threading --no-thread main
 '
 
 test_expect_success 'excessive subject' '
@@ -631,7 +631,7 @@ test_expect_success 'excessive subject' '
 	after=$(git rev-parse --short $after) &&
 	git update-index file &&
 	git commit -m "This is an excessively long subject line for a message due to the habit some projects have of not having a short, one-line subject at the start of the commit message, but rather sticking a whole paragraph right at the start as the only thing in the commit message. It had better not become the filename for the patch." &&
-	git format-patch -o patches/ master..side &&
+	git format-patch -o patches/ main..side &&
 	ls patches/0004-This-is-an-excessively-long-subject-line-for-a-messa.patch
 '
 
@@ -893,13 +893,13 @@ test_expect_success 'options no longer allowed for format-patch' '
 '
 
 test_expect_success 'format-patch --numstat should produce a patch' '
-	git format-patch --numstat --stdout master..side >output &&
+	git format-patch --numstat --stdout main..side >output &&
 	grep "^diff --git a/" output >diff &&
 	test_line_count = 5 diff
 '
 
 test_expect_success 'format-patch -- <path>' '
-	git format-patch master..side -- file 2>error &&
+	git format-patch main..side -- file 2>error &&
 	! grep "Use .--" error
 '
 
@@ -1673,9 +1673,9 @@ test_expect_success 'cover letter with invalid --cover-from-description and conf
 	test_config branch.rebuild-1.description "config subject
 
 body" &&
-	test_must_fail git format-patch --cover-letter --cover-from-description garbage master &&
+	test_must_fail git format-patch --cover-letter --cover-from-description garbage main &&
 	test_config format.coverFromDescription garbage &&
-	test_must_fail git format-patch --cover-letter master
+	test_must_fail git format-patch --cover-letter main
 '
 
 test_expect_success 'cover letter with format.coverFromDescription = default' '
@@ -1684,7 +1684,7 @@ test_expect_success 'cover letter with format.coverFromDescription = default' '
 body" &&
 	test_config format.coverFromDescription default &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^config subject$" actual &&
@@ -1696,7 +1696,7 @@ test_expect_success 'cover letter with --cover-from-description default' '
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description default master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description default main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^config subject$" actual &&
@@ -1709,7 +1709,7 @@ test_expect_success 'cover letter with format.coverFromDescription = none' '
 body" &&
 	test_config format.coverFromDescription none &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1721,7 +1721,7 @@ test_expect_success 'cover letter with --cover-from-description none' '
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description none master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description none main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1734,7 +1734,7 @@ test_expect_success 'cover letter with format.coverFromDescription = message' '
 body" &&
 	test_config format.coverFromDescription message &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^config subject$" actual &&
@@ -1746,7 +1746,7 @@ test_expect_success 'cover letter with --cover-from-description message' '
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description message master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description message main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^config subject$" actual &&
@@ -1759,7 +1759,7 @@ test_expect_success 'cover letter with format.coverFromDescription = subject' '
 body" &&
 	test_config format.coverFromDescription subject &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] config subject$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1771,7 +1771,7 @@ test_expect_success 'cover letter with --cover-from-description subject' '
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description subject master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description subject main >actual &&
 	grep "^Subject: \[PATCH 0/2\] config subject$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1784,7 +1784,7 @@ test_expect_success 'cover letter with format.coverFromDescription = auto (short
 body" &&
 	test_config format.coverFromDescription auto &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] config subject$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1796,7 +1796,7 @@ test_expect_success 'cover letter with --cover-from-description auto (short subj
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description auto master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description auto main >actual &&
 	grep "^Subject: \[PATCH 0/2\] config subject$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1809,7 +1809,7 @@ test_expect_success 'cover letter with format.coverFromDescription = auto (long
 body" &&
 	test_config format.coverFromDescription auto &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual &&
@@ -1821,7 +1821,7 @@ test_expect_success 'cover letter with --cover-from-description auto (long subje
 
 body" &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description auto master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description auto main >actual &&
 	grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual &&
@@ -1834,7 +1834,7 @@ test_expect_success 'cover letter with command-line --cover-from-description ove
 body" &&
 	test_config format.coverFromDescription none &&
 	git checkout rebuild-1 &&
-	git format-patch --stdout --cover-letter --cover-from-description subject master >actual &&
+	git format-patch --stdout --cover-letter --cover-from-description subject main >actual &&
 	grep "^Subject: \[PATCH 0/2\] config subject$" actual &&
 	! grep "^\*\*\* BLURB HERE \*\*\*$" actual &&
 	! grep "^config subject$" actual &&
@@ -1844,7 +1844,7 @@ body" &&
 test_expect_success 'cover letter using branch description (1)' '
 	git checkout rebuild-1 &&
 	test_config branch.rebuild-1.description hello &&
-	git format-patch --stdout --cover-letter master >actual &&
+	git format-patch --stdout --cover-letter main >actual &&
 	grep hello actual
 '
 
@@ -1858,14 +1858,14 @@ test_expect_success 'cover letter using branch description (2)' '
 test_expect_success 'cover letter using branch description (3)' '
 	git checkout rebuild-1 &&
 	test_config branch.rebuild-1.description hello &&
-	git format-patch --stdout --cover-letter ^master rebuild-1 >actual &&
+	git format-patch --stdout --cover-letter ^main rebuild-1 >actual &&
 	grep hello actual
 '
 
 test_expect_success 'cover letter using branch description (4)' '
 	git checkout rebuild-1 &&
 	test_config branch.rebuild-1.description hello &&
-	git format-patch --stdout --cover-letter master.. >actual &&
+	git format-patch --stdout --cover-letter main.. >actual &&
 	grep hello actual
 '
 
@@ -1932,8 +1932,8 @@ test_expect_success 'From line has expected format' '
 
 test_expect_success 'format-patch -o with no leading directories' '
 	rm -fr patches &&
-	git format-patch -o patches master..side &&
-	count=$(git rev-list --count master..side) &&
+	git format-patch -o patches main..side &&
+	count=$(git rev-list --count main..side) &&
 	ls patches >list &&
 	test_line_count = $count list
 '
@@ -1941,16 +1941,16 @@ test_expect_success 'format-patch -o with no leading directories' '
 test_expect_success 'format-patch -o with leading existing directories' '
 	rm -rf existing-dir &&
 	mkdir existing-dir &&
-	git format-patch -o existing-dir/patches master..side &&
-	count=$(git rev-list --count master..side) &&
+	git format-patch -o existing-dir/patches main..side &&
+	count=$(git rev-list --count main..side) &&
 	ls existing-dir/patches >list &&
 	test_line_count = $count list
 '
 
 test_expect_success 'format-patch -o with leading non-existing directories' '
 	rm -rf non-existing-dir &&
-	git format-patch -o non-existing-dir/patches master..side &&
-	count=$(git rev-list --count master..side) &&
+	git format-patch -o non-existing-dir/patches main..side &&
+	count=$(git rev-list --count main..side) &&
 	test_path_is_dir non-existing-dir &&
 	ls non-existing-dir/patches >list &&
 	test_line_count = $count list
@@ -1959,8 +1959,8 @@ test_expect_success 'format-patch -o with leading non-existing directories' '
 test_expect_success 'format-patch format.outputDirectory option' '
 	test_config format.outputDirectory patches &&
 	rm -fr patches &&
-	git format-patch master..side &&
-	count=$(git rev-list --count master..side) &&
+	git format-patch main..side &&
+	count=$(git rev-list --count main..side) &&
 	ls patches >list &&
 	test_line_count = $count list
 '
@@ -1968,7 +1968,7 @@ test_expect_success 'format-patch format.outputDirectory option' '
 test_expect_success 'format-patch -o overrides format.outputDirectory' '
 	test_config format.outputDirectory patches &&
 	rm -fr patches patchset &&
-	git format-patch master..side -o patchset &&
+	git format-patch main..side -o patchset &&
 	test_path_is_missing patches &&
 	test_path_is_dir patchset
 '
@@ -2065,14 +2065,14 @@ test_expect_success 'format-patch --base errors out when base commit is not ance
 	#	  ------------W
 	#
 	# If "format-patch Z..X" is given, P and Z can not be specified as the base commit
-	git checkout -b topic1 master &&
+	git checkout -b topic1 main &&
 	git rev-parse HEAD >commit-id-base &&
 	test_commit P &&
 	git rev-parse HEAD >commit-id-P &&
 	test_commit Z &&
 	git rev-parse HEAD >commit-id-Z &&
 	test_commit Y &&
-	git checkout -b topic2 master &&
+	git checkout -b topic2 main &&
 	test_commit W &&
 	git merge topic1 &&
 	test_commit X &&
@@ -2085,7 +2085,7 @@ test_expect_success 'format-patch --base errors out when base commit is not ance
 '
 
 test_expect_success 'format-patch --base=auto' '
-	git checkout -b upstream master &&
+	git checkout -b upstream main &&
 	git checkout -b local upstream &&
 	git branch --set-upstream-to=upstream &&
 	test_commit N1 &&
@@ -2106,11 +2106,11 @@ test_expect_success 'format-patch errors out when history involves criss-cross'
 	#  \ / \
 	#   C---M2---E
 	#
-	git checkout master &&
+	git checkout main &&
 	test_commit A &&
-	git checkout -b xb master &&
+	git checkout -b xb main &&
 	test_commit B &&
-	git checkout -b xc master &&
+	git checkout -b xc main &&
 	test_commit C &&
 	git checkout -b xbc xb -- &&
 	git merge xc &&
@@ -2230,7 +2230,7 @@ test_expect_success 'format-patch --pretty=mboxrd' '
 '
 
 test_expect_success 'interdiff: setup' '
-	git checkout -b boop master &&
+	git checkout -b boop main &&
 	test_commit fnorp blorp &&
 	test_commit fleep blorp
 '
t/t4015-diff-whitespace.sh +1 -1
index 8bdaa0a693..899fad379e 100755
@@ -883,7 +883,7 @@ test_expect_success 'combined diff with autocrlf conversion' '
 	echo >x goodbye &&
 	git commit -m "the other side" x &&
 	git config core.autocrlf true &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 
 	git diff >actual.raw &&
 	sed -e "1,/^@@@/d" actual.raw >actual &&
t/t4017-diff-retval.sh +1 -1
index 95a7ca7070..484d847749 100755
@@ -111,7 +111,7 @@ test_expect_success 'check detects leftover conflict markers' '
 	git checkout HEAD^ &&
 	echo binary >>b &&
 	git commit -m "side" b &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	git add b &&
 	test_expect_code 2 git --no-pager diff --cached --check >test.out &&
 	test 3 = $(grep "conflict marker" test.out | wc -l) &&
t/t4038-diff-combined.sh +7 -7
index 94680836ce..5eb36907c1 100755
@@ -115,7 +115,7 @@ test_expect_success 'check --cc --raw with forty trees' '
 '
 
 test_expect_success 'setup combined ignore spaces' '
-	git checkout master &&
+	git checkout main &&
 	>test &&
 	git add test &&
 	git commit -m initial &&
@@ -143,7 +143,7 @@ test_expect_success 'setup combined ignore spaces' '
 	EOF
 	git commit -m "test other space changes" -a &&
 
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	tr -d Q <<-\EOF >test &&
 	eol spaces Q
 	space  change
@@ -404,7 +404,7 @@ test_expect_success 'combine diff missing delete bug' '
 test_expect_success 'combine diff gets tree sorting right' '
 	# create a directory and a file that sort differently in trees
 	# versus byte-wise (implied "/" sorts after ".")
-	git checkout -f master &&
+	git checkout -f main &&
 	mkdir foo &&
 	echo base >foo/one &&
 	echo base >foo/two &&
@@ -414,9 +414,9 @@ test_expect_success 'combine diff gets tree sorting right' '
 
 	# one side modifies a file in the directory, along with the root
 	# file...
-	echo master >foo/one &&
-	echo master >foo.ext &&
-	git commit -a -m master &&
+	echo main >foo/one &&
+	echo main >foo.ext &&
+	git commit -a -m main &&
 
 	# the other side modifies the other file in the directory
 	git checkout -b other HEAD^ &&
@@ -426,7 +426,7 @@ test_expect_success 'combine diff gets tree sorting right' '
 	# And now we merge. The files in the subdirectory will resolve cleanly,
 	# meaning that a combined diff will not find them interesting. But it
 	# will find the tree itself interesting, because it had to be merged.
-	git checkout master &&
+	git checkout main &&
 	git merge other &&
 
 	printf "MM\tfoo\n" >expect &&
t/t4041-diff-submodule-option.sh +1 -1
index f852136585..23701e0e8a 100755
@@ -538,7 +538,7 @@ test_expect_success 'diff --submodule with objects referenced by alternates' '
 	(cd super &&
 		(cd sub &&
 			git fetch &&
-			git checkout origin/master
+			git checkout origin/main
 		) &&
 		git diff --submodule > ../actual
 	) &&
t/t4048-diff-combined-binary.sh +5 -5
index 7f9ad9fa3d..f23824c2b6 100755
@@ -14,7 +14,7 @@ test_expect_success 'setup binary merge conflict' '
 	echo threeQ3 | q_to_nul >binary &&
 	git commit -a -m three &&
 	three=$(git rev-parse --short HEAD:binary) &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	echo resolvedQhooray | q_to_nul >binary &&
 	git commit -a -m resolved &&
 	res=$(git rev-parse --short HEAD:binary)
@@ -62,14 +62,14 @@ test_expect_success 'diff --cc indicates binary-ness' '
 '
 
 test_expect_success 'setup non-binary with binary attribute' '
-	git checkout master &&
+	git checkout main &&
 	test_commit one text &&
 	test_commit two text &&
 	two=$(git rev-parse --short HEAD:text) &&
 	git checkout -b branch-text HEAD^ &&
 	test_commit three text &&
 	three=$(git rev-parse --short HEAD:text) &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	test_commit resolved text &&
 	res=$(git rev-parse --short HEAD:text) &&
 	echo text -diff >.gitattributes
@@ -206,11 +206,11 @@ index $three,$two..0000000
  +THREE
 ++=======
 + TWO
-++>>>>>>> MASTER
+++>>>>>>> MAIN
 EOF
 test_expect_success 'diff --cc respects textconv on worktree file' '
 	git reset --hard HEAD^ &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	git diff >actual &&
 	test_cmp expect actual
 '
t/t4052-stat-output.sh +2 -2
index 28c053849a..e747a26cbd 100755
@@ -353,7 +353,7 @@ cat >expect <<'EOF'
 EOF
 test_expect_success 'merge --stat respects COLUMNS (big change)' '
 	git checkout -b branch HEAD^^ &&
-	COLUMNS=100 git merge --stat --no-ff master^ >output &&
+	COLUMNS=100 git merge --stat --no-ff main^ >output &&
 	grep " | " output >actual &&
 	test_cmp expect actual
 '
@@ -362,7 +362,7 @@ cat >expect <<'EOF'
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++
 EOF
 test_expect_success 'merge --stat respects COLUMNS (long filename)' '
-	COLUMNS=100 git merge --stat --no-ff master >output &&
+	COLUMNS=100 git merge --stat --no-ff main >output &&
 	grep " | " output >actual &&
 	test_cmp expect actual
 '
t/t4056-diff-order.sh +1 -1
index 43dd474a12..07fcee31f4 100755
@@ -106,7 +106,7 @@ done
 test_expect_success 'setup for testing combine-diff order' '
 	git checkout -b tmp HEAD~ &&
 	create_files 3 &&
-	git checkout master &&
+	git checkout main &&
 	git merge --no-commit -s ours tmp &&
 	create_files 5
 '
t/t4057-diff-combined-paths.sh +10 -10
index 0b78573733..918b86fb63 100755
@@ -24,9 +24,9 @@ test_expect_success 'trivial merge - combine-diff empty' '
 		echo $i/2 >>$i.txt
 	done &&
 	git commit -a -m "side 2-9" &&
-	git checkout master &&
+	git checkout main &&
 	echo 1/2 >1.txt &&
-	git commit -a -m "master 1" &&
+	git commit -a -m "main 1" &&
 	git merge side &&
 	>diffc.expect &&
 	diffc_verify
@@ -41,19 +41,19 @@ test_expect_success 'only one truly conflicting path' '
 	done &&
 	echo "4side" >>4.txt &&
 	git commit -a -m "side 2-9 +4" &&
-	git checkout master &&
+	git checkout main &&
 	for i in $(test_seq 1 9)
 	do
 		echo $i/3 >>$i.txt
 	done &&
-	echo "4master" >>4.txt &&
-	git commit -a -m "master 1-9 +4" &&
+	echo "4main" >>4.txt &&
+	git commit -a -m "main 1-9 +4" &&
 	test_must_fail git merge side &&
 	cat <<-\EOF >4.txt &&
 	4
 	4/2
 	4/3
-	4master
+	4main
 	4side
 	EOF
 	git add 4.txt &&
@@ -69,12 +69,12 @@ test_expect_success 'merge introduces new file' '
 		echo $i/4 >>$i.txt
 	done &&
 	git commit -a -m "side 5-9" &&
-	git checkout master &&
+	git checkout main &&
 	for i in $(test_seq 1 3)
 	do
 		echo $i/4 >>$i.txt
 	done &&
-	git commit -a -m "master 1-3 +4hello" &&
+	git commit -a -m "main 1-3 +4hello" &&
 	git merge side &&
 	echo "Hello World" >4hello.txt &&
 	git add 4hello.txt &&
@@ -90,12 +90,12 @@ test_expect_success 'merge removed a file' '
 		echo $i/5 >>$i.txt
 	done &&
 	git commit -a -m "side 5-9" &&
-	git checkout master &&
+	git checkout main &&
 	for i in $(test_seq 1 3)
 	do
 		echo $i/4 >>$i.txt
 	done &&
-	git commit -a -m "master 1-3" &&
+	git commit -a -m "main 1-3" &&
 	git merge side &&
 	git rm 4.txt &&
 	git commit --amend &&
t/t4061-diff-indent.sh +12 -12
index 0f7a6d97a8..5efdc34d51 100755
@@ -266,7 +266,7 @@ test_expect_success 'diff-index: nice spaces with --indent-heuristic' '
 	git reset --soft HEAD~ &&
 	git diff-index --indent-heuristic -p old -- spaces.txt >out-diff-index-compacted &&
 	compare_diff spaces-compacted-expect out-diff-index-compacted &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-index: nice spaces with diff.indentHeuristic=true' '
@@ -274,7 +274,7 @@ test_expect_success 'diff-index: nice spaces with diff.indentHeuristic=true' '
 	git reset --soft HEAD~ &&
 	git -c diff.indentHeuristic=true diff-index -p old -- spaces.txt >out-diff-index-compacted2 &&
 	compare_diff spaces-compacted-expect out-diff-index-compacted2 &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-index: ugly spaces with --no-indent-heuristic' '
@@ -282,7 +282,7 @@ test_expect_success 'diff-index: ugly spaces with --no-indent-heuristic' '
 	git reset --soft HEAD~ &&
 	git diff-index --no-indent-heuristic -p old -- spaces.txt >out-diff-index &&
 	compare_diff spaces-expect out-diff-index &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-index: ugly spaces with diff.indentHeuristic=false' '
@@ -290,7 +290,7 @@ test_expect_success 'diff-index: ugly spaces with diff.indentHeuristic=false' '
 	git reset --soft HEAD~ &&
 	git -c diff.indentHeuristic=false diff-index -p old -- spaces.txt >out-diff-index2 &&
 	compare_diff spaces-expect out-diff-index2 &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-index: --indent-heuristic overrides config' '
@@ -298,7 +298,7 @@ test_expect_success 'diff-index: --indent-heuristic overrides config' '
 	git reset --soft HEAD~ &&
 	git -c diff.indentHeuristic=false diff-index --indent-heuristic -p old -- spaces.txt >out-diff-index-compacted3 &&
 	compare_diff spaces-compacted-expect out-diff-index-compacted3 &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-index: --no-indent-heuristic overrides config' '
@@ -306,7 +306,7 @@ test_expect_success 'diff-index: --no-indent-heuristic overrides config' '
 	git reset --soft HEAD~ &&
 	git -c diff.indentHeuristic=true diff-index --no-indent-heuristic -p old -- spaces.txt >out-diff-index3 &&
 	compare_diff spaces-expect out-diff-index3 &&
-	git checkout -f master
+	git checkout -f main
 '
 
 # --- diff-files tests ----------------------------------------------------
@@ -317,7 +317,7 @@ test_expect_success 'diff-files: nice spaces with --indent-heuristic' '
 	git diff-files --indent-heuristic -p spaces.txt >out-diff-files-raw &&
 	grep -v index out-diff-files-raw >out-diff-files-compacted &&
 	compare_diff spaces-compacted-expect out-diff-files-compacted &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-files: nice spaces with diff.indentHeuristic=true' '
@@ -326,7 +326,7 @@ test_expect_success 'diff-files: nice spaces with diff.indentHeuristic=true' '
 	git -c diff.indentHeuristic=true diff-files -p spaces.txt >out-diff-files-raw2 &&
 	grep -v index out-diff-files-raw2 >out-diff-files-compacted2 &&
 	compare_diff spaces-compacted-expect out-diff-files-compacted2 &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-files: ugly spaces with --no-indent-heuristic' '
@@ -335,7 +335,7 @@ test_expect_success 'diff-files: ugly spaces with --no-indent-heuristic' '
 	git diff-files --no-indent-heuristic -p spaces.txt >out-diff-files-raw &&
 	grep -v index out-diff-files-raw >out-diff-files &&
 	compare_diff spaces-expect out-diff-files &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-files: ugly spaces with diff.indentHeuristic=false' '
@@ -344,7 +344,7 @@ test_expect_success 'diff-files: ugly spaces with diff.indentHeuristic=false' '
 	git -c diff.indentHeuristic=false diff-files -p spaces.txt >out-diff-files-raw2 &&
 	grep -v index out-diff-files-raw2 >out-diff-files &&
 	compare_diff spaces-expect out-diff-files &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-files: --indent-heuristic overrides config' '
@@ -353,7 +353,7 @@ test_expect_success 'diff-files: --indent-heuristic overrides config' '
 	git -c diff.indentHeuristic=false diff-files --indent-heuristic -p spaces.txt >out-diff-files-raw3 &&
 	grep -v index out-diff-files-raw3 >out-diff-files-compacted &&
 	compare_diff spaces-compacted-expect out-diff-files-compacted &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'diff-files: --no-indent-heuristic overrides config' '
@@ -362,7 +362,7 @@ test_expect_success 'diff-files: --no-indent-heuristic overrides config' '
 	git -c diff.indentHeuristic=true diff-files --no-indent-heuristic -p spaces.txt >out-diff-files-raw4 &&
 	grep -v index out-diff-files-raw4 >out-diff-files &&
 	compare_diff spaces-expect out-diff-files &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_done
t/t4066-diff-emit-delay.sh +1 -1
index 6331f63b12..fcd54fa3eb 100755
@@ -13,7 +13,7 @@ test_expect_success 'set up history with a merge' '
 	test_commit B &&
 	git checkout -b side HEAD^ &&
 	test_commit C &&
-	git merge -m M master &&
+	git merge -m M main &&
 	test_commit D
 '
 
t/t4068-diff-symmetric-merge-base.sh +24 -24

152 lines not on this page · raw message

t/t4103-apply-binary.sh +18 -18
index 1b420e3b5f..b5a68cfe78 100755
@@ -31,64 +31,64 @@ test_expect_success 'setup' '
 	git update-index --add --remove file1 file2 file3 file4 &&
 	git commit -m "Second Version" &&
 
-	git diff-tree -p master binary >B.diff &&
-	git diff-tree -p -C master binary >C.diff &&
+	git diff-tree -p main binary >B.diff &&
+	git diff-tree -p -C main binary >C.diff &&
 
-	git diff-tree -p --binary master binary >BF.diff &&
-	git diff-tree -p --binary -C master binary >CF.diff &&
+	git diff-tree -p --binary main binary >BF.diff &&
+	git diff-tree -p --binary -C main binary >CF.diff &&
 
-	git diff-tree -p --full-index master binary >B-index.diff &&
-	git diff-tree -p -C --full-index master binary >C-index.diff &&
+	git diff-tree -p --full-index main binary >B-index.diff &&
+	git diff-tree -p -C --full-index main binary >C-index.diff &&
 
-	git diff-tree -p --binary --no-prefix master binary -- file3 >B0.diff &&
+	git diff-tree -p --binary --no-prefix main binary -- file3 >B0.diff &&
 
 	git init other-repo &&
 	(
 		cd other-repo &&
-		git fetch .. master &&
+		git fetch .. main &&
 		git reset --hard FETCH_HEAD
 	)
 '
 
 test_expect_success 'stat binary diff -- should not fail.' \
-	'git checkout master &&
+	'git checkout main &&
 	 git apply --stat --summary B.diff'
 
 test_expect_success 'stat binary -p0 diff -- should not fail.' '
-	 git checkout master &&
+	 git checkout main &&
 	 git apply --stat -p0 B0.diff
 '
 
 test_expect_success 'stat binary diff (copy) -- should not fail.' \
-	'git checkout master &&
+	'git checkout main &&
 	 git apply --stat --summary C.diff'
 
 test_expect_success 'check binary diff -- should fail.' \
-	'git checkout master &&
+	'git checkout main &&
 	 test_must_fail git apply --check B.diff'
 
 test_expect_success 'check binary diff (copy) -- should fail.' \
-	'git checkout master &&
+	'git checkout main &&
 	 test_must_fail git apply --check C.diff'
 
 test_expect_success \
 	'check incomplete binary diff with replacement -- should fail.' '
-	git checkout master &&
+	git checkout main &&
 	test_must_fail git apply --check --allow-binary-replacement B.diff
 '
 
 test_expect_success \
     'check incomplete binary diff with replacement (copy) -- should fail.' '
-	 git checkout master &&
+	 git checkout main &&
 	 test_must_fail git apply --check --allow-binary-replacement C.diff
 '
 
 test_expect_success 'check binary diff with replacement.' \
-	'git checkout master &&
+	'git checkout main &&
 	 git apply --check --allow-binary-replacement BF.diff'
 
 test_expect_success 'check binary diff with replacement (copy).' \
-	'git checkout master &&
+	'git checkout main &&
 	 git apply --check --allow-binary-replacement CF.diff'
 
 # Now we start applying them.
@@ -96,7 +96,7 @@ test_expect_success 'check binary diff with replacement (copy).' \
 do_reset () {
 	rm -f file? &&
 	git reset --hard &&
-	git checkout -f master
+	git checkout -f main
 }
 
 test_expect_success 'apply binary diff -- should fail.' \
t/t4108-apply-threeway.sh +7 -7
index d7349ced6b..f073df1792 100755
@@ -24,14 +24,14 @@ test_expect_success setup '
 	test_tick &&
 	test_write_lines 1 two 3 4 5 six 7 >one &&
 	test_write_lines 1 two 3 4 5 6 7 >two &&
-	git commit -a -m master &&
+	git commit -a -m main &&
 
 	git checkout side &&
 	test_write_lines 1 2 3 4 five 6 7 >one &&
 	test_write_lines 1 2 3 4 five 6 7 >two &&
 	git commit -a -m side &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'apply without --3way' '
@@ -39,7 +39,7 @@ test_expect_success 'apply without --3way' '
 
 	# should fail to apply
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	test_must_fail git apply --index P.diff &&
 	# should leave things intact
 	git diff-files --exit-code &&
@@ -52,14 +52,14 @@ test_apply_with_3way () {
 
 	# The corresponding conflicted merge
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	test_must_fail git merge --no-commit side &&
 	git ls-files -s >expect.ls &&
 	print_sanitized_conflicted_diff >expect.diff &&
 
 	# should fail to apply
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	test_must_fail git apply --index --3way P.diff &&
 	git ls-files -s >actual.ls &&
 	print_sanitized_conflicted_diff >actual.diff &&
@@ -86,7 +86,7 @@ test_expect_success 'apply with --3way with rerere enabled' '
 
 	# The corresponding conflicted merge
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	test_must_fail git merge --no-commit side &&
 
 	# Manually resolve and record the resolution
@@ -96,7 +96,7 @@ test_expect_success 'apply with --3way with rerere enabled' '
 
 	# should fail to apply
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	test_must_fail git apply --index --3way P.diff &&
 
 	# but rerere should have replayed the recorded resolution
t/t4121-apply-diffs.sh +1 -1
index 66368effd5..ff2257fef1 100755
@@ -23,7 +23,7 @@ test_expect_success 'setup' \
 	git commit -a -q -m 2 &&
 	echo 9 >>file &&
 	git commit -a -q -m 3 &&
-	git checkout master'
+	git checkout main'
 
 test_expect_success \
 	'check if contextually independent diffs for the same file apply' \
t/t4122-apply-symlink-inside.sh +3 -3
index 4acb3f336e..36562677c4 100755
@@ -35,11 +35,11 @@ test_expect_success apply '
 
 test_expect_success 'check result' '
 
-	git diff --exit-code master &&
-	git diff --exit-code --cached master &&
+	git diff --exit-code main &&
+	git diff --exit-code --cached main &&
 	test_tick &&
 	git commit -m replay &&
-	T1=$(git rev-parse "master^{tree}") &&
+	T1=$(git rev-parse "main^{tree}") &&
 	T2=$(git rev-parse "HEAD^{tree}") &&
 	test "z$T1" = "z$T2"
 
t/t4150-am.sh +13 -13
index 3ecbef6f8e..2514341522 100755
@@ -179,8 +179,8 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m "added another file" &&
 
-	git format-patch --stdout master >lorem-move.patch &&
-	git format-patch --no-prefix --stdout master >lorem-zero.patch &&
+	git format-patch --stdout main >lorem-move.patch &&
+	git format-patch --no-prefix --stdout main >lorem-zero.patch &&
 
 	git checkout -b rename &&
 	git mv file renamed &&
@@ -453,11 +453,11 @@ test_expect_success 'am changes committer and keeps author' '
 	git checkout first &&
 	git am patch2 &&
 	test_path_is_missing .git/rebase-apply &&
-	test "$(git rev-parse master^^)" = "$(git rev-parse HEAD^^)" &&
-	git diff --exit-code master..HEAD &&
-	git diff --exit-code master^..HEAD^ &&
-	compare author master HEAD &&
-	compare author master^ HEAD^ &&
+	test "$(git rev-parse main^^)" = "$(git rev-parse HEAD^^)" &&
+	git diff --exit-code main..HEAD &&
+	git diff --exit-code main^..HEAD^ &&
+	compare author main HEAD &&
+	compare author main^ HEAD^ &&
 	test "$GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" = \
 	     "$(git log -1 --pretty=format:"%cn <%ce>" HEAD)"
 '
@@ -759,7 +759,7 @@ test_expect_success 'am takes patches from a Pine mailbox' '
 	git checkout first &&
 	cat pine patch1 | git am &&
 	test_path_is_missing .git/rebase-apply &&
-	git diff --exit-code master^..HEAD
+	git diff --exit-code main^..HEAD
 '
 
 test_expect_success 'am fails on mail without patch' '
@@ -1112,21 +1112,21 @@ test_expect_success 'am and .gitattibutes' '
 		test_commit sixth &&
 
 		git checkout test &&
-		git format-patch --stdout master..HEAD >patches &&
-		git reset --hard master &&
+		git format-patch --stdout main..HEAD >patches &&
+		git reset --hard main &&
 		git am patches &&
 		grep "smudged" a.txt &&
 
 		git checkout removal &&
 		git reset --hard &&
-		git format-patch --stdout master..HEAD >patches &&
-		git reset --hard master &&
+		git format-patch --stdout main..HEAD >patches &&
+		git reset --hard main &&
 		git am patches &&
 		grep "clean" a.txt &&
 
 		git checkout conflict &&
 		git reset --hard &&
-		git format-patch --stdout master..HEAD >patches &&
+		git format-patch --stdout main..HEAD >patches &&
 		git reset --hard fourth &&
 		test_must_fail git am -3 patches &&
 		grep "<<<<<<<<<<" a.txt
t/t4200-rerere.sh +10 -10
index b12b43e9e9..a6222b84bb 100755
@@ -8,7 +8,7 @@ test_description='git rerere
 ! [fifth] version1
  ! [first] first
   ! [fourth] version1
-   ! [master] initial
+   ! [main] initial
     ! [second] prefer first over second
      ! [third] version2
 ------
@@ -19,7 +19,7 @@ test_description='git rerere
     -  [second] prefer first over second
  +  +  [first] first
     +  [second^] second
-++++++ [master] initial
+++++++ [main] initial
 '
 
 . ./test-lib.sh
@@ -57,7 +57,7 @@ test_expect_success 'setup' '
 	test_tick &&
 	git commit -q -a -m first &&
 
-	git checkout -b second master &&
+	git checkout -b second main &&
 	git show first:a1 |
 	sed -e "s/To die, t/To die! T/" -e "s/Some title/Some Title/" >a1 &&
 	echo "* END *" >>a1 &&
@@ -168,7 +168,7 @@ test_expect_success 'first postimage wins' '
 
 	oldmtimepost=$(test-tool chmtime --get -60 $rr/postimage) &&
 
-	git checkout -b third master &&
+	git checkout -b third main &&
 	git show second^:a1 | sed "s/To die: t/To die! T/" >a1 &&
 	git commit -q -a -m third &&
 
@@ -580,13 +580,13 @@ test_expect_success 'multiple identical conflicts' '
 test_expect_success 'rerere with unexpected conflict markers does not crash' '
 	git reset --hard &&
 
-	git checkout -b branch-1 master &&
+	git checkout -b branch-1 main &&
 	echo "bar" >test &&
 	git add test &&
 	git commit -q -m two &&
 
 	git reset --hard &&
-	git checkout -b branch-2 master &&
+	git checkout -b branch-2 main &&
 	echo "foo" >test &&
 	git add test &&
 	git commit -q -a -m one &&
@@ -601,7 +601,7 @@ test_expect_success 'rerere with unexpected conflict markers does not crash' '
 test_expect_success 'rerere with inner conflict markers' '
 	git reset --hard &&
 
-	git checkout -b A master &&
+	git checkout -b A main &&
 	echo "bar" >test &&
 	git add test &&
 	git commit -q -m two &&
@@ -610,7 +610,7 @@ test_expect_success 'rerere with inner conflict markers' '
 	git commit -q -m three &&
 
 	git reset --hard &&
-	git checkout -b B master &&
+	git checkout -b B main &&
 	echo "foo" >test &&
 	git add test &&
 	git commit -q -a -m one &&
@@ -651,11 +651,11 @@ test_expect_success 'setup simple stage 1 handling' '
 		git add original &&
 		git commit -m original &&
 
-		git checkout -b A master &&
+		git checkout -b A main &&
 		git mv original A &&
 		git commit -m "rename to A" &&
 
-		git checkout -b B master &&
+		git checkout -b B main &&
 		git mv original B &&
 		git commit -m "rename to B"
 	)
t/t4201-shortlog.sh +1 -1
index 3d5c4a2086..005fff4c2c 100755
@@ -191,7 +191,7 @@ test_expect_success 'shortlog with revision pseudo options' '
 '
 
 test_expect_success 'shortlog with --output=<file>' '
-	git shortlog --output=shortlog -1 master >output &&
+	git shortlog --output=shortlog -1 main >output &&
 	test_must_be_empty output &&
 	test_line_count = 3 shortlog
 '
t/t4202-log.sh +53 -53

314 lines not on this page · raw message

t/t4203-mailmap.sh +1 -1
index 586c3a86b1..2127b1652d 100755
@@ -194,7 +194,7 @@ test_expect_success 'No mailmap files, but configured' '
 
 test_expect_success 'setup mailmap blob tests' '
 	git checkout -b map &&
-	test_when_finished "git checkout master" &&
+	test_when_finished "git checkout main" &&
 	cat >just-bugs <<- EOF &&
 	Blob Guy <[email protected]>
 	EOF
t/t4204-patch-id.sh +13 -13
index 8ff8bd84c7..3808dce5c7 100755
@@ -13,9 +13,9 @@ test_expect_success 'setup' '
 	test_write_lines $as b >foo &&
 	test_write_lines $as b >bar &&
 	git commit -a -m first &&
-	git checkout -b same master &&
+	git checkout -b same main &&
 	git commit --amend -m same-msg &&
-	git checkout -b notsame master &&
+	git checkout -b notsame main &&
 	echo c >foo &&
 	echo c >bar &&
 	git commit --amend -a -m notsame-msg &&
@@ -46,31 +46,31 @@ get_patch_id () {
 }
 
 test_expect_success 'patch-id detects equality' '
-	get_patch_id master &&
+	get_patch_id main &&
 	get_patch_id same &&
-	test_cmp patch-id_master patch-id_same
+	test_cmp patch-id_main patch-id_same
 '
 
 test_expect_success 'patch-id detects inequality' '
-	get_patch_id master &&
+	get_patch_id main &&
 	get_patch_id notsame &&
-	! test_cmp patch-id_master patch-id_notsame
+	! test_cmp patch-id_main patch-id_notsame
 '
 
 test_expect_success 'patch-id supports git-format-patch output' '
-	get_patch_id master &&
+	get_patch_id main &&
 	git checkout same &&
 	git format-patch -1 --stdout | calc_patch_id same &&
-	test_cmp patch-id_master patch-id_same &&
+	test_cmp patch-id_main patch-id_same &&
 	set $(git format-patch -1 --stdout | git patch-id) &&
 	test "$2" = $(git rev-parse HEAD)
 '
 
 test_expect_success 'whitespace is irrelevant in footer' '
-	get_patch_id master &&
+	get_patch_id main &&
 	git checkout same &&
 	git format-patch -1 --stdout | sed "s/ \$//" | calc_patch_id same &&
-	test_cmp patch-id_master patch-id_same
+	test_cmp patch-id_main patch-id_same
 '
 
 cmp_patch_id () {
@@ -88,7 +88,7 @@ test_patch_id_file_order () {
 	shift
 	name="order-${1}-$relevant"
 	shift
-	get_top_diff "master" | calc_patch_id "$name" "$@" &&
+	get_top_diff "main" | calc_patch_id "$name" "$@" &&
 	git checkout same &&
 	git format-patch -1 --stdout -O foo-then-bar |
 		calc_patch_id "ordered-$name" "$@" &&
@@ -137,10 +137,10 @@ test_expect_success '--stable overrides patchid.stable = false' '
 '
 
 test_expect_success 'patch-id supports git-format-patch MIME output' '
-	get_patch_id master &&
+	get_patch_id main &&
 	git checkout same &&
 	git format-patch -1 --attach --stdout | calc_patch_id same &&
-	test_cmp patch-id_master patch-id_same
+	test_cmp patch-id_main patch-id_same
 '
 
 test_expect_success 'patch-id respects config from subdir' '
t/t4207-log-decoration-colors.sh +3 -3
index 60f040cab8..b6793064dc 100755
@@ -40,13 +40,13 @@ test_expect_success setup '
 
 cat >expected <<EOF
 ${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_HEAD}HEAD ->\
- ${c_reset}${c_branch}master${c_reset}${c_commit},\
+ ${c_reset}${c_branch}main${c_reset}${c_commit},\
  ${c_reset}${c_tag}tag: v1.0${c_reset}${c_commit},\
  ${c_reset}${c_tag}tag: B${c_reset}${c_commit})${c_reset} B
 ${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_tag}tag: A1${c_reset}${c_commit},\
- ${c_reset}${c_remoteBranch}other/master${c_reset}${c_commit})${c_reset} A1
+ ${c_reset}${c_remoteBranch}other/main${c_reset}${c_commit})${c_reset} A1
 ${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_stash}refs/stash${c_reset}${c_commit})${c_reset}\
- On master: Changes to A.t
+ On main: Changes to A.t
 ${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_tag}tag: A${c_reset}${c_commit})${c_reset} A
 EOF
 
t/t4208-log-magic-pathspec.sh +2 -2
index 6cdbe4747a..58b928dbf3 100755
@@ -26,7 +26,7 @@ test_expect_success '"git log :/a -- " should not be ambiguous' '
 '
 
 test_expect_success '"git log :/detached -- " should find a commit only in HEAD' '
-	test_when_finished "git checkout master" &&
+	test_when_finished "git checkout main" &&
 	git checkout --detach &&
 	# Must manually call `test_tick` instead of using `test_commit`,
 	# because the latter additionally creates a tag, which would make
@@ -119,7 +119,7 @@ test_expect_success 'command line pathspec parsing for "git log"' '
 	git checkout HEAD^ &&
 	echo 2 >a &&
 	git commit -a -m "update a to 2" &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	git add a &&
 	git log --merge -- a
 '
t/t4211/history.export +1 -1
index f9f41e211e..006972a1f2 100644
@@ -316,7 +316,7 @@ long f(long x)
 	return s;
 }
 
-commit refs/heads/master
+commit refs/heads/main
 mark :19
 author Thomas Rast <[email protected]> 1362045024 +0100
 committer Thomas Rast <[email protected]> 1362045024 +0100
t/t4214-log-graph-octopus.sh +1 -1
index a080325098..d4e07cb0ba 100755
@@ -17,7 +17,7 @@ test_cmp_colored_graph () {
 test_expect_success 'set up merge history' '
 	test_commit initial &&
 	for i in 1 2 3 4 ; do
-		git checkout master -b $i || return $?
+		git checkout main -b $i || return $?
 		# Make tag name different from branch name, to avoid
 		# ambiguity error when calling checkout.
 		test_commit $i $i $i tag$i || return $?
t/t4216-log-bloom.sh +2 -2
index d11040ce41..95a9bae4de 100755
@@ -21,7 +21,7 @@ test_expect_success 'setup test - repo, commits, commit graph, log outputs' '
 	test_commit c10 file_to_be_deleted &&
 	git checkout -b side HEAD~4 &&
 	test_commit side-1 file4 &&
-	git checkout master &&
+	git checkout main &&
 	git merge side &&
 	test_commit c11 file5 &&
 	mv file5 file5_renamed &&
@@ -94,7 +94,7 @@ do
 		      "--topo-order" \
 		      "--date-order" \
 		      "--author-date-order" \
-		      "--ancestry-path side..master"
+		      "--ancestry-path side..main"
 	do
 		test_expect_success "git log option: $option for path: $path" '
 			test_bloom_filters_used "$option -- $path" &&
t/t4253-am-keep-cr-dos.sh +10 -10
index 6e1b73ec3a..cf51efa2ee 100755
@@ -43,7 +43,7 @@ test_expect_success 'setup repository with dos files' '
 
 test_expect_success 'am with dos files without --keep-cr' '
 	git checkout -b dosfiles initial &&
-	git format-patch -k initial..master &&
+	git format-patch -k initial..main &&
 	test_must_fail git am -k -3 000*.patch &&
 	git am --abort &&
 	rm -rf .git/rebase-apply 000*.patch
@@ -51,23 +51,23 @@ test_expect_success 'am with dos files without --keep-cr' '
 
 test_expect_success 'am with dos files with --keep-cr' '
 	git checkout -b dosfiles-keep-cr initial &&
-	git format-patch -k --stdout initial..master >output &&
+	git format-patch -k --stdout initial..main >output &&
 	git am --keep-cr -k -3 output &&
-	git diff --exit-code master
+	git diff --exit-code main
 '
 
 test_expect_success 'am with dos files config am.keepcr' '
 	git config am.keepcr 1 &&
 	git checkout -b dosfiles-conf-keepcr initial &&
-	git format-patch -k --stdout initial..master >output &&
+	git format-patch -k --stdout initial..main >output &&
 	git am -k -3 output &&
-	git diff --exit-code master
+	git diff --exit-code main
 '
 
 test_expect_success 'am with dos files config am.keepcr overridden by --no-keep-cr' '
 	git config am.keepcr 1 &&
 	git checkout -b dosfiles-conf-keepcr-override initial &&
-	git format-patch -k initial..master &&
+	git format-patch -k initial..main &&
 	test_must_fail git am -k -3 --no-keep-cr 000*.patch &&
 	git am --abort &&
 	rm -rf .git/rebase-apply 000*.patch
@@ -75,14 +75,14 @@ test_expect_success 'am with dos files config am.keepcr overridden by --no-keep-
 
 test_expect_success 'am with dos files with --keep-cr continue' '
 	git checkout -b dosfiles-keep-cr-continue initial &&
-	git format-patch -k initial..master &&
+	git format-patch -k initial..main &&
 	append_cr <file1a >file &&
 	git commit -m "different patch" file &&
 	test_must_fail git am --keep-cr -k -3 000*.patch &&
 	append_cr <file2 >file &&
 	git add file &&
 	git am -3 --resolved &&
-	git diff --exit-code master
+	git diff --exit-code main
 '
 
 test_expect_success 'am with unix files config am.keepcr overridden by --no-keep-cr' '
@@ -90,9 +90,9 @@ test_expect_success 'am with unix files config am.keepcr overridden by --no-keep
 	git checkout -b unixfiles-conf-keepcr-override initial &&
 	cp -f file1 file &&
 	git commit -m "line ending to unix" file &&
-	git format-patch -k initial..master &&
+	git format-patch -k initial..main &&
 	git am -k -3 --no-keep-cr 000*.patch &&
-	git diff --exit-code -w master
+	git diff --exit-code -w main
 '
 
 test_done
t/t4257-am-interactive.sh +1 -1
index 5344bd248a..aed8f4de3d 100755
@@ -10,7 +10,7 @@ test_expect_success 'set up patches to apply' '
 	git format-patch --stdout -2 >mbox &&
 
 	git reset --hard unrelated &&
-	test_commit conflict-master file master base
+	test_commit conflict-main file main base
 '
 
 # Sanity check our setup.
t/test-lib.sh +2 -2
index 76ab747b53..b783629348 100644
@@ -257,13 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-3404)
+3404|4013)
 	# Avoid conflicts with patch series that are cooking at the same time
 	# as the patch series changing the default of `init.defaultBranch`.
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-3]*)
+[0-4]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#24 lore raw

PATCH 21/28 t7[5-9]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Excluding t7817, which is added in an unrelated patch series at the time of writing, this adjusts t7[5-9]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t7[5-9]*.sh)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t7501-commit-basic-functionality.sh         |   2 +-
 t/t7502-commit-porcelain.sh                   |  12 +-
 ...3-pre-commit-and-pre-merge-commit-hooks.sh |  42 ++---
 t/t7504-commit-msg-hook.sh                    |  24 +--
 t/t7505-prepare-commit-msg-hook.sh            |  20 +-
 t/t7508-status.sh                             |  58 +++---
 t/t7510-signed-commit.sh                      |   2 +-
 t/t7512-status-help.sh                        |  40 ++--
 t/t7517-per-repo-email.sh                     |  12 +-
 t/t7600-merge.sh                              |  44 ++---
 t/t7606-merge-custom.sh                       |   2 +-
 t/t7608-merge-messages.sh                     |  36 ++--
 t/t7610-mergetool.sh                          | 174 +++++++++---------
 t/t7611-merge-abort.sh                        |   4 +-
 t/t7612-merge-verify-signatures.sh            |   2 +-
 t/t7614-merge-signoff.sh                      |  24 +--
 t/t7701-repack-unpack-unreachable.sh          |   2 +-
 t/t7800-difftool.sh                           |  38 ++--
 t/t7810-grep.sh                               |  28 +--
 t/test-lib.sh                                 |   4 +-
 20 files changed, 285 insertions(+), 285 deletions(-)
t/t7501-commit-basic-functionality.sh +1 -1
index 110b4bf459..72c9031934 100755
@@ -603,7 +603,7 @@ test_expect_success 'same tree (merge and amend merge)' '
 	echo zero >zero &&
 	git add zero &&
 	git commit -m "add zero" &&
-	git checkout master &&
+	git checkout main &&
 
 	git merge -s ours side -m "empty ok" &&
 	git diff HEAD^ HEAD >actual &&
t/t7502-commit-porcelain.sh +6 -6
index 14c92e4c25..3956dcc237 100755
@@ -76,7 +76,7 @@ test_expect_success 'output summary format for merges' '
 
 output_tests_cleanup() {
 	# this is needed for "do not fire editor in the presence of conflicts"
-	git checkout master &&
+	git checkout main &&
 
 	# this is needed for the "partial removal" test to pass
 	git rm file1 &&
@@ -440,7 +440,7 @@ test_expect_success 'do not fire editor in the presence of conflicts' '
 	git add g &&
 	git commit -m "add g" &&
 	git branch second &&
-	echo master >g &&
+	echo main >g &&
 	echo g >h &&
 	git add g h &&
 	git commit -m "modify g and add h" &&
@@ -449,7 +449,7 @@ test_expect_success 'do not fire editor in the presence of conflicts' '
 	git add g &&
 	git commit -m second &&
 	# Must fail due to conflict
-	test_must_fail git cherry-pick -n master &&
+	test_must_fail git cherry-pick -n main &&
 	echo "editor not started" >.git/result &&
 	(
 		GIT_EDITOR="\"$(pwd)/.git/FAKE_EDITOR\"" &&
@@ -478,9 +478,9 @@ git reset -q --hard
 
 test_expect_success 'Hand committing of a redundant merge removes dups' '
 
-	git rev-parse second master >expect &&
-	test_must_fail git merge second master &&
-	git checkout master g &&
+	git rev-parse second main >expect &&
+	test_must_fail git merge second main &&
+	git checkout main g &&
 	EDITOR=: git commit -a &&
 	git cat-file commit HEAD >raw &&
 	sed -n -e "s/^parent //p" -e "/^$/q" raw >actual &&
t/t7503-pre-commit-and-pre-merge-commit-hooks.sh +21 -21

108 lines not on this page · raw message

t/t7504-commit-msg-hook.sh +12 -12
index 31b9c6a2c1..2547362a39 100755
@@ -142,12 +142,12 @@ test_expect_success '--no-verify with failing hook (editor)' '
 test_expect_success 'merge fails with failing hook' '
 
 	test_when_finished "git branch -D newbranch" &&
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout --orphan newbranch &&
 	: >file2 &&
 	git add file2 &&
 	git commit --no-verify file2 -m in-side-branch &&
-	test_must_fail git merge --allow-unrelated-histories master &&
+	test_must_fail git merge --allow-unrelated-histories main &&
 	commit_msg_is "in-side-branch" # HEAD before merge
 
 '
@@ -155,14 +155,14 @@ test_expect_success 'merge fails with failing hook' '
 test_expect_success 'merge bypasses failing hook with --no-verify' '
 
 	test_when_finished "git branch -D newbranch" &&
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout --orphan newbranch &&
 	git rm -f file &&
 	: >file2 &&
 	git add file2 &&
 	git commit --no-verify file2 -m in-side-branch &&
-	git merge --no-verify --allow-unrelated-histories master &&
-	commit_msg_is "Merge branch '\''master'\'' into newbranch"
+	git merge --no-verify --allow-unrelated-histories main &&
+	commit_msg_is "Merge branch '\''main'\'' into newbranch"
 '
 
 
@@ -248,28 +248,28 @@ test_expect_success "hook doesn't edit commit message (editor)" '
 
 test_expect_success 'hook called in git-merge picks up commit message' '
 	test_when_finished "git branch -D newbranch" &&
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout --orphan newbranch &&
 	git rm -f file &&
 	: >file2 &&
 	git add file2 &&
 	git commit --no-verify file2 -m in-side-branch &&
-	git merge --allow-unrelated-histories master &&
+	git merge --allow-unrelated-histories main &&
 	commit_msg_is "new message"
 '
 
 test_expect_failure 'merge --continue remembers --no-verify' '
 	test_when_finished "git branch -D newbranch" &&
-	test_when_finished "git checkout -f master" &&
-	git checkout master &&
+	test_when_finished "git checkout -f main" &&
+	git checkout main &&
 	echo a >file2 &&
 	git add file2 &&
-	git commit --no-verify -m "add file2 to master" &&
-	git checkout -b newbranch master^ &&
+	git commit --no-verify -m "add file2 to main" &&
+	git checkout -b newbranch main^ &&
 	echo b >file2 &&
 	git add file2 &&
 	git commit --no-verify file2 -m in-side-branch &&
-	git merge --no-verify -m not-rewritten-by-hook master &&
+	git merge --no-verify -m not-rewritten-by-hook main &&
 	# resolve conflict:
 	echo c >file2 &&
 	git add file2 &&
t/t7505-prepare-commit-msg-hook.sh +10 -10
index 94f85cdf83..20b49629cd 100755
@@ -15,7 +15,7 @@ test_expect_success 'set up commits for rebasing' '
 	do
 		test_commit rebase-$i c $i
 	done &&
-	git checkout master &&
+	git checkout main &&
 
 	cat >rebase-todo <<-EOF
 	pick $(git rev-parse rebase-a)
@@ -190,7 +190,7 @@ test_expect_success 'with hook (-c)' '
 
 test_expect_success 'with hook (merge)' '
 
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other HEAD@{1} &&
 	echo "more" >>file &&
 	git add file &&
@@ -202,7 +202,7 @@ test_expect_success 'with hook (merge)' '
 
 test_expect_success 'with hook and editor (merge)' '
 
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other HEAD@{1} &&
 	echo "more" >>file &&
 	git add file &&
@@ -218,7 +218,7 @@ test_rebase () {
 	test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase ${mode:--i})" '
 		test_when_finished "\
 			git rebase --abort
-			git checkout -f master
+			git checkout -f main
 			git branch -D tmp" &&
 		git checkout -b tmp rebase-me &&
 		GIT_SEQUENCE_EDITOR="cp rebase-todo" &&
@@ -250,14 +250,14 @@ test_rebase success
 test_have_prereq !REBASE_P || test_rebase success -p
 
 test_expect_success 'with hook (cherry-pick)' '
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other b &&
 	git cherry-pick rebase-1 &&
 	test "$(git log -1 --pretty=format:%s)" = "message (no editor)"
 '
 
 test_expect_success 'with hook and editor (cherry-pick)' '
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other b &&
 	git cherry-pick -e rebase-1 &&
 	test "$(git log -1 --pretty=format:%s)" = merge
@@ -270,7 +270,7 @@ EOF
 
 test_expect_success 'with failing hook' '
 
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	head=$(git rev-parse HEAD) &&
 	echo "more" >> file &&
 	git add file &&
@@ -280,7 +280,7 @@ test_expect_success 'with failing hook' '
 
 test_expect_success 'with failing hook (--no-verify)' '
 
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	head=$(git rev-parse HEAD) &&
 	echo "more" >> file &&
 	git add file &&
@@ -290,7 +290,7 @@ test_expect_success 'with failing hook (--no-verify)' '
 
 test_expect_success 'with failing hook (merge)' '
 
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other HEAD@{1} &&
 	echo "more" >> file &&
 	git add file &&
@@ -305,7 +305,7 @@ test_expect_success 'with failing hook (merge)' '
 '
 
 test_expect_success C_LOCALE_OUTPUT 'with failing hook (cherry-pick)' '
-	test_when_finished "git checkout -f master" &&
+	test_when_finished "git checkout -f main" &&
 	git checkout -B other b &&
 	test_must_fail git cherry-pick rebase-1 2>actual &&
 	test $(grep -c prepare-commit-msg actual) = 1
t/t7508-status.sh +29 -29

229 lines not on this page · raw message

t/t7510-signed-commit.sh +1 -1
index 6baaa1ad91..0653fdcd02 100755
@@ -25,7 +25,7 @@ test_expect_success GPG 'create signed commits' '
 	echo 3 >elif && git add elif &&
 	test_tick && git commit -m "third on side" &&
 
-	git checkout master &&
+	git checkout main &&
 	test_tick && git merge -S side &&
 	git tag merge &&
 
t/t7512-status-help.sh +20 -20
index 29518e0949..29aa9adcfd 100755
@@ -17,14 +17,14 @@ test_expect_success 'prepare for conflicts' '
 	git config --global advice.statusuoption false &&
 	test_commit init main.txt init &&
 	git branch conflicts &&
-	test_commit on_master main.txt on_master &&
+	test_commit on_main main.txt on_main &&
 	git checkout conflicts &&
 	test_commit on_conflicts main.txt on_conflicts
 '
 
 
 test_expect_success 'status when conflicts unresolved' '
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	cat >expected <<\EOF &&
 On branch conflicts
 You have unmerged paths.
@@ -44,7 +44,7 @@ EOF
 
 test_expect_success 'status when conflicts resolved before commit' '
 	git reset --hard conflicts &&
-	test_must_fail git merge master &&
+	test_must_fail git merge main &&
 	echo one >main.txt &&
 	git add main.txt &&
 	cat >expected <<\EOF &&
@@ -63,7 +63,7 @@ EOF
 
 
 test_expect_success 'prepare for rebase conflicts' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b rebase_conflicts &&
 	test_commit one_rebase main.txt one &&
 	test_commit two_rebase main.txt two &&
@@ -118,11 +118,11 @@ EOF
 
 
 test_expect_success 'prepare for rebase_i_conflicts' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b rebase_i_conflicts &&
 	test_commit one_unmerge main.txt one_unmerge &&
 	git branch rebase_i_conflicts_second &&
-	test_commit one_master main.txt one_master &&
+	test_commit one_main main.txt one_main &&
 	git checkout rebase_i_conflicts_second &&
 	test_commit one_second main.txt one_second
 '
@@ -182,7 +182,7 @@ EOF
 
 
 test_expect_success 'status when rebasing -i in edit mode' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b rebase_i_edit &&
 	test_commit one_rebase_i main.txt one &&
 	test_commit two_rebase_i main.txt two &&
@@ -212,7 +212,7 @@ EOF
 
 
 test_expect_success 'status when splitting a commit' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b split_commit &&
 	test_commit one_split main.txt one &&
 	test_commit two_split main.txt two &&
@@ -251,7 +251,7 @@ EOF
 
 
 test_expect_success 'status after editing the last commit with --amend during a rebase -i' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b amend_last &&
 	test_commit one_amend main.txt one &&
 	test_commit two_amend main.txt two &&
@@ -284,7 +284,7 @@ EOF
 
 
 test_expect_success 'prepare for several edits' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b several_edits &&
 	test_commit one_edits main.txt one &&
 	test_commit two_edits main.txt two &&
@@ -593,7 +593,7 @@ EOF
 
 
 test_expect_success 'prepare am_session' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b am_session &&
 	test_commit one_am one.txt "one" &&
 	test_commit two_am two.txt "two" &&
@@ -666,7 +666,7 @@ EOF
 
 
 test_expect_success 'status when bisecting' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b bisect &&
 	test_commit one_bisect main.txt one &&
 	test_commit two_bisect main.txt two &&
@@ -689,7 +689,7 @@ EOF
 
 
 test_expect_success 'status when rebase --apply conflicts with statushints disabled' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b statushints_disabled &&
 	test_when_finished "git config --local advice.statushints true" &&
 	git config --local advice.statushints false &&
@@ -714,7 +714,7 @@ EOF
 
 
 test_expect_success 'prepare for cherry-pick conflicts' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b cherry_branch &&
 	test_commit one_cherry main.txt one &&
 	test_commit two_cherries main.txt two &&
@@ -825,7 +825,7 @@ EOF
 '
 
 test_expect_success 'status while reverting commit (conflicts)' '
-	git checkout master &&
+	git checkout main &&
 	echo before >to-revert.txt &&
 	test_commit before to-revert.txt &&
 	echo old >to-revert.txt &&
@@ -835,7 +835,7 @@ test_expect_success 'status while reverting commit (conflicts)' '
 	TO_REVERT=$(git rev-parse --short HEAD^) &&
 	test_must_fail git revert $TO_REVERT &&
 	cat >expected <<EOF &&
-On branch master
+On branch main
 You are currently reverting commit $TO_REVERT.
   (fix conflicts and run "git revert --continue")
   (use "git revert --skip" to skip this patch)
@@ -856,7 +856,7 @@ test_expect_success 'status while reverting commit (conflicts resolved)' '
 	echo reverted >to-revert.txt &&
 	git add to-revert.txt &&
 	cat >expected <<EOF &&
-On branch master
+On branch main
 You are currently reverting commit $TO_REVERT.
   (all conflicts fixed: run "git revert --continue")
   (use "git revert --skip" to skip this patch)
@@ -875,7 +875,7 @@ EOF
 test_expect_success 'status after reverting commit' '
 	git revert --continue &&
 	cat >expected <<\EOF &&
-On branch master
+On branch main
 nothing to commit (use -u to show untracked files)
 EOF
 	git status --untracked-files=no >actual &&
@@ -889,7 +889,7 @@ test_expect_success 'status while reverting after committing conflict resolution
 	echo reverted >to-revert.txt &&
 	git commit -a &&
 	cat >expected <<EOF &&
-On branch master
+On branch main
 Revert currently in progress.
   (run "git revert --continue" to continue)
   (use "git revert --skip" to skip this patch)
@@ -902,7 +902,7 @@ EOF
 '
 
 test_expect_success 'prepare for different number of commits rebased' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b several_commits &&
 	test_commit one_commit main.txt one &&
 	test_commit two_commit main.txt two &&
t/t7517-per-repo-email.sh +6 -6
index b2401cec3e..3a7723d16b 100755
@@ -47,24 +47,24 @@ test_expect_success 'set up rebase scenarios' '
 
 test_expect_success 'fast-forward rebase does not care about ident' '
 	git checkout -B tmp side-without-commit &&
-	git rebase master
+	git rebase main
 '
 
 test_expect_success 'non-fast-forward rebase refuses to write commits' '
 	test_when_finished "git rebase --abort || true" &&
 	git checkout -B tmp side-with-commit &&
-	test_must_fail git rebase master
+	test_must_fail git rebase main
 '
 
 test_expect_success 'fast-forward rebase does not care about ident (interactive)' '
 	git checkout -B tmp side-without-commit &&
-	git rebase -i master
+	git rebase -i main
 '
 
 test_expect_success 'non-fast-forward rebase refuses to write commits (interactive)' '
 	test_when_finished "git rebase --abort || true" &&
 	git checkout -B tmp side-with-commit &&
-	test_must_fail git rebase -i master
+	test_must_fail git rebase -i main
 '
 
 test_expect_success 'noop interactive rebase does not care about ident' '
@@ -75,14 +75,14 @@ test_expect_success 'noop interactive rebase does not care about ident' '
 test_expect_success REBASE_P \
 	'fast-forward rebase does not care about ident (preserve)' '
 	git checkout -B tmp side-without-commit &&
-	git rebase -p master
+	git rebase -p main
 '
 
 test_expect_success REBASE_P \
 	'non-fast-forward rebase refuses to write commits (preserve)' '
 	test_when_finished "git rebase --abort || true" &&
 	git checkout -B tmp side-with-commit &&
-	test_must_fail git rebase -p master
+	test_must_fail git rebase -p main
 '
 
 test_expect_success 'author.name overrides user.name' '
t/t7600-merge.sh +22 -22

152 lines not on this page · raw message

t/t7606-merge-custom.sh +1 -1
index 8e8c4d7246..81fb7c474c 100755
@@ -4,7 +4,7 @@ test_description="git merge
 
 Testing a custom strategy.
 
-*   (HEAD, master) Merge commit 'c3'
+*   (HEAD, main) Merge commit 'c3'
 |\
 | * (tag: c3) c3
 * | (tag: c1) c1
t/t7608-merge-messages.sh +18 -18
index 8e7e0a5865..d5e411daf5 100755
@@ -10,51 +10,51 @@ check_oneline() {
 }
 
 test_expect_success 'merge local branch' '
-	test_commit master-1 &&
+	test_commit main-1 &&
 	git checkout -b local-branch &&
 	test_commit branch-1 &&
-	git checkout master &&
-	test_commit master-2 &&
+	git checkout main &&
+	test_commit main-2 &&
 	git merge local-branch &&
 	check_oneline "Merge branch Qlocal-branchQ"
 '
 
 test_expect_success 'merge octopus branches' '
-	git checkout -b octopus-a master &&
+	git checkout -b octopus-a main &&
 	test_commit octopus-1 &&
-	git checkout -b octopus-b master &&
+	git checkout -b octopus-b main &&
 	test_commit octopus-2 &&
-	git checkout master &&
+	git checkout main &&
 	git merge octopus-a octopus-b &&
 	check_oneline "Merge branches Qoctopus-aQ and Qoctopus-bQ"
 '
 
 test_expect_success 'merge tag' '
-	git checkout -b tag-branch master &&
+	git checkout -b tag-branch main &&
 	test_commit tag-1 &&
-	git checkout master &&
-	test_commit master-3 &&
+	git checkout main &&
+	test_commit main-3 &&
 	git merge tag-1 &&
 	check_oneline "Merge tag Qtag-1Q"
 '
 
 test_expect_success 'ambiguous tag' '
-	git checkout -b ambiguous master &&
+	git checkout -b ambiguous main &&
 	test_commit ambiguous &&
-	git checkout master &&
-	test_commit master-4 &&
+	git checkout main &&
+	test_commit main-4 &&
 	git merge ambiguous &&
 	check_oneline "Merge tag QambiguousQ"
 '
 
 test_expect_success 'remote-tracking branch' '
-	git checkout -b remote master &&
+	git checkout -b remote main &&
 	test_commit remote-1 &&
-	git update-ref refs/remotes/origin/master remote &&
-	git checkout master &&
-	test_commit master-5 &&
-	git merge origin/master &&
-	check_oneline "Merge remote-tracking branch Qorigin/masterQ"
+	git update-ref refs/remotes/origin/main remote &&
+	git checkout main &&
+	test_commit main-5 &&
+	git merge origin/main &&
+	check_oneline "Merge remote-tracking branch Qorigin/mainQ"
 '
 
 test_done
t/t7610-mergetool.sh +87 -87

474 lines not on this page · raw message

t/t7611-merge-abort.sh +2 -2
index 7c84a518aa..8e95182566 100755
@@ -7,7 +7,7 @@ Set up repo with conflicting and non-conflicting branches:
 There are three files foo/bar/baz, and the following graph illustrates the
 content of these files in each commit:
 
-# foo/bar/baz --- foo/bar/bazz     <-- master
+# foo/bar/baz --- foo/bar/bazz     <-- main
 #             \
 #              --- foo/barf/bazf   <-- conflict_branch
 #               \
@@ -40,7 +40,7 @@ test_expect_success 'setup' '
 	git checkout -b clean_branch HEAD^ &&
 	echo bart > bar &&
 	git commit -a -m "clean" &&
-	git checkout master
+	git checkout main
 '
 
 pre_merge_head="$(git rev-parse HEAD)"
t/t7612-merge-verify-signatures.sh +1 -1
index a426f3a89a..6c52b6ac1e 100755
@@ -31,7 +31,7 @@ test_expect_success GPG 'create signed commits' '
 	echo 3 >baz && git add baz &&
 	test_tick && git commit -SB7227189 -m "untrusted on side" &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success GPG 'merge unsigned commit with verification' '
t/t7614-merge-signoff.sh +12 -12
index c1b8446f49..1e901224cd 100755
@@ -11,17 +11,17 @@ This test runs git merge --signoff and makes sure that it works.
 test_setup() {
 	# Expected commit message after merge --signoff
 	cat >expected-signed <<EOF &&
-Merge branch 'master' into other-branch
+Merge branch 'main' into other-branch
 
 Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/")
 EOF
 
 	# Expected commit message after merge without --signoff (or with --no-signoff)
 	cat >expected-unsigned <<EOF &&
-Merge branch 'master' into other-branch
+Merge branch 'main' into other-branch
 EOF
 
-	# Initial commit and feature branch to merge master into it.
+	# Initial commit and feature branch to merge main into it.
 	git commit --allow-empty -m "Initial empty commit" &&
 	git checkout -b other-branch &&
 	test_commit other-branch file1 1
@@ -38,30 +38,30 @@ test_expect_success 'setup' '
 
 # Test with --signoff flag
 test_expect_success 'git merge --signoff adds a sign-off line' '
-	git checkout master &&
-	test_commit master-branch-2 file2 2 &&
+	git checkout main &&
+	test_commit main-branch-2 file2 2 &&
 	git checkout other-branch &&
-	git merge master --signoff --no-edit &&
+	git merge main --signoff --no-edit &&
 	git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
 	test_cmp expected-signed actual
 '
 
 # Test without --signoff flag
 test_expect_success 'git merge does not add a sign-off line' '
-	git checkout master &&
-	test_commit master-branch-3 file3 3 &&
+	git checkout main &&
+	test_commit main-branch-3 file3 3 &&
 	git checkout other-branch &&
-	git merge master --no-edit &&
+	git merge main --no-edit &&
 	git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
 	test_cmp expected-unsigned actual
 '
 
 # Test for --no-signoff flag
 test_expect_success 'git merge --no-signoff flag cancels --signoff flag' '
-	git checkout master &&
-	test_commit master-branch-4 file4 4 &&
+	git checkout main &&
+	test_commit main-branch-4 file4 4 &&
 	git checkout other-branch &&
-	git merge master --no-edit --signoff --no-signoff &&
+	git merge main --no-edit --signoff --no-signoff &&
 	git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
 	test_cmp expected-unsigned actual
 '
t/t7701-repack-unpack-unreachable.sh +1 -1
index 48261ba080..852c81d13e 100755
@@ -22,7 +22,7 @@ test_expect_success '-A with -d option leaves unreachable objects unpacked' '
 	git commit -a -m more_content &&
 	csha1=$(git rev-parse HEAD^{commit}) &&
 	tsha1=$(git rev-parse HEAD^{tree}) &&
-	git checkout master &&
+	git checkout main &&
 	echo even more content >> file1 &&
 	test_tick &&
 	git commit -a -m even_more_content &&
t/t7800-difftool.sh +19 -19
index a578b35761..31e719e361 100755
@@ -35,23 +35,23 @@ test_expect_success 'basic usage requires no repo' '
 	test_i18ngrep ^usage: output
 '
 
-# Create a file on master and change it on branch
+# Create a file on main and change it on branch
 test_expect_success 'setup' '
-	echo master >file &&
+	echo main >file &&
 	git add file &&
 	git commit -m "added file" &&
 
-	git checkout -b branch master &&
+	git checkout -b branch main &&
 	echo branch >file &&
 	git commit -a -m "branch changed file" &&
-	git checkout master
+	git checkout main
 '
 
 # Configure a custom difftool.<tool>.cmd and use it
 test_expect_success 'custom commands' '
 	difftool_test_setup &&
 	test_config difftool.test-tool.cmd "cat \"\$REMOTE\"" &&
-	echo master >expect &&
+	echo main >expect &&
 	git difftool --no-prompt branch >actual &&
 	test_cmp expect actual &&
 
@@ -63,7 +63,7 @@ test_expect_success 'custom commands' '
 
 test_expect_success 'custom tool commands override built-ins' '
 	test_config difftool.vimdiff.cmd "cat \"\$REMOTE\"" &&
-	echo master >expect &&
+	echo main >expect &&
 	git difftool --tool vimdiff --no-prompt branch >actual &&
 	test_cmp expect actual
 '
@@ -311,21 +311,21 @@ test_expect_success 'difftool.<tool>.path' '
 
 test_expect_success 'difftool --extcmd=cat' '
 	echo branch >expect &&
-	echo master >>expect &&
+	echo main >>expect &&
 	git difftool --no-prompt --extcmd=cat branch >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'difftool --extcmd cat' '
 	echo branch >expect &&
-	echo master >>expect &&
+	echo main >>expect &&
 	git difftool --no-prompt --extcmd=cat branch >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'difftool -x cat' '
 	echo branch >expect &&
-	echo master >>expect &&
+	echo main >>expect &&
 	git difftool --no-prompt -x cat branch >actual &&
 	test_cmp expect actual
 '
@@ -338,7 +338,7 @@ test_expect_success 'difftool --extcmd echo arg1' '
 '
 
 test_expect_success 'difftool --extcmd cat arg1' '
-	echo master >expect &&
+	echo main >expect &&
 	git difftool --no-prompt \
 		--extcmd sh\ -c\ \"cat\ \$1\" branch >actual &&
 	test_cmp expect actual
@@ -351,7 +351,7 @@ test_expect_success 'difftool --extcmd cat arg2' '
 	test_cmp expect actual
 '
 
-# Create a second file on master and a different version on branch
+# Create a second file on main and a different version on branch
 test_expect_success 'setup with 2 files different' '
 	echo m2 >file2 &&
 	git add file2 &&
@@ -361,7 +361,7 @@ test_expect_success 'setup with 2 files different' '
 	echo br2 >file2 &&
 	git add file2 &&
 	git commit -a -m "branch changed file2" &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'say no to the first file' '
@@ -369,14 +369,14 @@ test_expect_success 'say no to the first file' '
 	git difftool -x cat branch <input >output &&
 	grep m2 output &&
 	grep br2 output &&
-	! grep master output &&
+	! grep main output &&
 	! grep branch output
 '
 
 test_expect_success 'say no to the second file' '
 	(echo && echo n) >input &&
 	git difftool -x cat branch <input >output &&
-	grep master output &&
+	grep main output &&
 	grep branch output &&
 	! grep m2 output &&
 	! grep br2 output
@@ -384,7 +384,7 @@ test_expect_success 'say no to the second file' '
 
 test_expect_success 'ending prompt input with EOF' '
 	git difftool -x cat branch </dev/null >output &&
-	! grep master output &&
+	! grep main output &&
 	! grep branch output &&
 	! grep m2 output &&
 	! grep br2 output
@@ -396,9 +396,9 @@ test_expect_success 'difftool --tool-help' '
 '
 
 test_expect_success 'setup change in subdirectory' '
-	git checkout master &&
+	git checkout main &&
 	mkdir sub &&
-	echo master >sub/sub &&
+	echo main >sub/sub &&
 	git add sub/sub &&
 	git commit -m "added sub/sub" &&
 	git tag v1 &&
@@ -526,7 +526,7 @@ run_dir_diff_test 'difftool --dir-diff from subdirectory with GIT_DIR set' '
 run_dir_diff_test 'difftool --dir-diff when worktree file is missing' '
 	test_when_finished git reset --hard &&
 	rm file2 &&
-	git difftool --dir-diff $symlinks --extcmd ls branch master >output &&
+	git difftool --dir-diff $symlinks --extcmd ls branch main >output &&
 	grep file2 output
 '
 
@@ -543,7 +543,7 @@ run_dir_diff_test 'difftool --dir-diff with unmerged files' '
 	echo b >>file &&
 	git add file &&
 	git commit -m conflict-b &&
-	git checkout master &&
+	git checkout main &&
 	git merge conflict-a &&
 	test_must_fail git merge conflict-b &&
 	cat >expect <<-EOF &&
t/t7810-grep.sh +14 -14
index 991d5bd9c0..bee57a4e08 100755
@@ -1206,19 +1206,19 @@ test_expect_success 'grep -e -- -- path' '
 '
 
 test_expect_success 'dashdash disambiguates rev as rev' '
-	test_when_finished "rm -f master" &&
-	echo content >master &&
-	echo master:hello.c >expect &&
-	git grep -l o master -- hello.c >actual &&
+	test_when_finished "rm -f main" &&
+	echo content >main &&
+	echo main:hello.c >expect &&
+	git grep -l o main -- hello.c >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'dashdash disambiguates pathspec as pathspec' '
-	test_when_finished "git rm -f master" &&
-	echo content >master &&
-	git add master &&
-	echo master:content >expect &&
-	git grep o -- master >actual &&
+	test_when_finished "git rm -f main" &&
+	echo content >main &&
+	git add main &&
+	echo main:content >expect &&
+	git grep o -- main >actual &&
 	test_cmp expect actual
 '
 
@@ -1254,15 +1254,15 @@ test_expect_success 'grep --no-index pattern -- path' '
 '
 
 test_expect_success 'grep --no-index complains of revs' '
-	test_must_fail git grep --no-index o master -- 2>err &&
+	test_must_fail git grep --no-index o main -- 2>err &&
 	test_i18ngrep "cannot be used with revs" err
 '
 
 test_expect_success 'grep --no-index prefers paths to revs' '
-	test_when_finished "rm -f master" &&
-	echo content >master &&
-	echo master:content >expect &&
-	git grep --no-index o master >actual &&
+	test_when_finished "rm -f main" &&
+	echo content >main &&
+	echo main:content >expect &&
+	git grep --no-index o main >actual &&
 	test_cmp expect actual
 '
 
t/test-lib.sh +2 -2
index 815d7b21fe..2ef51a4f3f 100644
@@ -257,13 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-3404|4013|5310|6300|7064)
+3404|4013|5310|6300|7064|7817)
 	# Avoid conflicts with patch series that are cooking at the same time
 	# as the patch series changing the default of `init.defaultBranch`.
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-6]*|7[0-4]*)
+[0-7]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#0 lore raw

cover Use main as default branch name

This is the big one. This changes the default of init.defaultBranch to main, reflecting what many open source projects already did (which was followed by GitHub, Azure Repos and others).

Instead of one huge patch that reflects essentially a search-and-replace in the test suite, this patch series splits the changes up into chunks that are intended to be smaller than 100kB so that they are not rejected by the Git mailing list. Interspersed between those changes are adjustments e.g. in alignment, to make it easier to review (or recreate) the search-and-replace patches.

Note that this branch is based on next, mostly because it would otherwise conflict with en/merge-tests, jk/diff-release-filespec-fix and ds/maintenance-part-3.

The semantic conflict with pk/subsub-fetch-fix consists of just a single line in t/t5526-fetch-submodules.sh needing s/master/main/g.

To avoid even more conflicts with topics that did not even make it to seen yet, this patch series specifically excludes t3404, t4013, t5310, t6300, t7064, t7817, t9902: in those test scripts, we will still use master for the time being. Once the topics in question have settled, I will send the appropriate follow-up patches to adjust them to use main instead.

Don Goodman-Wilson (1):
Change the default branch name to main

Johannes Schindelin (27):
t0060: preemptively adjust alignment
t[01]*: adjust the references to the default branch name "main" t2*: adjust the references to the default branch name "main" t3[0-3]*: adjust the references to the default branch name "main"
t3416: preemptively adjust alignment in a comment
t34*: adjust the references to the default branch name "main" t3[5-9]*: adjust the references to the default branch name "main" t4*: adjust the references to the default branch name "main"
t5323: prepare centered comment for master -> main t5[0-4]*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing master with main t550*: adjust the references to the default branch name "main" t551*: adjust the references to the default branch name "main" t55[23]*: adjust the references to the default branch name "main" t55[4-9]*: adjust the references to the default branch name "main" t5[6-9]*: adjust the references to the default branch name "main" t6[0-3]*: adjust the references to the default branch name "main" t64*: preemptively adjust alignment to prepare for master -> main t6[4-9]*: adjust the references to the default branch name "main" t7[0-4]*: adjust the references to the default branch name "main" t7[5-9]*: adjust the references to the default branch name "main" t8*: adjust the references to the default branch name "main" t9[0-4]*: adjust the references to the default branch name "main" t9[5-7]*: adjust the references to the default branch name "main" tests(git-p4): transition to the default branch name main t99*: adjust the references to the default branch name "main"
tests: drop prereq PREPARE_FOR_MAIN_BRANCH where no longer needed

 refs.c                                        |   2 +-
 t/annotate-tests.sh                           |   8 +-
 t/lib-cvs.sh                                  |   2 +-
 t/lib-submodule-update.sh                     |   2 +-
 t/t0002-gitfile.sh                            |   6 +-
 t/t0020-crlf.sh                               |   8 +-
 t/t0021-conversion.sh                         |  40 +-
 t/t0027-auto-crlf.sh                          |   4 +-
 t/t0028-working-tree-encoding.sh              |   4 +-
 t/t0041-usage.sh                              |  10 +-
 t/t0050-filesystem.sh                         |   6 +-
 t/t0060-path-utils.sh                         |   4 +-
 t/t0100-previous.sh                           |  18 +-
 t/t1004-read-tree-m-u-wf.sh                   |  40 +-
 t/t1008-read-tree-overlay.sh                  |   2 +-
 t/t1009-read-tree-new-index.sh                |   4 +-
 t/t1011-read-tree-sparse-checkout.sh          |   2 +-
 t/t1021-rerere-in-workdir.sh                  |   2 +-
 t/t1090-sparse-checkout-scope.sh              |  10 +-
 t/t1091-sparse-checkout-builtin.sh            |   2 +-
 t/t1300-config.sh                             |   8 +-
 t/t1301-shared-repo.sh                        |   4 +-
 t/t1305-config-include.sh                     |   2 +-
 t/t1309-early-config.sh                       |   4 +-
 t/t1400-update-ref.sh                         |  72 +--
 t/t1402-check-ref-format.sh                   |  28 +-
 t/t1403-show-ref.sh                           |  18 +-
 t/t1405-main-ref-store.sh                     |  42 +-
 t/t1406-submodule-ref-store.sh                |  30 +-
 t/t1407-worktree-ref-store.sh                 |  32 +-
 t/t1408-packed-refs.sh                        |  12 +-
 t/t1410-reflog.sh                             |  56 +-
 t/t1411-reflog-show.sh                        |   2 +-
 t/t1413-reflog-detach.sh                      |  24 +-
 t/t1414-reflog-walk.sh                        |  12 +-
 t/t1416-ref-transaction-hooks.sh              |  10 +-
 t/t1430-bad-ref-name.sh                       |  52 +-
 t/t1450-fsck.sh                               |   2 +-
 t/t1500-rev-parse.sh                          |   4 +-
 t/t1503-rev-parse-verify.sh                   |  28 +-
 t/t1505-rev-parse-last.sh                     |   8 +-
 t/t1506-rev-parse-diagnosis.sh                |   4 +-
 t/t1507-rev-parse-upstream.sh                 |  40 +-
 t/t1508-at-combinations.sh                    |  10 +-
 t/t1511-rev-parse-caret.sh                    |  26 +-
 t/t1512-rev-parse-disambiguation.sh           |   2 +-
 t/t1513-rev-parse-prefix.sh                   |   4 +-
 t/t1514-rev-parse-push.sh                     |  16 +-
 t/t1700-split-index.sh                        |   2 +-
 t/t2007-checkout-symlink.sh                   |  10 +-
 t/t2009-checkout-statinfo.sh                  |   8 +-
 t/t2010-checkout-ambiguous.sh                 |   4 +-
 t/t2011-checkout-invalid-head.sh              |  16 +-
 t/t2012-checkout-last.sh                      |  48 +-
 t/t2015-checkout-unborn.sh                    |   2 +-
 t/t2017-checkout-orphan.sh                    |  44 +-
 t/t2020-checkout-detach.sh                    |  28 +-
 t/t2022-checkout-paths.sh                     |  22 +-
 t/t2023-checkout-m.sh                         |  10 +-
 t/t2024-checkout-dwim.sh                      |  70 +--
 t/t2027-checkout-track.sh                     |   6 +-
 t/t2030-unresolve-info.sh                     |   6 +-
 t/t2060-switch.sh                             |  30 +-
 t/t2070-restore.sh                            |   4 +-
 t/t2106-update-index-assume-unchanged.sh      |   2 +-
 t/t2400-worktree-add.sh                       |  66 +--
 t/t2401-worktree-prune.sh                     |   2 +-
 t/t2402-worktree-list.sh                      |  20 +-
 t/t2405-worktree-submodule.sh                 |   6 +-
 t/t3040-subprojects-basic.sh                  |   2 +-
 t/t3200-branch.sh                             | 248 ++++-----
 t/t3201-branch-contains.sh                    |  82 +--
 t/t3202-show-branch-octopus.sh                |   2 +-
 t/t3203-branch-output.sh                      |  40 +-
 t/t3204-branch-name-interpretation.sh         |   6 +-
 t/t3205-branch-color.sh                       |   8 +-
 t/t3206-range-diff.sh                         |  40 +-
 t/t3206/history.export                        |   2 +-
 t/t3210-pack-refs.sh                          |   4 +-
 t/t3211-peel-ref.sh                           |   4 +-
 t/t3301-notes.sh                              |   6 +-
 t/t3302-notes-index-expensive.sh              |   2 +-
 t/t3303-notes-subtrees.sh                     |   8 +-
 t/t3304-notes-mixed.sh                        |   8 +-
 t/t3308-notes-merge.sh                        |   2 +-
 t/t3320-notes-merge-worktrees.sh              |   4 +-
 t/t3400-rebase.sh                             |  60 +--
 t/t3402-rebase-merge.sh                       |  44 +-
 t/t3403-rebase-skip.sh                        |   6 +-
 t/t3405-rebase-malformed.sh                   |   8 +-
 t/t3406-rebase-message.sh                     |  24 +-
 t/t3407-rebase-abort.sh                       |  18 +-
 t/t3408-rebase-multi-line.sh                  |   2 +-
 t/t3409-rebase-preserve-merges.sh             |  10 +-
 t/t3412-rebase-root.sh                        |  28 +-
 t/t3413-rebase-hook.sh                        |  42 +-
 t/t3415-rebase-autosquash.sh                  |   2 +-
 t/t3416-rebase-onto-threedots.sh              |  54 +-
 t/t3418-rebase-continue.sh                    |  24 +-
 t/t3419-rebase-patch-id.sh                    |  12 +-
 t/t3420-rebase-autostash.sh                   |   8 +-
 t/t3423-rebase-reword.sh                      |   6 +-
 t/t3427-rebase-subtree.sh                     |  20 +-
 t/t3430-rebase-merges.sh                      |  16 +-
 t/t3431-rebase-fork-point.sh                  |  32 +-
 t/t3432-rebase-fast-forward.sh                |  34 +-
 t/t3434-rebase-i18n.sh                        |   8 +-
 t/t3435-rebase-gpg-sign.sh                    |   4 +-
 t/t3436-rebase-more-options.sh                |   2 +-
 t/t3500-cherry.sh                             |  12 +-
 t/t3501-revert-cherry-pick.sh                 |   4 +-
 t/t3502-cherry-pick-merge.sh                  |   2 +-
 t/t3503-cherry-pick-root.sh                   |  10 +-
 t/t3504-cherry-pick-rerere.sh                 |  24 +-
 t/t3505-cherry-pick-empty.sh                  |  24 +-
 t/t3506-cherry-pick-ff.sh                     |   8 +-
 t/t3507-cherry-pick-conflict.sh               |   2 +-
 t/t3508-cherry-pick-many-commits.sh           |  38 +-
 t/t3509-cherry-pick-merge-df.sh               |   2 +-
 t/t3512-cherry-pick-submodule.sh              |   2 +-
 t/t3600-rm.sh                                 |  10 +-
 t/t3701-add-interactive.sh                    |   4 +-
 t/t3901-i18n-patch.sh                         |  40 +-
 t/t3903-stash.sh                              |  32 +-
 t/t3910-mac-os-precompose.sh                  |   6 +-
 t/t4014-format-patch.sh                       | 176 +++---
 t/t4015-diff-whitespace.sh                    |   2 +-
 t/t4017-diff-retval.sh                        |   2 +-
 t/t4038-diff-combined.sh                      |  14 +-
 t/t4041-diff-submodule-option.sh              |   2 +-
 t/t4048-diff-combined-binary.sh               |  10 +-
 t/t4052-stat-output.sh                        |   4 +-
 t/t4056-diff-order.sh                         |   2 +-
 t/t4057-diff-combined-paths.sh                |  20 +-
 t/t4061-diff-indent.sh                        |  24 +-
 t/t4066-diff-emit-delay.sh                    |   2 +-
 t/t4068-diff-symmetric-merge-base.sh          |  48 +-
 t/t4103-apply-binary.sh                       |  36 +-
 t/t4108-apply-threeway.sh                     |  14 +-
 t/t4121-apply-diffs.sh                        |   2 +-
 t/t4122-apply-symlink-inside.sh               |   6 +-
 t/t4150-am.sh                                 |  26 +-
 t/t4200-rerere.sh                             |  20 +-
 t/t4201-shortlog.sh                           |   2 +-
 t/t4202-log.sh                                | 106 ++--
 t/t4203-mailmap.sh                            |   2 +-
 t/t4204-patch-id.sh                           |  26 +-
 t/t4207-log-decoration-colors.sh              |   6 +-
 t/t4208-log-magic-pathspec.sh                 |   4 +-
 t/t4211/history.export                        |   2 +-
 t/t4214-log-graph-octopus.sh                  |   2 +-
 t/t4216-log-bloom.sh                          |   4 +-
 t/t4253-am-keep-cr-dos.sh                     |  20 +-
 t/t4257-am-interactive.sh                     |   2 +-
 t/t5150-request-pull.sh                       |  34 +-
 t/t5304-prune.sh                              |   2 +-
 t/t5305-include-tag.sh                        |   2 +-
 t/t5312-prune-corruption.sh                   |  16 +-
 t/t5317-pack-objects-filter-objects.sh        |   2 +-
 t/t5322-pack-objects-sparse.sh                |   2 +-
 t/t5323-pack-redundant.sh                     |  66 +--
 t/t5400-send-pack.sh                          |  60 +--
 t/t5401-update-hooks.sh                       |  24 +-
 t/t5402-post-merge-hook.sh                    |   2 +-
 t/t5403-post-checkout-hook.sh                 |   6 +-
 t/t5404-tracking-branches.sh                  |   8 +-
 t/t5405-send-pack-rewind.sh                   |   6 +-
 t/t5407-post-rewrite-hook.sh                  |   2 +-
 t/t5410-receive-pack-alternates.sh            |   4 +-
 t/t5500-fetch-pack.sh                         |  28 +-
 t/t5501-fetch-push-alternates.sh              |   4 +-
 t/t5502-quickfetch.sh                         |   6 +-
 t/t5503-tagfollow.sh                          |  12 +-
 t/t5504-fetch-receive-strict.sh               |  20 +-
 t/t5505-remote.sh                             | 148 +++---
 t/t5506-remote-groups.sh                      |   4 +-
 t/t5509-fetch-push-namespaces.sh              |  30 +-
 t/t5510-fetch.sh                              | 162 +++---
 t/t5511-refspec.sh                            |  12 +-
 t/t5512-ls-remote.sh                          |  26 +-
 t/t5514-fetch-multiple.sh                     |  30 +-
 t/t5516-fetch-push.sh                         | 500 +++++++++---------
 t/t5517-push-mirror.sh                        | 124 ++---
 t/t5518-fetch-exit-status.sh                  |   6 +-
 t/t5519-push-alternates.sh                    |  12 +-
 t/t5520-pull.sh                               |  30 +-
 t/t5521-pull-options.sh                       |  16 +-
 t/t5523-push-upstream.sh                      |  30 +-
 t/t5526-fetch-submodules.sh                   |  48 +-
 t/t5527-fetch-odd-refs.sh                     |  14 +-
 t/t5528-push-default.sh                       |  98 ++--
 t/t5529-push-errors.sh                        |   2 +-
 t/t5530-upload-pack-error.sh                  |   2 +-
 t/t5531-deep-submodule-push.sh                | 188 +++----
 t/t5533-push-cas.sh                           | 142 ++---
 t/t5534-push-signed.sh                        |   4 +-
 t/t5537-fetch-shallow.sh                      |  30 +-
 t/t5538-push-shallow.sh                       |  22 +-
 t/t5539-fetch-http-shallow.sh                 |  14 +-
 t/t5540-http-push-webdav.sh                   |   8 +-
 t/t5541-http-push-smart.sh                    |  40 +-
 t/t5542-push-http-shallow.sh                  |   8 +-
 t/t5543-atomic-push.sh                        |  80 +--
 t/t5545-push-options.sh                       |  62 +--
 t/t5548-push-porcelain.sh                     |  64 +--
 t/t5550-http-fetch-dumb.sh                    |  20 +-
 t/t5551-http-fetch-smart.sh                   |  20 +-
 t/t5552-skipping-fetch-negotiator.sh          |   2 +-
 t/t5553-set-upstream.sh                       |  82 +--
 t/t5561-http-backend.sh                       |   4 +-
 t/t556x_common                                |   8 +-
 t/t5570-git-daemon.sh                         |  16 +-
 t/t5571-pre-push-hook.sh                      |   4 +-
 t/t5572-pull-submodule.sh                     |   4 +-
 t/t5580-unc-paths.sh                          |   2 +-
 t/t5581-http-curl-verbose.sh                  |   2 +-
 t/t5582-fetch-negative-refspec.sh             |  22 +-
 t/t5601-clone.sh                              |   4 +-
 t/t5604-clone-reference.sh                    |  12 +-
 t/t5605-clone-local.sh                        |  10 +-
 t/t5606-clone-options.sh                      |   8 +-
 t/t5607-clone-bundle.sh                       |  14 +-
 t/t5608-clone-2gb.sh                          |   2 +-
 t/t5609-clone-branch.sh                       |   6 +-
 t/t5610-clone-detached.sh                     |   4 +-
 t/t5611-clone-config.sh                       |  16 +-
 t/t5612-clone-refspec.sh                      |  42 +-
 t/t5614-clone-submodules-shallow.sh           |   2 +-
 t/t5616-partial-clone.sh                      |  50 +-
 t/t5617-clone-submodules-remote.sh            |   6 +-
 t/t5700-protocol-v1.sh                        |  16 +-
 t/t5701-git-serve.sh                          |  16 +-
 t/t5702-protocol-v2.sh                        |  50 +-
 t/t5703-upload-pack-ref-in-want.sh            |  60 +--
 t/t5801-remote-helpers.sh                     |  24 +-
 t/t6000-rev-list-misc.sh                      |   2 +-
 t/t6001-rev-list-graft.sh                     |   2 +-
 t/t6004-rev-list-path-optim.sh                |  14 +-
 t/t6006-rev-list-format.sh                    |  14 +-
 t/t6007-rev-list-cherry-pick-file.sh          |   4 +-
 t/t6008-rev-list-submodule.sh                 |   2 +-
 t/t6009-rev-list-parent.sh                    |   6 +-
 t/t6012-rev-list-simplify.sh                  |   8 +-
 t/t6013-rev-list-reverse-parents.sh           |  10 +-
 t/t6016-rev-list-graph-simplify-history.sh    |   2 +-
 t/t6017-rev-list-stdin.sh                     |   8 +-
 t/t6018-rev-list-glob.sh                      |  50 +-
 t/t6019-rev-list-ancestry-path.sh             |   6 +-
 t/t6030-bisect-porcelain.sh                   |  10 +-
 t/t6040-tracking-info.sh                      |  54 +-
 t/t6050-replace.sh                            |  10 +-
 t/t6101-rev-parse-parents.sh                  |   2 +-
 t/t6110-rev-list-sparse.sh                    |   2 +-
 t/t6111-rev-list-treesame.sh                  |   6 +-
 t/t6112-rev-list-filters-objects.sh           |  14 +-
 t/t6120-describe.sh                           |  20 +-
 t/t6200-fmt-merge-msg.sh                      |  50 +-
 t/t6302-for-each-ref-filter.sh                |  58 +-
 t/t6400-merge-df.sh                           |   6 +-
 t/t6402-merge-rename.sh                       |  46 +-
 t/t6404-recursive-merge.sh                    |   4 +-
 t/t6405-merge-symlinks.sh                     |  14 +-
 t/t6406-merge-attr.sh                         |  24 +-
 t/t6407-merge-binary.sh                       |   6 +-
 t/t6409-merge-subtree.sh                      |  16 +-
 t/t6411-merge-filemode.sh                     |  10 +-
 t/t6412-merge-large-rename.sh                 |   6 +-
 t/t6413-merge-crlf.sh                         |   2 +-
 t/t6414-merge-rename-nocruft.sh               |   2 +-
 t/t6415-merge-dir-to-symlink.sh               |  22 +-
 t/t6416-recursive-corner-cases.sh             |  28 +-
 t/t6417-merge-ours-theirs.sh                  |  28 +-
 t/t6418-merge-text-auto.sh                    |  12 +-
 t/t6419-merge-ignorecase.sh                   |  10 +-
 t/t6422-merge-rename-corner-cases.sh          |  12 +-
 t/t6425-merge-rename-delete.sh                |   2 +-
 t/t6427-diff3-conflict-markers.sh             |  14 +-
 t/t6430-merge-recursive.sh                    |  18 +-
 t/t6432-merge-recursive-space-options.sh      |   6 +-
 t/t6433-merge-toplevel.sh                     |   8 +-
 t/t6434-merge-recursive-rename-options.sh     |   6 +-
 t/t6436-merge-overwrite.sh                    |   2 +-
 t/t6437-submodule-merge.sh                    |  14 +-
 t/t6439-merge-co-error-msgs.sh                |   6 +-
 t/t6501-freshen-objects.sh                    |   2 +-
 t/t7003-filter-branch.sh                      |  40 +-
 t/t7004-tag.sh                                |   8 +-
 t/t7030-verify-tag.sh                         |   2 +-
 t/t7060-wtstatus.sh                           |  26 +-
 t/t7063-status-untracked-cache.sh             |  14 +-
 t/t7102-reset.sh                              |   6 +-
 t/t7113-post-index-change-hook.sh             |   2 +-
 t/t7201-co.sh                                 | 110 ++--
 t/t7400-submodule-basic.sh                    |  20 +-
 t/t7403-submodule-sync.sh                     |  10 +-
 t/t7406-submodule-update.sh                   |  38 +-
 t/t7407-submodule-foreach.sh                  |  24 +-
 t/t7409-submodule-detached-work-tree.sh       |   8 +-
 t/t7417-submodule-path-url.sh                 |   2 +-
 t/t7501-commit-basic-functionality.sh         |   2 +-
 t/t7502-commit-porcelain.sh                   |  12 +-
 ...3-pre-commit-and-pre-merge-commit-hooks.sh |  42 +-
 t/t7504-commit-msg-hook.sh                    |  24 +-
 t/t7505-prepare-commit-msg-hook.sh            |  20 +-
 t/t7508-status.sh                             |  58 +-
 t/t7510-signed-commit.sh                      |   2 +-
 t/t7512-status-help.sh                        |  40 +-
 t/t7517-per-repo-email.sh                     |  12 +-
 t/t7600-merge.sh                              |  44 +-
 t/t7606-merge-custom.sh                       |   2 +-
 t/t7608-merge-messages.sh                     |  36 +-
 t/t7610-mergetool.sh                          | 174 +++---
 t/t7611-merge-abort.sh                        |   4 +-
 t/t7612-merge-verify-signatures.sh            |   2 +-
 t/t7614-merge-signoff.sh                      |  24 +-
 t/t7701-repack-unpack-unreachable.sh          |   2 +-
 t/t7800-difftool.sh                           |  38 +-
 t/t7810-grep.sh                               |  28 +-
 t/t8001-annotate.sh                           |   2 +-
 t/t8003-blame-corner-cases.sh                 |   4 +-
 t/t8004-blame-with-conflicts.sh               |  14 +-
 t/t9001-send-email.sh                         |  28 +-
 t/t9100-git-svn-basic.sh                      |   2 +-
 t/t9145-git-svn-master-branch.sh              |   6 +-
 t/t9151-svn-mergeinfo.sh                      |   2 +-
 t/t9155-git-svn-fetch-deleted-tag.sh          |   2 +-
 t/t9156-git-svn-fetch-deleted-tag-2.sh        |   6 +-
 t/t9163-git-svn-reset-clears-caches.sh        |   2 +-
 t/t9169-git-svn-dcommit-crlf.sh               |   2 +-
 t/t9300-fast-import.sh                        |  82 +--
 t/t9301-fast-import-notes.sh                  |  14 +-
 t/t9302-fast-import-unpack-limit.sh           |  16 +-
 t/t9350-fast-export.sh                        |  86 +--
 t/t9351-fast-export-anonymize.sh              |   4 +-
 t/t9400-git-cvsserver-server.sh               |  32 +-
 t/t9401-git-cvsserver-crlf.sh                 |  16 +-
 t/t9402-git-cvsserver-refs.sh                 |   8 +-
 t/t9500-gitweb-standalone-no-errors.sh        |  20 +-
 t/t9501-gitweb-standalone-http-status.sh      |  14 +-
 t/t9502-gitweb-standalone-parse-output.sh     |  16 +-
 t/t9600-cvsimport.sh                          |   2 +-
 t/t9601-cvsimport-vendor-branch.sh            |  16 +-
 t/t9602-cvsimport-branches-tags.sh            |   4 +-
 t/t9603-cvsimport-patchsets.sh                |   8 +-
 t/t9800-git-p4-basic.sh                       |   2 +-
 t/t9801-git-p4-branch.sh                      |  16 +-
 t/t9806-git-p4-options.sh                     |  18 +-
 t/t9807-git-p4-submit.sh                      |   2 +-
 t/t9811-git-p4-label-import.sh                |   2 +-
 t/t9903-bash-prompt.sh                        | 114 ++--
 t/test-lib.sh                                 |  13 +
 351 files changed, 3903 insertions(+), 3890 deletions(-)

base-commit: aff20da3a209088e7f8f3632077fa11b86453d67
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-762%2Fdscho%2Fuse-main-as-default-branch-name-v1
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-762/dscho/use-main-as-default-branch-name-v1
Pull-Request: https://github.com/gitgitgadget/git/pull/762

Signature · 1 line
gitgitgadget
#22 lore raw

PATCH 19/28 t6[4-9]*: adjust the references to the default branch name "main"

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t6[4-9]*.sh)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t6400-merge-df.sh                       |  6 +--
 t/t6402-merge-rename.sh                   | 46 +++++++++++------------
 t/t6404-recursive-merge.sh                |  4 +-
 t/t6405-merge-symlinks.sh                 | 14 +++----
 t/t6406-merge-attr.sh                     | 24 ++++++------
 t/t6407-merge-binary.sh                   |  6 +--
 t/t6409-merge-subtree.sh                  | 16 ++++----
 t/t6411-merge-filemode.sh                 | 10 ++---
 t/t6412-merge-large-rename.sh             |  6 +--
 t/t6413-merge-crlf.sh                     |  2 +-
 t/t6414-merge-rename-nocruft.sh           |  2 +-
 t/t6415-merge-dir-to-symlink.sh           | 22 +++++------
 t/t6416-recursive-corner-cases.sh         | 28 +++++++-------
 t/t6417-merge-ours-theirs.sh              | 28 +++++++-------
 t/t6418-merge-text-auto.sh                | 12 +++---
 t/t6419-merge-ignorecase.sh               | 10 ++---
 t/t6422-merge-rename-corner-cases.sh      | 12 +++---
 t/t6425-merge-rename-delete.sh            |  2 +-
 t/t6427-diff3-conflict-markers.sh         | 14 +++----
 t/t6430-merge-recursive.sh                | 18 ++++-----
 t/t6432-merge-recursive-space-options.sh  |  6 +--
 t/t6433-merge-toplevel.sh                 |  8 ++--
 t/t6434-merge-recursive-rename-options.sh |  6 +--
 t/t6436-merge-overwrite.sh                |  2 +-
 t/t6437-submodule-merge.sh                | 14 +++----
 t/t6439-merge-co-error-msgs.sh            |  6 +--
 t/t6501-freshen-objects.sh                |  2 +-
 t/test-lib.sh                             |  2 +-
 28 files changed, 164 insertions(+), 164 deletions(-)
t/t6400-merge-df.sh +3 -3
index 9da0838216..f7907df3af 100755
@@ -24,12 +24,12 @@ test_expect_success 'prepare repository' '
 '
 
 test_expect_success 'Merge with d/f conflicts' '
-	test_expect_code 1 git merge -m "merge msg" master
+	test_expect_code 1 git merge -m "merge msg" main
 '
 
 test_expect_success 'F/D conflict' '
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 	rm .git/index &&
 
 	mkdir before &&
@@ -47,7 +47,7 @@ test_expect_success 'F/D conflict' '
 	git add . &&
 	git commit -m para &&
 
-	git merge master
+	git merge main
 '
 
 test_expect_success 'setup modify/delete + directory/file conflict' '
t/t6402-merge-rename.sh +23 -23

164 lines not on this page · raw message

t/t6404-recursive-merge.sh +2 -2
index b1c3d4dda4..410a17865b 100755
@@ -19,11 +19,11 @@ test_expect_success 'setup tests' '
 	git add a1 &&
 	GIT_AUTHOR_DATE="2006-12-12 23:00:00" git commit -m 1 a1 &&
 
-	git checkout -b A master &&
+	git checkout -b A main &&
 	echo A >a1 &&
 	GIT_AUTHOR_DATE="2006-12-12 23:00:01" git commit -m A a1 &&
 
-	git checkout -b B master &&
+	git checkout -b B main &&
 	echo B >a1 &&
 	GIT_AUTHOR_DATE="2006-12-12 23:00:02" git commit -m B a1 &&
 
t/t6405-merge-symlinks.sh +7 -7
index 6c0a90d044..160c2c10f6 100755
@@ -19,7 +19,7 @@ test_expect_success 'setup' '
 	git branch b-file &&
 	l=$(printf file | git hash-object -t blob -w --stdin) &&
 	echo "120000 $l	symlink" | git update-index --index-info &&
-	git commit -m master &&
+	git commit -m main &&
 	git checkout b-symlink &&
 	l=$(printf file-different | git hash-object -t blob -w --stdin) &&
 	echo "120000 $l	symlink" | git update-index --index-info &&
@@ -30,28 +30,28 @@ test_expect_success 'setup' '
 	git commit -m b-file
 '
 
-test_expect_success 'merge master into b-symlink, which has a different symbolic link' '
+test_expect_success 'merge main into b-symlink, which has a different symbolic link' '
 	git checkout b-symlink &&
-	test_must_fail git merge master
+	test_must_fail git merge main
 '
 
 test_expect_success 'the merge result must be a file' '
 	test_path_is_file symlink
 '
 
-test_expect_success 'merge master into b-file, which has a file instead of a symbolic link' '
+test_expect_success 'merge main into b-file, which has a file instead of a symbolic link' '
 	git reset --hard &&
 	git checkout b-file &&
-	test_must_fail git merge master
+	test_must_fail git merge main
 '
 
 test_expect_success 'the merge result must be a file' '
 	test_path_is_file symlink
 '
 
-test_expect_success 'merge b-file, which has a file instead of a symbolic link, into master' '
+test_expect_success 'merge b-file, which has a file instead of a symbolic link, into main' '
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 	test_must_fail git merge b-file
 '
 
t/t6406-merge-attr.sh +12 -12
index 76a55f838c..c559b5a3e6 100755
@@ -19,10 +19,10 @@ test_expect_success setup '
 	git branch side &&
 	for f in text binary union
 	do
-		echo Master >>$f && git add $f || return 1
+		echo Main >>$f && git add $f || return 1
 	done &&
 	test_tick &&
-	git commit -m Master &&
+	git commit -m Main &&
 
 	git checkout side &&
 	for f in text binary union
@@ -64,7 +64,7 @@ test_expect_success merge '
 		echo "union merge=union"
 	} >.gitattributes &&
 
-	if git merge master
+	if git merge main
 	then
 		echo Gaah, should have conflicted
 		false
@@ -87,7 +87,7 @@ test_expect_success 'check merge result in working tree' '
 	grep "<<<<<<<" text &&
 	cmp binary-orig binary &&
 	! grep "<<<<<<<" union &&
-	grep Master union &&
+	grep Main union &&
 	grep Side union
 
 '
@@ -115,13 +115,13 @@ test_expect_success 'custom merge backend' '
 	git config --replace-all \
 	merge.custom.name "custom merge driver for testing" &&
 
-	git merge master &&
+	git merge main &&
 
 	cmp binary union &&
 	sed -e 1,3d text >check-1 &&
-	o=$(git unpack-file master^:text) &&
+	o=$(git unpack-file main^:text) &&
 	a=$(git unpack-file side^:text) &&
-	b=$(git unpack-file master:text) &&
+	b=$(git unpack-file main:text) &&
 	sh -c "./custom-merge $o $a $b 0 text" &&
 	sed -e 1,3d $a >check-2 &&
 	cmp check-1 check-2 &&
@@ -136,7 +136,7 @@ test_expect_success 'custom merge backend' '
 	git config --replace-all \
 	merge.custom.name "custom merge driver for testing" &&
 
-	if git merge master
+	if git merge main
 	then
 		echo "Eh? should have conflicted"
 		false
@@ -146,9 +146,9 @@ test_expect_success 'custom merge backend' '
 
 	cmp binary union &&
 	sed -e 1,3d text >check-1 &&
-	o=$(git unpack-file master^:text) &&
+	o=$(git unpack-file main^:text) &&
 	a=$(git unpack-file anchor:text) &&
-	b=$(git unpack-file master:text) &&
+	b=$(git unpack-file main:text) &&
 	sh -c "./custom-merge $o $a $b 0 text" &&
 	sed -e 1,3d $a >check-2 &&
 	cmp check-1 check-2 &&
@@ -176,7 +176,7 @@ test_expect_success 'up-to-date merge without common ancestor' '
 	test_tick &&
 	(
 		cd repo1 &&
-		git fetch ../repo2 master &&
+		git fetch ../repo2 main &&
 		git merge --allow-unrelated-histories FETCH_HEAD
 	)
 '
@@ -201,7 +201,7 @@ test_expect_success 'custom merge does not lock index' '
 	# By packaging the command in test_when_finished, we get both
 	# the correctness check and the clean-up.
 	test_when_finished "kill \$(cat sleep.pid)" &&
-	git merge master
+	git merge main
 '
 
 test_done
t/t6407-merge-binary.sh +3 -3
index 4e6c7cb77e..a76c85ec1e 100755
@@ -20,7 +20,7 @@ test_expect_success setup '
 	git ls-files -s a >E0 &&
 	git ls-files -s m | sed -e "s/ 0	/ 3	/" >E3 &&
 	test_tick &&
-	git commit -m "master adds some" &&
+	git commit -m "main adds some" &&
 
 	git checkout side &&
 	echo rezrov >>m &&
@@ -39,7 +39,7 @@ test_expect_success resolve '
 	rm -f a* m* &&
 	git reset --hard anchor &&
 
-	if git merge -s resolve master
+	if git merge -s resolve main
 	then
 		echo Oops, should not have succeeded
 		false
@@ -54,7 +54,7 @@ test_expect_success recursive '
 	rm -f a* m* &&
 	git reset --hard anchor &&
 
-	if git merge -s recursive master
+	if git merge -s recursive main
 	then
 		echo Oops, should not have succeeded
 		false
t/t6409-merge-subtree.sh +8 -8
index b8e8b6f642..55ae58584a 100755
@@ -14,10 +14,10 @@ test_expect_success setup '
 	echo >>hello world &&
 	git add hello &&
 	git commit -m second &&
-	git checkout master &&
+	git checkout main &&
 	for i in mundo $s; do echo $i; done >hello &&
 	git add hello &&
-	git commit -m master
+	git commit -m main
 
 '
 
@@ -36,7 +36,7 @@ test_expect_success 'setup branch sub' '
 '
 
 test_expect_success 'setup topic branch' '
-	git checkout -b topic master &&
+	git checkout -b topic main &&
 	git merge -s ours --no-commit --allow-unrelated-histories sub &&
 	git read-tree --prefix=dir/ -u sub &&
 	git commit -m "initial merge of sub into topic" &&
@@ -77,8 +77,8 @@ test_expect_success 'setup' '
 
 test_expect_success 'initial merge' '
 	git remote add -f gui ../git-gui &&
-	git merge -s ours --no-commit --allow-unrelated-histories gui/master &&
-	git read-tree --prefix=git-gui/ -u gui/master &&
+	git merge -s ours --no-commit --allow-unrelated-histories gui/main &&
+	git read-tree --prefix=git-gui/ -u gui/main &&
 	git commit -m "Merge git-gui as our subdirectory" &&
 	git checkout -b work &&
 	git ls-files -s >actual &&
@@ -108,10 +108,10 @@ test_expect_success 'merge update' '
 
 test_expect_success 'initial ambiguous subtree' '
 	cd ../git &&
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b topic_2 &&
-	git merge -s ours --no-commit gui/master &&
-	git read-tree --prefix=git-gui2/ -u gui/master &&
+	git merge -s ours --no-commit gui/main &&
+	git read-tree --prefix=git-gui2/ -u gui/main &&
 	git commit -m "Merge git-gui2 as our subdirectory" &&
 	git checkout -b work2 &&
 	git ls-files -s >actual &&
t/t6411-merge-filemode.sh +5 -5
index 87741efad3..7ded226de4 100755
@@ -7,11 +7,11 @@ test_expect_success 'set up mode change in one branch' '
 	: >file1 &&
 	git add file1 &&
 	git commit -m initial &&
-	git checkout -b a1 master &&
+	git checkout -b a1 main &&
 	: >dummy &&
 	git add dummy &&
 	git commit -m a &&
-	git checkout -b b1 master &&
+	git checkout -b b1 main &&
 	test_chmod +x file1 &&
 	git add file1 &&
 	git commit -m b1
@@ -39,12 +39,12 @@ do_one_mode resolve b1 a1
 
 test_expect_success 'set up mode change in both branches' '
 	git reset --hard HEAD &&
-	git checkout -b a2 master &&
+	git checkout -b a2 main &&
 	: >file2 &&
 	H=$(git hash-object file2) &&
 	test_chmod +x file2 &&
 	git commit -m a2 &&
-	git checkout -b b2 master &&
+	git checkout -b b2 main &&
 	: >file2 &&
 	git add file2 &&
 	git commit -m b2 &&
@@ -76,7 +76,7 @@ do_both_modes resolve
 
 test_expect_success 'set up delete/modechange scenario' '
 	git reset --hard &&
-	git checkout -b deletion master &&
+	git checkout -b deletion main &&
 	git rm file1 &&
 	git commit -m deletion
 '
t/t6412-merge-large-rename.sh +3 -3
index 80777386dc..489ebd9bb7 100755
@@ -30,7 +30,7 @@ test_rename() {
 	test_expect_success "rename ($1, $2)" '
 	n='$1' &&
 	expect='$2' &&
-	git checkout -f master &&
+	git checkout -f main &&
 	test_might_fail git branch -D test$n &&
 	git reset --hard initial &&
 	for i in $(count $n); do
@@ -50,8 +50,8 @@ test_rename() {
 	git add . &&
 	git commit -m change+rename=$n &&
 	case "$expect" in
-		ok) git merge master ;;
-		 *) test_must_fail git merge master ;;
+		ok) git merge main ;;
+		 *) test_must_fail git merge main ;;
 	esac
 	'
 }
t/t6413-merge-crlf.sh +1 -1
index e8d65eefb5..feaf9ef1a0 100755
@@ -24,7 +24,7 @@ test_expect_success setup '
 	echo line from b | append_cr >file &&
 	git commit -m "add line from b" file &&
 	git tag b &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'Check "ours" is CRLF' '
t/t6414-merge-rename-nocruft.sh +1 -1
index a25e730460..81fa89331c 100755
@@ -65,7 +65,7 @@ test_expect_success 'setup' '
 	git update-index A &&
 	git commit -m "blue modify A" &&
 
-	git checkout master
+	git checkout main
 '
 
 # This test broke in 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae
t/t6415-merge-dir-to-symlink.sh +11 -11
index 2eddcc7664..3bbabbee49 100755
@@ -19,7 +19,7 @@ test_expect_success 'create a commit where dir a/b changed to symlink' '
 
 test_expect_success 'checkout does not clobber untracked symlink' '
 	git checkout HEAD^0 &&
-	git reset --hard master &&
+	git reset --hard main &&
 	git rm --cached a/b &&
 	git commit -m "untracked symlink remains" &&
 	test_must_fail git checkout start^0
@@ -27,7 +27,7 @@ test_expect_success 'checkout does not clobber untracked symlink' '
 
 test_expect_success 'a/b-2/c/d is kept when clobbering symlink b' '
 	git checkout HEAD^0 &&
-	git reset --hard master &&
+	git reset --hard main &&
 	git rm --cached a/b &&
 	git commit -m "untracked symlink remains" &&
 	git checkout -f start^0 &&
@@ -36,7 +36,7 @@ test_expect_success 'a/b-2/c/d is kept when clobbering symlink b' '
 
 test_expect_success 'checkout should not have deleted a/b-2/c/d' '
 	git checkout HEAD^0 &&
-	git reset --hard master &&
+	git reset --hard main &&
 	 git checkout start^0 &&
 	 test_path_is_file a/b-2/c/d
 '
@@ -53,7 +53,7 @@ test_expect_success 'setup for merge test' '
 test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (resolve)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
-	git merge -s resolve master &&
+	git merge -s resolve main &&
 	test_path_is_file a/b-2/c/d
 '
 
@@ -64,7 +64,7 @@ test_expect_success SYMLINKS 'a/b was resolved as symlink' '
 test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (recursive)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
-	git merge -s recursive master &&
+	git merge -s recursive main &&
 	test_path_is_file a/b-2/c/d
 '
 
@@ -74,7 +74,7 @@ test_expect_success SYMLINKS 'a/b was resolved as symlink' '
 
 test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (resolve)' '
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	git merge -s resolve baseline^0 &&
 	test_path_is_file a/b-2/c/d
 '
@@ -85,7 +85,7 @@ test_expect_success SYMLINKS 'a/b was resolved as symlink' '
 
 test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (recursive)' '
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	git merge -s recursive baseline^0 &&
 	test_path_is_file a/b-2/c/d
 '
@@ -98,7 +98,7 @@ test_expect_failure 'do not lose untracked in merge (resolve)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
 	>a/b/c/e &&
-	test_must_fail git merge -s resolve master &&
+	test_must_fail git merge -s resolve main &&
 	test_path_is_file a/b/c/e &&
 	test_path_is_file a/b-2/c/d
 '
@@ -107,7 +107,7 @@ test_expect_success 'do not lose untracked in merge (recursive)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
 	>a/b/c/e &&
-	test_must_fail git merge -s recursive master &&
+	test_must_fail git merge -s recursive main &&
 	test_path_is_file a/b/c/e &&
 	test_path_is_file a/b-2/c/d
 '
@@ -116,14 +116,14 @@ test_expect_success 'do not lose modifications in merge (resolve)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
 	echo more content >>a/b/c/d &&
-	test_must_fail git merge -s resolve master
+	test_must_fail git merge -s resolve main
 '
 
 test_expect_success 'do not lose modifications in merge (recursive)' '
 	git reset --hard &&
 	git checkout baseline^0 &&
 	echo more content >>a/b/c/d &&
-	test_must_fail git merge -s recursive master
+	test_must_fail git merge -s recursive main
 '
 
 test_expect_success 'setup a merge where dir a/b-2 changed to symlink' '
t/t6416-recursive-corner-cases.sh +14 -14
index dbccc3158a..b43ecb38b7 100755
@@ -385,7 +385,7 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete' '
 		test_line_count = 2 out &&
 
 		git rev-parse >expect       \
-			master:file    B:file &&
+			main:file    B:file &&
 		git rev-parse   >actual      \
 			:1:file      :2:file &&
 		test_cmp expect actual
@@ -407,7 +407,7 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete, rev
 		test_line_count = 2 out &&
 
 		git rev-parse >expect       \
-			master:file    B:file &&
+			main:file    B:file &&
 		git rev-parse   >actual      \
 			:1:file      :3:file &&
 		test_cmp expect actual
@@ -1553,12 +1553,12 @@ test_expect_failure 'check conflicting modes for regular file' '
 # Setup:
 #          L1---L2
 #         /  \ /  \
-#     master    X    ?
+#     main    X    ?
 #         \  / \  /
 #          R1---R2
 #
 # Where:
-#   master has two files, named 'b' and 'a'
+#   main has two files, named 'b' and 'a'
 #   branches L1 and R1 both modify each of the two files in conflicting ways
 #
 #   L2 is a merge of R1 into L1; more on it later.
@@ -1663,7 +1663,7 @@ test_expect_success 'check nested conflicts' '
 		cd nested_conflicts &&
 
 		git clean -f &&
-		MASTER=$(git rev-parse --short master) &&
+		MAIN=$(git rev-parse --short main) &&
 		git checkout L2^0 &&
 
 		# Merge must fail; there is a conflict
@@ -1679,24 +1679,24 @@ test_expect_success 'check nested conflicts' '
 		test_line_count = 1 out &&
 
 		# Create a and b from virtual merge base X
-		git cat-file -p master:a >base &&
+		git cat-file -p main:a >base &&
 		git cat-file -p L1:a >ours &&
 		git cat-file -p R1:a >theirs &&
 		test_must_fail git merge-file --diff3 \
 			-L "Temporary merge branch 1" \
-			-L "$MASTER"  \
+			-L "$MAIN"  \
 			-L "Temporary merge branch 2" \
 			ours  \
 			base  \
 			theirs &&
 		sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_a &&
 
-		git cat-file -p master:b >base &&
+		git cat-file -p main:b >base &&
 		git cat-file -p L1:b >ours &&
 		git cat-file -p R1:b >theirs &&
 		test_must_fail git merge-file --diff3 \
 			-L "Temporary merge branch 1" \
-			-L "$MASTER"  \
+			-L "$MAIN"  \
 			-L "Temporary merge branch 2" \
 			ours  \
 			base  \
@@ -1748,12 +1748,12 @@ test_expect_success 'check nested conflicts' '
 # Setup:
 #          L1---L2---L3
 #         /  \ /  \ /  \
-#     master    X1   X2   ?
+#     main    X1   X2   ?
 #         \  / \  / \  /
 #          R1---R2---R3
 #
 # Where:
-#   master has one file named 'content'
+#   main has one file named 'content'
 #   branches L1 and R1 both modify each of the two files in conflicting ways
 #
 #   L<n> (n>1) is a merge of R<n-1> into L<n-1>
@@ -1834,7 +1834,7 @@ test_expect_success 'check virtual merge base with nested conflicts' '
 	(
 		cd virtual_merge_base_has_nested_conflicts &&
 
-		MASTER=$(git rev-parse --short master) &&
+		MAIN=$(git rev-parse --short main) &&
 		git checkout L3^0 &&
 
 		# Merge must fail; there is a conflict
@@ -1857,13 +1857,13 @@ test_expect_success 'check virtual merge base with nested conflicts' '
 		# Imitate X1 merge base, except without long enough conflict
 		# markers because a subsequent sed will modify them.  Put
 		# result into vmb.
-		git cat-file -p master:content >base &&
+		git cat-file -p main:content >base &&
 		git cat-file -p L:content >left &&
 		git cat-file -p R:content >right &&
 		cp left merged-once &&
 		test_must_fail git merge-file --diff3 \
 			-L "Temporary merge branch 1" \
-			-L "$MASTER"  \
+			-L "$MAIN"  \
 			-L "Temporary merge branch 2" \
 			merged-once \
 			base        \
t/t6417-merge-ours-theirs.sh +14 -14
index 0aebc6c028..4bb77b9779 100755
@@ -20,11 +20,11 @@ test_expect_success setup '
 	sed -e "s/9/nueve/" >file <elif &&
 	git commit -a -m theirs &&
 
-	git checkout master^0
+	git checkout main^0
 '
 
 test_expect_success 'plain recursive - should conflict' '
-	git reset --hard master &&
+	git reset --hard main &&
 	test_must_fail git merge -s recursive side &&
 	grep nine file &&
 	grep nueve file &&
@@ -34,7 +34,7 @@ test_expect_success 'plain recursive - should conflict' '
 '
 
 test_expect_success 'recursive favouring theirs' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git merge -s recursive -Xtheirs side &&
 	! grep nine file &&
 	grep nueve file &&
@@ -44,7 +44,7 @@ test_expect_success 'recursive favouring theirs' '
 '
 
 test_expect_success 'recursive favouring ours' '
-	git reset --hard master &&
+	git reset --hard main &&
 	git merge -s recursive -X ours side &&
 	grep nine file &&
 	! grep nueve file &&
@@ -56,26 +56,26 @@ test_expect_success 'recursive favouring ours' '
 test_expect_success 'binary file with -Xours/-Xtheirs' '
 	echo file binary >.gitattributes &&
 
-	git reset --hard master &&
+	git reset --hard main &&
 	git merge -s recursive -X theirs side &&
 	git diff --exit-code side HEAD -- file &&
 
-	git reset --hard master &&
+	git reset --hard main &&
 	git merge -s recursive -X ours side &&
-	git diff --exit-code master HEAD -- file
+	git diff --exit-code main HEAD -- file
 '
 
 test_expect_success 'pull passes -X to underlying merge' '
-	git reset --hard master && git pull -s recursive -Xours . side &&
-	git reset --hard master && git pull -s recursive -X ours . side &&
-	git reset --hard master && git pull -s recursive -Xtheirs . side &&
-	git reset --hard master && git pull -s recursive -X theirs . side &&
-	git reset --hard master && test_must_fail git pull -s recursive -X bork . side
+	git reset --hard main && git pull -s recursive -Xours . side &&
+	git reset --hard main && git pull -s recursive -X ours . side &&
+	git reset --hard main && git pull -s recursive -Xtheirs . side &&
+	git reset --hard main && git pull -s recursive -X theirs . side &&
+	git reset --hard main && test_must_fail git pull -s recursive -X bork . side
 '
 
 test_expect_success SYMLINKS 'symlink with -Xours/-Xtheirs' '
-	git reset --hard master &&
-	git checkout -b two master &&
+	git reset --hard main &&
+	git checkout -b two main &&
 	ln -s target-zero link &&
 	git add link &&
 	git commit -m "add link pointing to zero" &&
t/t6418-merge-text-auto.sh +6 -6
index 30983d18b1..b8df80d2df 100755
@@ -2,13 +2,13 @@
 
 test_description='CRLF merge conflict across text=auto change
 
-* [master] remove .gitattributes
+* [main] remove .gitattributes
  ! [side] add line from b
 --
  + [side] add line from b
-*  [master] remove .gitattributes
-*  [master^] add line from a
-*  [master~2] normalize file
+*  [main] remove .gitattributes
+*  [main^] add line from a
+*  [main~2] normalize file
 *+ [side^] Initial
 '
 
@@ -64,7 +64,7 @@ test_expect_success setup '
 	git commit -m "add line from b" &&
 	git tag b &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'set up fuzz_conflict() helper' '
@@ -195,7 +195,7 @@ test_expect_success 'Test delete/normalize conflict' '
 	git reset --hard initial &&
 	git rm file &&
 	git commit -m "remove file" &&
-	git checkout master &&
+	git checkout main &&
 	git reset --hard a^ &&
 	git merge side &&
 	test_path_is_missing file
t/t6419-merge-ignorecase.sh +5 -5
index 531850d834..d32bbb3359 100755
@@ -20,18 +20,18 @@ test_expect_success 'merge with case-changing rename' '
 	>foo &&
 	git add foo &&
 	git commit -m "intervening commit" &&
-	git checkout master &&
+	git checkout main &&
 	git rm TestCase &&
 	>testcase &&
 	git add testcase &&
 	git commit -m "rename to testcase" &&
 	git checkout with-camel &&
-	git merge master -m "merge" &&
+	git merge main -m "merge" &&
 	test_path_is_file testcase
 '
 
 test_expect_success 'merge with case-changing rename on both sides' '
-	git checkout master &&
+	git checkout main &&
 	git reset --hard baseline &&
 	git branch -D with-camel &&
 	git checkout -b with-camel &&
@@ -40,13 +40,13 @@ test_expect_success 'merge with case-changing rename on both sides' '
 	>foo &&
 	git add foo &&
 	git commit -m "intervening commit" &&
-	git checkout master &&
+	git checkout main &&
 	git rm TestCase &&
 	>testcase &&
 	git add testcase &&
 	git commit -m "rename to testcase" &&
 	git checkout with-camel &&
-	git merge master -m "merge" &&
+	git merge main -m "merge" &&
 	test_path_is_file testcase
 '
 
t/t6422-merge-rename-corner-cases.sh +6 -6
index e40a1b686f..21c64b51be 100755
@@ -1130,7 +1130,7 @@ test_conflicts_with_adds_and_renames() {
 	# Setup:
 	#          L
 	#         / \
-	#     master   ?
+	#     main   ?
 	#         \ /
 	#          R
 	#
@@ -1260,7 +1260,7 @@ test_conflicts_with_adds_and_renames() {
 				:2:three           \
 				:3:three           &&
 			git rev-parse >expected        \
-				master:irrelevant_file \
+				main:irrelevant_file \
 				file_v2                \
 				file_v4                &&
 			test_cmp expected actual &&
@@ -1290,12 +1290,12 @@ test_conflicts_with_adds_and_renames add    add
 # Setup:
 #          L
 #         / \
-#     master   ?
+#     main   ?
 #         \ /
 #          R
 #
 # Where:
-#   master has two files, named 'one' and 'two'.
+#   main has two files, named 'one' and 'two'.
 #   branches L and R both modify 'one', in conflicting ways.
 #   branches L and R both modify 'two', in conflicting ways.
 #   branch L also renames 'one' to 'three'.
@@ -1376,7 +1376,7 @@ test_expect_success 'check nested conflicts from rename/rename(2to1)' '
 		test_line_count = 1 out &&
 
 		# Compare :2:three to expected values
-		git cat-file -p master:one >base &&
+		git cat-file -p main:one >base &&
 		git cat-file -p L:three >ours &&
 		git cat-file -p R:one >theirs &&
 		test_must_fail git merge-file    \
@@ -1387,7 +1387,7 @@ test_expect_success 'check nested conflicts from rename/rename(2to1)' '
 		test_cmp expect L-three &&
 
 		# Compare :2:three to expected values
-		git cat-file -p master:two >base &&
+		git cat-file -p main:two >base &&
 		git cat-file -p L:two >ours &&
 		git cat-file -p R:three >theirs &&
 		test_must_fail git merge-file    \
t/t6425-merge-rename-delete.sh +1 -1
index f79d021590..2d39bf630e 100755
@@ -12,7 +12,7 @@ test_expect_success 'rename/delete' '
 	git mv A B &&
 	git commit -m "rename" &&
 
-	git checkout master &&
+	git checkout main &&
 	git rm A &&
 	git commit -m "delete" &&
 
t/t6427-diff3-conflict-markers.sh +7 -7
index f7620e677c..b28966d0f4 100755
@@ -43,7 +43,7 @@ test_expect_success 'check no merge base' '
 # Setup:
 #          L1
 #         /  \
-#     master    ?
+#     main    ?
 #         \  /
 #          R1
 #
@@ -90,18 +90,18 @@ test_expect_success 'check unique merge base' '
 		cd unique_merge_base &&
 
 		git checkout L^0 &&
-		MASTER=$(git rev-parse --short master) &&
+		MAIN=$(git rev-parse --short main) &&
 
 		test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R^0 &&
 
-		grep "|||||| $MASTER:content" renamed
+		grep "|||||| $MAIN:content" renamed
 	)
 '
 
 # Setup:
 #          L1---L2--L3
 #         /  \ /      \
-#     master    X1       ?
+#     main    X1       ?
 #         \  / \      /
 #          R1---R2--R3
 #
@@ -191,10 +191,10 @@ test_expect_success 'rebase --merge describes parent of commit being picked' '
 	(
 		cd rebase &&
 		test_commit base file &&
-		test_commit master file &&
+		test_commit main file &&
 		git checkout -b side HEAD^ &&
 		test_commit side file &&
-		test_must_fail git -c merge.conflictstyle=diff3 rebase --merge master &&
+		test_must_fail git -c merge.conflictstyle=diff3 rebase --merge main &&
 		grep "||||||| parent of" file
 	)
 '
@@ -203,7 +203,7 @@ test_expect_success 'rebase --apply describes fake ancestor base' '
 	(
 		cd rebase &&
 		git rebase --abort &&
-		test_must_fail git -c merge.conflictstyle=diff3 rebase --apply master &&
+		test_must_fail git -c merge.conflictstyle=diff3 rebase --apply main &&
 		grep "||||||| constructed merge base" file
 	)
 '
t/t6430-merge-recursive.sh +9 -9
index 9c08e63af2..4bc8cc764b 100755
@@ -35,7 +35,7 @@ test_expect_success 'setup 1' '
 	git add a d/e &&
 
 	test_tick &&
-	git commit -m "master modifies a and d/e" &&
+	git commit -m "main modifies a and d/e" &&
 	c1=$(git rev-parse --verify HEAD) &&
 	( git ls-tree -r HEAD && git ls-files -s ) >actual &&
 	(
@@ -466,7 +466,7 @@ test_expect_success SYMLINKS 'dir in working tree with symlink ancestor does not
 		git checkout -b branch1 &&
 		git commit --allow-empty -m "empty commit" &&
 
-		git checkout master &&
+		git checkout main &&
 		git rm foo &&
 		mkdir foo &&
 		>foo/bar &&
@@ -475,7 +475,7 @@ test_expect_success SYMLINKS 'dir in working tree with symlink ancestor does not
 
 		git checkout branch1 &&
 
-		git cherry-pick master &&
+		git cherry-pick main &&
 		test_path_is_dir foo &&
 		test_path_is_file foo/bar
 	)
@@ -490,8 +490,8 @@ test_expect_success 'reset and 3-way merge' '
 
 test_expect_success 'reset and bind merge' '
 
-	git reset --hard master &&
-	git read-tree --prefix=M/ master &&
+	git reset --hard main &&
+	git read-tree --prefix=M/ main &&
 	git ls-files -s >actual &&
 	(
 		echo "100644 $o1 0	M/a" &&
@@ -505,7 +505,7 @@ test_expect_success 'reset and bind merge' '
 	) >expected &&
 	test_cmp expected actual &&
 
-	git read-tree --prefix=a1/ master &&
+	git read-tree --prefix=a1/ main &&
 	git ls-files -s >actual &&
 	(
 		echo "100644 $o1 0	M/a" &&
@@ -523,7 +523,7 @@ test_expect_success 'reset and bind merge' '
 	) >expected &&
 	test_cmp expected actual &&
 
-	git read-tree --prefix=z/ master &&
+	git read-tree --prefix=z/ main &&
 	git ls-files -s >actual &&
 	(
 		echo "100644 $o1 0	M/a" &&
@@ -599,11 +599,11 @@ test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' '
 
 test_expect_success 'merge removes empty directories' '
 
-	git reset --hard master &&
+	git reset --hard main &&
 	git checkout -b rm &&
 	git rm d/e &&
 	git commit -mremoved-d/e &&
-	git checkout master &&
+	git checkout main &&
 	git merge -s recursive rm &&
 	test_path_is_missing d
 '
t/t6432-merge-recursive-space-options.sh +3 -3
index b56180ee4a..4eda1dd444 100755
@@ -2,11 +2,11 @@
 
 test_description='merge-recursive space options
 
-* [master] Clarify
+* [main] Clarify
  ! [remote] Remove cruft
 --
  + [remote] Remove cruft
-*  [master] Clarify
+*  [main] Clarify
 *+ [remote^] Initial revision
 *   ok 1: setup
 '
@@ -87,7 +87,7 @@ test_expect_success 'setup' '
 	mv text.txt+ text.txt &&
 	git commit -a -m "Remove cruft" &&
 
-	git checkout master &&
+	git checkout main &&
 	sed -e "
 			s/\(not in his right mind\),\(.*\)/\1;\2Q/
 			s/Quite correct\(.*\)/It is too correct\1Q/
t/t6433-merge-toplevel.sh +4 -4
index e29c284b9b..fdbd095cde 100755
@@ -5,7 +5,7 @@ test_description='"git merge" top-level frontend'
 . ./test-lib.sh
 
 t3033_reset () {
-	git checkout -B master two &&
+	git checkout -B main two &&
 	git branch -f left three &&
 	git branch -f right four
 }
@@ -21,7 +21,7 @@ test_expect_success setup '
 	test_commit four &&
 	git checkout --orphan newroot &&
 	test_commit five &&
-	git checkout master
+	git checkout main
 '
 
 # Local branches
@@ -61,7 +61,7 @@ test_expect_success 'merge octopus, non-fast-forward (ff)' '
 test_expect_success 'merge octopus, fast-forward (does not ff)' '
 	t3033_reset &&
 	git merge left right &&
-	# two (master) is not an ancestor of three (left) and four (right)
+	# two (main) is not an ancestor of three (left) and four (right)
 	test_must_fail git rev-parse --verify HEAD^4 &&
 	git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual &&
 	git rev-parse two three four | sort >expect &&
@@ -118,7 +118,7 @@ test_expect_success 'merge FETCH_HEAD octopus fast-forward (does not ff)' '
 	t3033_reset &&
 	git fetch . left right &&
 	git merge FETCH_HEAD &&
-	# two (master) is not an ancestor of three (left) and four (right)
+	# two (main) is not an ancestor of three (left) and four (right)
 	test_must_fail git rev-parse --verify HEAD^4 &&
 	git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual &&
 	git rev-parse two three four | sort >expect &&
t/t6434-merge-recursive-rename-options.sh +3 -3
index 3d9fae68c4..1203984101 100755
@@ -5,11 +5,11 @@ test_description='merge-recursive rename options
 Test rename detection by examining rename/delete conflicts.
 
 * (HEAD -> rename) rename
-| * (master) delete
+| * (main) delete
 |/
 * base
 
-git diff --name-status base master
+git diff --name-status base main
 D	0-old
 D	1-old
 D	2-old
@@ -118,7 +118,7 @@ test_expect_success 'setup repo' '
 	get_expected_stages 2 &&
 	get_expected_stages 3 &&
 	check_50="false" &&
-	tail="HEAD^ -- HEAD master"
+	tail="HEAD^ -- HEAD main"
 '
 
 test_expect_success 'setup thresholds' '
t/t6436-merge-overwrite.sh +1 -1
index dd9376842f..8efe96dc8c 100755
@@ -193,7 +193,7 @@ test_expect_success 'set up unborn branch and content' '
 '
 
 test_expect_success 'will not clobber WT/index when merging into unborn' '
-	git merge master &&
+	git merge main &&
 	grep foo tracked-file &&
 	git show :tracked-file >expect &&
 	grep foo expect &&
t/t6437-submodule-merge.sh +7 -7
index 3ead2b726f..d71e9410b9 100755
@@ -27,7 +27,7 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m root &&
 
-	git checkout -b a master &&
+	git checkout -b a main &&
 	(cd sub &&
 	 echo A > file &&
 	 git add file &&
@@ -37,7 +37,7 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m a &&
 
-	git checkout -b b master &&
+	git checkout -b b main &&
 	(cd sub &&
 	 echo B > file &&
 	 git add file &&
@@ -254,22 +254,22 @@ test_expect_success 'setup for recursive merge with submodule' '
 	 (cd sub &&
 	  git init &&
 	  test_commit a &&
-	  git checkout -b sub-b master &&
+	  git checkout -b sub-b main &&
 	  test_commit b &&
-	  git checkout -b sub-c master &&
+	  git checkout -b sub-c main &&
 	  test_commit c &&
 	  git checkout -b sub-bc sub-b &&
 	  git merge sub-c &&
 	  git checkout -b sub-cb sub-c &&
 	  git merge sub-b &&
-	  git checkout master) &&
+	  git checkout main) &&
 	 git add sub &&
 	 git commit -m a &&
-	 git checkout -b top-b master &&
+	 git checkout -b top-b main &&
 	 (cd sub && git checkout sub-b) &&
 	 git add sub &&
 	 git commit -m b &&
-	 git checkout -b top-c master &&
+	 git checkout -b top-c main &&
 	 (cd sub && git checkout sub-c) &&
 	 git add sub &&
 	 git commit -m c &&
t/t6439-merge-co-error-msgs.sh +3 -3
index 5c8894d94f..cd87fe6dd4 100755
@@ -18,7 +18,7 @@ test_expect_success 'setup' '
 	git add two three four five &&
 	git commit -m Second &&
 
-	git checkout master &&
+	git checkout main &&
 	echo other >two &&
 	echo other >three &&
 	echo other >four &&
@@ -83,7 +83,7 @@ test_expect_success 'cannot switch branches because of local changes' '
 	echo two >rep/two &&
 	git add rep/one rep/two &&
 	git commit -m Fourth &&
-	git checkout master &&
+	git checkout main &&
 	echo uno >rep/one &&
 	echo dos >rep/two &&
 	test_must_fail git checkout branch 2>out &&
@@ -128,7 +128,7 @@ test_expect_success 'not_uptodate_dir porcelain checkout error' '
 	>rep2 &&
 	git add rep rep2 &&
 	git commit -m "added test as a file" &&
-	git checkout master &&
+	git checkout main &&
 	>rep/untracked-file &&
 	>rep2/untracked-file &&
 	test_must_fail git checkout branch 2>out &&
t/t6501-freshen-objects.sh +1 -1
index 8a3bb4105b..2f2b89f229 100755
@@ -67,7 +67,7 @@ for repack in '' true; do
 		git checkout -b experiment &&
 		commit abandon &&
 		maybe_repack &&
-		git checkout master &&
+		git checkout main &&
 		git branch -D experiment
 	'
 
t/test-lib.sh +1 -1
index 307b75eafe..44b4bba0cb 100644
@@ -263,7 +263,7 @@ case "$TEST_NUMBER" in
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-5]*|6[0-3]*)
+[0-6]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#20 lore raw

PATCH 17/28 t6[0-3]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Carefully excluding t6300, which sees independent development elsewhere at the time of writing, we use main as the default branch name in t6[0-3]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t6[0-3]*.sh &&
	   git checkout HEAD -- t6300\*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t6000-rev-list-misc.sh                   |  2 +-
 t/t6001-rev-list-graft.sh                  |  2 +-
 t/t6004-rev-list-path-optim.sh             | 14 +++---
 t/t6006-rev-list-format.sh                 | 14 +++---
 t/t6007-rev-list-cherry-pick-file.sh       |  4 +-
 t/t6008-rev-list-submodule.sh              |  2 +-
 t/t6009-rev-list-parent.sh                 |  6 +--
 t/t6012-rev-list-simplify.sh               |  8 ++--
 t/t6013-rev-list-reverse-parents.sh        | 10 ++--
 t/t6016-rev-list-graph-simplify-history.sh |  2 +-
 t/t6017-rev-list-stdin.sh                  |  8 ++--
 t/t6018-rev-list-glob.sh                   | 50 ++++++++++----------
 t/t6019-rev-list-ancestry-path.sh          |  6 +--
 t/t6030-bisect-porcelain.sh                | 10 ++--
 t/t6040-tracking-info.sh                   | 54 +++++++++++-----------
 t/t6050-replace.sh                         | 10 ++--
 t/t6101-rev-parse-parents.sh               |  2 +-
 t/t6110-rev-list-sparse.sh                 |  2 +-
 t/t6111-rev-list-treesame.sh               |  6 +--
 t/t6112-rev-list-filters-objects.sh        | 14 +++---
 t/t6120-describe.sh                        | 20 ++++----
 t/t6200-fmt-merge-msg.sh                   | 50 ++++++++++----------
 t/t6302-for-each-ref-filter.sh             | 46 +++++++++---------
 t/test-lib.sh                              |  4 +-
 24 files changed, 173 insertions(+), 173 deletions(-)
t/t6000-rev-list-misc.sh +1 -1
index fc4d55dcb2..dc40a39fce 100755
@@ -85,7 +85,7 @@ test_expect_success 'propagate uninteresting flag down correctly' '
 '
 
 test_expect_success 'symleft flag bit is propagated down from tag' '
-	git log --format="%m %s" --left-right v1.0...master >actual &&
+	git log --format="%m %s" --left-right v1.0...main >actual &&
 	cat >expect <<-\EOF &&
 	< another
 	< that
t/t6001-rev-list-graft.sh +1 -1
index 7504ba4751..4490981352 100755
@@ -20,7 +20,7 @@ test_expect_success setup '
 	git commit -a -m "Third in one history." &&
 	A2=$(git rev-parse --verify HEAD) &&
 
-	rm -f .git/refs/heads/master .git/index &&
+	rm -f .git/refs/heads/main .git/index &&
 
 	echo >fileA fileA again &&
 	echo >subdir/fileB fileB again &&
t/t6004-rev-list-path-optim.sh +7 -7
index 3e8c42ee0b..81d1b57ced 100755
@@ -4,7 +4,7 @@ test_description='git rev-list trivial path optimization test
 
    d/z1
    b0                             b1
-   o------------------------*----o master
+   o------------------------*----o main
   /                        /
  o---------o----o----o----o side
  a0        c0   c1   a1   c2
@@ -55,18 +55,18 @@ test_expect_success 'further setup' '
 	git add c &&
 	test_tick &&
 	git commit -m "Side makes yet another irrelevant commit" &&
-	git checkout master &&
+	git checkout main &&
 	echo Another >b &&
 	echo Munged >d/z &&
 	git add b d/z &&
 	test_tick &&
-	git commit -m "Master touches b" &&
-	git tag master_b0 &&
+	git commit -m "Main touches b" &&
+	git tag main_b0 &&
 	git merge side &&
 	echo Touched >b &&
 	git add b &&
 	test_tick &&
-	git commit -m "Master touches b again"
+	git commit -m "Main touches b again"
 '
 
 test_expect_success 'path optimization 2' '
@@ -76,13 +76,13 @@ test_expect_success 'path optimization 2' '
 '
 
 test_expect_success 'pathspec with leading path' '
-	git rev-parse master^ master_b0 side_c0 initial >expected &&
+	git rev-parse main^ main_b0 side_c0 initial >expected &&
 	git rev-list HEAD -- d >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'pathspec with glob (1)' '
-	git rev-parse master^ master_b0 side_c0 initial >expected &&
+	git rev-parse main^ main_b0 side_c0 initial >expected &&
 	git rev-list HEAD -- "d/*" >actual &&
 	test_cmp expected actual
 '
t/t6006-rev-list-format.sh +7 -7
index 99a1eaf332..8cc54a5a50 100755
@@ -53,7 +53,7 @@ test_expect_success 'setup' '
 test_format () {
 	cat >expect.$1
 	test_expect_${3:-success} "format $1" "
-		git rev-list --pretty=format:'$2' master >output.$1 &&
+		git rev-list --pretty=format:'$2' main >output.$1 &&
 		test_cmp expect.$1 output.$1
 	"
 }
@@ -184,13 +184,13 @@ test_expect_success 'basic colors' '
 	<RED>foo<GREEN>bar<BLUE>baz<RESET>xyzzy
 	EOF
 	format="%Credfoo%Cgreenbar%Cbluebaz%Cresetxyzzy" &&
-	git rev-list --color --format="$format" -1 master >actual.raw &&
+	git rev-list --color --format="$format" -1 main >actual.raw &&
 	test_decode_color <actual.raw >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success '%S is not a placeholder for rev-list yet' '
-	git rev-list --format="%S" -1 master | grep "%S"
+	git rev-list --format="%S" -1 main | grep "%S"
 '
 
 test_expect_success 'advanced colors' '
@@ -199,7 +199,7 @@ test_expect_success 'advanced colors' '
 	<BOLD;RED;BYELLOW>foo<RESET>
 	EOF
 	format="%C(red yellow bold)foo%C(reset)" &&
-	git rev-list --color --format="$format" -1 master >actual.raw &&
+	git rev-list --color --format="$format" -1 main >actual.raw &&
 	test_decode_color <actual.raw >actual &&
 	test_cmp expect actual
 '
@@ -406,7 +406,7 @@ test_expect_success '%x00 shows NUL' '
 
 test_expect_success '%ad respects --date=' '
 	echo 2005-04-07 >expect.ad-short &&
-	git log -1 --date=short --pretty=tformat:%ad >output.ad-short master &&
+	git log -1 --date=short --pretty=tformat:%ad >output.ad-short main &&
 	test_cmp expect.ad-short output.ad-short
 '
 
@@ -494,8 +494,8 @@ test_expect_success '"%h %gD: %gs" is same as git-reflog (with --abbrev)' '
 '
 
 test_expect_success '%gd shortens ref name' '
-	echo "master@{0}" >expect.gd-short &&
-	git log -g -1 --format=%gd refs/heads/master >actual.gd-short &&
+	echo "main@{0}" >expect.gd-short &&
+	git log -g -1 --format=%gd refs/heads/main >actual.gd-short &&
 	test_cmp expect.gd-short actual.gd-short
 '
 
t/t6007-rev-list-cherry-pick-file.sh +2 -2
index f0268372d2..e689959593 100755
@@ -31,7 +31,7 @@ test_expect_success setup '
 	test_tick &&
 	git commit -m "E" &&
 	git tag E &&
-	git checkout master &&
+	git checkout main &&
 	git checkout branch foo &&
 	test_tick &&
 	git commit -m "B" &&
@@ -233,7 +233,7 @@ test_expect_success '--cherry-pick with independent, but identical branches' '
 	test_tick &&
 	git commit -m "independent, too" foo &&
 	test -z "$(git rev-list --left-right --cherry-pick \
-		HEAD...master -- foo)"
+		HEAD...main -- foo)"
 '
 
 cat >expect <<EOF
t/t6008-rev-list-submodule.sh +1 -1
index c4af9ca0a7..39762aa6ff 100755
@@ -36,7 +36,7 @@ test_expect_success 'setup' '
 '
 
 test_expect_success "Ilari's test" '
-	git rev-list --objects super master ^super^
+	git rev-list --objects super main ^super^
 '
 
 test_done
t/t6009-rev-list-parent.sh +3 -3
index 916d9692bc..7dedceb472 100755
@@ -45,7 +45,7 @@ test_expect_success 'setup roots, merges and octopuses' '
 	test_commit seven &&
 	git checkout -b yetanotherbranch four &&
 	test_commit eight &&
-	git checkout master &&
+	git checkout main &&
 	test_tick &&
 	git merge --allow-unrelated-histories -m normalmerge newroot &&
 	git tag normalmerge &&
@@ -56,7 +56,7 @@ test_expect_success 'setup roots, merges and octopuses' '
 	test_tick &&
 	git merge -m tetrapus sidebranch anotherbranch yetanotherbranch &&
 	git tag tetrapus &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'rev-list roots' '
@@ -123,7 +123,7 @@ test_expect_success 'dodecapus' '
 		roots="$roots root$i" ||
 		return
 	done &&
-	git checkout master &&
+	git checkout main &&
 	test_tick &&
 	git merge -m dodecapus $roots &&
 	git tag dodecapus &&
t/t6012-rev-list-simplify.sh +4 -4
index fd202fcb94..1b5f54a3f5 100755
@@ -43,7 +43,7 @@ test_expect_success setup '
 	git add side &&
 	test_tick && git commit -m "Side root" &&
 	note J &&
-	git checkout master &&
+	git checkout main &&
 
 	echo "Hello" >file &&
 	echo "second" >lost &&
@@ -65,7 +65,7 @@ test_expect_success setup '
 	note D &&
 
 	test_tick &&
-	test_must_fail git merge -m "merge" master &&
+	test_must_fail git merge -m "merge" main &&
 	>lost && git commit -a -m "merge" &&
 	note E &&
 
@@ -74,7 +74,7 @@ test_expect_success setup '
 	test_tick && git commit -m "Irrelevant change" &&
 	note F &&
 
-	git checkout master &&
+	git checkout main &&
 	echo "Yet another" >elif &&
 	git add elif &&
 	test_tick && git commit -m "Another irrelevant change" &&
@@ -87,7 +87,7 @@ test_expect_success setup '
 	test_tick && git commit -a -m "Final change" &&
 	note I &&
 
-	git checkout master &&
+	git checkout main &&
 	test_tick && git merge --allow-unrelated-histories -m "Coolest" unrelated &&
 	note K &&
 
t/t6013-rev-list-reverse-parents.sh +5 -5
index 89458d370f..e6caf80d7e 100755
@@ -18,24 +18,24 @@ test_expect_success 'set up --reverse example' '
 	commit two &&
 	git checkout -b side HEAD^ &&
 	commit three &&
-	git checkout master &&
+	git checkout main &&
 	git merge -s ours side &&
 	commit five
 	'
 
 test_expect_success '--reverse --parents --full-history combines correctly' '
-	git rev-list --parents --full-history master -- foo |
+	git rev-list --parents --full-history main -- foo |
 		perl -e "print reverse <>" > expected &&
-	git rev-list --reverse --parents --full-history master -- foo \
+	git rev-list --reverse --parents --full-history main -- foo \
 		> actual &&
 	test_cmp expected actual
 	'
 
 test_expect_success '--boundary does too' '
-	git rev-list --boundary --parents --full-history master ^root -- foo |
+	git rev-list --boundary --parents --full-history main ^root -- foo |
 		perl -e "print reverse <>" > expected &&
 	git rev-list --boundary --reverse --parents --full-history \
-		master ^root -- foo > actual &&
+		main ^root -- foo > actual &&
 	test_cmp expected actual
 	'
 
t/t6016-rev-list-graph-simplify-history.sh +1 -1
index f5e6e92f5b..c341e6ecb4 100755
@@ -14,7 +14,7 @@ test_expect_success 'set up rev-list --graph test' '
 	test_commit A1 foo.txt &&
 	test_commit A2 bar.txt &&
 	test_commit A3 bar.txt &&
-	git branch -m master A &&
+	git branch -m main A &&
 
 	# 2 commits on branch B, started from A1
 	git checkout -b B A1 &&
t/t6017-rev-list-stdin.sh +4 -4
index 667b37564e..6b72f100cb 100755
@@ -40,7 +40,7 @@ test_expect_success setup '
 		done &&
 		for i in $them
 		do
-			git checkout -b side-$i master~$i &&
+			git checkout -b side-$i main~$i &&
 			echo updated $i >file-$i &&
 			git add file-$i &&
 			test_tick &&
@@ -49,7 +49,7 @@ test_expect_success setup '
 	)
 '
 
-check master
+check main
 check side-1 ^side-4
 check side-1 ^side-7 --
 check side-1 ^side-7 -- file-1
@@ -66,11 +66,11 @@ test_expect_success 'not only --stdin' '
 	file-2
 	EOF
 	cat >input <<-EOF &&
-	^master^
+	^main^
 	--
 	file-2
 	EOF
-	git log --pretty=tformat:%s --name-only --stdin master -- file-1 \
+	git log --pretty=tformat:%s --name-only --stdin main -- file-1 \
 		<input >actual &&
 	test_cmp expect actual
 '
t/t6018-rev-list-glob.sh +25 -25

137 lines not on this page · raw message

t/t6019-rev-list-ancestry-path.sh +3 -3
index 353f84313f..c664d66773 100755
@@ -128,15 +128,15 @@ test_expect_success 'setup criss-cross' '
 	(cd criss-cross &&
 	 git init &&
 	 test_commit A &&
-	 git checkout -b xb master &&
+	 git checkout -b xb main &&
 	 test_commit B &&
-	 git checkout -b xc master &&
+	 git checkout -b xc main &&
 	 test_commit C &&
 	 git checkout -b xbc xb -- &&
 	 git merge xc &&
 	 git checkout -b xcb xc -- &&
 	 git merge xb &&
-	 git checkout master)
+	 git checkout main)
 '
 
 # no commits in bc descend from cb
t/t6030-bisect-porcelain.sh +5 -5
index aa226381be..386841f7b7 100755
@@ -89,9 +89,9 @@ test_expect_success 'bisect start without -- takes unknown arg as pathspec' '
 	grep bar ".git/BISECT_NAMES"
 '
 
-test_expect_success 'bisect reset: back in the master branch' '
+test_expect_success 'bisect reset: back in the main branch' '
 	git bisect reset &&
-	echo "* master" > branch.expect &&
+	echo "* main" > branch.expect &&
 	git branch > branch.output &&
 	cmp branch.expect branch.output
 '
@@ -102,7 +102,7 @@ test_expect_success 'bisect reset: back in another branch' '
 	git bisect good $HASH1 &&
 	git bisect bad $HASH3 &&
 	git bisect reset &&
-	echo "  master" > branch.expect &&
+	echo "  main" > branch.expect &&
 	echo "* other" >> branch.expect &&
 	git branch > branch.output &&
 	cmp branch.expect branch.output
@@ -348,7 +348,7 @@ test_expect_success 'bisect skip many ranges' '
 
 test_expect_success 'bisect starting with a detached HEAD' '
 	git bisect reset &&
-	git checkout master^ &&
+	git checkout main^ &&
 	HEAD=$(git rev-parse --verify HEAD) &&
 	git bisect start &&
 	test $HEAD = $(cat .git/BISECT_START) &&
@@ -716,7 +716,7 @@ test_expect_success 'bisect: --no-checkout - target after breakage' '
 test_expect_success 'bisect: demonstrate identification of damage boundary' "
 	git bisect reset &&
 	git checkout broken &&
-	git bisect start broken master --no-checkout &&
+	git bisect start broken main --no-checkout &&
 	test_must_fail git bisect run \"\$SHELL_PATH\" -c '
 		GOOD=\$(git for-each-ref \"--format=%(objectname)\" refs/bisect/good-*) &&
 		git rev-list --objects BISECT_HEAD --not \$GOOD >tmp.\$\$ &&
t/t6040-tracking-info.sh +27 -27

148 lines not on this page · raw message

t/t6050-replace.sh +5 -5
index c80dc10b8f..56cf4ceb90 100755
@@ -133,9 +133,9 @@ test_expect_success 'tag replaced commit' '
 '
 
 test_expect_success '"git fsck" works' '
-     git fsck master >fsck_master.out &&
-     test_i18ngrep "dangling commit $R" fsck_master.out &&
-     test_i18ngrep "dangling tag $(git show-ref -s refs/tags/mytag)" fsck_master.out &&
+     git fsck main >fsck_main.out &&
+     test_i18ngrep "dangling commit $R" fsck_main.out &&
+     test_i18ngrep "dangling tag $(git show-ref -s refs/tags/mytag)" fsck_main.out &&
      test -z "$(git fsck)"
 '
 
@@ -218,7 +218,7 @@ test_expect_success 'create parallel branch without the bug' '
      git cherry-pick $HASH6 &&
      PARA6=$(git rev-parse --verify HEAD) &&
      git replace $HASH6 $PARA6 &&
-     git checkout master &&
+     git checkout main &&
      cur=$(git rev-parse --verify HEAD) &&
      test "$cur" = "$HASH7" &&
      git log --pretty=oneline | grep $PARA2 &&
@@ -461,7 +461,7 @@ test_expect_success GPG 'set up a merge commit with a mergetag' '
 	git commit -m "hello: 2 more lines from a test branch" &&
 	HASH9=$(git rev-parse --verify HEAD) &&
 	git tag -s -m "tag for testing with a mergetag" test_tag HEAD &&
-	git checkout master &&
+	git checkout main &&
 	git merge -s ours test_tag &&
 	HASH10=$(git rev-parse --verify HEAD) &&
 	git cat-file commit $HASH10 | grep "^mergetag object"
t/t6101-rev-parse-parents.sh +1 -1
index 7531262a5e..288a75c02b 100755
@@ -18,7 +18,7 @@ test_expect_success 'setup' '
 	test_commit second &&
 	git checkout --orphan tmp &&
 	test_commit start2 &&
-	git checkout master &&
+	git checkout main &&
 	git merge -m next --allow-unrelated-histories start2 &&
 	test_commit final &&
 
t/t6110-rev-list-sparse.sh +1 -1
index 656ac7fe9d..093536fd85 100755
@@ -10,7 +10,7 @@ test_expect_success setup '
 	git checkout -b side HEAD^ &&
 	test_commit D &&
 	test_commit E &&
-	git merge master
+	git merge main
 '
 
 test_expect_success 'rev-list --first-parent --boundary' '
t/t6111-rev-list-treesame.sh +3 -3
index 4244638285..90c8630e34 100755
@@ -33,13 +33,13 @@ test_expect_success setup '
 	git checkout other-branch &&
 	test_commit "Added other" other "Hello" C &&
 
-	git checkout master &&
+	git checkout main &&
 	test_merge D other-branch &&
 
 	git checkout third-branch &&
 	test_commit "Third file" third "Nothing" E &&
 
-	git checkout master &&
+	git checkout main &&
 	test_commit "file=Blah" file "Blah" F &&
 
 	test_tick && git merge --no-commit third-branch &&
@@ -56,7 +56,7 @@ test_expect_success setup '
 
 	test_tick && git revert I && note J &&
 
-	git checkout master &&
+	git checkout main &&
 	test_tick && git merge --no-ff fiddler-branch &&
 	note K &&
 
t/t6112-rev-list-filters-objects.sh +7 -7
index de0e5a5d36..c6729320ea 100755
@@ -223,7 +223,7 @@ test_expect_success 'verify sparse:oid=oid-ish omits top-level files' '
 	sort >expected &&
 
 	git -C r3 rev-list --quiet --objects --filter-print-omitted \
-		--filter=sparse:oid=master:pattern HEAD >revs &&
+		--filter=sparse:oid=main:pattern HEAD >revs &&
 	awk -f print_1.awk revs |
 	sed "s/~//" |
 	sort >observed &&
@@ -436,7 +436,7 @@ test_expect_success 'add sparse pattern blobs whose paths have reserved chars' '
 
 test_expect_success 'combine:... with more than two sub-filters' '
 	git -C r3 rev-list --objects \
-		--filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern \
+		--filter=combine:tree:3+blob:limit=40+sparse:oid=main:pattern \
 		HEAD >actual &&
 
 	expect_has HEAD "" &&
@@ -454,7 +454,7 @@ test_expect_success 'combine:... with more than two sub-filters' '
 	cp actual expect &&
 
 	git -C r3 rev-list --objects \
-		--filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern1%2brenamed%25 \
+		--filter=combine:tree:3+blob:limit=40+sparse:oid=main:pattern1%2brenamed%25 \
 		HEAD >actual &&
 	test_cmp expect actual &&
 
@@ -464,23 +464,23 @@ test_expect_success 'combine:... with more than two sub-filters' '
 	test_when_finished "rm -f trace1" &&
 	GIT_TRACE=$(pwd)/trace1 git -C r3 rev-list --objects \
 		--filter=tree:3 --filter=blob:limit=40 \
-		--filter=sparse:oid="master:p;at%ter+n" \
+		--filter=sparse:oid="main:p;at%ter+n" \
 		HEAD >actual &&
 
 	test_cmp expect actual &&
-	grep "Add to combine filter-spec: sparse:oid=master:p%3bat%25ter%2bn" \
+	grep "Add to combine filter-spec: sparse:oid=main:p%3bat%25ter%2bn" \
 		trace1 &&
 
 	# Repeat the above test, but this time, the characters to encode are in
 	# the LHS of the combined filter.
 	test_when_finished "rm -f trace2" &&
 	GIT_TRACE=$(pwd)/trace2 git -C r3 rev-list --objects \
-		--filter=sparse:oid=master:^~pattern \
+		--filter=sparse:oid=main:^~pattern \
 		--filter=tree:3 --filter=blob:limit=40 \
 		HEAD >actual &&
 
 	test_cmp expect actual &&
-	grep "Add to combine filter-spec: sparse:oid=master:%5e%7epattern" \
+	grep "Add to combine filter-spec: sparse:oid=main:%5e%7epattern" \
 		trace2
 '
 
t/t6120-describe.sh +10 -10
index f822d5d328..53617c9da9 100755
@@ -102,7 +102,7 @@ check_describe c-* --tags HEAD^^2
 check_describe B --tags HEAD^^2^
 check_describe e --tags HEAD^^^
 
-check_describe heads/master --all HEAD
+check_describe heads/main --all HEAD
 check_describe tags/c-* --all HEAD^
 check_describe tags/e --all HEAD^^^
 
@@ -403,15 +403,15 @@ test_expect_success ULIMIT_STACK_SIZE 'name-rev works in a deep repo' '
 	i=1 &&
 	while test $i -lt 8000
 	do
-		echo "commit refs/heads/master
+		echo "commit refs/heads/main
 committer A U Thor <[email protected]> $((1000000000 + $i * 100)) +0200
 data <<EOF
 commit #$i
 EOF"
-		test $i = 1 && echo "from refs/heads/master^0"
+		test $i = 1 && echo "from refs/heads/main^0"
 		i=$(($i + 1))
 	done | git fast-import &&
-	git checkout master &&
+	git checkout main &&
 	git tag far-far-away HEAD^ &&
 	echo "HEAD~4000 tags/far-far-away~3999" >expect &&
 	git name-rev HEAD~4000 >actual &&
@@ -442,7 +442,7 @@ test_expect_success 'describe complains about missing object' '
 '
 
 test_expect_success 'name-rev a rev shortly after epoch' '
-	test_when_finished "git checkout master" &&
+	test_when_finished "git checkout main" &&
 
 	git checkout --orphan no-timestamp-underflow &&
 	# Any date closer to epoch than the CUTOFF_DATE_SLOP constant
@@ -456,7 +456,7 @@ test_expect_success 'name-rev a rev shortly after epoch' '
 	test_cmp expect actual
 '
 
-# A--------------master
+# A--------------main
 #  \            /
 #   \----------M2
 #    \        /
@@ -487,10 +487,10 @@ test_expect_success 'name-rev covers all conditions while looking at parents' '
 		git checkout $A &&
 		git merge --no-ff HEAD@{1} && # M2
 
-		git checkout master &&
+		git checkout main &&
 		git merge --no-ff HEAD@{1} &&
 
-		echo "$B master^2^2~1^2" >expect &&
+		echo "$B main^2^2~1^2" >expect &&
 		git name-rev $B >actual &&
 
 		test_cmp expect actual
@@ -516,7 +516,7 @@ test_expect_success 'describe commits with disjoint bases' '
 		git checkout --orphan branch && rm file &&
 		echo B > file2 && git add file2 && git commit -m B &&
 		git tag B -a -m B &&
-		git merge --no-ff --allow-unrelated-histories master -m x &&
+		git merge --no-ff --allow-unrelated-histories main -m x &&
 
 		check_describe "A-3-*" HEAD
 	)
@@ -542,7 +542,7 @@ test_expect_success 'describe commits with disjoint bases 2' '
 		echo o >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:01" git commit -m o &&
 		echo B >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:02" git commit -m B &&
 		git tag B -a -m B &&
-		git merge --no-ff --allow-unrelated-histories master -m x &&
+		git merge --no-ff --allow-unrelated-histories main -m x &&
 
 		check_describe "B-3-*" HEAD
 	)
t/t6200-fmt-merge-msg.sh +25 -25

185 lines not on this page · raw message

t/t6302-for-each-ref-filter.sh +23 -23

138 lines not on this page · raw message

t/test-lib.sh +2 -2
index a78ff1e57e..307b75eafe 100644
@@ -257,13 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-3404|4013|5310)
+3404|4013|5310|6300)
 	# Avoid conflicts with patch series that are cooking at the same time
 	# as the patch series changing the default of `init.defaultBranch`.
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-5]*)
+[0-5]*|6[0-3]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#21 lore raw

PATCH 18/28 t64*: preemptively adjust alignment to prepare for `master` -> `main`

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

We are in the process of renaming the default branch name to main, which is two characters shorter than master. Therefore, some lines need to be adjusted in t6416, t6422 and t6427 that want to align text involving the default branch name.

---
 t/t6416-recursive-corner-cases.sh    | 8 ++++----
 t/t6422-merge-rename-corner-cases.sh | 4 ++--
 t/t6427-diff3-conflict-markers.sh    | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)
t/t6416-recursive-corner-cases.sh +4 -4
index 887c2195a9..dbccc3158a 100755
@@ -385,7 +385,7 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete' '
 		test_line_count = 2 out &&
 
 		git rev-parse >expect       \
-			master:file  B:file &&
+			master:file    B:file &&
 		git rev-parse   >actual      \
 			:1:file      :2:file &&
 		test_cmp expect actual
@@ -407,7 +407,7 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete, rev
 		test_line_count = 2 out &&
 
 		git rev-parse >expect       \
-			master:file  B:file &&
+			master:file    B:file &&
 		git rev-parse   >actual      \
 			:1:file      :3:file &&
 		test_cmp expect actual
@@ -1553,7 +1553,7 @@ test_expect_failure 'check conflicting modes for regular file' '
 # Setup:
 #          L1---L2
 #         /  \ /  \
-#   master    X    ?
+#     master    X    ?
 #         \  / \  /
 #          R1---R2
 #
@@ -1748,7 +1748,7 @@ test_expect_success 'check nested conflicts' '
 # Setup:
 #          L1---L2---L3
 #         /  \ /  \ /  \
-#   master    X1   X2   ?
+#     master    X1   X2   ?
 #         \  / \  / \  /
 #          R1---R2---R3
 #
t/t6422-merge-rename-corner-cases.sh +2 -2
index 78bfaf17f0..e40a1b686f 100755
@@ -1130,7 +1130,7 @@ test_conflicts_with_adds_and_renames() {
 	# Setup:
 	#          L
 	#         / \
-	#   master   ?
+	#     master   ?
 	#         \ /
 	#          R
 	#
@@ -1290,7 +1290,7 @@ test_conflicts_with_adds_and_renames add    add
 # Setup:
 #          L
 #         / \
-#   master   ?
+#     master   ?
 #         \ /
 #          R
 #
t/t6427-diff3-conflict-markers.sh +2 -2
index f4655bb358..f7620e677c 100755
@@ -43,7 +43,7 @@ test_expect_success 'check no merge base' '
 # Setup:
 #          L1
 #         /  \
-#   master    ?
+#     master    ?
 #         \  /
 #          R1
 #
@@ -101,7 +101,7 @@ test_expect_success 'check unique merge base' '
 # Setup:
 #          L1---L2--L3
 #         /  \ /      \
-#   master    X1       ?
+#     master    X1       ?
 #         \  / \      /
 #          R1---R2--R3
 #
Signature · 1 line
gitgitgadget
#23 lore raw

PATCH 20/28 t7[0-4]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Carefully excluding t7064, which sees independent development elsewhere at the time of writing, we use main as the default branch name in t7[0-4]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t7[0-4]*.sh &&
	   git checkout HEAD -- t7064\*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t7003-filter-branch.sh                |  40 ++++-----
 t/t7004-tag.sh                          |   8 +-
 t/t7030-verify-tag.sh                   |   2 +-
 t/t7060-wtstatus.sh                     |  26 +++---
 t/t7063-status-untracked-cache.sh       |  14 +--
 t/t7102-reset.sh                        |   6 +-
 t/t7113-post-index-change-hook.sh       |   2 +-
 t/t7201-co.sh                           | 110 ++++++++++++------------
 t/t7400-submodule-basic.sh              |  20 ++---
 t/t7403-submodule-sync.sh               |  10 +--
 t/t7406-submodule-update.sh             |  38 ++++----
 t/t7407-submodule-foreach.sh            |  24 +++---
 t/t7409-submodule-detached-work-tree.sh |   8 +-
 t/t7417-submodule-path-url.sh           |   2 +-
 t/test-lib.sh                           |   4 +-
 15 files changed, 157 insertions(+), 157 deletions(-)
t/t7003-filter-branch.sh +20 -20
index 36477cb1f4..e8df682c8d 100755
@@ -13,7 +13,7 @@ test_expect_success 'setup' '
 	mkdir dir &&
 	test_commit dir/D &&
 	test_commit E &&
-	git checkout master &&
+	git checkout main &&
 	test_commit C &&
 	git checkout branch &&
 	git merge C &&
@@ -25,7 +25,7 @@ test_expect_success 'setup' '
 # * G
 # *   Merge commit 'C' into branch
 # |\
-# | * (master) C
+# | * (main) C
 # * | E
 # * | dir/D
 # * | D
@@ -162,15 +162,15 @@ test_expect_success 'subdirectory filter result looks okay' '
 '
 
 test_expect_success 'more setup' '
-	git checkout master &&
+	git checkout main &&
 	mkdir subdir &&
 	echo A > subdir/new &&
 	git add subdir/new &&
 	test_tick &&
-	git commit -m "subdir on master" subdir/new &&
+	git commit -m "subdir on main" subdir/new &&
 	git rm A.t &&
 	test_tick &&
-	git commit -m "again subdir on master" &&
+	git commit -m "again subdir on main" &&
 	git merge branch
 '
 
@@ -199,7 +199,7 @@ test_expect_success 'author information is preserved' '
 	git branch preserved-author &&
 	(sane_unset GIT_AUTHOR_NAME &&
 	 git filter-branch -f --msg-filter "cat; \
-			test \$GIT_COMMIT != $(git rev-parse master) || \
+			test \$GIT_COMMIT != $(git rev-parse main) || \
 			echo Hallo" \
 		preserved-author) &&
 	git rev-list --author="B V Uips" preserved-author >actual &&
@@ -218,7 +218,7 @@ test_expect_success "remove a certain author's commits" '
 		else\
 			git commit-tree \"\$@\";\
 		fi" removed-author &&
-	cnt1=$(git rev-list master | wc -l) &&
+	cnt1=$(git rev-list main | wc -l) &&
 	cnt2=$(git rev-list removed-author | wc -l) &&
 	test $cnt1 -eq $(($cnt2 + 1)) &&
 	git rev-list --author="B V Uips" removed-author >actual &&
@@ -226,7 +226,7 @@ test_expect_success "remove a certain author's commits" '
 '
 
 test_expect_success 'barf on invalid name' '
-	test_must_fail git filter-branch -f master xy-problem &&
+	test_must_fail git filter-branch -f main xy-problem &&
 	test_must_fail git filter-branch -f HEAD^
 '
 
@@ -236,8 +236,8 @@ test_expect_success '"map" works in commit filter' '
 		mapped=\$(map \$parent) &&
 		actual=\$(echo \"\$@\" | sed \"s/^.*-p //\") &&
 		test \$mapped = \$actual &&
-		git commit-tree \"\$@\";" master~2..master &&
-	git rev-parse --verify master
+		git commit-tree \"\$@\";" main~2..main &&
+	git rev-parse --verify main
 '
 
 test_expect_success 'Name needing quotes' '
@@ -256,7 +256,7 @@ test_expect_success 'Name needing quotes' '
 
 test_expect_success 'Subdirectory filter with disappearing trees' '
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 
 	mkdir foo &&
 	touch foo/bar &&
@@ -275,7 +275,7 @@ test_expect_success 'Subdirectory filter with disappearing trees' '
 	git commit -m "Re-adding foo" &&
 
 	git filter-branch -f --subdirectory-filter foo &&
-	git rev-list master >actual &&
+	git rev-list main >actual &&
 	test_line_count = 3 actual
 '
 
@@ -332,7 +332,7 @@ test_expect_success 'Tag name filtering allows slashes in tag names' '
 	test_cmp expect actual
 '
 test_expect_success 'setup --prune-empty comparisons' '
-	git checkout --orphan master-no-a &&
+	git checkout --orphan main-no-a &&
 	git rm -rf . &&
 	unset test_tick &&
 	test_tick &&
@@ -343,7 +343,7 @@ test_expect_success 'setup --prune-empty comparisons' '
 	mkdir dir &&
 	test_commit dir/D dir/D.t dir/D dir/Dx &&
 	test_commit E E.t E Ex &&
-	git checkout master-no-a &&
+	git checkout main-no-a &&
 	test_commit C C.t C Cx &&
 	git checkout branch-no-a &&
 	git merge Cx -m "Merge tag '\''C'\'' into branch" &&
@@ -397,7 +397,7 @@ test_expect_success '--prune-empty is able to prune entire branch' '
 '
 
 test_expect_success '--remap-to-ancestor with filename filters' '
-	git checkout master &&
+	git checkout main &&
 	git reset --hard A &&
 	test_commit add-foo foo 1 &&
 	git branch moved-foo &&
@@ -407,15 +407,15 @@ test_expect_success '--remap-to-ancestor with filename filters' '
 	git branch moved-bar &&
 	test_commit change-foo foo 2 &&
 	git filter-branch -f --remap-to-ancestor \
-		moved-foo moved-bar A..master \
+		moved-foo moved-bar A..main \
 		-- -- foo &&
 	test $(git rev-parse moved-foo) = $(git rev-parse moved-bar) &&
-	test $(git rev-parse moved-foo) = $(git rev-parse master^) &&
+	test $(git rev-parse moved-foo) = $(git rev-parse main^) &&
 	test $orig_invariant = $(git rev-parse invariant)
 '
 
 test_expect_success 'automatic remapping to ancestor with filename filters' '
-	git checkout master &&
+	git checkout main &&
 	git reset --hard A &&
 	test_commit add-foo2 foo 1 &&
 	git branch moved-foo2 &&
@@ -425,10 +425,10 @@ test_expect_success 'automatic remapping to ancestor with filename filters' '
 	git branch moved-bar2 &&
 	test_commit change-foo2 foo 2 &&
 	git filter-branch -f \
-		moved-foo2 moved-bar2 A..master \
+		moved-foo2 moved-bar2 A..main \
 		-- -- foo &&
 	test $(git rev-parse moved-foo2) = $(git rev-parse moved-bar2) &&
-	test $(git rev-parse moved-foo2) = $(git rev-parse master^) &&
+	test $(git rev-parse moved-foo2) = $(git rev-parse main^) &&
 	test $orig_invariant = $(git rev-parse invariant2)
 '
 
t/t7004-tag.sh +4 -4
index 05f411c821..630fcde90b 100755
@@ -1583,7 +1583,7 @@ test_expect_success 'checking that branch head with --no-contains lists all but
 "
 
 test_expect_success 'merging original branch into this branch' '
-	git merge --strategy=ours master &&
+	git merge --strategy=ours main &&
         git tag v4.0
 '
 
@@ -1944,15 +1944,15 @@ test_expect_success ULIMIT_STACK_SIZE '--contains and --no-contains work in a de
 	i=1 &&
 	while test $i -lt 8000
 	do
-		echo "commit refs/heads/master
+		echo "commit refs/heads/main
 committer A U Thor <[email protected]> $((1000000000 + $i * 100)) +0200
 data <<EOF
 commit #$i
 EOF"
-		test $i = 1 && echo "from refs/heads/master^0"
+		test $i = 1 && echo "from refs/heads/main^0"
 		i=$(($i + 1))
 	done | git fast-import &&
-	git checkout master &&
+	git checkout main &&
 	git tag far-far-away HEAD^ &&
 	run_with_limited_stack git tag --contains HEAD >actual &&
 	test_must_be_empty actual &&
t/t7030-verify-tag.sh +1 -1
index 5c5bc32ccb..7a70df79a2 100755
@@ -17,7 +17,7 @@ test_expect_success GPG 'create signed tags' '
 	echo 3 >elif && git add elif &&
 	test_tick && git commit -m "third on side" &&
 
-	git checkout master &&
+	git checkout main &&
 	test_tick && git merge -S side &&
 	git tag -s -m merge merge &&
 
t/t7060-wtstatus.sh +13 -13
index d5218743e9..cb4e104e4b 100755
@@ -51,7 +51,7 @@ EOF
 		git checkout -b side HEAD^ &&
 		git rm foo &&
 		git commit -m delete &&
-		test_must_fail git merge master &&
+		test_must_fail git merge main &&
 		test_must_fail git commit --dry-run >../actual &&
 		test_i18ncmp ../expect ../actual &&
 		git status >../actual &&
@@ -124,18 +124,18 @@ test_expect_success 'git diff-index --cached -C shows 2 copies + 1 unmerged' '
 
 test_expect_success 'status when conflicts with add and rm advice (deleted by them)' '
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 	test_commit init main.txt init &&
 	git checkout -b second_branch &&
 	git rm main.txt &&
 	git commit -m "main.txt deleted on second_branch" &&
 	test_commit second conflict.txt second &&
-	git checkout master &&
+	git checkout main &&
 	test_commit on_second main.txt on_second &&
-	test_commit master conflict.txt master &&
+	test_commit main conflict.txt main &&
 	test_must_fail git merge second_branch &&
 	cat >expected <<\EOF &&
-On branch master
+On branch main
 You have unmerged paths.
   (fix conflicts and run "git commit")
   (use "git merge --abort" to abort the merge)
@@ -157,8 +157,8 @@ test_expect_success 'prepare for conflicts' '
 	git checkout -b conflict &&
 	test_commit one main.txt one &&
 	git branch conflict_second &&
-	git mv main.txt sub_master.txt &&
-	git commit -m "main.txt renamed in sub_master.txt" &&
+	git mv main.txt sub_main.txt &&
+	git commit -m "main.txt renamed in sub_main.txt" &&
 	git checkout conflict_second &&
 	git mv main.txt sub_second.txt &&
 	git commit -m "main.txt renamed in sub_second.txt"
@@ -176,7 +176,7 @@ You have unmerged paths.
 Unmerged paths:
   (use "git add/rm <file>..." as appropriate to mark resolution)
 	both deleted:    main.txt
-	added by them:   sub_master.txt
+	added by them:   sub_main.txt
 	added by us:     sub_second.txt
 
 no changes added to commit (use "git add" and/or "git commit -a")
@@ -189,7 +189,7 @@ EOF
 test_expect_success 'status when conflicts with only rm advice (both deleted)' '
 	git reset --hard conflict_second &&
 	test_must_fail git merge conflict &&
-	git add sub_master.txt &&
+	git add sub_main.txt &&
 	git add sub_second.txt &&
 	cat >expected <<\EOF &&
 On branch conflict_second
@@ -198,7 +198,7 @@ You have unmerged paths.
   (use "git merge --abort" to abort the merge)
 
 Changes to be committed:
-	new file:   sub_master.txt
+	new file:   sub_main.txt
 
 Unmerged paths:
   (use "git rm <file>..." to mark resolution)
@@ -209,12 +209,12 @@ EOF
 	git status --untracked-files=no >actual &&
 	test_i18ncmp expected actual &&
 	git reset --hard &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'status --branch with detached HEAD' '
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	git status --branch --porcelain >actual &&
 	cat >expected <<-EOF &&
 	## HEAD (no branch)
@@ -230,7 +230,7 @@ test_expect_success 'status --branch with detached HEAD' '
 ## Duplicate the above test and verify --porcelain=v1 arg parsing.
 test_expect_success 'status --porcelain=v1 --branch with detached HEAD' '
 	git reset --hard &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	git status --branch --porcelain=v1 >actual &&
 	cat >expected <<-EOF &&
 	## HEAD (no branch)
t/t7063-status-untracked-cache.sh +7 -7
index a682a3d826..3b41d563d5 100755
@@ -475,7 +475,7 @@ EOF
 test_expect_success 'set up sparse checkout' '
 	echo "done/[a-z]*" >.git/info/sparse-checkout &&
 	test_config core.sparsecheckout true &&
-	git checkout master &&
+	git checkout main &&
 	git update-index --force-untracked-cache &&
 	git status --porcelain >/dev/null && # prime the cache
 	test_path_is_missing done/.gitignore &&
@@ -734,13 +734,13 @@ test_expect_success 'test ident field is working' '
 test_expect_success 'untracked cache survives a checkout' '
 	git commit --allow-empty -m empty &&
 	test-tool dump-untracked-cache >../before &&
-	test_when_finished  "git checkout master" &&
+	test_when_finished  "git checkout main" &&
 	git checkout -b other_branch &&
 	test-tool dump-untracked-cache >../after &&
 	test_cmp ../before ../after &&
 	test_commit test &&
 	test-tool dump-untracked-cache >../before &&
-	git checkout master &&
+	git checkout main &&
 	test-tool dump-untracked-cache >../after &&
 	test_cmp ../before ../after
 '
@@ -775,7 +775,7 @@ test_expect_success SYMLINKS '"status" after symlink replacement should be clean
 	git checkout HEAD~ &&
 	status_is_clean &&
 	status_is_clean &&
-	git checkout master &&
+	git checkout main &&
 	avoid_racy &&
 	status_is_clean &&
 	status_is_clean
@@ -786,7 +786,7 @@ test_expect_success SYMLINKS '"status" after symlink replacement should be clean
 	git checkout HEAD~ &&
 	status_is_clean &&
 	status_is_clean &&
-	git checkout master &&
+	git checkout main &&
 	avoid_racy &&
 	status_is_clean &&
 	status_is_clean
@@ -810,7 +810,7 @@ test_expect_success '"status" after file replacement should be clean with UC=tru
 	git checkout HEAD~ &&
 	status_is_clean &&
 	status_is_clean &&
-	git checkout master &&
+	git checkout main &&
 	avoid_racy &&
 	status_is_clean &&
 	test-tool dump-untracked-cache >../actual &&
@@ -828,7 +828,7 @@ test_expect_success '"status" after file replacement should be clean with UC=fal
 	git checkout HEAD~ &&
 	status_is_clean &&
 	status_is_clean &&
-	git checkout master &&
+	git checkout main &&
 	avoid_racy &&
 	status_is_clean &&
 	status_is_clean
t/t7102-reset.sh +3 -3
index b1affb001f..9dfed50354 100755
@@ -145,7 +145,7 @@ test_expect_success 'trying to do reset --soft with pending merge should fail' '
 	printf "1st line 2nd file\n2nd line 2nd file\n3rd line" >secondfile &&
 	git commit -a -m "the change in branch2" &&
 
-	git checkout master &&
+	git checkout main &&
 	git branch -D branch1 branch2 &&
 	check_changes $head5
 '
@@ -167,7 +167,7 @@ test_expect_success 'trying to do reset --soft with pending checkout merge shoul
 	printf "1st line 2nd file\n2nd line 2nd file\n3rd line" >secondfile &&
 	git commit -a -m "the line in branch3" &&
 
-	git checkout master &&
+	git checkout main &&
 	git branch -D branch3 branch4 &&
 	check_changes $head5
 '
@@ -380,7 +380,7 @@ test_expect_success '--hard reset to ORIG_HEAD should clear a fast-forward merge
 	git reset --hard ORIG_HEAD &&
 	check_changes $head5 &&
 
-	git checkout master &&
+	git checkout main &&
 	git branch -D branch1 branch2 &&
 	check_changes $head5
 '
t/t7113-post-index-change-hook.sh +1 -1
index f011ad7eec..2e38428176 100755
@@ -85,7 +85,7 @@ test_expect_success 'test checkout and reset trigger the hook' '
 	EOF
 	: force index to be dirty &&
 	test-tool chmtime +60 dir1/file1.txt &&
-	git checkout master &&
+	git checkout main &&
 	test_path_is_file testsuccess && rm -f testsuccess &&
 	test_path_is_missing testfailure &&
 	test-tool chmtime +60 dir1/file1.txt &&
t/t7201-co.sh +55 -55

334 lines not on this page · raw message

t/t7400-submodule-basic.sh +10 -10
index fec7e0299d..ce320807d4 100755
@@ -124,7 +124,7 @@ inspect() {
 }
 
 test_expect_success 'submodule add' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -223,7 +223,7 @@ test_expect_success 'submodule add --branch' '
 	echo "refs/heads/initial" >expect-head &&
 	cat <<-\EOF >expect-heads &&
 	refs/heads/initial
-	refs/heads/master
+	refs/heads/main
 	EOF
 
 	(
@@ -241,7 +241,7 @@ test_expect_success 'submodule add --branch' '
 '
 
 test_expect_success 'submodule add with ./ in path' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -257,7 +257,7 @@ test_expect_success 'submodule add with ./ in path' '
 '
 
 test_expect_success 'submodule add with /././ in path' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -273,7 +273,7 @@ test_expect_success 'submodule add with /././ in path' '
 '
 
 test_expect_success 'submodule add with // in path' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -289,7 +289,7 @@ test_expect_success 'submodule add with // in path' '
 '
 
 test_expect_success 'submodule add with /.. in path' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -305,7 +305,7 @@ test_expect_success 'submodule add with /.. in path' '
 '
 
 test_expect_success 'submodule add with ./, /.. and // in path' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	(
 		cd addtest &&
@@ -335,7 +335,7 @@ test_expect_success !CYGWIN 'submodule add with \\ in path' '
 '
 
 test_expect_success 'submodule add in subdirectory' '
-	echo "refs/heads/master" >expect &&
+	echo "refs/heads/main" >expect &&
 
 	mkdir addtest/sub &&
 	(
@@ -557,7 +557,7 @@ test_expect_success 'status should be "up-to-date" after update' '
 
 test_expect_success 'checkout superproject with subproject already present' '
 	git checkout initial &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'apply submodule diff' '
@@ -574,7 +574,7 @@ test_expect_success 'apply submodule diff' '
 	git checkout second &&
 	git apply --index P.diff &&
 
-	git diff --cached master >staged &&
+	git diff --cached main >staged &&
 	test_must_be_empty staged
 '
 
t/t7403-submodule-sync.sh +5 -5
index 0726799e74..848d4e7db7 100755
@@ -78,7 +78,7 @@ test_expect_success 'change submodule url' '
 	(
 		cd super &&
 		cd submodule &&
-		git checkout master &&
+		git checkout main &&
 		git pull
 	) &&
 	mv submodule moved-submodule &&
@@ -112,7 +112,7 @@ test_expect_success '"git submodule sync" should update submodule URLs' '
 	)" &&
 	(
 		cd super-clone/submodule &&
-		git checkout master &&
+		git checkout main &&
 		git pull
 	) &&
 	(
@@ -140,7 +140,7 @@ test_expect_success '"git submodule sync --recursive" should update all submodul
 	)" &&
 	(
 		cd super-clone/submodule/sub-submodule &&
-		git checkout master &&
+		git checkout main &&
 		git pull
 	)
 '
@@ -168,7 +168,7 @@ test_expect_success '"git submodule sync" should update submodule URLs - subdire
 	)" &&
 	(
 		cd super-clone/submodule &&
-		git checkout master &&
+		git checkout main &&
 		git pull
 	) &&
 	(
@@ -199,7 +199,7 @@ test_expect_success '"git submodule sync --recursive" should update all submodul
 	)" &&
 	(
 		cd super-clone/submodule/sub-submodule &&
-		git checkout master &&
+		git checkout main &&
 		git pull
 	)
 '
t/t7406-submodule-update.sh +19 -19
index acb8766ac2..87097846cb 100755
@@ -14,10 +14,10 @@ submodule and "git submodule update --rebase/--merge" does not detach the HEAD.
 
 compare_head()
 {
-    sha_master=$(git rev-list --max-count=1 master)
+    sha_main=$(git rev-list --max-count=1 main)
     sha_head=$(git rev-list --max-count=1 HEAD)
 
-    test "$sha_master" = "$sha_head"
+    test "$sha_main" = "$sha_head"
 }
 
 
@@ -262,14 +262,14 @@ test_expect_success 'submodule update --remote should fetch upstream changes wit
 		cd super &&
 		git submodule update --remote --force submodule &&
 		git -C submodule log -1 --oneline >actual &&
-		git -C ../submodule log -1 --oneline master >expect &&
+		git -C ../submodule log -1 --oneline main >expect &&
 		test_cmp expect actual &&
 		git checkout -b test-branch &&
 		git submodule update --remote --force submodule &&
 		git -C submodule log -1 --oneline >actual &&
 		git -C ../submodule log -1 --oneline test-branch >expect &&
 		test_cmp expect actual &&
-		git checkout master &&
+		git checkout main &&
 		git branch -d test-branch &&
 		git reset --hard HEAD^
 	)
@@ -282,7 +282,7 @@ test_expect_success 'local config should override .gitmodules branch' '
 	 git add file &&
 	 test_tick &&
 	 git commit -m "upstream line5" &&
-	 git checkout master
+	 git checkout main
 	) &&
 	(cd super &&
 	 git config submodule.submodule.branch test-branch &&
@@ -292,9 +292,9 @@ test_expect_success 'local config should override .gitmodules branch' '
 	)
 '
 
-test_expect_success 'submodule update --rebase staying on master' '
+test_expect_success 'submodule update --rebase staying on main' '
 	(cd super/submodule &&
-	  git checkout master
+	  git checkout main
 	) &&
 	(cd super &&
 	 (cd submodule &&
@@ -306,7 +306,7 @@ test_expect_success 'submodule update --rebase staying on master' '
 	)
 '
 
-test_expect_success 'submodule update --merge staying on master' '
+test_expect_success 'submodule update --merge staying on main' '
 	(cd super/submodule &&
 	  git reset --hard HEAD~1
 	) &&
@@ -609,7 +609,7 @@ test_expect_success 'submodule update - update=none in .git/config' '
 	(cd super &&
 	 git config submodule.submodule.update none &&
 	 (cd submodule &&
-	  git checkout master &&
+	  git checkout main &&
 	  compare_head
 	 ) &&
 	 git diff --name-only >out &&
@@ -629,7 +629,7 @@ test_expect_success 'submodule update - update=none in .git/config but --checkou
 	(cd super &&
 	 git config submodule.submodule.update none &&
 	 (cd submodule &&
-	  git checkout master &&
+	  git checkout main &&
 	  compare_head
 	 ) &&
 	 git diff --name-only >out &&
@@ -689,7 +689,7 @@ test_expect_success 'submodule update continues after checkout error' '
 test_expect_success 'submodule update continues after recursive checkout error' '
 	(cd super &&
 	 git reset --hard HEAD &&
-	 git checkout master &&
+	 git checkout main &&
 	 git submodule update &&
 	 (cd submodule &&
 	  git submodule add ../submodule subsubmodule &&
@@ -733,7 +733,7 @@ test_expect_success 'submodule update continues after recursive checkout error'
 
 test_expect_success 'submodule update exit immediately in case of merge conflict' '
 	(cd super &&
-	 git checkout master &&
+	 git checkout main &&
 	 git reset --hard HEAD &&
 	 (cd submodule &&
 	  (cd subsubmodule &&
@@ -751,7 +751,7 @@ test_expect_success 'submodule update exit immediately in case of merge conflict
 	 git add submodule2 &&
 	 git commit -m "two_new_submodule_commits" &&
 	 (cd submodule &&
-	  git checkout master &&
+	  git checkout main &&
 	  test_commit "conflict" file &&
 	  echo "conflict" > file
 	 ) &&
@@ -770,7 +770,7 @@ test_expect_success 'submodule update exit immediately in case of merge conflict
 
 test_expect_success 'submodule update exit immediately after recursive rebase error' '
 	(cd super &&
-	 git checkout master &&
+	 git checkout main &&
 	 git reset --hard HEAD &&
 	 (cd submodule &&
 	  git reset --hard HEAD &&
@@ -786,7 +786,7 @@ test_expect_success 'submodule update exit immediately after recursive rebase er
 	 git add submodule2 &&
 	 git commit -m "two_new_submodule_commits" &&
 	 (cd submodule &&
-	  git checkout master &&
+	  git checkout main &&
 	  test_commit "conflict2" file &&
 	  echo "conflict" > file
 	 ) &&
@@ -878,21 +878,21 @@ test_expect_success 'submodule update places git-dir in superprojects git-dir re
 	git clone subsubsuper_update_r subsubsuper_update_r2 &&
 	(cd subsubsuper_update_r2 &&
 	 test_commit "update_subsubsuper" file &&
-	 git push origin master
+	 git push origin main
 	) &&
 	git clone subsuper_update_r subsuper_update_r2 &&
 	(cd subsuper_update_r2 &&
 	 test_commit "update_subsuper" file &&
 	 git submodule add ../subsubsuper_update_r subsubmodule &&
 	 git commit -am "subsubmodule" &&
-	 git push origin master
+	 git push origin main
 	) &&
 	git clone super_update_r super_update_r2 &&
 	(cd super_update_r2 &&
 	 test_commit "update_super" file &&
 	 git submodule add ../subsuper_update_r submodule &&
 	 git commit -am "submodule" &&
-	 git push origin master
+	 git push origin main
 	) &&
 	rm -rf super_update_r2 &&
 	git clone super_update_r super_update_r2 &&
@@ -911,7 +911,7 @@ test_expect_success 'submodule update places git-dir in superprojects git-dir re
 
 test_expect_success 'submodule add properly re-creates deeper level submodules' '
 	(cd super &&
-	 git reset --hard master &&
+	 git reset --hard main &&
 	 rm -rf deeper/ &&
 	 git submodule add --force ../submodule deeper/submodule
 	)
t/t7407-submodule-foreach.sh +12 -12
index 6b2aa917e1..8ebcaa3694 100755
@@ -277,13 +277,13 @@ sub1sha1_short=$(cd clone3/sub1 && git rev-parse --short HEAD)
 sub2sha1_short=$(cd clone3/sub2 && git rev-parse --short HEAD)
 
 cat > expect <<EOF
- $nested1sha1 nested1 (heads/master)
- $nested2sha1 nested1/nested2 (heads/master)
- $nested3sha1 nested1/nested2/nested3 (heads/master)
- $submodulesha1 nested1/nested2/nested3/submodule (heads/master)
+ $nested1sha1 nested1 (heads/main)
+ $nested2sha1 nested1/nested2 (heads/main)
+ $nested3sha1 nested1/nested2/nested3 (heads/main)
+ $submodulesha1 nested1/nested2/nested3/submodule (heads/main)
  $sub1sha1 sub1 ($sub1sha1_short)
  $sub2sha1 sub2 ($sub2sha1_short)
- $sub3sha1 sub3 (heads/master)
+ $sub3sha1 sub3 (heads/main)
 EOF
 
 test_expect_success 'test "status --recursive"' '
@@ -295,10 +295,10 @@ test_expect_success 'test "status --recursive"' '
 '
 
 cat > expect <<EOF
- $nested1sha1 nested1 (heads/master)
+ $nested1sha1 nested1 (heads/main)
 +$nested2sha1 nested1/nested2 (file2~1)
- $nested3sha1 nested1/nested2/nested3 (heads/master)
- $submodulesha1 nested1/nested2/nested3/submodule (heads/master)
+ $nested3sha1 nested1/nested2/nested3 (heads/main)
+ $submodulesha1 nested1/nested2/nested3/submodule (heads/main)
 EOF
 
 test_expect_success 'ensure "status --cached --recursive" preserves the --cached flag' '
@@ -316,13 +316,13 @@ test_expect_success 'ensure "status --cached --recursive" preserves the --cached
 nested2sha1=$(git -C clone3/nested1/nested2 rev-parse HEAD)
 
 cat > expect <<EOF
- $nested1sha1 ../nested1 (heads/master)
+ $nested1sha1 ../nested1 (heads/main)
 +$nested2sha1 ../nested1/nested2 (file2)
- $nested3sha1 ../nested1/nested2/nested3 (heads/master)
- $submodulesha1 ../nested1/nested2/nested3/submodule (heads/master)
+ $nested3sha1 ../nested1/nested2/nested3 (heads/main)
+ $submodulesha1 ../nested1/nested2/nested3/submodule (heads/main)
  $sub1sha1 ../sub1 ($sub1sha1_short)
  $sub2sha1 ../sub2 ($sub2sha1_short)
- $sub3sha1 ../sub3 (heads/master)
+ $sub3sha1 ../sub3 (heads/main)
 EOF
 
 test_expect_success 'test "status --recursive" from sub directory' '
t/t7409-submodule-detached-work-tree.sh +4 -4
index fc018e3638..727490eb15 100755
@@ -35,7 +35,7 @@ test_expect_success 'submodule on detached working tree' '
 			git rev-parse --verify HEAD >actual &&
 			test_cmp ../../../../expect actual
 		) &&
-		git push origin master
+		git push origin main
 	) &&
 	mkdir home2 &&
 	(
@@ -44,7 +44,7 @@ test_expect_success 'submodule on detached working tree' '
 		GIT_WORK_TREE="$(pwd)" &&
 		GIT_DIR="$(pwd)/.dotfiles" &&
 		export GIT_WORK_TREE GIT_DIR &&
-		git checkout master &&
+		git checkout main &&
 		git submodule update --init &&
 		(
 			unset GIT_WORK_TREE GIT_DIR &&
@@ -64,10 +64,10 @@ test_expect_success 'submodule on detached working pointed by core.worktree' '
 		git clone --bare ../remote "$GIT_DIR" &&
 		git config core.bare false &&
 		git config core.worktree .. &&
-		git checkout master &&
+		git checkout main &&
 		git submodule add ../bundle1 .vim/bundle/dupe &&
 		test_commit "dupe" &&
-		git push origin master
+		git push origin main
 	) &&
 	(
 		cd home &&
t/t7417-submodule-path-url.sh +1 -1
index f7e7e94d7b..1c9181aee7 100755
@@ -36,7 +36,7 @@ test_expect_success MINGW 'submodule paths disallows trailing spaces' '
 	sed "s/sub/sub /" <tree >tree.new &&
 	tree=$(git -C super mktree <tree.new) &&
 	commit=$(echo with space | git -C super commit-tree $tree) &&
-	git -C super update-ref refs/heads/master $commit &&
+	git -C super update-ref refs/heads/main $commit &&
 
 	test_must_fail git clone --recurse-submodules super dst 2>err &&
 	test_i18ngrep "sub " err
t/test-lib.sh +2 -2
index 44b4bba0cb..815d7b21fe 100644
@@ -257,13 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-3404|4013|5310|6300)
+3404|4013|5310|6300|7064)
 	# Avoid conflicts with patch series that are cooking at the same time
 	# as the patch series changing the default of `init.defaultBranch`.
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-6]*)
+[0-6]*|7[0-4]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#35 lore raw
In reply to Johannes Schindelin via GitGitGadget
Quoted 3 lines · Johannes Schindelin via GitGitGadget

This is the big one. This changes the default of init.defaultBranch to main, reflecting what many open source projects already did (which was followed by GitHub, Azure Repos and others).

I want to plant a big red flag here for the record.

I am against this change.

At the very least in the manner it is being made. I started a separate thread [1] explaining the reasoning.

In addition to the manner--which I argue in that other thread should be done for Git 3.0--I also object to the reasoning behind the change.

Let me know if you would rather hear my arguments against the reasoning here, or in the other thread.

Cheers.

[1] https://lore.kernel.org/git/CAMP44s3BJ3dGsLJ-6yA-Po459=+m826KD9an4+P3qOY1vkbxZg@mail.gmail.com/

Signature · 1 line
Felipe Contreras
#32 lore raw

Re: [PATCH 28/28] Change the default branch name to `main`

In reply to Don Goodman-Wilson via GitGitGadget
Quoted 5 lines · Don Goodman-Wilson via GitGitGadget

The current default name for the initial branch is a loaded term, and many Open Source projects renamed their principal branches already. A common choice appears to be main.

Let's follow their lead and change the default of init.defaultBranch.

I think it makes sense to split this change off from a 28-series test cleanup series.

t/lib-submodule-update.sh create_lib_submodule_repo () { · line 147

Quoted 10 lines
t/lib-submodule-update.sh +1 -1
index bd3fa3c6da..1b0abcb0f8 100644
@@ -144,7 +144,7 @@ create_lib_submodule_repo () {
 		git checkout -b valid_sub1 &&
 		git revert HEAD &&
 
-		git checkout "${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME-master}"
+		git checkout "${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME-main}"

Earlier in that function we're doing a "git init". With all this test cleanup I wonder why not just "git rev-parse --abbrev-ref" to get the default name, instead of carrying the hardcoding forward.

#15 lore raw

Re: [PATCH 14/28] t55[23]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget
Quoted 8 lines · Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- t55[23]*.sh)
Quoted 5 lines

Note that t5533 contains a variation of the name master (naster) that we rename here, too.

This commit allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for that range of tests.

There's also a "naster" in t/t1402-check-ref-format.sh that's not changed here and missed by 02/28 of this series.

Is there some meaning to the name "nain" and "naster" that I'm missing? If not can we just call this "topic" or something while we're at it? I.e. this on top (just s/nain/topic/g):

t/t5533-push-cas.sh +6 -6
index 9fcec604c3..4e33ec1fb9 100755
@@ -201,12 +201,12 @@ test_expect_success 'cover everything with default force-with-lease (protected)'
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	git ls-remote src refs/heads/\* >expect &&
 	(
 		cd dst &&
-		test_must_fail git push --force-with-lease origin main main:nain
+		test_must_fail git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote src refs/heads/\* >actual &&
 	test_cmp expect actual
@@ -216,16 +216,16 @@ test_expect_success 'cover everything with default force-with-lease (allowed)' '
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	(
 		cd dst &&
 		git fetch &&
-		git push --force-with-lease origin main main:nain
+		git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote dst refs/heads/main |
-	sed -e "s/main/nain/" >expect &&
-	git ls-remote src refs/heads/nain >actual &&
+	sed -e "s/main/topic/" >expect &&
+	git ls-remote src refs/heads/topic >actual &&
 	test_cmp expect actual
 '
 
#36 lore raw
In reply to Johannes Schindelin via GitGitGadget
Quoted 3 lines · Johannes Schindelin via GitGitGadget

This is the big one. This changes the default of init.defaultBranch to main, reflecting what many open source projects already did (which was followed by GitHub, Azure Repos and others).

I don't have an issue with the end goal of s/master/main|$whatever/ as UX here as noted in previous related review rounds. But I don't think this series as it stands is anywhere near ready.

This is 27 patches of s/master/main/ in the tests, followed by making the change to the default in refs.c without as much as a single documentation update to inform users of the change.

I don't see the point in doing these sorts of test suite changes, it just seems like needless churn. But I have not read the whole backlog of previous iterations of this & related patches, so bear with me.

Why not instead do what we did when we added protocol v2 to the tests, e.g. in 8a1b0978ab ("test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate", 2019-12-23) we simply set the t5515 test to always run with protocol v1. If you'd do this:

    diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh
    index 70a9d2d8ab..939c8b2f83 100755
    --- a/t/t5515-fetch-merge-logic.sh
    +++ b/t/t5515-fetch-merge-logic.sh
    @@ -11,6 +11,9 @@ test_description='Merge logic in fetch'
     GIT_TEST_PROTOCOL_VERSION=0
     export GIT_TEST_PROTOCOL_VERSION
     
    +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
    +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
    +
     . ./test-lib.sh
     
     build_script () {

Of course that also needs:

index fa347ed3e1..2d700a171b 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -1711,10 +1711,8 @@ test_lazy_prereq SHA1 '
test_lazy_prereq REBASE_P '
test -z "$GIT_TEST_SKIP_REBASE_P"
'
-# Special-purpose prereq for transitioning to a new default branch name:
-# Some tests need more than just a mindless (case-preserving) s/master/main/g -# replacement. The non-trivial adjustments are guarded behind this -# prerequisite, acting kind of as a feature flag -test_lazy_prereq PREPARE_FOR_MAIN_BRANCH '
- test "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" = main
+
+test_lazy_prereq MAIN_BRANCH_IS_MASTER '
+ test -z "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" ||
+ test "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" = "master"
'

Because (but see "later" a few paragraphs later), the logic as it stands on "master" is entirely backwards & broken. I.e. if you don't set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME or set it to "master" we now skip a bunch of tests ... which only work if the value is "master". If you set it to "main" they'll break.

Then instead of ending up with a hardcoding of "main" we'd be able to run the tests with a new custom branch name (even one with whitespace in it). That coverage is plenty to test any branch name hardcoding.

The remaining tests that would still have "master" would then just be dealt with by the same thing we did for the too-protocol-v1-specific tests, i.e.:

    diff --git a/t/t3502-cherry-pick-merge.sh b/t/t3502-cherry-pick-merge.sh
    index 8b635a196d..354f9bd851 100755
    --- a/t/t3502-cherry-pick-merge.sh
    +++ b/t/t3502-cherry-pick-merge.sh
    @@ -8,6 +8,8 @@ test_description='cherry picking and reverting a merge
     
     '
     
    +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
    +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
     . ./test-lib.sh
     
     test_expect_success setup '

Except unlike protocol v1/v2 we're really not gaining anything in coverage by going further, it's not the point of any of these tests to test for the default branch name. It's a *lot* of churn,

"Later": After writing the above I see from 704fed9ea2 ("tests: start moving to a different default main branch name", 2020-10-23) that this state of affairs is intentional. But doesn't discuss why the more usual (because we've done it that way a few times before) v1/v2-esque transition wasn't done instead.

Doing it the other way still seems better. We're now not running our full tests in anticipation for this series landing on "master", and after applying this we're still not running all of them.

Anyway, enough with discussing this detail of the test suite churn. My main objection to this version of it is:

After this series as it stands lands what's a rather big UI change in git isn't discussed *anywhere* in the docs.

I'm not saying we need some similar s/master/main/g in Documentation/ as what's being done here in t/, but I think a bare minimum for a rather big UI change like this is:

1) Let's at least talk about it in some way in git-init(1), i.e. that it used to be "master" before version so-and-so and is now different. With this series applied we still say:

Documentation/git-init.txt:If not specified, fall back to the default name: master.

2) Ditto in the init.defaultBranch and things like that

3) After all this effort at eliminating "master" entirely in the tests we're still shipping a sample hook that expects "master" on "git init", and breaks now that it's "main"

And maybe stuff like:

4) Have "git init" emit some new advice message saying that the default has changed and we've init-ed a new repo with a "main" branch.

Our primary concern should be the vast majority of users who don't follow this topic on Twitter, don't read this mailing list, and are just going to waste 10 minutes of their day because some script they've had working for years using "git init" did something unexpected.

Let's at least aim to make that 5 minutes instead by making the change more discoverable.

#33 lore raw

Re: [PATCH 28/28] Change the default branch name to `main`

In reply to Ævar Arnfjörð Bjarmason

Hi Ævar,

Quoted 11 lines · Ævar Arnfjörð Bjarmason
Quoted 5 lines · Don Goodman-Wilson via GitGitGadget

The current default name for the initial branch is a loaded term, and many Open Source projects renamed their principal branches already. A common choice appears to be main.

Let's follow their lead and change the default of init.defaultBranch.

I think it makes sense to split this change off from a 28-series test cleanup series.

It is not a test cleanup. It is a series of 27 patches preparing the test suite for the change made in the 28th patch.

I don't think that it is a good idea to split off that 28th patch from the patches whose entire purpose is to prepare for that 28th patch.

Quoted 9 lines
Quoted 9 lines
t/lib-submodule-update.sh +0 -0
index bd3fa3c6da..1b0abcb0f8 100644
@@ -144,7 +144,7 @@ create_lib_submodule_repo () {
 		git checkout -b valid_sub1 &&
 		git revert HEAD &&
 
Quoted 6 lines

t/lib-submodule-update.sh create_lib_submodule_repo () { · line 147

Quoted 2 lines
t/lib-submodule-update.sh +1 -1
-		git checkout "${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME-master}"
+		git checkout "${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME-main}"

Earlier in that function we're doing a "git init". With all this test cleanup I wonder why not just "git rev-parse --abbrev-ref" to get the default name, instead of carrying the hardcoding forward.

My goal was to keep everything as close to its original as possible. In v2.29.2, this line reads:

git checkout master

See https://github.com/git/git/blob/v2.29.2/t/lib-submodule-update.sh#L147
to convince yourself.

Personally, I would have used something like

		main=$(git symbolic-ref --short HEAD) &&
		[...]
		git checkout $main

instead of what you suggested. That's a topic for another patch (series), though.

Ciao,
Dscho

#16 lore raw

Re: [PATCH 14/28] t55[23]*: adjust the references to the default branch name "main"

In reply to Ævar Arnfjörð Bjarmason

Hi Ævar,

Quoted 11 lines · Ævar Arnfjörð Bjarmason
Quoted 8 lines · Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- t55[23]*.sh)
Quoted 8 lines
Quoted 5 lines

Note that t5533 contains a variation of the name master (naster) that we rename here, too.

This commit allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for that range of tests.

There's also a "naster" in t/t1402-check-ref-format.sh that's not changed here and missed by 02/28 of this series.

Whoops, you're right. It's not even new: 7c3f847aad7 (check-ref-format --branch: do not expand @{...} outside repository, 2017-10-17) introduced it. I missed that one, thank you for pointing it out.

I will follow up with a separate patch to fix that, once the dust settles on this here patch series.

Quoted 1 line

Is there some meaning to the name "nain" and "naster" that I'm missing?

I guess the original reasoning was to stay close to the original default branch name. I'm not sure whether it is worth changing that idea. Like, if you ask me whether it hurts to use "nain"? I looked up possible connotations, and the most common one was "grandmother", and that's rather endearing to me.

Ciao,
Dscho

Quoted 44 lines

If not can we just call this "topic" or something while we're at it? I.e. this on top (just s/nain/topic/g):

t/t5533-push-cas.sh +6 -6
index 9fcec604c3..4e33ec1fb9 100755
@@ -201,12 +201,12 @@ test_expect_success 'cover everything with default force-with-lease (protected)'
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	git ls-remote src refs/heads/\* >expect &&
 	(
 		cd dst &&
-		test_must_fail git push --force-with-lease origin main main:nain
+		test_must_fail git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote src refs/heads/\* >actual &&
 	test_cmp expect actual
@@ -216,16 +216,16 @@ test_expect_success 'cover everything with default force-with-lease (allowed)' '
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	(
 		cd dst &&
 		git fetch &&
-		git push --force-with-lease origin main main:nain
+		git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote dst refs/heads/main |
-	sed -e "s/main/nain/" >expect &&
-	git ls-remote src refs/heads/nain >actual &&
+	sed -e "s/main/topic/" >expect &&
+	git ls-remote src refs/heads/topic >actual &&
 	test_cmp expect actual
 '
 
#37 lore raw
In reply to Ævar Arnfjörð Bjarmason

Hi Ævar,

Quoted 6 lines · Ævar Arnfjörð Bjarmason
Quoted 3 lines · Johannes Schindelin via GitGitGadget

This is the big one. This changes the default of init.defaultBranch to main, reflecting what many open source projects already did (which was followed by GitHub, Azure Repos and others).

Quoted 7 lines

I don't have an issue with the end goal of s/master/main|$whatever/ as UX here as noted in previous related review rounds. But I don't think this series as it stands is anywhere near ready.

This is 27 patches of s/master/main/ in the tests, followed by making the change to the default in refs.c without as much as a single documentation update to inform users of the change.

Of course, this is _the one_ patch series mentioned in
https://github.com/gitgitgadget/git/pull/655 that does _not_ link back to the meta-PR.

So you're right, on its own, these 28 patches do not make sense.

And if you split off the 28th patch, the remaining 27 patches make even less sense.

The reason why I partitioned the changes this way was that it is a _ton_ of patches to review, and in many ways, these 28 patches are the most important ones to review (I didn't want to just rely on the CI builds passing, I reviewed those patches carefully, multiple times, to make sure that they made sense in the goal to transition to main).

I will respond to the rest of your concerns later, Dscho

Quoted 123 lines

I don't see the point in doing these sorts of test suite changes, it just seems like needless churn. But I have not read the whole backlog of previous iterations of this & related patches, so bear with me.

Why not instead do what we did when we added protocol v2 to the tests, e.g. in 8a1b0978ab ("test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate", 2019-12-23) we simply set the t5515 test to always run with protocol v1. If you'd do this:

    diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh
    index 70a9d2d8ab..939c8b2f83 100755
    --- a/t/t5515-fetch-merge-logic.sh
    +++ b/t/t5515-fetch-merge-logic.sh
    @@ -11,6 +11,9 @@ test_description='Merge logic in fetch'
     GIT_TEST_PROTOCOL_VERSION=0
     export GIT_TEST_PROTOCOL_VERSION

    +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
    +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
    +
     . ./test-lib.sh

     build_script () {

Of course that also needs:

index fa347ed3e1..2d700a171b 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -1711,10 +1711,8 @@ test_lazy_prereq SHA1 '
test_lazy_prereq REBASE_P '
test -z "$GIT_TEST_SKIP_REBASE_P"
'
-# Special-purpose prereq for transitioning to a new default branch name:
-# Some tests need more than just a mindless (case-preserving) s/master/main/g -# replacement. The non-trivial adjustments are guarded behind this -# prerequisite, acting kind of as a feature flag -test_lazy_prereq PREPARE_FOR_MAIN_BRANCH '
- test "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" = main
+
+test_lazy_prereq MAIN_BRANCH_IS_MASTER '
+ test -z "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" ||
+ test "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" = "master"
'

Because (but see "later" a few paragraphs later), the logic as it stands on "master" is entirely backwards & broken. I.e. if you don't set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME or set it to "master" we now skip a bunch of tests ... which only work if the value is "master". If you set it to "main" they'll break.

Then instead of ending up with a hardcoding of "main" we'd be able to run the tests with a new custom branch name (even one with whitespace in it). That coverage is plenty to test any branch name hardcoding.

The remaining tests that would still have "master" would then just be dealt with by the same thing we did for the too-protocol-v1-specific tests, i.e.:

    diff --git a/t/t3502-cherry-pick-merge.sh b/t/t3502-cherry-pick-merge.sh
    index 8b635a196d..354f9bd851 100755
    --- a/t/t3502-cherry-pick-merge.sh
    +++ b/t/t3502-cherry-pick-merge.sh
    @@ -8,6 +8,8 @@ test_description='cherry picking and reverting a merge

     '

    +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
    +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
     . ./test-lib.sh

     test_expect_success setup '

Except unlike protocol v1/v2 we're really not gaining anything in coverage by going further, it's not the point of any of these tests to test for the default branch name. It's a *lot* of churn,

"Later": After writing the above I see from 704fed9ea2 ("tests: start moving to a different default main branch name", 2020-10-23) that this state of affairs is intentional. But doesn't discuss why the more usual (because we've done it that way a few times before) v1/v2-esque transition wasn't done instead.

Doing it the other way still seems better. We're now not running our full tests in anticipation for this series landing on "master", and after applying this we're still not running all of them.

Anyway, enough with discussing this detail of the test suite churn. My main objection to this version of it is:

After this series as it stands lands what's a rather big UI change in git isn't discussed *anywhere* in the docs.

I'm not saying we need some similar s/master/main/g in Documentation/ as what's being done here in t/, but I think a bare minimum for a rather big UI change like this is:

1) Let's at least talk about it in some way in git-init(1), i.e. that it used to be "master" before version so-and-so and is now different. With this series applied we still say:

Documentation/git-init.txt:If not specified, fall back to the default name: master.

2) Ditto in the init.defaultBranch and things like that

3) After all this effort at eliminating "master" entirely in the tests we're still shipping a sample hook that expects "master" on "git init", and breaks now that it's "main"

And maybe stuff like:

4) Have "git init" emit some new advice message saying that the default has changed and we've init-ed a new repo with a "main" branch.

Our primary concern should be the vast majority of users who don't follow this topic on Twitter, don't read this mailing list, and are just going to waste 10 minutes of their day because some script they've had working for years using "git init" did something unexpected.

Let's at least aim to make that 5 minutes instead by making the change more discoverable.

#38 lore raw

[RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

Since 704fed9ea2 ("tests: start moving to a different default main branch name", 2020-10-23) we've been needlessly skipping tests if the branch is "master" in preparation for an eventual switch to another name.

As I noted in [1] I don't see why we shouldn't be doing a more graceful approach here where we don't start skipping unrelated tests just because some s/master/main/g changes are in flight.

Furthermore the seeming goal of eliminating the string "master" from anywhere in git's sources results in needless patch churn, and has nothing to do with the goal of changing the branch name in the UX.

This patch demonstrates that things could be much simpler if we don't set ourselves that requirement. Now we:

* Can set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=<some-name>, but this no longer overrides config, so it behaves like other GIT_TEST_* variables.

* Have a test-tool helper that gives us refs.c's idea of the main branch name to share the logic between the tests and the main C code.

* A lot of tests (but a small minority of the total) have master "master" hardcoded in some way. We now inventory them in tests-that-need-master.txt, we can still remove the names from that file and manually change the code later, but this accomplishes a clean test run with a relatively easy-to-review diff.

We ignore GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=<name> when it comes to these files, unless GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME_HARDER=true is set.

* The changes to t5515-fetch-merge-logic.sh and t5560-http-backend-noserver.sh show how much easier it is to just punt on certain tests. In these tests that heavily rely on the "master" name (not inherently, it's just hardcoded in a lot of places) we just give up and keep using "master".

1. https://lore.kernel.org/git/[email protected]/

---

I need to walk away from the computer now, but this is an RFC of what I was commenting on upthread.

 Makefile                            |   1 +
 config.c                            |  10 +
 config.h                            |   1 +
 refs.c                              |   7 +-
 t/helper/test-default-branch-name.c |  16 ++
 t/helper/test-tool.c                |   1 +
 t/helper/test-tool.h                |   1 +
 t/t0001-init.sh                     |   2 +-
 t/t5515-fetch-merge-logic.sh        |   3 +
 t/t5560-http-backend-noserver.sh    |   4 +
 t/test-lib.sh                       |  27 ++-
 t/tests-that-need-master.txt        | 343 ++++++++++++++++++++++++++++
 12 files changed, 403 insertions(+), 13 deletions(-)
 create mode 100644 t/helper/test-default-branch-name.c
 create mode 100644 t/tests-that-need-master.txt
Makefile +1 -0
index 790a883932..fb94c836e2 100644
@@ -696,6 +696,7 @@ TEST_BUILTINS_OBJS += test-chmtime.o
 TEST_BUILTINS_OBJS += test-config.o
 TEST_BUILTINS_OBJS += test-ctype.o
 TEST_BUILTINS_OBJS += test-date.o
+TEST_BUILTINS_OBJS += test-default-branch-name.o
 TEST_BUILTINS_OBJS += test-delta.o
 TEST_BUILTINS_OBJS += test-dir-iterator.o
 TEST_BUILTINS_OBJS += test-drop-caches.o
config.c +10 -0
index 2bdff4457b..0c12864b79 100644
@@ -1706,6 +1706,16 @@ unsigned long git_env_ulong(const char *k, unsigned long val)
 	return val;
 }
 
+/*
+ * Parse environment variable 'k' as a char *; if missing, use the
+ * default value 'def'.
+ */
+const char* git_env_str(const char *k, const char *def)
+{
+	const char *v = getenv(k);
+	return v && strlen(v) ? v : def;
+}
+
 int git_config_system(void)
 {
 	return !git_env_bool("GIT_CONFIG_NOSYSTEM", 0);
config.h +1 -0
index 91cdfbfb41..36a7284f8a 100644
@@ -298,6 +298,7 @@ int git_config_copy_section_in_file(const char *, const char *, const char *);
 const char *git_etc_gitconfig(void);
 int git_env_bool(const char *, int);
 unsigned long git_env_ulong(const char *, unsigned long);
+const char* git_env_str(const char *, const char *);
 int git_config_system(void);
 int config_error_nonbool(const char *);
 #if defined(__GNUC__)
refs.c +2 -5
index 392f0bbf68..ca8875e945 100644
@@ -567,15 +567,12 @@ char *repo_default_branch_name(struct repository *r)
 	const char *config_key = "init.defaultbranch";
 	const char *config_display_key = "init.defaultBranch";
 	char *ret = NULL, *full_ref;
-	const char *env = getenv("GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME");
 
-	if (env && *env)
-		ret = xstrdup(env);
-	else if (repo_config_get_string(r, config_key, &ret) < 0)
+	if (repo_config_get_string(r, config_key, &ret) < 0)
 		die(_("could not retrieve `%s`"), config_display_key);
 
 	if (!ret)
-		ret = xstrdup("master");
+		ret = xstrdup(git_env_str("GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME", "master"));
 
 	full_ref = xstrfmt("refs/heads/%s", ret);
 	if (check_refname_format(full_ref, 0))
t/helper/test-default-branch-name.c new file +16 -0
new file mode 100644
index 0000000000..1a0c8502ee
@@ -0,0 +1,16 @@
+#include "test-tool.h"
+#include "git-compat-util.h"
+#include "refs.h"
+
+/*
+ * usage:
+ * tool-test default-branch-name
+ */
+int cmd__default_branch_name(int argc, const char **argv)
+{
+	const char *name = git_default_branch_name();
+
+	puts(name);
+
+	return 0;
+}
t/helper/test-tool.c +1 -0
index a0d3966b29..ad4bd7274c 100644
@@ -21,6 +21,7 @@ static struct test_cmd cmds[] = {
 	{ "ctype", cmd__ctype },
 	{ "date", cmd__date },
 	{ "delta", cmd__delta },
+	{ "default-branch-name", cmd__default_branch_name },
 	{ "dir-iterator", cmd__dir_iterator },
 	{ "drop-caches", cmd__drop_caches },
 	{ "dump-cache-tree", cmd__dump_cache_tree },
t/helper/test-tool.h +1 -0
index 07034d3f38..e0dda6bfd8 100644
@@ -10,6 +10,7 @@ int cmd__chmtime(int argc, const char **argv);
 int cmd__config(int argc, const char **argv);
 int cmd__ctype(int argc, const char **argv);
 int cmd__date(int argc, const char **argv);
+int cmd__default_branch_name(int argc, const char **argv);
 int cmd__delta(int argc, const char **argv);
 int cmd__dir_iterator(int argc, const char **argv);
 int cmd__drop_caches(int argc, const char **argv);
t/t0001-init.sh +1 -1
index 69a320489f..68adb9a832 100755
@@ -562,7 +562,7 @@ test_expect_success 'overridden default main branch name (env)' '
 	test_config_global init.defaultBranch nmb &&
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=env git init main-branch-env &&
 	git -C main-branch-env symbolic-ref HEAD >actual &&
-	grep env actual
+	grep nmb actual
 '
 
 test_expect_success 'invalid default branch name' '
t/t5515-fetch-merge-logic.sh +3 -0
index 70a9d2d8ab..939c8b2f83 100755
@@ -11,6 +11,9 @@ test_description='Merge logic in fetch'
 GIT_TEST_PROTOCOL_VERSION=0
 export GIT_TEST_PROTOCOL_VERSION
 
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
 . ./test-lib.sh
 
 build_script () {
t/t5560-http-backend-noserver.sh +4 -0
index 9fafcf1945..27b31745ad 100755
@@ -1,6 +1,10 @@
 #!/bin/sh
 
 test_description='test git-http-backend-noserver'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
 . ./test-lib.sh
 
 HTTPD_DOCUMENT_ROOT_PATH="$TRASH_DIRECTORY"
t/test-lib.sh +20 -7
index fa347ed3e1..11ea009717 100644
@@ -1382,6 +1382,26 @@ HOME="$TRASH_DIRECTORY"
 GNUPGHOME="$HOME/gnupg-home-not-used"
 export HOME GNUPGHOME
 
+# Check if we're doing tests with the main branch != master, and if
+# we'd like to override that for known-broken tests.
+GIT_TEST_MAIN=$(test-tool default-branch-name)
+if test "$GIT_TEST_MAIN" = "master"
+then
+	test_set_prereq MAIN_BRANCH_IS_MASTER
+else
+	if test -z "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME_HARDER" &&
+	   grep -q $TEST_NAME "$TEST_DIRECTORY/tests-that-need-master.txt"
+	then
+		echo overriding
+		GIT_TEST_MAIN=master
+		GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
+		test_set_prereq MAIN_BRANCH_IS_MASTER
+	fi
+fi
+export GIT_TEST_MAIN
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+# Initialize the repository after we know the main branch name.
 if test -z "$TEST_NO_CREATE_REPO"
 then
 	test_create_repo "$TRASH_DIRECTORY"
@@ -1711,10 +1731,3 @@ test_lazy_prereq SHA1 '
 test_lazy_prereq REBASE_P '
 	test -z "$GIT_TEST_SKIP_REBASE_P"
 '
-# Special-purpose prereq for transitioning to a new default branch name:
-# Some tests need more than just a mindless (case-preserving) s/master/main/g
-# replacement. The non-trivial adjustments are guarded behind this
-# prerequisite, acting kind of as a feature flag
-test_lazy_prereq PREPARE_FOR_MAIN_BRANCH '
-	test "$GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME" = main
-'
t/tests-that-need-master.txt new file +343 -0

343 lines not on this page · raw message

Signature · 1 line
2.29.2.222.g5d2a92d10f8
#54 lore raw
In reply to Ævar Arnfjörð Bjarmason
Quoted 8 lines · Ævar Arnfjörð Bjarmason

On Thu, Nov 12 2020, Johannes Schindelin via GitGitGadget wrote:

After this series as it stands lands what's a rather big UI change in git isn't discussed *anywhere* in the docs.

I'm not saying we need some similar s/master/main/g in Documentation/ as what's being done here in t/, but I think a bare minimum for a rather big UI change like this is:

Why not?

Isn't this change being championed on behalf of users who find the word offensive?

Why would it be offensive to see the word on the commands you type on the command line, but not offensive if the documentation tells you to type those commands? This does not compute.

And worse; for the rest of the users that don't find the word offensive (99.9% of them?), the documentation is left in an inconsistent state, where some commands would not work as they are stated.

If a word is so offensive it has to be erased from the Git lexicon, then it has to be erased *everywhere*, or at least everywhere a user might look.

Cheers.

Signature · 1 line
Felipe Contreras
#39 lore raw

Re: [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

In reply to Ævar Arnfjörð Bjarmason
Quoted 9 lines · Ævar Arnfjörð Bjarmason

* A lot of tests (but a small minority of the total) have master "master" hardcoded in some way. We now inventory them in tests-that-need-master.txt, we can still remove the names from that file and manually change the code later, but this accomplishes a clean test run with a relatively easy-to-review diff.

We ignore GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=<name> when it comes to these files, unless GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME_HARDER=true is set.

I'm confused how this is better. We could just be setting GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME at the top of those files, couldn't we? (Likewise, I think annotating individual scripts is more decentralized than a magic pattern in test-lib.sh, though it amounts to the same thing).

And if I understand the current state of Dscho's patches, we don't _have_ to convert any tests right now. We could just annotate those scripts which are not yet converted to have them use the old name.

But I don't think we want to live in that state indefinitely. It's slightly annoying to have inconsistent naming within the tests. I'd be happy to switch individual tests at a leisurely pace over the next couple of months or whatever. But since Dscho has bothered to write all of the patches now, why not use them?

I'm much more concerned about the lack of documentation changes associated with the final patch. We don't necessarily need to eradicate every mention of "master" from the documentation, but I think we do need to make sure that examples and instructions are consistent with how Git will actually behave. And that does need to happen at the same time as the user-visible flip of the default.

I'm on the fence whether there should be a deprecation period or major version bump for the final patch, but making the tests flexible enough to handle the before and after state seems like it can be done uncoupled from the actual default-flip.

-Peff

#40 lore raw

Re: [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

Hi Peff and Ævar,

Quoted 12 lines · Jeff King
Quoted 9 lines · Ævar Arnfjörð Bjarmason

* A lot of tests (but a small minority of the total) have master "master" hardcoded in some way. We now inventory them in tests-that-need-master.txt, we can still remove the names from that file and manually change the code later, but this accomplishes a clean test run with a relatively easy-to-review diff.

We ignore GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=<name> when it comes to these files, unless GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME_HARDER=true is set.

Quoted 5 lines

I'm confused how this is better. We could just be setting GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME at the top of those files, couldn't we? (Likewise, I think annotating individual scripts is more decentralized than a magic pattern in test-lib.sh, though it amounts to the same thing).

I considered this alternative very briefly, and rejected it immediately because it would have implied a drawn-out limbo where the test suite will be inconsistent. That's not what I want.

Quoted 3 lines

And if I understand the current state of Dscho's patches, we don't _have_ to convert any tests right now. We could just annotate those scripts which are not yet converted to have them use the old name.

And that's what I did in some cases, see e.g. 5d5f4ea30de (t5411: finish preparing for main being the default branch name, 2020-10-31).

It's just quite a ton of work to do this for all the affected test scripts, and I wanted to automate as much as possible of that process so that it'll be easier to cope with all the other topics that are in flight.

Therefore, I opted to "annotate the scripts" via a case in test-lib.sh. It should be quite a bit easier to understand, too, for the occasional reader, as it shows you the complete range of scripts that have been handled so far.

Quoted 5 lines

But I don't think we want to live in that state indefinitely. It's slightly annoying to have inconsistent naming within the tests. I'd be happy to switch individual tests at a leisurely pace over the next couple of months or whatever. But since Dscho has bothered to write all of the patches now, why not use them?

Yep, I am a bit puzzled why we need to consider other approaches. I would have thought that the more pressing issue is to verify that I

1) caught all the necessary conversions,

2) did not miss any non-trivial adjustments (such as naster and aligned comments).

At the same time, I am quite thankful for all the help Ævar provided; mentioning that I missed naster in t1400 was definitely super helpful.

Quoted 6 lines

I'm much more concerned about the lack of documentation changes associated with the final patch. We don't necessarily need to eradicate every mention of "master" from the documentation, but I think we do need to make sure that examples and instructions are consistent with how Git will actually behave. And that does need to happen at the same time as the user-visible flip of the default.

I am sorry. This is totally my fault. I should have described this much better in the cover letter. This patch series deliberately omits all the documentation changes.

I _did_ prepare them, they are pretty much ready-to-go, as part of the inclusive-naming branch I track in
https://github.com/gitgitgadget/git/pull/655 (I use the branch name use-main-as-default-branch-name-docs in the inclusive-naming branch thicket to track the documentation changes).

The decision to separate them out into their own patch series was made consciously, to avoid having one big, honking, totally unreviewably large patch series.

Therefore, just like I fed the preparatory patch series in a slow cadence, I planned on feeding the -docs patch series once the dust settles on this patch series (i.e. once it hits next).

Quoted 4 lines

I'm on the fence whether there should be a deprecation period or major version bump for the final patch, but making the tests flexible enough to handle the before and after state seems like it can be done uncoupled from the actual default-flip.

Hmm. On that matter, I wonder what the big fuss is all about. It's not like Git is forcing anybody to change their default branch. That's not at all what we're doing. To the contrary: _after_ many projects chose to change their default branch names, and _after_ GitHub started to follow that trend, Git added support for init.defaultBranch to accommodate that use case better. So in a sense, we're actually pretty late changing the fall-back of init.defaultBranch, at least from the perspective outside of the Git project.

There have been plenty of articles about this in the meantime, too, and I could imagine that most developers are at least aware that the shift away from master is happening, in many quite visible projects.

So to me, this whole discussion about whether this should bump the major version of Git seems a bit overblown. It's not like the median developer is creating new repositories on a regular basis, and if they do, chances are that they go with whatever branch name happens to be the initial one.

What is much more common is that developers clone existing projects. And guess what, many of those projects already use a different default branch name. And developers seem to accept that and just go on with their lives.

If it was up to me, I would reserve a major version increment to much bigger changes.

Ciao,
Dscho

#41 lore raw

Re: [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

Hi Peff,

Quoted 7 lines · Johannes Schindelin
Quoted 4 lines · Jeff King

I'm on the fence whether there should be a deprecation period or major version bump for the final patch, but making the tests flexible enough to handle the before and after state seems like it can be done uncoupled from the actual default-flip.

Quoted 7 lines

[...] It's not like the median developer is creating new repositories on a regular basis, and if they do, chances are that they go with whatever branch name happens to be the initial one.

What is much more common is that developers clone existing projects. And guess what, many of those projects already use a different default branch name. And developers seem to accept that and just go on with their lives.

After sending off this mail, I felt a bit bad about not backing this up with data.

Whatever telemetry I would be able to pull would not be representative, and I would not be at liberty to share it anyway. So I asked Alex Mullans of GitHub (who is in charge of the default branch name switch to main there) whether he has any data I could share publicly and he said: "Across GitHub, 1/4 of daily pushes (and growing) go to main."

Seeing as the branch name to be used in newly-created repositories on GitHub changed only very recently (October 1st, i.e. some 6 weeks ago), I highly suspect that this number means that _a lot_ of existing projects have changed their primary branch name to main, and seem to be quite happy with it.

All this is to say that I consider it unnecessary to have a long deprecation period or major version bump for this patch series, based on available public data. The name main is already in wide-spread use (and growing) as primary branch name of Git projects.

Ciao,
Dscho

#42 lore raw

Re: [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

In reply to Johannes Schindelin
Quoted 51 lines · Johannes Schindelin

Hi Peff and Ævar,

Quoted 12 lines · Jeff King
Quoted 9 lines · Ævar Arnfjörð Bjarmason

* A lot of tests (but a small minority of the total) have master "master" hardcoded in some way. We now inventory them in tests-that-need-master.txt, we can still remove the names from that file and manually change the code later, but this accomplishes a clean test run with a relatively easy-to-review diff.

We ignore GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=<name> when it comes to these files, unless GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME_HARDER=true is set.

Quoted 5 lines

I'm confused how this is better. We could just be setting GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME at the top of those files, couldn't we? (Likewise, I think annotating individual scripts is more decentralized than a magic pattern in test-lib.sh, though it amounts to the same thing).

I considered this alternative very briefly, and rejected it immediately because it would have implied a drawn-out limbo where the test suite will be inconsistent. That's not what I want.

Quoted 3 lines

And if I understand the current state of Dscho's patches, we don't _have_ to convert any tests right now. We could just annotate those scripts which are not yet converted to have them use the old name.

And that's what I did in some cases, see e.g. 5d5f4ea30de (t5411: finish preparing for main being the default branch name, 2020-10-31).

It's just quite a ton of work to do this for all the affected test scripts, and I wanted to automate as much as possible of that process so that it'll be easier to cope with all the other topics that are in flight.

Therefore, I opted to "annotate the scripts" via a case in test-lib.sh. It should be quite a bit easier to understand, too, for the occasional reader, as it shows you the complete range of scripts that have been handled so far.

Quoted 5 lines

But I don't think we want to live in that state indefinitely. It's slightly annoying to have inconsistent naming within the tests. I'd be happy to switch individual tests at a leisurely pace over the next couple of months or whatever. But since Dscho has bothered to write all of the patches now, why not use them?

Yep, I am a bit puzzled why we need to consider other approaches. I would have thought that the more pressing issue is to verify that I

Quoted 7 lines

1) caught all the necessary conversions,

2) did not miss any non-trivial adjustments (such as naster and aligned comments).

At the same time, I am quite thankful for all the help Ævar provided; mentioning that I missed naster in t1400 was definitely super helpful.

Not being up-to-date on this whole s/master/main/g discussion, is the context here that we've essentially pre-approved these patches & doc for integration into the next release? If so I really don't mind doing it this way.

I started poking at this because I noticed that on git.git's master branch tests were being skipped due to PREPARE_FOR_MAIN_BRANCH, so it's in some in-between state between patch serieses.

We're now in week 4/9 of a release cycle for 2.30 (or 3.00 or whatever). I hope the one thing people for & against this master/main change can agree on is that it would be bad to ship a git with an incomplete migration to "main", e.g. the 28/28 patch here which changes it but without any doc updates.

I may be reading this wrong, but it seems pr-762/dscho/use-main-as-default-branch-name-v1...remotes/dscho/inclusive-naming (which I'm assuming is what's left) is another ~30k line diff on top of this ~25k one.

So yes I'm very late to the discussion, sorry about that. I'm just chiming in to say that if we're doing this as part of our regular patch review front-loading these massive search/replace changes seems to be too much of a change for one cycle.

But if Junio's going to chime in to say he's applying it all I don't care & don't have any concern about it.

Quoted 9 lines
Quoted 6 lines

I'm much more concerned about the lack of documentation changes associated with the final patch. We don't necessarily need to eradicate every mention of "master" from the documentation, but I think we do need to make sure that examples and instructions are consistent with how Git will actually behave. And that does need to happen at the same time as the user-visible flip of the default.

I am sorry. This is totally my fault. I should have described this much better in the cover letter. This patch series deliberately omits all the

Ditto in my hastily-written RFC commit message. A better summary is:

* Yours: All tests depend on master changed to all tests depend on main
* Mine (well, partway there): You can set $ANY_NAME for the branch, but we blacklist some as being hardcoded on <name> (which I just left at master).

This means we can test e.g. non-ASCII default branch names. It seems better to me if we're going to s/master/something/g & review it to have that something be \$GIT_TEST_MAIN (or another variable). Then we can mark that test as "accepts any default branch name" and move on.

* Yours: Requires not running some tests while we wait for this to land
* Mine: Run all tests & mark them as we go along for master||$NEWNAME. Similar to the test protocol v2 refactoring

But yeah e.g. the t/tests-that-need-master.txt I added in my RFC is better marked in the test itself, I should have stolen your 'case "$TEST_NUMBER"' way of doing it.

In my defense I honestly managed to miss it in skimming the ginormous diff, which I think makes part of my argument here :)

Quoted 6 lines

I _did_ prepare them, they are pretty much ready-to-go, as part of the inclusive-naming branch I track in
https://github.com/gitgitgadget/git/pull/655 (I use the branch name use-main-as-default-branch-name-docs in the inclusive-naming branch thicket to track the documentation changes).

Quoted 7 lines

The decision to separate them out into their own patch series was made consciously, to avoid having one big, honking, totally unreviewably large patch series.

Therefore, just like I fed the preparatory patch series in a slow cadence, I planned on feeding the -docs patch series once the dust settles on this patch series (i.e. once it hits next).

On the topic of deprecation etc.:

Quoted 23 lines
Quoted 4 lines

I'm on the fence whether there should be a deprecation period or major version bump for the final patch, but making the tests flexible enough to handle the before and after state seems like it can be done uncoupled from the actual default-flip.

Hmm. On that matter, I wonder what the big fuss is all about. It's not like Git is forcing anybody to change their default branch. That's not at all what we're doing. To the contrary: _after_ many projects chose to change their default branch names, and _after_ GitHub started to follow that trend, Git added support for init.defaultBranch to accommodate that use case better. So in a sense, we're actually pretty late changing the fall-back of init.defaultBranch, at least from the perspective outside of the Git project.

There have been plenty of articles about this in the meantime, too, and I could imagine that most developers are at least aware that the shift away from master is happening, in many quite visible projects.

So to me, this whole discussion about whether this should bump the major version of Git seems a bit overblown. It's not like the median developer is creating new repositories on a regular basis, and if they do, chances are that they go with whatever branch name happens to be the initial one.

Quoted 7 lines

What is much more common is that developers clone existing projects. And guess what, many of those projects already use a different default branch name. And developers seem to accept that and just go on with their lives.

If it was up to me, I would reserve a major version increment to much bigger changes.

[I'm continuing quoting you here from your downthread <[email protected]>]

Quoted 12 lines

Whatever telemetry I would be able to pull would not be representative, and I would not be at liberty to share it anyway. So I asked Alex Mullans of GitHub (who is in charge of the default branch name switch to main there) whether he has any data I could share publicly and he said: "Across GitHub, 1/4 of daily pushes (and growing) go to main."

Seeing as the branch name to be used in newly-created repositories on GitHub changed only very recently (October 1st, i.e. some 6 weeks ago), I highly suspect that this number means that _a lot_ of existing projects have changed their primary branch name to main, and seem to be quite happy with it.

Quoted 4 lines

All this is to say that I consider it unnecessary to have a long deprecation period or major version bump for this patch series, based on available public data. The name main is already in wide-spread use (and growing) as primary branch name of Git projects.

All of that's true, but I really don't see how it's relevant to the change we're discussing making to refs.c in git.git, which from my generous reading of some of the threads in objection to this is the main point of contention.

(I'm generously not engaging with some of the more howler-monkey esque replies we've had on-list from people who seemed to have no idea what was actually being proposed in git.git)

*That* change is not whether we approve of people using "main", or hosting sites like GitHub etc. making it the default.

I think it's fair to say that even in some alternate universe where the particular reasons we're switching away from "master" didn't exist and e.g. GitHub et al had just decided on this out of the blue based on an aesthetic preference we'd just say "uh, sure, whatever, you configure it how you want".

Rather, we're talking about what happens when you run "git init".

Most people who are using or creating git repositories are nowadays never going to be impacted by what "git init" does. So I think the data you're citing here doesn't support your argument at all, it does the opposite.

The people using these repositories with "main" on GitHub did not do so with a patch to "git init". They clicked a button in the UI, or copy/pasted GitHub's "how to create a local repo" which nowadays will manually set the branch to "main" before pushing.

Then who's using "git init" who's going to be impacted by this change? It's everyone else, like probably tens of tens of thousands of one-off cronjobs somewhere creating a daily report of some by "init && commit && git diff master..".

I'm on the fence about what we should do in that case, but I'm leaning towards some deprecation period or at least some other approach than a s/master/main/g change precisely because of the numbers you're citing.

Because they shows how irrelevant the default shipped with git.git is to users who want this s/master/main/g change in repositories they regularly use. So we're really mostly talking about an impact to scripts & some advanced users, both of who have a pretty good argument for "init"'s default being what's been explicitly documented for ages in its manpage.

Even if we want to just change it I think it's uncharitable to those people not to at least consider throwing them some bone. E.g. "init" could use the old default when it's not connected to a terminal, we could show an advice notice and sleep(5) saying we're using a new default etc. etc.

#53 lore raw

Re: [RFC/PATCH] tests: support testing with an arbitrary default branch (sort of)

In reply to Johannes Schindelin
Quoted 9 lines · Johannes Schindelin
Quoted 4 lines · Jeff King

I'm on the fence whether there should be a deprecation period or major version bump for the final patch, but making the tests flexible enough to handle the before and after state seems like it can be done uncoupled from the actual default-flip.

Hmm. On that matter, I wonder what the big fuss is all about. It's not like Git is forcing anybody to change their default branch.

Except you are, and you will be doing it without the user consent, and without warning. This is the opposite of what any software project that cares about its users should do.

The consequences are predictable.

Exactly the same argument was used in 2008, and it was wrong for exactly the same reasons.

Yes, people could add the exec-path to their PATH, so "nobody was being forced" ultimately, but that's missing the point entirely, because that happened *after* they were forced initially, and being caught completely off guard.

Quoted 3 lines

There have been plenty of articles about this in the meantime, too, and I could imagine that most developers are at least aware that the shift away from master is happening, in many quite visible projects.

I have used Git since 2005, contributed since 2009, follow the git subreddit, and I was not aware of the change, and presumably neither was Ævar.

What you imagine most developers know is irrelevant, what is relevant is what they actually know.

This is the bias known as the curse of knowledge: since you have a lot of specific knowledge you fail to see how other people could not see the same thing you are seeing, but they don't, and the reason is that they don't have the same knowledge as you.

But just because you can't see it happen, doesn't mean it can't.

It did in 2008, and people back then used the same argument you are using now.

Developers back then could not imagine how it was possible that users were not aware of the upcoming change that had been cooking for years, but alas they did not.

Do not assume what your users know. Deprecation periods exist for a reason, and so do warnings.

Signature · 1 line
Felipe Contreras
#55 lore raw
In reply to Johannes Schindelin via GitGitGadget

"Johannes Schindelin via GitGitGadget" <[email protected]>

Quoted 3 lines · writes:

This is the big one. This changes the default of init.defaultBranch to main, reflecting what many open source projects already did (which was followed by GitHub, Azure Repos and others).

I'll keep this brief as I'm still offline/vacation til next week.

As other people already said, I'd prefer to see

- all tests updated to work, without losing any coverage, regardless of the default for the init.defaultbranch is.

Some test scripts may require setting init.defaultBranch='master' at the top in the 'setup' part (I've shown how in my response to t4013 patchset) if the body of the test relies too heavily on the primary branch to be 'master'. On the other hand, some test scripts may require setting init.defaultBranch='main' at the top, if they have been converted to work _only_ with 'main'.

Both of these are unfortunate, but it is much better than losing test coverage during the test update effort.

Some test scripts may not need any "this test would only work with 'master|main', so we are forcing". After your test update series so far, hopefully many may already be ready to be force to 'main' even when the Git binary may still use 'master' as the fallback default for init.defaultBranch.

- a well thought-out transition plan (including user education and publicity), with the final "flip of the fallback default".

and I'd strongly prefer that these two to be done separately. Since we cannot anticipate how long the latter would take with unknown amount of distraction, I'd prefer 100% of our tests keep working while the fallback default for init.defaultBranch is 'master', and they still work on the flag day when the default is changed to 'main' (or 'primary' for that matter---after all, tests that care too deeply what the primary branch name is, and have been updated to eradicate 'master' from them, would be forcing 'main', so the hardcoded fallback default in our binary should not matter).

Thanks.

#56 lore raw
Quoted 4 lines · Junio C Hamano

Some test scripts may require setting init.defaultBranch='master' at the top in the 'setup' part (I've shown how in my response to t4013 patchset) if the body of the test relies too heavily on the primary branch to be 'master'.

Ah, I realized we have much better mechanism already in the form of GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME environment.

So, my three wishes in this message now become

- lose PREPARE_FOR_MAIN_BRANCH prerequisite as quickly as possible by doing the following two.

- Use that mechanism to force 'main' in test scripts that now only can work with 'main', even before we change the fallback default from master to main in the production code, so that we won't lose test coverage.

- The same for test scripts that are not converted yet to force use of 'master', so that we could change the fallback default from master to main in the production code even before converting these other scripts, so that we won't lose test coverage.

Thanks.

#34 lore raw

Re: [PATCH 28/28] Change the default branch name to `main`

In reply to Johannes Schindelin
Quoted 13 lines · Johannes Schindelin

Hi Ævar,

Quoted 9 lines · Ævar Arnfjörð Bjarmason
Quoted 5 lines · Don Goodman-Wilson via GitGitGadget

The current default name for the initial branch is a loaded term, and many Open Source projects renamed their principal branches already. A common choice appears to be main.

Let's follow their lead and change the default of init.defaultBranch.

Quoted 8 lines
Quoted 2 lines

I think it makes sense to split this change off from a 28-series test cleanup series.

It is not a test cleanup. It is a series of 27 patches preparing the test suite for the change made in the 28th patch.

I don't think that it is a good idea to split off that 28th patch from the patches whose entire purpose is to prepare for that 28th patch.

Well, I personally think that the "purpose" of the first 27 patches must be updated if that is the case.

The test should NOT be prepared only to work in the post "switch from master to main" world.

Instead, what we want to see is that the test would work whether the fallback default value for init.defaultBranch is 'master' (i.e. old world) or 'main (i.e. a possible new world). Perhaps by using the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME mechanism for tests that relies on a particular value to be the fallback default. So in the sense, the goal the first 26 patches support is the 27th one, which is the most important one in the series from _my_ point of view. We get ourselves prepared so that 28th one can happen at any time.

That way, as long as the first 27 patches land, we will keep the same test coverage as we've always had, regardless of the timing we actually ship the 28th one to the production environment.

Quoted 8 lines

Personally, I would have used something like

		main=$(git symbolic-ref --short HEAD) &&
		[...]
		git checkout $main

instead of what you suggested. That's a topic for another patch (series), though.

Yeah, I would have used $primary or some word that is neither these m* names, but I think that is a good alternative, when workable, to the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME mechanism. When the golden master compared with actual output hardcodes the expected branch names, however, the approach becomes awkward, though.

Thanks.

#17 lore raw

Re: [PATCH 14/28] t55[23]*: adjust the references to the default branch name "main"

In reply to Ævar Arnfjörð Bjarmason
Quoted 1 line · Ævar Arnfjörð Bjarmason

Is there some meaning to the name "nain" and "naster" that I'm missing?

Not for "naster", which came from me who just chose "any single letter" followed by "aster" to match 'master', and there is no other reason. I think Dscho just followed suit.

Quoted 43 lines

If not can we just call this "topic" or something while we're at it? I.e. this on top (just s/nain/topic/g):

t/t5533-push-cas.sh +6 -6
index 9fcec604c3..4e33ec1fb9 100755
@@ -201,12 +201,12 @@ test_expect_success 'cover everything with default force-with-lease (protected)'
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	git ls-remote src refs/heads/\* >expect &&
 	(
 		cd dst &&
-		test_must_fail git push --force-with-lease origin main main:nain
+		test_must_fail git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote src refs/heads/\* >actual &&
 	test_cmp expect actual
@@ -216,16 +216,16 @@ test_expect_success 'cover everything with default force-with-lease (allowed)' '
 	setup_srcdst_basic &&
 	(
 		cd src &&
-		git branch nain main^
+		git branch topic main^
 	) &&
 	(
 		cd dst &&
 		git fetch &&
-		git push --force-with-lease origin main main:nain
+		git push --force-with-lease origin main main:topic
 	) &&
 	git ls-remote dst refs/heads/main |
-	sed -e "s/main/nain/" >expect &&
-	git ls-remote src refs/heads/nain >actual &&
+	sed -e "s/main/topic/" >expect &&
+	git ls-remote src refs/heads/topic >actual &&
 	test_cmp expect actual
 '
 
#57 lore raw
In reply to Junio C Hamano

Hi Junio,

Quoted 7 lines · Junio C Hamano
Quoted 4 lines · Junio C Hamano

Some test scripts may require setting init.defaultBranch='master' at the top in the 'setup' part (I've shown how in my response to t4013 patchset) if the body of the test relies too heavily on the primary branch to be 'master'.

Quoted 6 lines

Ah, I realized we have much better mechanism already in the form of GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME environment.

So, my three wishes in this message now become

- lose PREPARE_FOR_MAIN_BRANCH prerequisite as quickly as possible

Okay, we're on the same page here.

Quoted 1 line

by doing the following two.

A couple of test cases already have the PREPARE_FOR_MAIN_BRANCH prereq (in preparation for transitioning the test suite, which is what I will settle for in v2 of this patch series). Most notably, t5526 and t9902, which I had to exclude to avoid clashing with branches that are currently in flight.

So my goal is to transition the test suite as quickly as possible, by first converting the majority in v2 of this patch series, and then handling the rest of the test scripts individually, on top of the in-flight topics.

Quoted 4 lines

- Use that mechanism to force 'main' in test scripts that now only can work with 'main', even before we change the fallback default from master to main in the production code, so that we won't lose test coverage.

That's precisely what I do, incrementally, by adjusting that case statement in t/test-lib.sh whenever a range of test scripts has been transitioned. In patch 2/28, it looks like this:

	case "$TEST_NUMBER" in
	[01]*)
	       GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
	       export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
	       ;;
	esac

By patch 26/28, it looks like this:

	case "$TEST_NUMBER" in
	3404|4013|5310|5526|6300|7064|7817|9902)
		# Avoid conflicts with patch series that are cooking at the same
		# time
		# as the patch series changing the default of
		# `init.defaultBranch`.
		GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
		export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
		;;
	*)
		GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
		export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
		;;
	esac
Quoted 4 lines

- The same for test scripts that are not converted yet to force use of 'master', so that we could change the fallback default from master to main in the production code even before converting these other scripts, so that we won't lose test coverage.

Okay, I could have done it that way by starting with

	case "$TEST_NUMBER" in
	[01]*)
		GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
		export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
		;;
	*)
		GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
		export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
		;;
	esac

But that would result in a funny-looking intermediate state with a master arm, then main, then again master.

Besides, it would be more complicated because t/t5411-proc-receive-hook.sh and t/t5515-fetch-merge-logic.sh already ask for main, but by setting it before sourcing test-lib.sh, and therefore we would have to special-case them in that case from the get-go.

Therefore, in the interest of making this patch series _slightly_ easier to review (you still have to look at the _bottom_ of most of those patches to catch the crucial change to t/test-lib.sh), I would like to keep the patch series in the current shape.

Will send v2 in a moment.

Thanks,
Dscho

#60 lore raw

v2 cover tests: use main as default branch name

In reply to Johannes Schindelin via GitGitGadget

This (big) patch series (almost) concludes the transition of Git's test suite to use init.defaultBranch=main that was started in js/default-branch-name-part-4-minus-1, continued in js/default-branch-name-adjust-t5411 and in js/default-branch-name-adjust-t5515. This transition prepares for changing the fall-back value of init.defaultBranch accordingly (which will be done in a different set of patch series, with an appropriate deprecation period), reflecting what many open source projects already did followed by GitHub, Azure Repos and others.

Instead of one huge patch that reflects essentially a search-and-replace in the test suite, this patch series splits the changes up into chunks that are intended to be smaller than 100kB so that they are not rejected by the Git mailing list. Interspersed between those changes are adjustments e.g. in alignment, to make it easier to review (or recreate) the search-and-replace patches.

Note that this branch is based on next, mostly because it would otherwise conflict with en/merge-tests, jk/diff-release-filespec-fix and ds/maintenance-part-3.

To avoid even more conflicts with topics that did not even make it to seen yet, this patch series specifically excludes t3404, t4013, t5310, t5526, t6300, t7064, t7817, t9902: in those test scripts, we will still use master for the time being. Once the topics in question have settled, I will send the appropriate follow-up patches to adjust them to use main instead.

Note that even after this patch series, master is still found in t/, even outside of the tests we excluded specifically to avoid conflicts with other patch series that are currently in flight: t/perf/, the git p4 tests (because git p4 still uses p4/master to refer to the remote main branch), and some comments still refer to this name. I intend to address at least some of those, in patch series separate from the current one.

Changes since v1:

* Dropped the commit changing the default initial branch name for git init.
* Adjusted the patch for t1402 to also replace naster by nain.
* Excluded t5526 from the patches for now, to avoid clashing with pk/subsub-fetch-fix.

Johannes Schindelin (27):
t0060: preemptively adjust alignment
t[01]*: adjust the references to the default branch name "main" t2*: adjust the references to the default branch name "main" t3[0-3]*: adjust the references to the default branch name "main"
t3416: preemptively adjust alignment in a comment
t34*: adjust the references to the default branch name "main" t3[5-9]*: adjust the references to the default branch name "main" t4*: adjust the references to the default branch name "main"
t5323: prepare centered comment for master -> main t5[0-4]*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing master with main t550*: adjust the references to the default branch name "main" t551*: adjust the references to the default branch name "main" t55[23]*: adjust the references to the default branch name "main" t55[4-9]*: adjust the references to the default branch name "main" t5[6-9]*: adjust the references to the default branch name "main" t6[0-3]*: adjust the references to the default branch name "main" t64*: preemptively adjust alignment to prepare for master -> main t6[4-9]*: adjust the references to the default branch name "main" t7[0-4]*: adjust the references to the default branch name "main" t7[5-9]*: adjust the references to the default branch name "main" t8*: adjust the references to the default branch name "main" t9[0-4]*: adjust the references to the default branch name "main" t9[5-7]*: adjust the references to the default branch name "main" tests(git-p4): transition to the default branch name main t99*: adjust the references to the default branch name "main"
tests: drop prereq PREPARE_FOR_MAIN_BRANCH where no longer needed

 t/annotate-tests.sh                           |   8 +-
 t/lib-cvs.sh                                  |   2 +-
 t/t0002-gitfile.sh                            |   6 +-
 t/t0020-crlf.sh                               |   8 +-
 t/t0021-conversion.sh                         |  40 +-
 t/t0027-auto-crlf.sh                          |   4 +-
 t/t0028-working-tree-encoding.sh              |   4 +-
 t/t0041-usage.sh                              |  10 +-
 t/t0050-filesystem.sh                         |   6 +-
 t/t0060-path-utils.sh                         |   4 +-
 t/t0100-previous.sh                           |  18 +-
 t/t1004-read-tree-m-u-wf.sh                   |  40 +-
 t/t1008-read-tree-overlay.sh                  |   2 +-
 t/t1009-read-tree-new-index.sh                |   4 +-
 t/t1011-read-tree-sparse-checkout.sh          |   2 +-
 t/t1021-rerere-in-workdir.sh                  |   2 +-
 t/t1090-sparse-checkout-scope.sh              |  10 +-
 t/t1091-sparse-checkout-builtin.sh            |   2 +-
 t/t1300-config.sh                             |   8 +-
 t/t1301-shared-repo.sh                        |   4 +-
 t/t1305-config-include.sh                     |   2 +-
 t/t1309-early-config.sh                       |   4 +-
 t/t1400-update-ref.sh                         |  72 +--
 t/t1402-check-ref-format.sh                   |  32 +-
 t/t1403-show-ref.sh                           |  18 +-
 t/t1405-main-ref-store.sh                     |  42 +-
 t/t1406-submodule-ref-store.sh                |  30 +-
 t/t1407-worktree-ref-store.sh                 |  32 +-
 t/t1408-packed-refs.sh                        |  12 +-
 t/t1410-reflog.sh                             |  56 +-
 t/t1411-reflog-show.sh                        |   2 +-
 t/t1413-reflog-detach.sh                      |  24 +-
 t/t1414-reflog-walk.sh                        |  12 +-
 t/t1416-ref-transaction-hooks.sh              |  10 +-
 t/t1430-bad-ref-name.sh                       |  52 +-
 t/t1450-fsck.sh                               |   2 +-
 t/t1500-rev-parse.sh                          |   4 +-
 t/t1503-rev-parse-verify.sh                   |  28 +-
 t/t1505-rev-parse-last.sh                     |   8 +-
 t/t1506-rev-parse-diagnosis.sh                |   4 +-
 t/t1507-rev-parse-upstream.sh                 |  40 +-
 t/t1508-at-combinations.sh                    |  10 +-
 t/t1511-rev-parse-caret.sh                    |  26 +-
 t/t1512-rev-parse-disambiguation.sh           |   2 +-
 t/t1513-rev-parse-prefix.sh                   |   4 +-
 t/t1514-rev-parse-push.sh                     |  16 +-
 t/t1700-split-index.sh                        |   2 +-
 t/t2007-checkout-symlink.sh                   |  10 +-
 t/t2009-checkout-statinfo.sh                  |   8 +-
 t/t2010-checkout-ambiguous.sh                 |   4 +-
 t/t2011-checkout-invalid-head.sh              |  16 +-
 t/t2012-checkout-last.sh                      |  48 +-
 t/t2015-checkout-unborn.sh                    |   2 +-
 t/t2017-checkout-orphan.sh                    |  44 +-
 t/t2020-checkout-detach.sh                    |  28 +-
 t/t2022-checkout-paths.sh                     |  22 +-
 t/t2023-checkout-m.sh                         |  10 +-
 t/t2024-checkout-dwim.sh                      |  70 +--
 t/t2027-checkout-track.sh                     |   6 +-
 t/t2030-unresolve-info.sh                     |   6 +-
 t/t2060-switch.sh                             |  30 +-
 t/t2070-restore.sh                            |   4 +-
 t/t2106-update-index-assume-unchanged.sh      |   2 +-
 t/t2400-worktree-add.sh                       |  66 +--
 t/t2401-worktree-prune.sh                     |   2 +-
 t/t2402-worktree-list.sh                      |  20 +-
 t/t2405-worktree-submodule.sh                 |   6 +-
 t/t3040-subprojects-basic.sh                  |   2 +-
 t/t3200-branch.sh                             | 248 ++++-----
 t/t3201-branch-contains.sh                    |  82 +--
 t/t3202-show-branch-octopus.sh                |   2 +-
 t/t3203-branch-output.sh                      |  40 +-
 t/t3204-branch-name-interpretation.sh         |   6 +-
 t/t3205-branch-color.sh                       |   8 +-
 t/t3206-range-diff.sh                         |  40 +-
 t/t3206/history.export                        |   2 +-
 t/t3210-pack-refs.sh                          |   4 +-
 t/t3211-peel-ref.sh                           |   4 +-
 t/t3301-notes.sh                              |   6 +-
 t/t3302-notes-index-expensive.sh              |   2 +-
 t/t3303-notes-subtrees.sh                     |   8 +-
 t/t3304-notes-mixed.sh                        |   8 +-
 t/t3308-notes-merge.sh                        |   2 +-
 t/t3320-notes-merge-worktrees.sh              |   4 +-
 t/t3400-rebase.sh                             |  60 +--
 t/t3402-rebase-merge.sh                       |  44 +-
 t/t3403-rebase-skip.sh                        |   6 +-
 t/t3405-rebase-malformed.sh                   |   8 +-
 t/t3406-rebase-message.sh                     |  24 +-
 t/t3407-rebase-abort.sh                       |  18 +-
 t/t3408-rebase-multi-line.sh                  |   2 +-
 t/t3409-rebase-preserve-merges.sh             |  10 +-
 t/t3412-rebase-root.sh                        |  28 +-
 t/t3413-rebase-hook.sh                        |  42 +-
 t/t3415-rebase-autosquash.sh                  |   2 +-
 t/t3416-rebase-onto-threedots.sh              |  54 +-
 t/t3418-rebase-continue.sh                    |  24 +-
 t/t3419-rebase-patch-id.sh                    |  12 +-
 t/t3420-rebase-autostash.sh                   |   8 +-
 t/t3423-rebase-reword.sh                      |   6 +-
 t/t3427-rebase-subtree.sh                     |  20 +-
 t/t3430-rebase-merges.sh                      |  16 +-
 t/t3431-rebase-fork-point.sh                  |  32 +-
 t/t3432-rebase-fast-forward.sh                |  34 +-
 t/t3434-rebase-i18n.sh                        |   8 +-
 t/t3435-rebase-gpg-sign.sh                    |   4 +-
 t/t3436-rebase-more-options.sh                |   2 +-
 t/t3500-cherry.sh                             |  12 +-
 t/t3501-revert-cherry-pick.sh                 |   4 +-
 t/t3502-cherry-pick-merge.sh                  |   2 +-
 t/t3503-cherry-pick-root.sh                   |  10 +-
 t/t3504-cherry-pick-rerere.sh                 |  24 +-
 t/t3505-cherry-pick-empty.sh                  |  24 +-
 t/t3506-cherry-pick-ff.sh                     |   8 +-
 t/t3507-cherry-pick-conflict.sh               |   2 +-
 t/t3508-cherry-pick-many-commits.sh           |  38 +-
 t/t3509-cherry-pick-merge-df.sh               |   2 +-
 t/t3512-cherry-pick-submodule.sh              |   2 +-
 t/t3600-rm.sh                                 |  10 +-
 t/t3701-add-interactive.sh                    |   4 +-
 t/t3901-i18n-patch.sh                         |  40 +-
 t/t3903-stash.sh                              |  32 +-
 t/t3910-mac-os-precompose.sh                  |   6 +-
 t/t4014-format-patch.sh                       | 176 +++---
 t/t4015-diff-whitespace.sh                    |   2 +-
 t/t4017-diff-retval.sh                        |   2 +-
 t/t4038-diff-combined.sh                      |  14 +-
 t/t4041-diff-submodule-option.sh              |   2 +-
 t/t4048-diff-combined-binary.sh               |  10 +-
 t/t4052-stat-output.sh                        |   4 +-
 t/t4056-diff-order.sh                         |   2 +-
 t/t4057-diff-combined-paths.sh                |  20 +-
 t/t4061-diff-indent.sh                        |  24 +-
 t/t4066-diff-emit-delay.sh                    |   2 +-
 t/t4068-diff-symmetric-merge-base.sh          |  48 +-
 t/t4103-apply-binary.sh                       |  36 +-
 t/t4108-apply-threeway.sh                     |  14 +-
 t/t4121-apply-diffs.sh                        |   2 +-
 t/t4122-apply-symlink-inside.sh               |   6 +-
 t/t4150-am.sh                                 |  26 +-
 t/t4200-rerere.sh                             |  20 +-
 t/t4201-shortlog.sh                           |   2 +-
 t/t4202-log.sh                                | 106 ++--
 t/t4203-mailmap.sh                            |   2 +-
 t/t4204-patch-id.sh                           |  26 +-
 t/t4207-log-decoration-colors.sh              |   6 +-
 t/t4208-log-magic-pathspec.sh                 |   4 +-
 t/t4211/history.export                        |   2 +-
 t/t4214-log-graph-octopus.sh                  |   2 +-
 t/t4216-log-bloom.sh                          |   4 +-
 t/t4253-am-keep-cr-dos.sh                     |  20 +-
 t/t4257-am-interactive.sh                     |   2 +-
 t/t5150-request-pull.sh                       |  34 +-
 t/t5304-prune.sh                              |   2 +-
 t/t5305-include-tag.sh                        |   2 +-
 t/t5312-prune-corruption.sh                   |  16 +-
 t/t5317-pack-objects-filter-objects.sh        |   2 +-
 t/t5322-pack-objects-sparse.sh                |   2 +-
 t/t5323-pack-redundant.sh                     |  66 +--
 t/t5400-send-pack.sh                          |  60 +--
 t/t5401-update-hooks.sh                       |  24 +-
 t/t5402-post-merge-hook.sh                    |   2 +-
 t/t5403-post-checkout-hook.sh                 |   6 +-
 t/t5404-tracking-branches.sh                  |   8 +-
 t/t5405-send-pack-rewind.sh                   |   6 +-
 t/t5407-post-rewrite-hook.sh                  |   2 +-
 t/t5410-receive-pack-alternates.sh            |   4 +-
 t/t5500-fetch-pack.sh                         |  28 +-
 t/t5501-fetch-push-alternates.sh              |   4 +-
 t/t5502-quickfetch.sh                         |   6 +-
 t/t5503-tagfollow.sh                          |  12 +-
 t/t5504-fetch-receive-strict.sh               |  20 +-
 t/t5505-remote.sh                             | 148 +++---
 t/t5506-remote-groups.sh                      |   4 +-
 t/t5509-fetch-push-namespaces.sh              |  30 +-
 t/t5510-fetch.sh                              | 162 +++---
 t/t5511-refspec.sh                            |  12 +-
 t/t5512-ls-remote.sh                          |  26 +-
 t/t5514-fetch-multiple.sh                     |  30 +-
 t/t5516-fetch-push.sh                         | 500 +++++++++---------
 t/t5517-push-mirror.sh                        | 124 ++---
 t/t5518-fetch-exit-status.sh                  |   6 +-
 t/t5519-push-alternates.sh                    |  12 +-
 t/t5520-pull.sh                               |  30 +-
 t/t5521-pull-options.sh                       |  16 +-
 t/t5523-push-upstream.sh                      |  30 +-
 t/t5527-fetch-odd-refs.sh                     |  14 +-
 t/t5528-push-default.sh                       |  98 ++--
 t/t5529-push-errors.sh                        |   2 +-
 t/t5530-upload-pack-error.sh                  |   2 +-
 t/t5531-deep-submodule-push.sh                | 188 +++----
 t/t5533-push-cas.sh                           | 142 ++---
 t/t5534-push-signed.sh                        |   4 +-
 t/t5537-fetch-shallow.sh                      |  30 +-
 t/t5538-push-shallow.sh                       |  22 +-
 t/t5539-fetch-http-shallow.sh                 |  14 +-
 t/t5540-http-push-webdav.sh                   |   8 +-
 t/t5541-http-push-smart.sh                    |  40 +-
 t/t5542-push-http-shallow.sh                  |   8 +-
 t/t5543-atomic-push.sh                        |  80 +--
 t/t5545-push-options.sh                       |  62 +--
 t/t5548-push-porcelain.sh                     |  64 +--
 t/t5550-http-fetch-dumb.sh                    |  20 +-
 t/t5551-http-fetch-smart.sh                   |  20 +-
 t/t5552-skipping-fetch-negotiator.sh          |   2 +-
 t/t5553-set-upstream.sh                       |  82 +--
 t/t5561-http-backend.sh                       |   4 +-
 t/t556x_common                                |   8 +-
 t/t5570-git-daemon.sh                         |  16 +-
 t/t5571-pre-push-hook.sh                      |   4 +-
 t/t5572-pull-submodule.sh                     |   4 +-
 t/t5580-unc-paths.sh                          |   2 +-
 t/t5581-http-curl-verbose.sh                  |   2 +-
 t/t5582-fetch-negative-refspec.sh             |  22 +-
 t/t5601-clone.sh                              |   4 +-
 t/t5604-clone-reference.sh                    |  12 +-
 t/t5605-clone-local.sh                        |  10 +-
 t/t5606-clone-options.sh                      |   8 +-
 t/t5607-clone-bundle.sh                       |  14 +-
 t/t5608-clone-2gb.sh                          |   2 +-
 t/t5609-clone-branch.sh                       |   6 +-
 t/t5610-clone-detached.sh                     |   4 +-
 t/t5611-clone-config.sh                       |  16 +-
 t/t5612-clone-refspec.sh                      |  42 +-
 t/t5614-clone-submodules-shallow.sh           |   2 +-
 t/t5616-partial-clone.sh                      |  50 +-
 t/t5617-clone-submodules-remote.sh            |   6 +-
 t/t5700-protocol-v1.sh                        |  16 +-
 t/t5701-git-serve.sh                          |  16 +-
 t/t5702-protocol-v2.sh                        |  50 +-
 t/t5703-upload-pack-ref-in-want.sh            |  60 +--
 t/t5801-remote-helpers.sh                     |  24 +-
 t/t6000-rev-list-misc.sh                      |   2 +-
 t/t6001-rev-list-graft.sh                     |   2 +-
 t/t6004-rev-list-path-optim.sh                |  14 +-
 t/t6006-rev-list-format.sh                    |  14 +-
 t/t6007-rev-list-cherry-pick-file.sh          |   4 +-
 t/t6008-rev-list-submodule.sh                 |   2 +-
 t/t6009-rev-list-parent.sh                    |   6 +-
 t/t6012-rev-list-simplify.sh                  |   8 +-
 t/t6013-rev-list-reverse-parents.sh           |  10 +-
 t/t6016-rev-list-graph-simplify-history.sh    |   2 +-
 t/t6017-rev-list-stdin.sh                     |   8 +-
 t/t6018-rev-list-glob.sh                      |  50 +-
 t/t6019-rev-list-ancestry-path.sh             |   6 +-
 t/t6030-bisect-porcelain.sh                   |  10 +-
 t/t6040-tracking-info.sh                      |  54 +-
 t/t6050-replace.sh                            |  10 +-
 t/t6101-rev-parse-parents.sh                  |   2 +-
 t/t6110-rev-list-sparse.sh                    |   2 +-
 t/t6111-rev-list-treesame.sh                  |   6 +-
 t/t6112-rev-list-filters-objects.sh           |  14 +-
 t/t6120-describe.sh                           |  20 +-
 t/t6200-fmt-merge-msg.sh                      |  50 +-
 t/t6302-for-each-ref-filter.sh                |  58 +-
 t/t6400-merge-df.sh                           |   6 +-
 t/t6402-merge-rename.sh                       |  46 +-
 t/t6404-recursive-merge.sh                    |   4 +-
 t/t6405-merge-symlinks.sh                     |  14 +-
 t/t6406-merge-attr.sh                         |  24 +-
 t/t6407-merge-binary.sh                       |   6 +-
 t/t6409-merge-subtree.sh                      |  16 +-
 t/t6411-merge-filemode.sh                     |  10 +-
 t/t6412-merge-large-rename.sh                 |   6 +-
 t/t6413-merge-crlf.sh                         |   2 +-
 t/t6414-merge-rename-nocruft.sh               |   2 +-
 t/t6415-merge-dir-to-symlink.sh               |  22 +-
 t/t6416-recursive-corner-cases.sh             |  28 +-
 t/t6417-merge-ours-theirs.sh                  |  28 +-
 t/t6418-merge-text-auto.sh                    |  12 +-
 t/t6419-merge-ignorecase.sh                   |  10 +-
 t/t6422-merge-rename-corner-cases.sh          |  12 +-
 t/t6425-merge-rename-delete.sh                |   2 +-
 t/t6427-diff3-conflict-markers.sh             |  14 +-
 t/t6430-merge-recursive.sh                    |  18 +-
 t/t6432-merge-recursive-space-options.sh      |   6 +-
 t/t6433-merge-toplevel.sh                     |   8 +-
 t/t6434-merge-recursive-rename-options.sh     |   6 +-
 t/t6436-merge-overwrite.sh                    |   2 +-
 t/t6437-submodule-merge.sh                    |  14 +-
 t/t6439-merge-co-error-msgs.sh                |   6 +-
 t/t6501-freshen-objects.sh                    |   2 +-
 t/t7003-filter-branch.sh                      |  40 +-
 t/t7004-tag.sh                                |   8 +-
 t/t7030-verify-tag.sh                         |   2 +-
 t/t7060-wtstatus.sh                           |  26 +-
 t/t7063-status-untracked-cache.sh             |  14 +-
 t/t7102-reset.sh                              |   6 +-
 t/t7113-post-index-change-hook.sh             |   2 +-
 t/t7201-co.sh                                 | 110 ++--
 t/t7400-submodule-basic.sh                    |  20 +-
 t/t7403-submodule-sync.sh                     |  10 +-
 t/t7406-submodule-update.sh                   |  38 +-
 t/t7407-submodule-foreach.sh                  |  24 +-
 t/t7409-submodule-detached-work-tree.sh       |   8 +-
 t/t7417-submodule-path-url.sh                 |   2 +-
 t/t7501-commit-basic-functionality.sh         |   2 +-
 t/t7502-commit-porcelain.sh                   |  12 +-
 ...3-pre-commit-and-pre-merge-commit-hooks.sh |  42 +-
 t/t7504-commit-msg-hook.sh                    |  24 +-
 t/t7505-prepare-commit-msg-hook.sh            |  20 +-
 t/t7508-status.sh                             |  58 +-
 t/t7510-signed-commit.sh                      |   2 +-
 t/t7512-status-help.sh                        |  40 +-
 t/t7517-per-repo-email.sh                     |  12 +-
 t/t7600-merge.sh                              |  44 +-
 t/t7606-merge-custom.sh                       |   2 +-
 t/t7608-merge-messages.sh                     |  36 +-
 t/t7610-mergetool.sh                          | 174 +++---
 t/t7611-merge-abort.sh                        |   4 +-
 t/t7612-merge-verify-signatures.sh            |   2 +-
 t/t7614-merge-signoff.sh                      |  24 +-
 t/t7701-repack-unpack-unreachable.sh          |   2 +-
 t/t7800-difftool.sh                           |  38 +-
 t/t7810-grep.sh                               |  28 +-
 t/t8001-annotate.sh                           |   2 +-
 t/t8003-blame-corner-cases.sh                 |   4 +-
 t/t8004-blame-with-conflicts.sh               |  14 +-
 t/t9001-send-email.sh                         |  28 +-
 t/t9100-git-svn-basic.sh                      |   2 +-
 t/t9145-git-svn-master-branch.sh              |   6 +-
 t/t9151-svn-mergeinfo.sh                      |   2 +-
 t/t9155-git-svn-fetch-deleted-tag.sh          |   2 +-
 t/t9156-git-svn-fetch-deleted-tag-2.sh        |   6 +-
 t/t9163-git-svn-reset-clears-caches.sh        |   2 +-
 t/t9169-git-svn-dcommit-crlf.sh               |   2 +-
 t/t9300-fast-import.sh                        |  82 +--
 t/t9301-fast-import-notes.sh                  |  14 +-
 t/t9302-fast-import-unpack-limit.sh           |  16 +-
 t/t9350-fast-export.sh                        |  86 +--
 t/t9351-fast-export-anonymize.sh              |   4 +-
 t/t9400-git-cvsserver-server.sh               |  32 +-
 t/t9401-git-cvsserver-crlf.sh                 |  16 +-
 t/t9402-git-cvsserver-refs.sh                 |   8 +-
 t/t9500-gitweb-standalone-no-errors.sh        |  20 +-
 t/t9501-gitweb-standalone-http-status.sh      |  14 +-
 t/t9502-gitweb-standalone-parse-output.sh     |  16 +-
 t/t9600-cvsimport.sh                          |   2 +-
 t/t9601-cvsimport-vendor-branch.sh            |  16 +-
 t/t9602-cvsimport-branches-tags.sh            |   4 +-
 t/t9603-cvsimport-patchsets.sh                |   8 +-
 t/t9800-git-p4-basic.sh                       |   2 +-
 t/t9801-git-p4-branch.sh                      |  16 +-
 t/t9806-git-p4-options.sh                     |  18 +-
 t/t9807-git-p4-submit.sh                      |   2 +-
 t/t9811-git-p4-label-import.sh                |   2 +-
 t/t9903-bash-prompt.sh                        | 114 ++--
 t/test-lib.sh                                 |  13 +
 348 files changed, 3879 insertions(+), 3866 deletions(-)

base-commit: aff20da3a209088e7f8f3632077fa11b86453d67
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-762%2Fdscho%2Fuse-main-as-default-branch-name-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-762/dscho/use-main-as-default-branch-name-v2
Pull-Request: https://github.com/gitgitgadget/git/pull/762

Range-diff vs v1:

  1:  0a05d319c0 =  1:  0a05d319c0 t0060: preemptively adjust alignment
  2:  830130fa9f !  2:  b8fa037791 t[01]*: adjust the references to the default branch name "main"
     @@ Commit message
      
                  $ (cd t &&
                     sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
     -                    -e 's/Master/Main/g' -- t[01]*.sh)
     +                    -e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh)
     +
     +    Note that t5533 contains a variation of the name `master` (`naster`)
     +    that we rename here, too.
      
          This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
          for those tests.
      
     +    Helped-by: Ævar Arnfjörð Bjarmason <[email protected]>
          Signed-off-by: Johannes Schindelin <[email protected]>
      
       ## t/t0002-gitfile.sh ##
     @@ t/t1402-check-ref-format.sh: valid_ref !MINGW "$ref" '--refspec-pattern --allow-
      -	test "$refname2" = master'
      +	test "$refname2" = main'
       
     - test_expect_success 'check-ref-format --branch -naster' '
     - 	test_must_fail git check-ref-format --branch -naster >actual &&
     +-test_expect_success 'check-ref-format --branch -naster' '
     +-	test_must_fail git check-ref-format --branch -naster >actual &&
     ++test_expect_success 'check-ref-format --branch -nain' '
     ++	test_must_fail git check-ref-format --branch -nain >actual &&
     + 	test_must_be_empty actual
     + '
     + 
      @@ t/t1402-check-ref-format.sh: test_expect_success 'check-ref-format --branch from subdir' '
       
       	T=$(git write-tree) &&
  3:  9b368b1ce1 =  3:  0d4f1275f7 t2*: adjust the references to the default branch name "main"
  4:  0697ef9742 =  4:  aee29a0528 t3[0-3]*: adjust the references to the default branch name "main"
  5:  e494152c3e =  5:  041ad86e33 t3416: preemptively adjust alignment in a comment
  6:  ec7102156e =  6:  2f62b3f469 t34*: adjust the references to the default branch name "main"
  7:  7a9349653d =  7:  0cf754646e t3[5-9]*: adjust the references to the default branch name "main"
  8:  d141e476b1 =  8:  cf6c1d1d83 t4*: adjust the references to the default branch name "main"
  9:  86c85666d5 =  9:  6ff4594a28 t5323: prepare centered comment for `master` -> `main`
 10:  55b6c04fc0 = 10:  be29e07892 t5[0-4]*: adjust the references to the default branch name "main"
 11:  40cdd5db8c = 11:  5126d90a32 t5503: prepare aligned comment for replacing `master` with `main`
 12:  b5ca6e9acd = 12:  332677cbf9 t550*: adjust the references to the default branch name "main"
 13:  727de6fdf5 = 13:  b7333ef201 t551*: adjust the references to the default branch name "main"
 14:  3aef39320e ! 14:  4b1b1ee51f t55[23]*: adjust the references to the default branch name "main"

@@ Metadata
## Commit message ##
t55[23]*: adjust the references to the default branch name "main"

- This trick was performed via
+ Carefully excluding t5526, which sees independent development elsewhere
+ at the time of writing, we use main as the default branch name in
+ t55[23]*. This trick was performed via

$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
- -e 's/Master/Main/g' -e 's/naster/nain/g' -- t55[23]*.sh)
+ -e 's/Master/Main/g' -e 's/naster/nain/g' -- \
+ t55[23]*.sh &&
+ git checkout HEAD -- t5526\*)

Note that t5533 contains a variation of the name master (naster) that we rename here, too.
@@ t/t5523-push-upstream.sh: test_expect_success TTY 'push --no-progress suppresses
'

- ## t/t5526-fetch-submodules.sh ##
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly re
- test_i18ncmp expect.err actual.err &&
- (
- cd submodule &&
-- git checkout -q master
-+ git checkout -q main
- )
- '
-
-@@ t/t5526-fetch-submodules.sh: test_expect_success 'fetch new submodule commits on-demand without .gitmodules e
- git config -f .gitmodules --remove-section submodule.sub1 &&
- git add .gitmodules &&
- git commit -m "delete gitmodules file" &&
-- git checkout -B master &&
-+ git checkout -B main &&
- git -C downstream fetch &&
-- git -C downstream checkout origin/master &&
-+ git -C downstream checkout origin/main &&
-
- C=$(git -C submodule commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) &&
- git -C submodule update-ref refs/changes/7 $C &&
-
## t/t5527-fetch-odd-refs.sh ##
@@ t/t5527-fetch-odd-refs.sh: test_description='test fetching of oddly-named refs'

@@ t/t5539-fetch-http-shallow.sh: test_expect_success 'fetching deepen' '
three

## t/test-lib.sh ##
-@@ t/test-lib.sh: case "$TEST_NUMBER" in +@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
+ esac
+
+ case "$TEST_NUMBER" in +-3404|4013|5310) ++3404|4013|5310|5526)
+ # Avoid conflicts with patch series that are cooking at the same time
+ # as the patch series changing the default of init.defaultBranch.
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME ;;

 15:  8a2511b38e = 15:  c37d97c2d8 t55[4-9]*: adjust the references to the default branch name "main"
 16:  af24b6d69d = 16:  dda6ce098c t5[6-9]*: adjust the references to the default branch name "main"
 17:  dc8011e4bf ! 17:  27d7994933 t6[0-3]*: adjust the references to the default branch name "main"

@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac

case "$TEST_NUMBER" in
--3404|4013|5310)
-+3404|4013|5310|6300)
+-3404|4013|5310|5526)
++3404|4013|5310|5526|6300)
# Avoid conflicts with patch series that are cooking at the same time # as the patch series changing the default of init.defaultBranch. GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master

 18:  e2f1409399 = 18:  04878e2268 t64*: preemptively adjust alignment to prepare for `master` -> `main`
 19:  1ef276c97e = 19:  f0fa12b577 t6[4-9]*: adjust the references to the default branch name "main"
 20:  7f67471c03 ! 20:  f9c30dc516 t7[0-4]*: adjust the references to the default branch name "main"

@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac

case "$TEST_NUMBER" in
--3404|4013|5310|6300)
-+3404|4013|5310|6300|7064)
+-3404|4013|5310|5526|6300)
++3404|4013|5310|5526|6300|7064)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of init.defaultBranch. GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
21: 07714a8c65 ! 21: 2b269ca983 t7[5-9]*: adjust the references to the default branch name "main"
@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac

case "$TEST_NUMBER" in
--3404|4013|5310|6300|7064)
-+3404|4013|5310|6300|7064|7817) +-3404|4013|5310|5526|6300|7064) ++3404|4013|5310|5526|6300|7064|7817)
# Avoid conflicts with patch series that are cooking at the same time # as the patch series changing the default of init.defaultBranch. GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master

 22:  3a987c452e = 22:  5cac0065c8 t8*: adjust the references to the default branch name "main"
 23:  e788b61074 = 23:  57e90d459a t9[0-4]*: adjust the references to the default branch name "main"
 24:  2367a322c8 = 24:  f9e01de17f t9[5-7]*: adjust the references to the default branch name "main"
 25:  bd32d55eab = 25:  4da4b69114 tests(git-p4): transition to the default branch name `main`
 26:  73100477a8 ! 26:  cfa29c7f71 t99*: adjust the references to the default branch name "main"

@@ t/test-lib.sh: case "$TRASH_DIRECTORY" in
esac

case "$TEST_NUMBER" in
--3404|4013|5310|6300|7064|7817)
-+3404|4013|5310|6300|7064|7817|9902)
+-3404|4013|5310|5526|6300|7064|7817)
++3404|4013|5310|5526|6300|7064|7817|9902)
# Avoid conflicts with patch series that are cooking at the same time
# as the patch series changing the default of init.defaultBranch. GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
27: 09b611a359 ! 27: fc0c1f6463 tests: drop prereq PREPARE_FOR_MAIN_BRANCH where no longer needed
@@ Commit message
master -> main rename before the automatable ones.

Now that the transition is almost complete, we can stop using it in most
- instances. The only exception is t9902: at the time of writing, there
- are other patches in flight that touch this test script, therefore the
- transition to main is postponed to a later date.
+ instances. The only two exceptions are t5526 and t9902: at the time of
+ writing, there are other patches in flight that touch these test
+ scripts, therefore their transition to main is postponed to a later
+ date.

This patch is the result of this command:

sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
- git checkout HEAD -- t/t9902\*
+ git checkout HEAD -- t/t5526\* t/t9902\*

@@ t/t5510-fetch.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH,C_LOCALE_OUTPUT 'f
test_commit extraaa &&
(

- ## t/t5526-fetch-submodules.sh ##
-@@ t/t5526-fetch-submodules.sh: test_expect_success setup '
- )
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules recurses into submodules" '
-+test_expect_success "fetch --recurse-submodules recurses into submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules recurses
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "submodule.recurse option triggers recursive fetch" '
-+test_expect_success "submodule.recurse option triggers recursive fetch" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "submodule.recurse option triggers r
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "fetch --recurse-submodules -j2 has the same output behaviour" '
-+test_expect_success "fetch --recurse-submodules -j2 has the same output behaviour" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "fetch --no-recurse-submodules only fetches superproject" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" ' -+test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" '
- (
- cd downstream &&
- git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "using fetchRecurseSubmodules=false in .git/config overrides
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config" ' -+test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config" '
- (
- cd downstream &&
- git fetch --recurse-submodules >../actual.out 2>../actual.err &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "--quiet propagates to parallel submodules" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--dry-run propagates to submodules" '
-+test_expect_success "--dry-run propagates to submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "--dry-run propagates to submodules"
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Without --dry-run propagates to submodules" '
-+test_expect_success "Without --dry-run propagates to submodules" '
- (
- cd downstream &&
- git fetch --recurse-submodules >../actual.out 2>../actual.err
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Without --dry-run propagates to sub
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "recurseSubmodules=true propagates into submodules" '
-+test_expect_success "recurseSubmodules=true propagates into submodules" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "recurseSubmodules=true propagates i
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "--recurse-submodules overrides config in submodule" '
-+test_expect_success "--recurse-submodules overrides config in submodule" '
- add_upstream_commit &&
- (
- cd downstream &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success "--no-recurse-submodules overrides config setting" '
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when no new commits are fetched in the superproject" ' -+test_expect_success "Recursion doesn't happen when no new commits are fetched in the superproject" '
- (
- cd downstream &&
- (
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when no ne
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion stops when no new submodule commits are fetched" '
-+test_expect_success "Recursion stops when no new submodule commits are fetched" '
- head1=$(git rev-parse --short HEAD) &&
- git add submodule &&
- git commit -m "new submodule" &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion stops when no new submodu
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when new superproject commits don't change any submodules" ' -+test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" '
- add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
- echo a > file &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion doesn't happen when new s
- test_i18ncmp expect.err.file actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up config in submodule" '
-+test_expect_success "Recursion picks up config in submodule" '
- (
- cd downstream &&
- git fetch --recurse-submodules &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up config in submod
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up all submodules when necessary" '
-+test_expect_success "Recursion picks up all submodules when necessary" '
- add_upstream_commit &&
- (
- cd submodule &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "Recursion picks up all submodules w
- test_must_be_empty actual.out
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" ' -+test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" '
- add_upstream_commit &&
- (
- cd submodule &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' do
- test_must_be_empty actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" ' -+test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" '
- head1=$(git rev-parse --short HEAD) &&
- git add submodule &&
- git commit -m "new submodule" &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' re
- test_i18ncmp expect.err actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" ' -+test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
- add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
- echo a >> file &&
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'--recurse-submodules=on-demand' st
- test_i18ncmp expect.err.file actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand' overrides global config" '
-+test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand'
- test_i18ncmp expect.err.2 actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" ' -+test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "'submodule.<sub>.fetchRecurseSubmod
- test_i18ncmp expect.err.2 actual.err
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly recorded commits are already present" '
-+test_expect_success "don't fetch submodule when newly recorded commits are already present" '
- (
- cd submodule &&
- git checkout -q HEAD^^
-@@ t/t5526-fetch-submodules.sh: test_expect_success PREPARE_FOR_MAIN_BRANCH "don't fetch submodule when newly re
- )
- '
-
--test_expect_success PREPARE_FOR_MAIN_BRANCH "'fetch.recurseSubmodules=on-demand' works also without .gitmodules entry" ' -+test_expect_success "'fetch.recurseSubmodules=on-demand' works also without .gitmodules entry" '
- (
- cd downstream &&
- git fetch --recurse-submodules
-
## t/t5703-upload-pack-ref-in-want.sh ##
@@ t/t5703-upload-pack-ref-in-want.sh: test_expect_success 'server is initially behind - ref in want' '
test_cmp expected actual
28: f853fa946f < -: ---------- Change the default branch name to main

Signature · 1 line
gitgitgadget
#61 lore raw

PATCH v2 1/27 t0060: preemptively adjust alignment

From: Johannes Schindelin <[email protected]>

We are about to adjust t0060 for the new default branch name main. This name is two characters shorter and therefore needs two spaces more padding to align correctly.

Adjusting the alignment before the big search-and-replace makes it easier to verify that the final result does not leave any misaligned lines behind.

---
 t/t0060-path-utils.sh | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
t/t0060-path-utils.sh +2 -2
index b2e3cf3f4c..928eebbdc0 100755
@@ -312,8 +312,8 @@ test_git_path GIT_COMMON_DIR=bar info/sparse-checkout     .git/info/sparse-check
 test_git_path GIT_COMMON_DIR=bar info//sparse-checkout    .git/info//sparse-checkout
 test_git_path GIT_COMMON_DIR=bar remotes/bar              bar/remotes/bar
 test_git_path GIT_COMMON_DIR=bar branches/bar             bar/branches/bar
-test_git_path GIT_COMMON_DIR=bar logs/refs/heads/master   bar/logs/refs/heads/master
-test_git_path GIT_COMMON_DIR=bar refs/heads/master        bar/refs/heads/master
+test_git_path GIT_COMMON_DIR=bar logs/refs/heads/master     bar/logs/refs/heads/master
+test_git_path GIT_COMMON_DIR=bar refs/heads/master          bar/refs/heads/master
 test_git_path GIT_COMMON_DIR=bar refs/bisect/foo          .git/refs/bisect/foo
 test_git_path GIT_COMMON_DIR=bar hooks/me                 bar/hooks/me
 test_git_path GIT_COMMON_DIR=bar config                   bar/config
Signature · 1 line
gitgitgadget
#62 lore raw

PATCH v2 2/27 t[01]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh)

Note that t5533 contains a variation of the name master (naster) that we rename here, too.

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t0002-gitfile.sh                   |  6 +--
 t/t0020-crlf.sh                      |  8 ++--
 t/t0021-conversion.sh                | 40 ++++++++--------
 t/t0027-auto-crlf.sh                 |  4 +-
 t/t0028-working-tree-encoding.sh     |  4 +-
 t/t0041-usage.sh                     | 10 ++--
 t/t0050-filesystem.sh                |  6 +--
 t/t0060-path-utils.sh                |  4 +-
 t/t0100-previous.sh                  | 18 ++++----
 t/t1004-read-tree-m-u-wf.sh          | 40 ++++++++--------
 t/t1008-read-tree-overlay.sh         |  2 +-
 t/t1009-read-tree-new-index.sh       |  4 +-
 t/t1011-read-tree-sparse-checkout.sh |  2 +-
 t/t1021-rerere-in-workdir.sh         |  2 +-
 t/t1090-sparse-checkout-scope.sh     | 10 ++--
 t/t1091-sparse-checkout-builtin.sh   |  2 +-
 t/t1300-config.sh                    |  8 ++--
 t/t1301-shared-repo.sh               |  4 +-
 t/t1305-config-include.sh            |  2 +-
 t/t1309-early-config.sh              |  4 +-
 t/t1400-update-ref.sh                | 68 ++++++++++++++--------------
 t/t1402-check-ref-format.sh          | 32 ++++++-------
 t/t1403-show-ref.sh                  | 18 ++++----
 t/t1405-main-ref-store.sh            | 42 ++++++++---------
 t/t1406-submodule-ref-store.sh       | 30 ++++++------
 t/t1407-worktree-ref-store.sh        | 32 ++++++-------
 t/t1408-packed-refs.sh               | 12 ++---
 t/t1410-reflog.sh                    | 56 +++++++++++------------
 t/t1411-reflog-show.sh               |  2 +-
 t/t1413-reflog-detach.sh             | 24 +++++-----
 t/t1414-reflog-walk.sh               | 12 ++---
 t/t1416-ref-transaction-hooks.sh     | 10 ++--
 t/t1430-bad-ref-name.sh              | 52 ++++++++++-----------
 t/t1450-fsck.sh                      |  2 +-
 t/t1500-rev-parse.sh                 |  4 +-
 t/t1503-rev-parse-verify.sh          | 28 ++++++------
 t/t1505-rev-parse-last.sh            |  8 ++--
 t/t1506-rev-parse-diagnosis.sh       |  4 +-
 t/t1507-rev-parse-upstream.sh        | 40 ++++++++--------
 t/t1508-at-combinations.sh           | 10 ++--
 t/t1511-rev-parse-caret.sh           | 26 +++++------
 t/t1512-rev-parse-disambiguation.sh  |  2 +-
 t/t1513-rev-parse-prefix.sh          |  4 +-
 t/t1514-rev-parse-push.sh            | 16 +++----
 t/t1700-split-index.sh               |  2 +-
 t/test-lib.sh                        |  7 +++
 46 files changed, 365 insertions(+), 358 deletions(-)
t/t0002-gitfile.sh +3 -3
index 960ed150cb..bbcfc8a0b5 100755
@@ -96,7 +96,7 @@ test_expect_success 'enter_repo non-strict mode' '
 	git ls-remote enter_repo >actual &&
 	cat >expected <<-EOF &&
 	$head	HEAD
-	$head	refs/heads/master
+	$head	refs/heads/main
 	$head	refs/tags/foo
 	EOF
 	test_cmp expected actual
@@ -111,7 +111,7 @@ test_expect_success 'enter_repo linked checkout' '
 	git ls-remote foo >actual &&
 	cat >expected <<-EOF &&
 	$head	HEAD
-	$head	refs/heads/master
+	$head	refs/heads/main
 	$head	refs/tags/foo
 	EOF
 	test_cmp expected actual
@@ -122,7 +122,7 @@ test_expect_success 'enter_repo strict mode' '
 	git ls-remote --upload-pack="git upload-pack --strict" foo/.git >actual &&
 	cat >expected <<-EOF &&
 	$head	HEAD
-	$head	refs/heads/master
+	$head	refs/heads/main
 	$head	refs/tags/foo
 	EOF
 	test_cmp expected actual
t/t0020-crlf.sh +4 -4
index b63ba62e5d..04bf4b1e82 100755
@@ -318,8 +318,8 @@ test_expect_success 'checkout with existing .gitattributes' '
 	git add .gitattributes .file &&
 	git commit -m second &&
 
-	git checkout master~1 &&
-	git checkout master &&
+	git checkout main~1 &&
+	git checkout main &&
 	test "$(git diff-files --raw)" = ""
 
 '
@@ -331,8 +331,8 @@ test_expect_success 'checkout when deleting .gitattributes' '
 	git add .file2 &&
 	git commit -m third &&
 
-	git checkout master~1 &&
-	git checkout master &&
+	git checkout main~1 &&
+	git checkout main &&
 	has_cr .file2
 
 '
t/t0021-conversion.sh +20 -20
index f6deaf498b..d0eeca4556 100755
@@ -378,8 +378,8 @@ test_expect_success PERL 'required process filter should filter data' '
 		test_cmp_count expected.log debug.log &&
 
 		git commit -m "test commit 2" &&
-		MASTER=$(git rev-parse --verify master) &&
-		META="ref=refs/heads/master treeish=$MASTER" &&
+		MAIN=$(git rev-parse --verify main) &&
+		META="ref=refs/heads/main treeish=$MAIN" &&
 		rm -f test2.r "testsubdir/test3 '\''sq'\'',\$x=.r" &&
 
 		filter_git checkout --quiet --no-progress . &&
@@ -404,7 +404,7 @@ test_expect_success PERL 'required process filter should filter data' '
 		EOF
 		test_cmp_exclude_clean expected.log debug.log &&
 
-		filter_git checkout --quiet --no-progress master &&
+		filter_git checkout --quiet --no-progress main &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -436,15 +436,15 @@ test_expect_success PERL 'required process filter should filter data for various
 		M3=$(git hash-object "testsubdir/test3 '\''sq'\'',\$x=.r") &&
 		EMPTY=$(git hash-object /dev/null) &&
 
-		MASTER=$(git rev-parse --verify master) &&
+		MAIN=$(git rev-parse --verify main) &&
 
 		cp "$TEST_ROOT/test.o" test5.r &&
 		git add test5.r &&
 		git commit -m "test commit 3" &&
 		git checkout empty-branch &&
-		filter_git rebase --onto empty-branch master^^ master &&
-		MASTER2=$(git rev-parse --verify master) &&
-		META="ref=refs/heads/master treeish=$MASTER2" &&
+		filter_git rebase --onto empty-branch main^^ main &&
+		MAIN2=$(git rev-parse --verify main) &&
+		META="ref=refs/heads/main treeish=$MAIN2" &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -458,8 +458,8 @@ test_expect_success PERL 'required process filter should filter data for various
 		test_cmp_exclude_clean expected.log debug.log &&
 
 		git reset --hard empty-branch &&
-		filter_git reset --hard $MASTER &&
-		META="treeish=$MASTER" &&
+		filter_git reset --hard $MAIN &&
+		META="treeish=$MAIN" &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -471,10 +471,10 @@ test_expect_success PERL 'required process filter should filter data for various
 		EOF
 		test_cmp_exclude_clean expected.log debug.log &&
 
-		git branch old-master $MASTER &&
+		git branch old-main $MAIN &&
 		git reset --hard empty-branch &&
-		filter_git reset --hard old-master &&
-		META="ref=refs/heads/old-master treeish=$MASTER" &&
+		filter_git reset --hard old-main &&
+		META="ref=refs/heads/old-main treeish=$MAIN" &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -487,9 +487,9 @@ test_expect_success PERL 'required process filter should filter data for various
 		test_cmp_exclude_clean expected.log debug.log &&
 
 		git checkout -b merge empty-branch &&
-		git branch -f master $MASTER2 &&
-		filter_git merge master &&
-		META="treeish=$MASTER2" &&
+		git branch -f main $MAIN2 &&
+		filter_git merge main &&
+		META="treeish=$MAIN2" &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -502,8 +502,8 @@ test_expect_success PERL 'required process filter should filter data for various
 		EOF
 		test_cmp_exclude_clean expected.log debug.log &&
 
-		filter_git archive master >/dev/null &&
-		META="ref=refs/heads/master treeish=$MASTER2" &&
+		filter_git archive main >/dev/null &&
+		META="ref=refs/heads/main treeish=$MAIN2" &&
 		cat >expected.log <<-EOF &&
 			START
 			init handshake complete
@@ -516,7 +516,7 @@ test_expect_success PERL 'required process filter should filter data for various
 		EOF
 		test_cmp_exclude_clean expected.log debug.log &&
 
-		TREE="$(git rev-parse $MASTER2^{tree})" &&
+		TREE="$(git rev-parse $MAIN2^{tree})" &&
 		filter_git archive $TREE >/dev/null &&
 		META="treeish=$TREE" &&
 		cat >expected.log <<-EOF &&
@@ -856,8 +856,8 @@ test_expect_success PERL 'delayed checkout in process filter' '
 	) &&
 
 	S=$(test_file_size "$TEST_ROOT/test.o") &&
-	PM="ref=refs/heads/master treeish=$(git -C repo rev-parse --verify master) " &&
-	M="${PM}blob=$(git -C repo rev-parse --verify master:test.a)" &&
+	PM="ref=refs/heads/main treeish=$(git -C repo rev-parse --verify main) " &&
+	M="${PM}blob=$(git -C repo rev-parse --verify main:test.a)" &&
 	cat >a.exp <<-EOF &&
 		START
 		init handshake complete
t/t0027-auto-crlf.sh +2 -2
index 9fcd56fab3..51f74a3ddf 100755
@@ -368,9 +368,9 @@ test_expect_success 'ls-files --eol -o Text/Binary' '
 	test_cmp expect actual
 '
 
-test_expect_success 'setup master' '
+test_expect_success 'setup main' '
 	echo >.gitattributes &&
-	git checkout -b master &&
+	git checkout -b main &&
 	git add .gitattributes &&
 	git commit -m "add .gitattributes" . &&
 	printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\nLINETWO\nLINETHREE"     >LF &&
t/t0028-working-tree-encoding.sh +2 -2
index bfc4fb9af5..9c48037884 100755
@@ -215,7 +215,7 @@ test_expect_success 'error if encoding round trip is not the same during refresh
 	TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16le) &&
 	git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16le &&
 	COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) &&
-	git update-ref refs/heads/master $COMMIT &&
+	git update-ref refs/heads/main $COMMIT &&
 
 	test_must_fail git checkout HEAD^ 2>err.out &&
 	test_i18ngrep "error: .* overwritten by checkout:" err.out
@@ -231,7 +231,7 @@ test_expect_success 'error if encoding garbage is already in Git' '
 	TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16) &&
 	git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16 &&
 	COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) &&
-	git update-ref refs/heads/master $COMMIT &&
+	git update-ref refs/heads/main $COMMIT &&
 
 	git diff 2>err.out &&
 	test_i18ngrep "error: BOM is required" err.out
t/t0041-usage.sh +5 -5
index 5b927b76fe..6f93450597 100755
@@ -41,8 +41,8 @@ test_expect_success 'tag usage error' '
 '
 
 test_expect_success 'branch --contains <existent_commit>' '
-	git branch --contains "master" >actual 2>actual.err &&
-	test_i18ngrep "master" actual &&
+	git branch --contains "main" >actual 2>actual.err &&
+	test_i18ngrep "main" actual &&
 	test_line_count = 0 actual.err
 '
 
@@ -54,7 +54,7 @@ test_expect_success 'branch --contains <inexistent_commit>' '
 '
 
 test_expect_success 'branch --no-contains <existent_commit>' '
-	git branch --no-contains "master" >actual 2>actual.err &&
+	git branch --no-contains "main" >actual 2>actual.err &&
 	test_line_count = 0 actual &&
 	test_line_count = 0 actual.err
 '
@@ -73,7 +73,7 @@ test_expect_success 'branch usage error' '
 '
 
 test_expect_success 'for-each-ref --contains <existent_object>' '
-	git for-each-ref --contains "master" >actual 2>actual.err &&
+	git for-each-ref --contains "main" >actual 2>actual.err &&
 	test_line_count = 2 actual &&
 	test_line_count = 0 actual.err
 '
@@ -86,7 +86,7 @@ test_expect_success 'for-each-ref --contains <inexistent_object>' '
 '
 
 test_expect_success 'for-each-ref --no-contains <existent_object>' '
-	git for-each-ref --no-contains "master" >actual 2>actual.err &&
+	git for-each-ref --no-contains "main" >actual 2>actual.err &&
 	test_line_count = 0 actual &&
 	test_line_count = 0 actual.err
 '
t/t0050-filesystem.sh +3 -3
index 608673fb77..e3412b896b 100755
@@ -65,7 +65,7 @@ test_expect_success "setup case tests" '
 	git mv camelcase tmp &&
 	git mv tmp CamelCase &&
 	git commit -m "rename" &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'rename (case change)' '
@@ -118,7 +118,7 @@ test_expect_success "setup unicode normalization tests" '
 	git mv $aumlcdiar tmp &&
 	git mv tmp "$auml" &&
 	git commit -m rename &&
-	git checkout -f master
+	git checkout -f main
 '
 
 $test_unicode 'rename (silent unicode normalization)' '
@@ -147,7 +147,7 @@ test_expect_success CASE_INSENSITIVE_FS 'checkout with no pathspec and a case in
 		git add gitweb &&
 		git commit -m "add gitweb/subdir/file" &&
 
-		git checkout master
+		git checkout main
 	)
 '
 
t/t0060-path-utils.sh +2 -2
index 928eebbdc0..fab077b6f7 100755
@@ -312,8 +312,8 @@ test_git_path GIT_COMMON_DIR=bar info/sparse-checkout     .git/info/sparse-check
 test_git_path GIT_COMMON_DIR=bar info//sparse-checkout    .git/info//sparse-checkout
 test_git_path GIT_COMMON_DIR=bar remotes/bar              bar/remotes/bar
 test_git_path GIT_COMMON_DIR=bar branches/bar             bar/branches/bar
-test_git_path GIT_COMMON_DIR=bar logs/refs/heads/master     bar/logs/refs/heads/master
-test_git_path GIT_COMMON_DIR=bar refs/heads/master          bar/refs/heads/master
+test_git_path GIT_COMMON_DIR=bar logs/refs/heads/main     bar/logs/refs/heads/main
+test_git_path GIT_COMMON_DIR=bar refs/heads/main          bar/refs/heads/main
 test_git_path GIT_COMMON_DIR=bar refs/bisect/foo          .git/refs/bisect/foo
 test_git_path GIT_COMMON_DIR=bar hooks/me                 bar/hooks/me
 test_git_path GIT_COMMON_DIR=bar config                   bar/config
t/t0100-previous.sh +9 -9
index 58c0b7e9b6..dfb367b720 100755
@@ -8,7 +8,7 @@ test_expect_success 'branch -d @{-1}' '
 	test_commit A &&
 	git checkout -b junk &&
 	git checkout - &&
-	test "$(git symbolic-ref HEAD)" = refs/heads/master &&
+	test "$(git symbolic-ref HEAD)" = refs/heads/main &&
 	git branch -d @{-1} &&
 	test_must_fail git rev-parse --verify refs/heads/junk
 '
@@ -17,9 +17,9 @@ test_expect_success 'branch -d @{-12} when there is not enough switches yet' '
 	git reflog expire --expire=now &&
 	git checkout -b junk2 &&
 	git checkout - &&
-	test "$(git symbolic-ref HEAD)" = refs/heads/master &&
+	test "$(git symbolic-ref HEAD)" = refs/heads/main &&
 	test_must_fail git branch -d @{-12} &&
-	git rev-parse --verify refs/heads/master
+	git rev-parse --verify refs/heads/main
 '
 
 test_expect_success 'merge @{-1}' '
@@ -28,19 +28,19 @@ test_expect_success 'merge @{-1}' '
 	git checkout A &&
 	test_commit C &&
 	test_commit D &&
-	git branch -f master B &&
+	git branch -f main B &&
 	git branch -f other &&
 	git checkout other &&
-	git checkout master &&
+	git checkout main &&
 	git merge @{-1} &&
 	git cat-file commit HEAD | grep "Merge branch '\''other'\''"
 '
 
 test_expect_success 'merge @{-1}~1' '
-	git checkout master &&
+	git checkout main &&
 	git reset --hard B &&
 	git checkout other &&
-	git checkout master &&
+	git checkout main &&
 	git merge @{-1}~1 &&
 	git cat-file commit HEAD >actual &&
 	grep "Merge branch '\''other'\''" actual
@@ -48,11 +48,11 @@ test_expect_success 'merge @{-1}~1' '
 
 test_expect_success 'merge @{-100} before checking out that many branches yet' '
 	git reflog expire --expire=now &&
-	git checkout -f master &&
+	git checkout -f main &&
 	git reset --hard B &&
 	git branch -f other C &&
 	git checkout other &&
-	git checkout master &&
+	git checkout main &&
 	test_must_fail git merge @{-100}
 '
 
t/t1004-read-tree-m-u-wf.sh +20 -20
index 181956b241..c8a81f180f 100755
@@ -20,17 +20,17 @@ test_expect_success 'two-way setup' '
 	git branch side &&
 	git tag -f branch-point &&
 
-	echo file2 is not tracked on the master branch anymore &&
+	echo file2 is not tracked on the main branch anymore &&
 	rm -f file2 subdir/file2 &&
 	git update-index --remove file2 subdir/file2 &&
-	git commit -a -m "master removes file2 and subdir/file2"
+	git commit -a -m "main removes file2 and subdir/file2"
 '
 
 test_expect_success 'two-way not clobbering' '
 
-	echo >file2 master creates untracked file2 &&
-	echo >subdir/file2 master creates untracked subdir/file2 &&
-	if err=$(read_tree_u_must_succeed -m -u master side 2>&1)
+	echo >file2 main creates untracked file2 &&
+	echo >subdir/file2 main creates untracked subdir/file2 &&
+	if err=$(read_tree_u_must_succeed -m -u main side 2>&1)
 	then
 		echo should have complained
 		false
@@ -43,7 +43,7 @@ echo file2 >.gitignore
 
 test_expect_success 'two-way with incorrect --exclude-per-directory (1)' '
 
-	if err=$(read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1)
+	if err=$(read_tree_u_must_succeed -m --exclude-per-directory=.gitignore main side 2>&1)
 	then
 		echo should have complained
 		false
@@ -54,7 +54,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (1)' '
 
 test_expect_success 'two-way with incorrect --exclude-per-directory (2)' '
 
-	if err=$(read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1)
+	if err=$(read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore main side 2>&1)
 	then
 		echo should have complained
 		false
@@ -65,7 +65,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (2)' '
 
 test_expect_success 'two-way clobbering a ignored file' '
 
-	read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore master side
+	read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore main side
 '
 
 rm -f .gitignore
@@ -81,21 +81,21 @@ test_expect_success 'three-way not complaining on an untracked path in both' '
 	git update-index --add file3 subdir/file3 &&
 	git commit -a -m "side adds file3 and removes file2" &&
 
-	git checkout master &&
-	echo >file2 file two is untracked on the master side &&
-	echo >subdir/file2 file two is untracked on the master side &&
+	git checkout main &&
+	echo >file2 file two is untracked on the main side &&
+	echo >subdir/file2 file two is untracked on the main side &&
 
-	read_tree_u_must_succeed -m -u branch-point master side
+	read_tree_u_must_succeed -m -u branch-point main side
 '
 
 test_expect_success 'three-way not clobbering a working tree file' '
 
 	git reset --hard &&
 	rm -f file2 subdir/file2 file3 subdir/file3 &&
-	git checkout master &&
-	echo >file3 file three created in master, untracked &&
-	echo >subdir/file3 file three created in master, untracked &&
-	if err=$(read_tree_u_must_succeed -m -u branch-point master side 2>&1)
+	git checkout main &&
+	echo >file3 file three created in main, untracked &&
+	echo >subdir/file3 file three created in main, untracked &&
+	if err=$(read_tree_u_must_succeed -m -u branch-point main side 2>&1)
 	then
 		echo should have complained
 		false
@@ -110,11 +110,11 @@ test_expect_success 'three-way not complaining on an untracked file' '
 
 	git reset --hard &&
 	rm -f file2 subdir/file2 file3 subdir/file3 &&
-	git checkout master &&
-	echo >file3 file three created in master, untracked &&
-	echo >subdir/file3 file three created in master, untracked &&
+	git checkout main &&
+	echo >file3 file three created in main, untracked &&
+	echo >subdir/file3 file three created in main, untracked &&
 
-	read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore branch-point master side
+	read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore branch-point main side
 '
 
 test_expect_success '3-way not overwriting local changes (setup)' '
t/t1008-read-tree-overlay.sh +1 -1
index cf96016844..2a757bd6d5 100755
@@ -22,7 +22,7 @@ test_expect_success setup '
 '
 
 test_expect_success 'multi-read' '
-	read_tree_must_succeed initial master side &&
+	read_tree_must_succeed initial main side &&
 	test_write_lines a b/c >expect &&
 	git ls-files >actual &&
 	test_cmp expect actual
t/t1009-read-tree-new-index.sh +2 -2
index 59b3aa4bc4..7302adfb20 100755
@@ -12,13 +12,13 @@ test_expect_success setup '
 
 test_expect_success 'non-existent index file' '
 	rm -f new-index &&
-	GIT_INDEX_FILE=new-index git read-tree master
+	GIT_INDEX_FILE=new-index git read-tree main
 '
 
 test_expect_success 'empty index file' '
 	rm -f new-index &&
 	> new-index &&
-	GIT_INDEX_FILE=new-index git read-tree master
+	GIT_INDEX_FILE=new-index git read-tree main
 '
 
 test_done
t/t1011-read-tree-sparse-checkout.sh +1 -1
index 140f459977..dfe9794a74 100755
@@ -2,7 +2,7 @@
 
 test_description='sparse checkout tests
 
-* (tag: removed, master) removed
+* (tag: removed, main) removed
 | D	sub/added
 * (HEAD, tag: top) modified and added
 | M	init.t
t/t1021-rerere-in-workdir.sh +1 -1
index 301e071ff7..a32b4a50e0 100755
@@ -19,7 +19,7 @@ test_expect_success SYMLINKS setup '
 	test_tick &&
 	git commit -a -m goodbye &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success SYMLINKS 'rerere in workdir' '
t/t1090-sparse-checkout-scope.sh +5 -5
index f35a73dd20..6c253fd526 100755
@@ -20,18 +20,18 @@ test_expect_success 'create feature branch' '
 	git commit -m "modification"
 '
 
-test_expect_success 'perform sparse checkout of master' '
+test_expect_success 'perform sparse checkout of main' '
 	git config --local --bool core.sparsecheckout true &&
 	echo "!/*" >.git/info/sparse-checkout &&
 	echo "/a" >>.git/info/sparse-checkout &&
 	echo "/c" >>.git/info/sparse-checkout &&
-	git checkout master &&
+	git checkout main &&
 	test_path_is_file a &&
 	test_path_is_missing b &&
 	test_path_is_file c
 '
 
-test_expect_success 'merge feature branch into sparse checkout of master' '
+test_expect_success 'merge feature branch into sparse checkout of main' '
 	git merge feature &&
 	test_path_is_file a &&
 	test_path_is_missing b &&
@@ -39,10 +39,10 @@ test_expect_success 'merge feature branch into sparse checkout of master' '
 	test "$(cat c)" = "modified"
 '
 
-test_expect_success 'return to full checkout of master' '
+test_expect_success 'return to full checkout of main' '
 	git checkout feature &&
 	echo "/*" >.git/info/sparse-checkout &&
-	git checkout master &&
+	git checkout main &&
 	test_path_is_file a &&
 	test_path_is_file b &&
 	test_path_is_file c &&
t/t1091-sparse-checkout-builtin.sh +1 -1
index 84acfc48b6..4ee16805bb 100755
@@ -117,7 +117,7 @@ test_expect_success 'interaction with clone --no-checkout (unborn index)' '
 	test_path_is_missing clone_no_checkout/.git/index &&
 
 	# No branch is checked out until we manually switch to one
-	git -C clone_no_checkout switch master &&
+	git -C clone_no_checkout switch main &&
 	test_path_is_file clone_no_checkout/.git/index &&
 	check_files clone_no_checkout a folder1
 '
t/t1300-config.sh +4 -4
index 825d9a184f..11a8e641da 100755
@@ -1054,8 +1054,8 @@ test_expect_success 'check split_cmdline return' "
 	echo foo > foo &&
 	git add foo &&
 	git commit -m 'initial commit' &&
-	git config branch.master.mergeoptions 'echo \"' &&
-	test_must_fail git merge master
+	git config branch.main.mergeoptions 'echo \"' &&
+	test_must_fail git merge main
 "
 
 test_expect_success 'git -c "key=value" support' '
@@ -1769,11 +1769,11 @@ test_expect_success '--show-origin blob' '
 
 test_expect_success '--show-origin blob ref' '
 	cat >expect <<-\EOF &&
-	blob:master:custom.conf	user.custom=true
+	blob:main:custom.conf	user.custom=true
 	EOF
 	git add "$CUSTOM_CONFIG_FILE" &&
 	git commit -m "new config file" &&
-	git config --blob=master:"$CUSTOM_CONFIG_FILE" --show-origin --list >output &&
+	git config --blob=main:"$CUSTOM_CONFIG_FILE" --show-origin --list >output &&
 	test_cmp expect output
 '
 
t/t1301-shared-repo.sh +2 -2
index 2dc853d1be..b0236ffe4a 100755
@@ -115,13 +115,13 @@ test_expect_success POSIXPERM 'git reflog expire honors core.sharedRepository' '
 	umask 077 &&
 	git config core.sharedRepository group &&
 	git reflog expire --all &&
-	actual="$(ls -l .git/logs/refs/heads/master)" &&
+	actual="$(ls -l .git/logs/refs/heads/main)" &&
 	case "$actual" in
 	-rw-rw-*)
 		: happy
 		;;
 	*)
-		echo Ooops, .git/logs/refs/heads/master is not 0662 [$actual]
+		echo Ooops, .git/logs/refs/heads/main is not 0662 [$actual]
 		false
 		;;
 	esac
t/t1305-config-include.sh +1 -1
index f1e1b289f9..938ca17d78 100755
@@ -312,7 +312,7 @@ test_expect_success SYMLINKS 'conditional include, gitdir matching symlink, icas
 test_expect_success 'conditional include, onbranch' '
 	echo "[includeIf \"onbranch:foo-branch\"]path=bar9" >>.git/config &&
 	echo "[test]nine=9" >.git/bar9 &&
-	git checkout -b master &&
+	git checkout -b main &&
 	test_must_fail git config test.nine &&
 	git checkout -b foo-branch &&
 	echo 9 >expect &&
t/t1309-early-config.sh +2 -2
index ebb8e1aecb..598e62eb4c 100755
@@ -91,11 +91,11 @@ test_expect_failure 'ignore .git/ with invalid config' '
 
 test_expect_success 'early config and onbranch' '
 	echo "[broken" >broken &&
-	test_with_config "[includeif \"onbranch:master\"]path=../broken"
+	test_with_config "[includeif \"onbranch:main\"]path=../broken"
 '
 
 test_expect_success 'onbranch config outside of git repo' '
-	test_config_global includeIf.onbranch:master.path non-existent &&
+	test_config_global includeIf.onbranch:main.path non-existent &&
 	nongit git help
 '
 
t/t1400-update-ref.sh +34 -34

155 lines not on this page · raw message

t/t1402-check-ref-format.sh +16 -16
index 98e4a8613b..cabc516ae9 100755
@@ -134,18 +134,18 @@ valid_ref !MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize'
 test_expect_success "check-ref-format --branch @{-1}" '
 	T=$(git write-tree) &&
 	sha1=$(echo A | git commit-tree $T) &&
-	git update-ref refs/heads/master $sha1 &&
-	git update-ref refs/remotes/origin/master $sha1 &&
-	git checkout master &&
-	git checkout origin/master &&
-	git checkout master &&
+	git update-ref refs/heads/main $sha1 &&
+	git update-ref refs/remotes/origin/main $sha1 &&
+	git checkout main &&
+	git checkout origin/main &&
+	git checkout main &&
 	refname=$(git check-ref-format --branch @{-1}) &&
 	test "$refname" = "$sha1" &&
 	refname2=$(git check-ref-format --branch @{-2}) &&
-	test "$refname2" = master'
+	test "$refname2" = main'
 
-test_expect_success 'check-ref-format --branch -naster' '
-	test_must_fail git check-ref-format --branch -naster >actual &&
+test_expect_success 'check-ref-format --branch -nain' '
+	test_must_fail git check-ref-format --branch -nain >actual &&
 	test_must_be_empty actual
 '
 
@@ -154,11 +154,11 @@ test_expect_success 'check-ref-format --branch from subdir' '
 
 	T=$(git write-tree) &&
 	sha1=$(echo A | git commit-tree $T) &&
-	git update-ref refs/heads/master $sha1 &&
-	git update-ref refs/remotes/origin/master $sha1 &&
-	git checkout master &&
-	git checkout origin/master &&
-	git checkout master &&
+	git update-ref refs/heads/main $sha1 &&
+	git update-ref refs/remotes/origin/main $sha1 &&
+	git checkout main &&
+	git checkout origin/main &&
+	git checkout main &&
 	refname=$(
 		cd subdir &&
 		git check-ref-format --branch @{-1}
@@ -171,9 +171,9 @@ test_expect_success 'check-ref-format --branch @{-1} from non-repo' '
 	test_must_be_empty actual
 '
 
-test_expect_success 'check-ref-format --branch master from non-repo' '
-	echo master >expect &&
-	nongit git check-ref-format --branch master >actual &&
+test_expect_success 'check-ref-format --branch main from non-repo' '
+	echo main >expect &&
+	nongit git check-ref-format --branch main >actual &&
 	test_cmp expect actual
 '
 
t/t1403-show-ref.sh +9 -9
index 5d955c3bff..681b7022c3 100755
@@ -9,7 +9,7 @@ test_expect_success setup '
 	git checkout -b side &&
 	test_commit B &&
 	git tag -f -a -m "annotated B" B &&
-	git checkout master &&
+	git checkout main &&
 	test_commit C &&
 	git branch B A^0
 '
@@ -92,23 +92,23 @@ test_expect_success 'show-ref -d' '
 	git show-ref --verify -d refs/tags/A refs/tags/C >actual &&
 	test_cmp expect actual &&
 
-	echo $(git rev-parse refs/heads/master) refs/heads/master >expect &&
-	git show-ref -d master >actual &&
+	echo $(git rev-parse refs/heads/main) refs/heads/main >expect &&
+	git show-ref -d main >actual &&
 	test_cmp expect actual &&
 
-	git show-ref -d heads/master >actual &&
+	git show-ref -d heads/main >actual &&
 	test_cmp expect actual &&
 
-	git show-ref -d refs/heads/master >actual &&
+	git show-ref -d refs/heads/main >actual &&
 	test_cmp expect actual &&
 
-	git show-ref -d --verify refs/heads/master >actual &&
+	git show-ref -d --verify refs/heads/main >actual &&
 	test_cmp expect actual &&
 
-	test_must_fail git show-ref -d --verify master >actual &&
+	test_must_fail git show-ref -d --verify main >actual &&
 	test_must_be_empty actual &&
 
-	test_must_fail git show-ref -d --verify heads/master >actual &&
+	test_must_fail git show-ref -d --verify heads/main >actual &&
 	test_must_be_empty actual &&
 
 	test_must_fail git show-ref --verify -d A C >actual &&
@@ -120,7 +120,7 @@ test_expect_success 'show-ref -d' '
 '
 
 test_expect_success 'show-ref --heads, --tags, --head, pattern' '
-	for branch in B master side
+	for branch in B main side
 	do
 		echo $(git rev-parse refs/heads/$branch) refs/heads/$branch
 	done >expect.heads &&
t/t1405-main-ref-store.sh +21 -21

91 lines not on this page · raw message

t/t1406-submodule-ref-store.sh +15 -15
index 36b7ef5046..e3e3b9c84c 100755
@@ -11,7 +11,7 @@ test_expect_success 'setup' '
 	(
 		cd sub &&
 		test_commit first &&
-		git checkout -b new-master
+		git checkout -b new-main
 	)
 '
 
@@ -27,7 +27,7 @@ test_expect_success 'peel_ref(new-tag)' '
 '
 
 test_expect_success 'create_symref() not allowed' '
-	test_must_fail $RUN create-symref FOO refs/heads/master nothing
+	test_must_fail $RUN create-symref FOO refs/heads/main nothing
 '
 
 test_expect_success 'delete_refs() not allowed' '
@@ -35,14 +35,14 @@ test_expect_success 'delete_refs() not allowed' '
 '
 
 test_expect_success 'rename_refs() not allowed' '
-	test_must_fail $RUN rename-ref refs/heads/master refs/heads/new-master
+	test_must_fail $RUN rename-ref refs/heads/main refs/heads/new-main
 '
 
 test_expect_success 'for_each_ref(refs/heads/)' '
 	$RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual &&
 	cat >expected <<-\EOF &&
-	master 0x0
-	new-master 0x0
+	main 0x0
+	new-main 0x0
 	EOF
 	test_cmp expected actual
 '
@@ -53,23 +53,23 @@ test_expect_success 'for_each_ref() is sorted' '
 	test_cmp expected actual
 '
 
-test_expect_success 'resolve_ref(master)' '
-	SHA1=`git -C sub rev-parse master` &&
-	echo "$SHA1 refs/heads/master 0x0" >expected &&
-	$RUN resolve-ref refs/heads/master 0 >actual &&
+test_expect_success 'resolve_ref(main)' '
+	SHA1=`git -C sub rev-parse main` &&
+	echo "$SHA1 refs/heads/main 0x0" >expected &&
+	$RUN resolve-ref refs/heads/main 0 >actual &&
 	test_cmp expected actual
 '
 
-test_expect_success 'verify_ref(new-master)' '
-	$RUN verify-ref refs/heads/new-master
+test_expect_success 'verify_ref(new-main)' '
+	$RUN verify-ref refs/heads/new-main
 '
 
 test_expect_success 'for_each_reflog()' '
 	$RUN for-each-reflog | sort | cut -d" " -f 2- >actual &&
 	cat >expected <<-\EOF &&
 	HEAD 0x1
-	refs/heads/master 0x0
-	refs/heads/new-master 0x0
+	refs/heads/main 0x0
+	refs/heads/new-main 0x0
 	EOF
 	test_cmp expected actual
 '
@@ -77,12 +77,12 @@ test_expect_success 'for_each_reflog()' '
 test_expect_success 'for_each_reflog_ent()' '
 	$RUN for-each-reflog-ent HEAD >actual &&
 	head -n1 actual | grep first &&
-	tail -n2 actual | head -n1 | grep master.to.new
+	tail -n2 actual | head -n1 | grep main.to.new
 '
 
 test_expect_success 'for_each_reflog_ent_reverse()' '
 	$RUN for-each-reflog-ent-reverse HEAD >actual &&
-	head -n1 actual | grep master.to.new &&
+	head -n1 actual | grep main.to.new &&
 	tail -n2 actual | head -n1 | grep first
 '
 
t/t1407-worktree-ref-store.sh +16 -16
index 9a84858118..71059cb254 100755
@@ -9,7 +9,7 @@ RMAIN="test-tool ref-store worktree:main"
 
 test_expect_success 'setup' '
 	test_commit first &&
-	git worktree add -b wt-master wt &&
+	git worktree add -b wt-main wt &&
 	(
 		cd wt &&
 		test_commit second
@@ -17,34 +17,34 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'resolve_ref(<shared-ref>)' '
-	SHA1=`git rev-parse master` &&
-	echo "$SHA1 refs/heads/master 0x0" >expected &&
-	$RWT resolve-ref refs/heads/master 0 >actual &&
+	SHA1=`git rev-parse main` &&
+	echo "$SHA1 refs/heads/main 0x0" >expected &&
+	$RWT resolve-ref refs/heads/main 0 >actual &&
 	test_cmp expected actual &&
-	$RMAIN resolve-ref refs/heads/master 0 >actual &&
+	$RMAIN resolve-ref refs/heads/main 0 >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'resolve_ref(<per-worktree-ref>)' '
 	SHA1=`git -C wt rev-parse HEAD` &&
-	echo "$SHA1 refs/heads/wt-master 0x1" >expected &&
+	echo "$SHA1 refs/heads/wt-main 0x1" >expected &&
 	$RWT resolve-ref HEAD 0 >actual &&
 	test_cmp expected actual &&
 
 	SHA1=`git rev-parse HEAD` &&
-	echo "$SHA1 refs/heads/master 0x1" >expected &&
+	echo "$SHA1 refs/heads/main 0x1" >expected &&
 	$RMAIN resolve-ref HEAD 0 >actual &&
 	test_cmp expected actual
 '
 
-test_expect_success 'create_symref(FOO, refs/heads/master)' '
-	$RWT create-symref FOO refs/heads/master nothing &&
-	echo refs/heads/master >expected &&
+test_expect_success 'create_symref(FOO, refs/heads/main)' '
+	$RWT create-symref FOO refs/heads/main nothing &&
+	echo refs/heads/main >expected &&
 	git -C wt symbolic-ref FOO >actual &&
 	test_cmp expected actual &&
 
-	$RMAIN create-symref FOO refs/heads/wt-master nothing &&
-	echo refs/heads/wt-master >expected &&
+	$RMAIN create-symref FOO refs/heads/wt-main nothing &&
+	echo refs/heads/wt-main >expected &&
 	git symbolic-ref FOO >actual &&
 	test_cmp expected actual
 '
@@ -63,8 +63,8 @@ test_expect_success 'for_each_reflog()' '
 	HEAD 0x1
 	PSEUDO-WT 0x0
 	refs/bisect/wt-random 0x0
-	refs/heads/master 0x0
-	refs/heads/wt-master 0x0
+	refs/heads/main 0x0
+	refs/heads/wt-main 0x0
 	EOF
 	test_cmp expected actual &&
 
@@ -73,8 +73,8 @@ test_expect_success 'for_each_reflog()' '
 	HEAD 0x1
 	PSEUDO-MAIN 0x0
 	refs/bisect/random 0x0
-	refs/heads/master 0x0
-	refs/heads/wt-master 0x0
+	refs/heads/main 0x0
+	refs/heads/wt-main 0x0
 	EOF
 	test_cmp expected actual
 '
t/t1408-packed-refs.sh +6 -6
index 1e44a17eea..f40e7af8ce 100755
@@ -9,32 +9,32 @@ test_expect_success setup '
 	git commit --allow-empty -m one &&
 	one=$(git rev-parse HEAD) &&
 	git for-each-ref >actual &&
-	echo "$one commit	refs/heads/master" >expect &&
+	echo "$one commit	refs/heads/main" >expect &&
 	test_cmp expect actual &&
 
 	git pack-refs --all &&
 	git for-each-ref >actual &&
-	echo "$one commit	refs/heads/master" >expect &&
+	echo "$one commit	refs/heads/main" >expect &&
 	test_cmp expect actual &&
 
 	git checkout --orphan another &&
 	test_tick &&
 	git commit --allow-empty -m two &&
 	two=$(git rev-parse HEAD) &&
-	git checkout -B master &&
+	git checkout -B main &&
 	git branch -D another &&
 
 	git for-each-ref >actual &&
-	echo "$two commit	refs/heads/master" >expect &&
+	echo "$two commit	refs/heads/main" >expect &&
 	test_cmp expect actual &&
 
 	git reflog expire --expire=now --all &&
 	git prune &&
-	git tag -m v1.0 v1.0 master
+	git tag -m v1.0 v1.0 main
 '
 
 test_expect_success 'no error from stale entry in packed-refs' '
-	git describe master >actual 2>&1 &&
+	git describe main >actual 2>&1 &&
 	echo "v1.0" >expect &&
 	test_cmp expect actual
 '
t/t1410-reflog.sh +28 -28

161 lines not on this page · raw message

t/t1411-reflog-show.sh +1 -1
index 985daf1def..333b35aebc 100755
@@ -167,7 +167,7 @@ test_expect_success 'git log -g -p shows diffs vs. parents' '
 '
 
 test_expect_success 'reflog exists works' '
-	git reflog exists refs/heads/master &&
+	git reflog exists refs/heads/main &&
 	! git reflog exists refs/heads/nonexistent
 '
 
t/t1413-reflog-detach.sh +12 -12
index c730600d8a..b1f7f35fe9 100755
@@ -4,7 +4,7 @@ test_description='Test reflog interaction with detached HEAD'
 . ./test-lib.sh
 
 reset_state () {
-	git checkout master &&
+	git checkout main &&
 	cp saved_reflog .git/logs/HEAD
 }
 
@@ -19,14 +19,14 @@ test_expect_success setup '
 
 test_expect_success baseline '
 	reset_state &&
-	git rev-parse master master^ >expect &&
+	git rev-parse main main^ >expect &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'switch to branch' '
 	reset_state &&
-	git rev-parse side master master^ >expect &&
+	git rev-parse side main main^ >expect &&
 	git checkout side &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
@@ -34,34 +34,34 @@ test_expect_success 'switch to branch' '
 
 test_expect_success 'detach to other' '
 	reset_state &&
-	git rev-parse master side master master^ >expect &&
+	git rev-parse main side main main^ >expect &&
 	git checkout side &&
-	git checkout master^0 &&
+	git checkout main^0 &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'detach to self' '
 	reset_state &&
-	git rev-parse master master master^ >expect &&
-	git checkout master^0 &&
+	git rev-parse main main main^ >expect &&
+	git checkout main^0 &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'attach to self' '
 	reset_state &&
-	git rev-parse master master master master^ >expect &&
-	git checkout master^0 &&
-	git checkout master &&
+	git rev-parse main main main main^ >expect &&
+	git checkout main^0 &&
+	git checkout main &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'attach to other' '
 	reset_state &&
-	git rev-parse side master master master^ >expect &&
-	git checkout master^0 &&
+	git rev-parse side main main main^ >expect &&
+	git checkout main^0 &&
 	git checkout side &&
 	git log -g --format=%H >actual &&
 	test_cmp expect actual
t/t1414-reflog-walk.sh +6 -6
index 1181a9fb28..89458b7158 100755
@@ -8,7 +8,7 @@ test_expect_success 'set up some reflog entries' '
 	test_commit two &&
 	git checkout -b side HEAD^ &&
 	test_commit three &&
-	git merge --no-commit master &&
+	git merge --no-commit main &&
 	echo evil-merge-content >>one.t &&
 	test_tick &&
 	git commit --no-edit -a
@@ -20,9 +20,9 @@ do_walk () {
 
 test_expect_success 'set up expected reflog' '
 	cat >expect.all <<-EOF
-	HEAD@{0} commit (merge): Merge branch ${SQ}master${SQ} into side
+	HEAD@{0} commit (merge): Merge branch ${SQ}main${SQ} into side
 	HEAD@{1} commit: three
-	HEAD@{2} checkout: moving from master to side
+	HEAD@{2} checkout: moving from main to side
 	HEAD@{3} commit: two
 	HEAD@{4} commit (initial): one
 	EOF
@@ -73,15 +73,15 @@ test_expect_success 'walking multiple reflogs shows all' '
 	#      sort ignores the bits after the timestamp.
 	#
 	#   2. POSIX leaves undefined whether this is a stable sort or not. So
-	#      we use "-k 1" to ensure that we see HEAD before master before
+	#      we use "-k 1" to ensure that we see HEAD before main before
 	#      side when breaking ties.
 	{
 		do_walk --date=unix HEAD &&
 		do_walk --date=unix side &&
-		do_walk --date=unix master
+		do_walk --date=unix main
 	} >expect.raw &&
 	sort -t "{" -k 2nr -k 1 <expect.raw >expect &&
-	do_walk --date=unix HEAD master side >actual &&
+	do_walk --date=unix HEAD main side >actual &&
 	test_cmp expect actual
 '
 
t/t1416-ref-transaction-hooks.sh +5 -5
index f6e741c6c0..4cabc07c86 100755
@@ -53,11 +53,11 @@ test_expect_success 'hook gets all queued updates in prepared state' '
 	EOF
 	cat >expect <<-EOF &&
 		$ZERO_OID $POST_OID HEAD
-		$ZERO_OID $POST_OID refs/heads/master
+		$ZERO_OID $POST_OID refs/heads/main
 	EOF
 	git update-ref HEAD POST <<-EOF &&
 		update HEAD $ZERO_OID $POST_OID
-		update refs/heads/master $ZERO_OID $POST_OID
+		update refs/heads/main $ZERO_OID $POST_OID
 	EOF
 	test_cmp expect actual
 '
@@ -76,7 +76,7 @@ test_expect_success 'hook gets all queued updates in committed state' '
 	EOF
 	cat >expect <<-EOF &&
 		$ZERO_OID $POST_OID HEAD
-		$ZERO_OID $POST_OID refs/heads/master
+		$ZERO_OID $POST_OID refs/heads/main
 	EOF
 	git update-ref HEAD POST &&
 	test_cmp expect actual
@@ -96,12 +96,12 @@ test_expect_success 'hook gets all queued updates in aborted state' '
 	EOF
 	cat >expect <<-EOF &&
 		$ZERO_OID $POST_OID HEAD
-		$ZERO_OID $POST_OID refs/heads/master
+		$ZERO_OID $POST_OID refs/heads/main
 	EOF
 	git update-ref --stdin <<-EOF &&
 		start
 		update HEAD POST $ZERO_OID
-		update refs/heads/master POST $ZERO_OID
+		update refs/heads/main POST $ZERO_OID
 		abort
 	EOF
 	test_cmp expect actual
t/t1430-bad-ref-name.sh +26 -26

193 lines not on this page · raw message

t/t1450-fsck.sh +1 -1
index b17f5c21fb..a30fc5f74a 100755
@@ -3,7 +3,7 @@
 test_description='git fsck random collection of tests
 
 * (HEAD) B
-* (master) A
+* (main) A
 '
 
 . ./test-lib.sh
t/t1500-rev-parse.sh +2 -2
index 408b97d5af..a85692ffff 100755
@@ -174,8 +174,8 @@ test_expect_success 'showing the superproject correctly' '
 	test_commit -C super/dir/sub branch1_commit &&
 	git -C super add dir/sub &&
 	test_commit -C super branch1_commit &&
-	git -C super checkout -b branch2 master &&
-	git -C super/dir/sub checkout -b branch2 master &&
+	git -C super checkout -b branch2 main &&
+	git -C super/dir/sub checkout -b branch2 main &&
 	test_commit -C super/dir/sub branch2_commit &&
 	git -C super add dir/sub &&
 	test_commit -C super branch2_commit &&
t/t1503-rev-parse-verify.sh +14 -14
index dc9fe3cbf1..de63186587 100755
@@ -51,8 +51,8 @@ test_expect_success 'works with one good rev' '
 	test "$rev_hash3" = "$HASH3" &&
 	rev_hash4=$(git rev-parse --verify $HASH4) &&
 	test "$rev_hash4" = "$HASH4" &&
-	rev_master=$(git rev-parse --verify master) &&
-	test "$rev_master" = "$HASH4" &&
+	rev_main=$(git rev-parse --verify main) &&
+	test "$rev_main" = "$HASH4" &&
 	rev_head=$(git rev-parse --verify HEAD) &&
 	test "$rev_head" = "$HASH4"
 '
@@ -116,27 +116,27 @@ test_expect_success 'no stdout output on error' '
 '
 
 test_expect_success 'use --default' '
-	git rev-parse --verify --default master &&
-	git rev-parse --verify --default master HEAD &&
-	git rev-parse --default master --verify &&
-	git rev-parse --default master --verify HEAD &&
-	git rev-parse --verify HEAD --default master &&
-	test_must_fail git rev-parse --verify foo --default master &&
+	git rev-parse --verify --default main &&
+	git rev-parse --verify --default main HEAD &&
+	git rev-parse --default main --verify &&
+	git rev-parse --default main --verify HEAD &&
+	git rev-parse --verify HEAD --default main &&
+	test_must_fail git rev-parse --verify foo --default main &&
 	test_must_fail git rev-parse --default HEAD --verify bar &&
 	test_must_fail git rev-parse --verify --default HEAD baz &&
 	test_must_fail git rev-parse --default foo --verify &&
 	test_must_fail git rev-parse --verify --default bar
 '
 
-test_expect_success 'master@{n} for various n' '
+test_expect_success 'main@{n} for various n' '
 	N=$(git reflog | wc -l) &&
 	Nm1=$(($N-1)) &&
 	Np1=$(($N+1)) &&
-	git rev-parse --verify master@{0} &&
-	git rev-parse --verify master@{1} &&
-	git rev-parse --verify master@{$Nm1} &&
-	test_must_fail git rev-parse --verify master@{$N} &&
-	test_must_fail git rev-parse --verify master@{$Np1}
+	git rev-parse --verify main@{0} &&
+	git rev-parse --verify main@{1} &&
+	git rev-parse --verify main@{$Nm1} &&
+	test_must_fail git rev-parse --verify main@{$N} &&
+	test_must_fail git rev-parse --verify main@{$Np1}
 '
 
 test_expect_success SYMLINKS 'ref resolution not confused by broken symlinks' '
t/t1505-rev-parse-last.sh +4 -4
index 4969edb314..a64cd4ce14 100755
@@ -20,12 +20,12 @@ test_expect_success 'setup' '
 	make_commit 3 &&
 	git checkout side &&
 	make_commit 4 &&
-	git merge master &&
-	git checkout master
+	git merge main &&
+	git checkout main
 
 '
 
-# 1 -- 2 -- 3 master
+# 1 -- 2 -- 3 main
 #  \         \
 #   \         \
 #    --- 4 --- 5 side
@@ -49,7 +49,7 @@ test_expect_success '@{-1}@{1} works' '
 '
 
 test_expect_success '@{-2} works' '
-	test_cmp_rev master @{-2}
+	test_cmp_rev main @{-2}
 '
 
 test_expect_success '@{-3} fails' '
t/t1506-rev-parse-diagnosis.sh +2 -2
index e2ae15a2cf..8b183f1de1 100755
@@ -137,10 +137,10 @@ test_expect_success 'incorrect file in :path and :N:path' '
 '
 
 test_expect_success 'invalid @{n} reference' '
-	test_must_fail git rev-parse master@{99999} >output 2>error &&
+	test_must_fail git rev-parse main@{99999} >output 2>error &&
 	test_must_be_empty output &&
 	test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error  &&
-	test_must_fail git rev-parse --verify master@{99999} >output 2>error &&
+	test_must_fail git rev-parse --verify main@{99999} >output 2>error &&
 	test_must_be_empty output &&
 	test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error
 '
t/t1507-rev-parse-upstream.sh +20 -20
index dfc0d96d8a..d49998ceb6 100755
@@ -10,20 +10,20 @@ test_expect_success 'setup' '
 	test_commit 1 &&
 	git checkout -b side &&
 	test_commit 2 &&
-	git checkout master &&
+	git checkout main &&
 	git clone . clone &&
 	test_commit 3 &&
 	(cd clone &&
 	 test_commit 4 &&
 	 git branch --track my-side origin/side &&
-	 git branch --track local-master master &&
+	 git branch --track local-main main &&
 	 git branch --track fun@ny origin/side &&
 	 git branch --track @funny origin/side &&
 	 git branch --track funny@ origin/side &&
-	 git remote add -t master master-only .. &&
-	 git fetch master-only &&
+	 git remote add -t main main-only .. &&
+	 git fetch main-only &&
 	 git branch bad-upstream &&
-	 git config branch.bad-upstream.remote master-only &&
+	 git config branch.bad-upstream.remote main-only &&
 	 git config branch.bad-upstream.merge refs/heads/side
 	)
 '
@@ -39,7 +39,7 @@ error_message () {
 }
 
 test_expect_success '@{upstream} resolves to correct full name' '
-	echo refs/remotes/origin/master >expect &&
+	echo refs/remotes/origin/main >expect &&
 	git -C clone rev-parse --symbolic-full-name @{upstream} >actual &&
 	test_cmp expect actual &&
 	git -C clone rev-parse --symbolic-full-name @{UPSTREAM} >actual &&
@@ -49,7 +49,7 @@ test_expect_success '@{upstream} resolves to correct full name' '
 '
 
 test_expect_success '@{u} resolves to correct full name' '
-	echo refs/remotes/origin/master >expect &&
+	echo refs/remotes/origin/main >expect &&
 	git -C clone rev-parse --symbolic-full-name @{u} >actual &&
 	test_cmp expect actual &&
 	git -C clone rev-parse --symbolic-full-name @{U} >actual &&
@@ -132,7 +132,7 @@ test_expect_success 'checkout -b new my-side@{u} forks from the same' '
 test_expect_success 'merge my-side@{u} records the correct name' '
 (
 	cd clone &&
-	git checkout master &&
+	git checkout main &&
 	test_might_fail git branch -D new &&
 	git branch -t new my-side@{u} &&
 	git merge -s ours new@{u} &&
@@ -143,24 +143,24 @@ test_expect_success 'merge my-side@{u} records the correct name' '
 '
 
 test_expect_success 'branch -d other@{u}' '
-	git checkout -t -b other master &&
+	git checkout -t -b other main &&
 	git branch -d @{u} &&
-	git for-each-ref refs/heads/master >actual &&
+	git for-each-ref refs/heads/main >actual &&
 	test_must_be_empty actual
 '
 
 test_expect_success 'checkout other@{u}' '
-	git branch -f master HEAD &&
-	git checkout -t -b another master &&
+	git branch -f main HEAD &&
+	git checkout -t -b another main &&
 	git checkout @{u} &&
 	git symbolic-ref HEAD >actual &&
-	echo refs/heads/master >expect &&
+	echo refs/heads/main >expect &&
 	test_cmp expect actual
 '
 
 test_expect_success 'branch@{u} works when tracking a local branch' '
-	echo refs/heads/master >expect &&
-	git -C clone rev-parse --symbolic-full-name local-master@{u} >actual &&
+	echo refs/heads/main >expect &&
+	git -C clone rev-parse --symbolic-full-name local-main@{u} >actual &&
 	test_cmp expect actual
 '
 
@@ -174,7 +174,7 @@ test_expect_success 'branch@{u} error message when no upstream' '
 
 test_expect_success '@{u} error message when no upstream' '
 	cat >expect <<-EOF &&
-	fatal: no upstream configured for branch ${SQ}master${SQ}
+	fatal: no upstream configured for branch ${SQ}main${SQ}
 	EOF
 	test_must_fail git rev-parse --verify @{u} 2>actual &&
 	test_i18ncmp expect actual
@@ -208,14 +208,14 @@ test_expect_success 'branch@{u} error message if upstream branch not fetched' '
 test_expect_success 'pull works when tracking a local branch' '
 (
 	cd clone &&
-	git checkout local-master &&
+	git checkout local-main &&
 	git pull
 )
 '
 
 # makes sense if the previous one succeeded
 test_expect_success '@{u} works when tracking a local branch' '
-	echo refs/heads/master >expect &&
+	echo refs/heads/main >expect &&
 	git -C clone rev-parse --symbolic-full-name @{u} >actual &&
 	test_cmp expect actual
 '
@@ -224,7 +224,7 @@ test_expect_success 'log -g other@{u}' '
 	commit=$(git rev-parse HEAD) &&
 	cat >expect <<-EOF &&
 	commit $commit
-	Reflog: master@{0} (C O Mitter <[email protected]>)
+	Reflog: main@{0} (C O Mitter <[email protected]>)
 	Reflog message: branch: Created from HEAD
 	Author: A U Thor <[email protected]>
 	Date:   Thu Apr 7 15:15:13 2005 -0700
@@ -239,7 +239,7 @@ test_expect_success 'log -g other@{u}@{now}' '
 	commit=$(git rev-parse HEAD) &&
 	cat >expect <<-EOF &&
 	commit $commit
-	Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <[email protected]>)
+	Reflog: main@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <[email protected]>)
 	Reflog message: branch: Created from HEAD
 	Author: A U Thor <[email protected]>
 	Date:   Thu Apr 7 15:15:13 2005 -0700
t/t1508-at-combinations.sh +5 -5
index 4a9964e9dc..bda6e7900c 100755
@@ -30,8 +30,8 @@ fail() {
 }
 
 test_expect_success 'setup' '
-	test_commit master-one &&
-	test_commit master-two &&
+	test_commit main-one &&
+	test_commit main-two &&
 	git checkout -b upstream-branch &&
 	test_commit upstream-one &&
 	test_commit upstream-two &&
@@ -47,7 +47,7 @@ test_expect_success 'setup' '
 	git checkout -b new-branch &&
 	test_commit new-one &&
 	test_commit new-two &&
-	git branch -u master old-branch &&
+	git branch -u main old-branch &&
 	git branch -u upstream-branch new-branch
 '
 
@@ -62,8 +62,8 @@ check "@{-1}@{1}" commit old-one
 check "@{u}" ref refs/heads/upstream-branch
 check "HEAD@{u}" ref refs/heads/upstream-branch
 check "@{u}@{1}" commit upstream-one
-check "@{-1}@{u}" ref refs/heads/master
-check "@{-1}@{u}@{1}" commit master-one
+check "@{-1}@{u}" ref refs/heads/main
+check "@{-1}@{u}@{1}" commit main-one
 check "@" commit new-two
 check "@@{u}" ref refs/heads/upstream-branch
 check "@@/at-test" ref refs/heads/@@/at-test
t/t1511-rev-parse-caret.sh +13 -13
index e0a49a651f..cc324bea52 100755
@@ -15,7 +15,7 @@ test_expect_success 'setup' '
 	git commit -m Initial &&
 	git tag -a -m commit commit-tag &&
 	git branch ref &&
-	git checkout master &&
+	git checkout main &&
 	echo modified >>a-blob &&
 	git add -u &&
 	git commit -m Modified &&
@@ -73,52 +73,52 @@ test_expect_success 'ref^{tag}' '
 '
 
 test_expect_success 'ref^{/.}' '
-	git rev-parse master >expected &&
-	git rev-parse master^{/.} >actual &&
+	git rev-parse main >expected &&
+	git rev-parse main^{/.} >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'ref^{/non-existent}' '
-	test_must_fail git rev-parse master^{/non-existent}
+	test_must_fail git rev-parse main^{/non-existent}
 '
 
 test_expect_success 'ref^{/Initial}' '
 	git rev-parse ref >expected &&
-	git rev-parse master^{/Initial} >actual &&
+	git rev-parse main^{/Initial} >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'ref^{/!Exp}' '
-	test_must_fail git rev-parse master^{/!Exp}
+	test_must_fail git rev-parse main^{/!Exp}
 '
 
 test_expect_success 'ref^{/!}' '
-	test_must_fail git rev-parse master^{/!}
+	test_must_fail git rev-parse main^{/!}
 '
 
 test_expect_success 'ref^{/!!Exp}' '
 	git rev-parse expref >expected &&
-	git rev-parse master^{/!!Exp} >actual &&
+	git rev-parse main^{/!!Exp} >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'ref^{/!-}' '
-	test_must_fail git rev-parse master^{/!-}
+	test_must_fail git rev-parse main^{/!-}
 '
 
 test_expect_success 'ref^{/!-.}' '
-	test_must_fail git rev-parse master^{/!-.}
+	test_must_fail git rev-parse main^{/!-.}
 '
 
 test_expect_success 'ref^{/!-non-existent}' '
-	git rev-parse master >expected &&
-	git rev-parse master^{/!-non-existent} >actual &&
+	git rev-parse main >expected &&
+	git rev-parse main^{/!-non-existent} >actual &&
 	test_cmp expected actual
 '
 
 test_expect_success 'ref^{/!-Changed}' '
 	git rev-parse expref >expected &&
-	git rev-parse master^{/!-Changed} >actual &&
+	git rev-parse main^{/!-Changed} >actual &&
 	test_cmp expected actual
 '
 
t/t1512-rev-parse-disambiguation.sh +1 -1
index 18fa6cf40d..6b4481d36b 100755
@@ -212,7 +212,7 @@ test_expect_success 'more history' '
 	side=$(git rev-parse HEAD) &&
 
 	# commit 000000000066
-	git checkout master &&
+	git checkout main &&
 
 	# If you use recursive, merge will fail and you will need to
 	# clean up a0blgqsjc as well.  If you use resolve, merge will
t/t1513-rev-parse-prefix.sh +2 -2
index 87ec3ae714..f77e59121c 100755
@@ -76,9 +76,9 @@ test_expect_success 'disambiguate path with valid prefix' '
 '
 
 test_expect_success 'file and refs with prefix' '
-	git rev-parse --prefix sub1/ master file1 >actual &&
+	git rev-parse --prefix sub1/ main file1 >actual &&
 	cat <<-EOF >expected &&
-	$(git rev-parse master)
+	$(git rev-parse main)
 	sub1/file1
 	EOF
 	test_cmp expected actual
t/t1514-rev-parse-push.sh +8 -8
index 788cc91e45..e85b222e99 100755
@@ -16,24 +16,24 @@ test_expect_success 'setup' '
 	git remote add other other.git &&
 	test_commit base &&
 	git push origin HEAD &&
-	git branch --set-upstream-to=origin/master master &&
-	git branch --track topic origin/master &&
+	git branch --set-upstream-to=origin/main main &&
+	git branch --track topic origin/main &&
 	git push origin topic &&
 	git push other topic
 '
 
 test_expect_success '@{push} with default=nothing' '
 	test_config push.default nothing &&
-	test_must_fail git rev-parse master@{push} &&
-	test_must_fail git rev-parse master@{PUSH} &&
-	test_must_fail git rev-parse master@{PuSH}
+	test_must_fail git rev-parse main@{push} &&
+	test_must_fail git rev-parse main@{PUSH} &&
+	test_must_fail git rev-parse main@{PuSH}
 '
 
 test_expect_success '@{push} with default=simple' '
 	test_config push.default simple &&
-	resolve master@{push} refs/remotes/origin/master &&
-	resolve master@{PUSH} refs/remotes/origin/master &&
-	resolve master@{pUSh} refs/remotes/origin/master
+	resolve main@{push} refs/remotes/origin/main &&
+	resolve main@{PUSH} refs/remotes/origin/main &&
+	resolve main@{pUSh} refs/remotes/origin/main
 '
 
 test_expect_success 'triangular @{push} fails with default=simple' '
t/t1700-split-index.sh +1 -1
index 12a5568844..f3309045fe 100755
@@ -496,7 +496,7 @@ test_expect_success 'do not refresh null base index' '
 		test_commit initial &&
 		git checkout -b side-branch &&
 		test_commit extra &&
-		git checkout master &&
+		git checkout main &&
 		git update-index --split-index &&
 		test_commit more &&
 		# must not write a new shareindex, or we wont catch the problem
t/test-lib.sh +7 -0
index a863ccee7e..126004e342 100644
@@ -256,6 +256,13 @@ case "$TRASH_DIRECTORY" in
  *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;;
 esac
 
+case "$TEST_NUMBER" in
+[01]*)
+	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+	;;
+esac
+
 # If --stress was passed, run this test repeatedly in several parallel loops.
 if test "$GIT_TEST_STRESS_STARTED" = "done"
 then
Signature · 1 line
gitgitgadget
#63 lore raw

PATCH v2 3/27 t2*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t2*.sh)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t2007-checkout-symlink.sh              | 10 ++--
 t/t2009-checkout-statinfo.sh             |  8 +--
 t/t2010-checkout-ambiguous.sh            |  4 +-
 t/t2011-checkout-invalid-head.sh         | 16 +++---
 t/t2012-checkout-last.sh                 | 48 ++++++++--------
 t/t2015-checkout-unborn.sh               |  2 +-
 t/t2017-checkout-orphan.sh               | 44 +++++++--------
 t/t2020-checkout-detach.sh               | 28 +++++-----
 t/t2022-checkout-paths.sh                | 22 ++++----
 t/t2023-checkout-m.sh                    | 10 ++--
 t/t2024-checkout-dwim.sh                 | 70 ++++++++++++------------
 t/t2027-checkout-track.sh                |  6 +-
 t/t2030-unresolve-info.sh                |  6 +-
 t/t2060-switch.sh                        | 30 +++++-----
 t/t2070-restore.sh                       |  4 +-
 t/t2106-update-index-assume-unchanged.sh |  2 +-
 t/t2400-worktree-add.sh                  | 66 +++++++++++-----------
 t/t2401-worktree-prune.sh                |  2 +-
 t/t2402-worktree-list.sh                 | 20 +++----
 t/t2405-worktree-submodule.sh            |  6 +-
 t/test-lib.sh                            |  2 +-
 21 files changed, 203 insertions(+), 203 deletions(-)
t/t2007-checkout-symlink.sh +5 -5
index fc9aad530e..d6468ad8f3 100755
@@ -12,14 +12,14 @@ test_expect_success setup '
 	echo hello >frotz/filfre &&
 	git add frotz/filfre &&
 	test_tick &&
-	git commit -m "master has file frotz/filfre" &&
+	git commit -m "main has file frotz/filfre" &&
 
 	git branch side &&
 
 	echo goodbye >nitfol &&
 	git add nitfol &&
 	test_tick &&
-	git commit -m "master adds file nitfol" &&
+	git commit -m "main adds file nitfol" &&
 
 	git checkout side &&
 
@@ -34,13 +34,13 @@ test_expect_success setup '
 
 test_expect_success 'switch from symlink to dir' '
 
-	git checkout master
+	git checkout main
 
 '
 
-test_expect_success 'Remove temporary directories & switch to master' '
+test_expect_success 'Remove temporary directories & switch to main' '
 	rm -fr frotz xyzzy nitfol &&
-	git checkout -f master
+	git checkout -f main
 '
 
 test_expect_success 'switch from dir to symlink' '
t/t2009-checkout-statinfo.sh +4 -4
index f3c2152087..91940f3c60 100755
@@ -21,13 +21,13 @@ test_expect_success 'branch switching' '
 	git reset --hard &&
 	test "$(git diff-files --raw)" = "" &&
 
-	git checkout master &&
+	git checkout main &&
 	test "$(git diff-files --raw)" = "" &&
 
 	git checkout side &&
 	test "$(git diff-files --raw)" = "" &&
 
-	git checkout master &&
+	git checkout main &&
 	test "$(git diff-files --raw)" = ""
 
 '
@@ -37,13 +37,13 @@ test_expect_success 'path checkout' '
 	git reset --hard &&
 	test "$(git diff-files --raw)" = "" &&
 
-	git checkout master world &&
+	git checkout main world &&
 	test "$(git diff-files --raw)" = "" &&
 
 	git checkout side world &&
 	test "$(git diff-files --raw)" = "" &&
 
-	git checkout master world &&
+	git checkout main world &&
 	test "$(git diff-files --raw)" = ""
 
 '
t/t2010-checkout-ambiguous.sh +2 -2
index 2e47fe01cf..64395479e8 100755
@@ -17,7 +17,7 @@ test_expect_success 'reference must be a tree' '
 '
 
 test_expect_success 'branch switching' '
-	test "refs/heads/master" = "$(git symbolic-ref HEAD)" &&
+	test "refs/heads/main" = "$(git symbolic-ref HEAD)" &&
 	git checkout world -- &&
 	test "refs/heads/world" = "$(git symbolic-ref HEAD)"
 '
@@ -57,7 +57,7 @@ test_expect_success 'disambiguate checking out from a tree-ish' '
 '
 
 test_expect_success 'accurate error message with more than one ref' '
-	test_must_fail git checkout HEAD master -- 2>actual &&
+	test_must_fail git checkout HEAD main -- 2>actual &&
 	test_i18ngrep 2 actual &&
 	test_i18ngrep "one reference expected, 2 given" actual
 '
t/t2011-checkout-invalid-head.sh +8 -8
index 0e8d56aa76..d92f8582ea 100755
@@ -11,12 +11,12 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'checkout should not start branch from a tree' '
-	test_must_fail git checkout -b newbranch master^{tree}
+	test_must_fail git checkout -b newbranch main^{tree}
 '
 
-test_expect_success 'checkout master from invalid HEAD' '
+test_expect_success 'checkout main from invalid HEAD' '
 	echo $ZERO_OID >.git/HEAD &&
-	git checkout master --
+	git checkout main --
 '
 
 test_expect_success 'checkout notices failure to lock HEAD' '
@@ -26,7 +26,7 @@ test_expect_success 'checkout notices failure to lock HEAD' '
 '
 
 test_expect_success 'create ref directory/file conflict scenario' '
-	git update-ref refs/heads/outer/inner master &&
+	git update-ref refs/heads/outer/inner main &&
 
 	# do not rely on symbolic-ref to get a known state,
 	# as it may use the same code we are testing
@@ -37,12 +37,12 @@ test_expect_success 'create ref directory/file conflict scenario' '
 
 test_expect_success 'checkout away from d/f HEAD (unpacked, to branch)' '
 	reset_to_df &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'checkout away from d/f HEAD (unpacked, to detached)' '
 	reset_to_df &&
-	git checkout --detach master
+	git checkout --detach main
 '
 
 test_expect_success 'pack refs' '
@@ -51,11 +51,11 @@ test_expect_success 'pack refs' '
 
 test_expect_success 'checkout away from d/f HEAD (packed, to branch)' '
 	reset_to_df &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'checkout away from d/f HEAD (packed, to detached)' '
 	reset_to_df &&
-	git checkout --detach master
+	git checkout --detach main
 '
 test_done
t/t2012-checkout-last.sh +24 -24

87 lines not on this page · raw message

t/t2015-checkout-unborn.sh +1 -1
index 37bdcedcc9..2b3e6dc27e 100755
@@ -11,7 +11,7 @@ test_expect_success 'setup' '
 	 git add file &&
 	 git commit -m base
 	) &&
-	git fetch parent master:origin
+	git fetch parent main:origin
 '
 
 test_expect_success 'checkout from unborn preserves untracked files' '
t/t2017-checkout-orphan.sh +22 -22

110 lines not on this page · raw message

t/t2020-checkout-detach.sh +14 -14
index b748db9946..25885c3065 100755
@@ -22,7 +22,7 @@ check_no_orphan_warning() {
 }
 
 reset () {
-	git checkout master &&
+	git checkout main &&
 	check_not_detached
 }
 
@@ -85,7 +85,7 @@ test_expect_success 'checkout --detach errors out for non-commit' '
 
 test_expect_success 'checkout --detach errors out for extra argument' '
 	reset &&
-	git checkout master &&
+	git checkout main &&
 	test_must_fail git checkout --detach tag one.t &&
 	check_not_detached
 '
@@ -113,7 +113,7 @@ test_expect_success 'checkout warns on orphan commits' '
 	echo new content >orphan &&
 	git commit -a -m orphan2 &&
 	orphan2=$(git rev-parse HEAD) &&
-	git checkout master 2>stderr
+	git checkout main 2>stderr
 '
 
 test_expect_success 'checkout warns on orphan commits: output' '
@@ -132,7 +132,7 @@ test_expect_success 'checkout warns orphaning 1 of 2 commits: output' '
 test_expect_success 'checkout does not warn leaving ref tip' '
 	reset &&
 	git checkout --detach two &&
-	git checkout master 2>stderr
+	git checkout main 2>stderr
 '
 
 test_expect_success 'checkout does not warn leaving ref tip' '
@@ -142,7 +142,7 @@ test_expect_success 'checkout does not warn leaving ref tip' '
 test_expect_success 'checkout does not warn leaving reachable commit' '
 	reset &&
 	git checkout --detach HEAD^ &&
-	git checkout master 2>stderr
+	git checkout main 2>stderr
 '
 
 test_expect_success 'checkout does not warn leaving reachable commit' '
@@ -150,14 +150,14 @@ test_expect_success 'checkout does not warn leaving reachable commit' '
 '
 
 cat >expect <<'EOF'
-Your branch is behind 'master' by 1 commit, and can be fast-forwarded.
+Your branch is behind 'main' by 1 commit, and can be fast-forwarded.
   (use "git pull" to update your local branch)
 EOF
 test_expect_success 'tracking count is accurate after orphan check' '
 	reset &&
-	git branch child master^ &&
+	git branch child main^ &&
 	git config branch.child.remote . &&
-	git config branch.child.merge refs/heads/master &&
+	git config branch.child.merge refs/heads/main &&
 	git checkout child^ &&
 	git checkout child >stdout &&
 	test_i18ncmp expect stdout
@@ -189,9 +189,9 @@ test_expect_success 'no advice given for explicit detached head state' '
 # Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (new format)
 test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not asked to' "
 
-	commit=$(git rev-parse --short=12 master^) &&
-	commit2=$(git rev-parse --short=12 master~2) &&
-	commit3=$(git rev-parse --short=12 master~3) &&
+	commit=$(git rev-parse --short=12 main^) &&
+	commit2=$(git rev-parse --short=12 main~2) &&
+	commit3=$(git rev-parse --short=12 main~3) &&
 
 	# The first detach operation is more chatty than the following ones.
 	cat >1st_detach <<-EOF &&
@@ -271,9 +271,9 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as
 # Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (old format)
 test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked to' "
 
-	commit=$(git rev-parse --short=12 master^) &&
-	commit2=$(git rev-parse --short=12 master~2) &&
-	commit3=$(git rev-parse --short=12 master~3) &&
+	commit=$(git rev-parse --short=12 main^) &&
+	commit2=$(git rev-parse --short=12 main~2) &&
+	commit3=$(git rev-parse --short=12 main~3) &&
 
 	# The first detach operation is more chatty than the following ones.
 	cat >1st_detach <<-EOF &&
t/t2022-checkout-paths.sh +11 -11
index 6844afafc0..4174620cf4 100755
@@ -5,15 +5,15 @@ test_description='checkout $tree -- $paths'
 
 test_expect_success setup '
 	mkdir dir &&
-	>dir/master &&
+	>dir/main &&
 	echo common >dir/common &&
-	git add dir/master dir/common &&
-	test_tick && git commit -m "master has dir/master" &&
+	git add dir/main dir/common &&
+	test_tick && git commit -m "main has dir/main" &&
 	git checkout -b next &&
-	git mv dir/master dir/next0 &&
+	git mv dir/main dir/next0 &&
 	echo next >dir/next1 &&
 	git add dir &&
-	test_tick && git commit -m "next has dir/next but not dir/master"
+	test_tick && git commit -m "next has dir/next but not dir/main"
 '
 
 test_expect_success 'checking out paths out of a tree does not clobber unrelated paths' '
@@ -26,11 +26,11 @@ test_expect_success 'checking out paths out of a tree does not clobber unrelated
 	echo untracked >expect.next2 &&
 	cat expect.next2 >dir/next2 &&
 
-	git checkout master dir &&
+	git checkout main dir &&
 
 	test_cmp expect.common dir/common &&
-	test_path_is_file dir/master &&
-	git diff --exit-code master dir/master &&
+	test_path_is_file dir/main &&
+	git diff --exit-code main dir/main &&
 
 	test_path_is_missing dir/next0 &&
 	test_cmp expect.next1 dir/next1 &&
@@ -52,11 +52,11 @@ test_expect_success 'do not touch unmerged entries matching $path but not in $tr
 	EOF
 	git update-index --index-info <expect.next0 &&
 
-	git checkout master dir &&
+	git checkout main dir &&
 
 	test_cmp expect.common dir/common &&
-	test_path_is_file dir/master &&
-	git diff --exit-code master dir/master &&
+	test_path_is_file dir/main &&
+	git diff --exit-code main dir/main &&
 	git ls-files -s dir/next0 >actual.next0 &&
 	test_cmp expect.next0 actual.next0
 '
t/t2023-checkout-m.sh +5 -5
index fca3f85824..ddcfcc3e9b 100755
@@ -10,15 +10,15 @@ test_expect_success setup '
 	test_tick &&
 	test_commit both.txt both.txt initial &&
 	git branch topic &&
-	test_commit modified_in_master both.txt in_master &&
-	test_commit added_in_master each.txt in_master &&
+	test_commit modified_in_main both.txt in_main &&
+	test_commit added_in_main each.txt in_main &&
 	git checkout topic &&
 	test_commit modified_in_topic both.txt in_topic &&
 	test_commit added_in_topic each.txt in_topic
 '
 
-test_expect_success 'git merge master' '
-    test_must_fail git merge master
+test_expect_success 'git merge main' '
+    test_must_fail git merge main
 '
 
 clean_branchnames () {
@@ -61,7 +61,7 @@ test_expect_success 'force checkout a conflict file creates stage zero entry' '
 		git checkout topic &&
 		echo c >a &&
 		C_OBJ=$(git hash-object a) &&
-		git checkout -m master &&
+		git checkout -m main &&
 		test_cmp_rev :1:a $A_OBJ &&
 		test_cmp_rev :2:a $B_OBJ &&
 		test_cmp_rev :3:a $C_OBJ &&
t/t2024-checkout-dwim.sh +35 -35

238 lines not on this page · raw message

t/t2027-checkout-track.sh +3 -3
index bcba1bf90c..bc46c5a68e 100755
@@ -10,14 +10,14 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'checkout --track -b creates a new tracking branch' '
-	git checkout --track -b branch1 master &&
+	git checkout --track -b branch1 main &&
 	test $(git rev-parse --abbrev-ref HEAD) = branch1 &&
 	test $(git config --get branch.branch1.remote) = . &&
-	test $(git config --get branch.branch1.merge) = refs/heads/master
+	test $(git config --get branch.branch1.merge) = refs/heads/main
 '
 
 test_expect_success 'checkout --track -b rejects an extra path argument' '
-	test_must_fail git checkout --track -b branch2 master one.t 2>err &&
+	test_must_fail git checkout --track -b branch2 main one.t 2>err &&
 	test_i18ngrep "cannot be used with updating paths" err
 '
 
t/t2030-unresolve-info.sh +3 -3
index 309199bca2..3cdd73c172 100755
@@ -59,7 +59,7 @@ test_expect_success setup '
 	test_commit fourth fi/le fourth &&
 	git checkout add-add &&
 	test_commit fifth add-differently &&
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'add records switch clears' '
@@ -183,8 +183,8 @@ test_expect_success 'rerere forget (binary)' '
 '
 
 test_expect_success 'rerere forget (add-add conflict)' '
-	git checkout -f master &&
-	echo master >add-differently &&
+	git checkout -f main &&
+	echo main >add-differently &&
 	git add add-differently &&
 	git commit -m "add differently" &&
 	test_must_fail git merge fifth &&
t/t2060-switch.sh +15 -15
index 68c9101b02..11f85f8861 100755
@@ -23,41 +23,41 @@ test_expect_success 'switch branch' '
 '
 
 test_expect_success 'switch and detach' '
-	test_when_finished git switch master &&
-	test_must_fail git switch master^{commit} &&
-	git switch --detach master^{commit} &&
+	test_when_finished git switch main &&
+	test_must_fail git switch main^{commit} &&
+	git switch --detach main^{commit} &&
 	test_must_fail git symbolic-ref HEAD
 '
 
 test_expect_success 'switch and detach current branch' '
-	test_when_finished git switch master &&
-	git switch master &&
+	test_when_finished git switch main &&
+	git switch main &&
 	git switch --detach &&
 	test_must_fail git symbolic-ref HEAD
 '
 
 test_expect_success 'switch and create branch' '
-	test_when_finished git switch master &&
-	git switch -c temp master^ &&
-	test_cmp_rev master^ refs/heads/temp &&
+	test_when_finished git switch main &&
+	git switch -c temp main^ &&
+	test_cmp_rev main^ refs/heads/temp &&
 	echo refs/heads/temp >expected-branch &&
 	git symbolic-ref HEAD >actual-branch &&
 	test_cmp expected-branch actual-branch
 '
 
 test_expect_success 'force create branch from HEAD' '
-	test_when_finished git switch master &&
-	git switch --detach master &&
+	test_when_finished git switch main &&
+	git switch --detach main &&
 	test_must_fail git switch -c temp &&
 	git switch -C temp &&
-	test_cmp_rev master refs/heads/temp &&
+	test_cmp_rev main refs/heads/temp &&
 	echo refs/heads/temp >expected-branch &&
 	git symbolic-ref HEAD >actual-branch &&
 	test_cmp expected-branch actual-branch
 '
 
 test_expect_success 'new orphan branch from empty' '
-	test_when_finished git switch master &&
+	test_when_finished git switch main &&
 	test_must_fail git switch --orphan new-orphan HEAD &&
 	git switch --orphan new-orphan &&
 	test_commit orphan &&
@@ -69,7 +69,7 @@ test_expect_success 'new orphan branch from empty' '
 '
 
 test_expect_success 'orphan branch works with --discard-changes' '
-	test_when_finished git switch master &&
+	test_when_finished git switch main &&
 	echo foo >foo.txt &&
 	git switch --discard-changes --orphan new-orphan2 &&
 	git ls-files >tracked-files &&
@@ -77,7 +77,7 @@ test_expect_success 'orphan branch works with --discard-changes' '
 '
 
 test_expect_success 'switching ignores file of same branch name' '
-	test_when_finished git switch master &&
+	test_when_finished git switch main &&
 	: >first-branch &&
 	git switch first-branch &&
 	echo refs/heads/first-branch >expected &&
@@ -86,7 +86,7 @@ test_expect_success 'switching ignores file of same branch name' '
 '
 
 test_expect_success 'guess and create branch' '
-	test_when_finished git switch master &&
+	test_when_finished git switch main &&
 	test_must_fail git switch --no-guess foo &&
 	test_config checkout.guess false &&
 	test_must_fail git switch foo &&
t/t2070-restore.sh +2 -2
index 89e5a142c9..46e27212d6 100755
@@ -15,7 +15,7 @@ test_expect_success 'setup' '
 	echo ignored >ignored &&
 	echo /ignored >.gitignore &&
 	git add one two .gitignore &&
-	git update-ref refs/heads/one master
+	git update-ref refs/heads/one main
 '
 
 test_expect_success 'restore without pathspec is not ok' '
@@ -91,7 +91,7 @@ test_expect_success 'restore --ignore-unmerged ignores unmerged entries' '
 		git switch -c first &&
 		echo first >unmerged &&
 		git commit -am first &&
-		git switch -c second master &&
+		git switch -c second main &&
 		echo second >unmerged &&
 		git commit -am second &&
 		test_must_fail git merge first &&
t/t2106-update-index-assume-unchanged.sh +1 -1
index 99d858c6b7..2b923824c9 100755
@@ -19,6 +19,6 @@ test_expect_success 'do not switch branches with dirty file' \
 	 git checkout other &&
 	 echo dirt >file &&
 	 git update-index --assume-unchanged file &&
-	 test_must_fail git checkout master'
+	 test_must_fail git checkout main'
 
 test_done
t/t2400-worktree-add.sh +33 -33

218 lines not on this page · raw message

t/t2401-worktree-prune.sh +1 -1
index a6ce7f590b..7a2ff04f44 100755
@@ -87,7 +87,7 @@ test_expect_success 'not prune recent checkouts' '
 
 test_expect_success 'not prune proper checkouts' '
 	test_when_finished rm -r .git/worktrees &&
-	git worktree add --detach "$PWD/nop" master &&
+	git worktree add --detach "$PWD/nop" main &&
 	git worktree prune &&
 	test -d .git/worktrees/nop
 '
t/t2402-worktree-list.sh +10 -10
index 795ddca2e4..03603d0dd0 100755
@@ -21,7 +21,7 @@ test_expect_success 'rev-parse --git-common-dir on main worktree' '
 test_expect_success 'rev-parse --git-path objects linked worktree' '
 	echo "$(git rev-parse --show-toplevel)/.git/objects" >expect &&
 	test_when_finished "rm -rf linked-tree actual expect && git worktree prune" &&
-	git worktree add --detach linked-tree master &&
+	git worktree add --detach linked-tree main &&
 	git -C linked-tree rev-parse --git-path objects >actual &&
 	test_cmp expect actual
 '
@@ -29,7 +29,7 @@ test_expect_success 'rev-parse --git-path objects linked worktree' '
 test_expect_success '"list" all worktrees from main' '
 	echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect &&
 	test_when_finished "rm -rf here out actual expect && git worktree prune" &&
-	git worktree add --detach here master &&
+	git worktree add --detach here main &&
 	echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect &&
 	git worktree list >out &&
 	sed "s/  */ /g" <out >actual &&
@@ -39,7 +39,7 @@ test_expect_success '"list" all worktrees from main' '
 test_expect_success '"list" all worktrees from linked' '
 	echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect &&
 	test_when_finished "rm -rf here out actual expect && git worktree prune" &&
-	git worktree add --detach here master &&
+	git worktree add --detach here main &&
 	echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect &&
 	git -C here worktree list >out &&
 	sed "s/  */ /g" <out >actual &&
@@ -52,7 +52,7 @@ test_expect_success '"list" all worktrees --porcelain' '
 	echo "branch $(git symbolic-ref HEAD)" >>expect &&
 	echo >>expect &&
 	test_when_finished "rm -rf here actual expect && git worktree prune" &&
-	git worktree add --detach here master &&
+	git worktree add --detach here main &&
 	echo "worktree $(git -C here rev-parse --show-toplevel)" >>expect &&
 	echo "HEAD $(git rev-parse HEAD)" >>expect &&
 	echo "detached" >>expect &&
@@ -63,8 +63,8 @@ test_expect_success '"list" all worktrees --porcelain' '
 
 test_expect_success '"list" all worktrees with locked annotation' '
 	test_when_finished "rm -rf locked unlocked out && git worktree prune" &&
-	git worktree add --detach locked master &&
-	git worktree add --detach unlocked master &&
+	git worktree add --detach locked main &&
+	git worktree add --detach unlocked main &&
 	git worktree lock locked &&
 	git worktree list >out &&
 	grep "/locked  *[0-9a-f].* locked$" out &&
@@ -76,13 +76,13 @@ test_expect_success 'bare repo setup' '
 	echo "data" >file1 &&
 	git add file1 &&
 	git commit -m"File1: add data" &&
-	git push bare1 master &&
+	git push bare1 main &&
 	git reset --hard HEAD^
 '
 
 test_expect_success '"list" all worktrees from bare main' '
 	test_when_finished "rm -rf there out actual expect && git -C bare1 worktree prune" &&
-	git -C bare1 worktree add --detach ../there master &&
+	git -C bare1 worktree add --detach ../there main &&
 	echo "$(pwd)/bare1 (bare)" >expect &&
 	echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect &&
 	git -C bare1 worktree list >out &&
@@ -92,7 +92,7 @@ test_expect_success '"list" all worktrees from bare main' '
 
 test_expect_success '"list" all worktrees --porcelain from bare main' '
 	test_when_finished "rm -rf there actual expect && git -C bare1 worktree prune" &&
-	git -C bare1 worktree add --detach ../there master &&
+	git -C bare1 worktree add --detach ../there main &&
 	echo "worktree $(pwd)/bare1" >expect &&
 	echo "bare" >>expect &&
 	echo >>expect &&
@@ -106,7 +106,7 @@ test_expect_success '"list" all worktrees --porcelain from bare main' '
 
 test_expect_success '"list" all worktrees from linked with a bare main' '
 	test_when_finished "rm -rf there out actual expect && git -C bare1 worktree prune" &&
-	git -C bare1 worktree add --detach ../there master &&
+	git -C bare1 worktree add --detach ../there main &&
 	echo "$(pwd)/bare1 (bare)" >expect &&
 	echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect &&
 	git -C there worktree list >out &&
t/t2405-worktree-submodule.sh +3 -3
index e1b2bfd87e..ccc47fae97 100755
@@ -31,7 +31,7 @@ test_expect_success 'add superproject worktree' '
 '
 
 test_expect_failure 'submodule is checked out just after worktree add' '
-	git -C worktree diff --submodule master"^!" >out &&
+	git -C worktree diff --submodule main"^!" >out &&
 	grep "file1 updated" out
 '
 
@@ -41,7 +41,7 @@ test_expect_success 'add superproject worktree and initialize submodules' '
 '
 
 test_expect_success 'submodule is checked out just after submodule update in linked worktree' '
-	git -C worktree-submodule-update diff --submodule master"^!" >out &&
+	git -C worktree-submodule-update diff --submodule main"^!" >out &&
 	grep "file1 updated" out
 '
 
@@ -51,7 +51,7 @@ test_expect_success 'add superproject worktree and manually add submodule worktr
 '
 
 test_expect_success 'submodule is checked out after manually adding submodule worktree' '
-	git -C linked_submodule diff --submodule master"^!" >out &&
+	git -C linked_submodule diff --submodule main"^!" >out &&
 	grep "file1 updated" out
 '
 
t/test-lib.sh +1 -1
index 126004e342..3bb6675390 100644
@@ -257,7 +257,7 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-[01]*)
+[0-2]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#65 lore raw

PATCH v2 5/27 t3416: preemptively adjust alignment in a comment

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

We are about to adjust t3416 for the new default branch name main. This name is two characters shorter and therefore needs two spaces more padding to align correctly.

Adjusting the alignment before the big search-and-replace makes it easier to verify that the final result does not leave any misaligned lines behind.

---
 t/t3416-rebase-onto-threedots.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
t/t3416-rebase-onto-threedots.sh +1 -1
index 9c2548423b..1f37adf56b 100755
@@ -12,7 +12,7 @@ test_description='git rebase --onto A...B'
 #
 #	    F---G topic                             G'
 #	   /                                       /
-# A---B---C---D---E master      -->       A---B---C---D---E
+# A---B---C---D---E master        -->       A---B---C---D---E
 #      \   \ /
 #	\   x
 #	 \ / \
Signature · 1 line
gitgitgadget
#64 lore raw

PATCH v2 4/27 t3[0-3]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t3[0-3]*.sh t3206/*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t3040-subprojects-basic.sh          |   2 +-
 t/t3200-branch.sh                     | 242 +++++++++++++-------------
 t/t3201-branch-contains.sh            |  80 ++++-----
 t/t3202-show-branch-octopus.sh        |   2 +-
 t/t3203-branch-output.sh              |  38 ++--
 t/t3204-branch-name-interpretation.sh |   6 +-
 t/t3205-branch-color.sh               |   6 +-
 t/t3206-range-diff.sh                 |  40 ++---
 t/t3206/history.export                |   2 +-
 t/t3210-pack-refs.sh                  |   4 +-
 t/t3211-peel-ref.sh                   |   4 +-
 t/t3301-notes.sh                      |   6 +-
 t/t3302-notes-index-expensive.sh      |   2 +-
 t/t3303-notes-subtrees.sh             |   8 +-
 t/t3304-notes-mixed.sh                |   8 +-
 t/t3308-notes-merge.sh                |   2 +-
 t/t3320-notes-merge-worktrees.sh      |   4 +-
 t/test-lib.sh                         |   2 +-
 18 files changed, 229 insertions(+), 229 deletions(-)
t/t3040-subprojects-basic.sh +1 -1
index b81eb5fd6f..f3ea8dcf58 100755
@@ -80,6 +80,6 @@ test_expect_success 'checkout in superproject' '
 '
 
 # just interesting what happened...
-# git diff --name-status -M save master
+# git diff --name-status -M save main
 
 test_done
t/t3200-branch.sh +121 -121

619 lines not on this page · raw message

t/t3201-branch-contains.sh +40 -40

223 lines not on this page · raw message

t/t3202-show-branch-octopus.sh +1 -1
index 6adf47869c..97551016ad 100755
@@ -15,7 +15,7 @@ test_expect_success 'setup' '
 
 	for i in $numbers
 	do
-		git checkout -b branch$i master &&
+		git checkout -b branch$i main &&
 		> file$i &&
 		git add file$i &&
 		test_tick &&
t/t3203-branch-output.sh +19 -19
index d65586541d..727c9d9caa 100755
@@ -26,7 +26,7 @@ test_expect_success 'make remote branches' '
 cat >expect <<'EOF'
   branch-one
   branch-two
-* master
+* main
 EOF
 test_expect_success 'git branch shows local branches' '
 	git branch >actual &&
@@ -60,7 +60,7 @@ test_expect_success 'git branch -r shows remote branches' '
 cat >expect <<'EOF'
   branch-one
   branch-two
-* master
+* main
   remotes/origin/HEAD -> origin/branch-one
   remotes/origin/branch-one
   remotes/origin/branch-two
@@ -152,7 +152,7 @@ test_expect_success 'git branch shows detached HEAD properly' '
 * (HEAD detached at $(git rev-parse --short HEAD^0))
   branch-one
   branch-two
-  master
+  main
 EOF
 	git checkout HEAD^0 &&
 	git branch >actual &&
@@ -160,12 +160,12 @@ EOF
 '
 
 test_expect_success 'git branch shows detached HEAD properly after checkout --detach' '
-	git checkout master &&
+	git checkout main &&
 	cat >expect <<EOF &&
 * (HEAD detached at $(git rev-parse --short HEAD^0))
   branch-one
   branch-two
-  master
+  main
 EOF
 	git checkout --detach &&
 	git branch >actual &&
@@ -177,7 +177,7 @@ test_expect_success 'git branch shows detached HEAD properly after moving' '
 * (HEAD detached from $(git rev-parse --short HEAD))
   branch-one
   branch-two
-  master
+  main
 EOF
 	git reset --hard HEAD^1 &&
 	git branch >actual &&
@@ -189,9 +189,9 @@ test_expect_success 'git branch shows detached HEAD properly from tag' '
 * (HEAD detached at fromtag)
   branch-one
   branch-two
-  master
+  main
 EOF
-	git tag fromtag master &&
+	git tag fromtag main &&
 	git checkout fromtag &&
 	git branch >actual &&
 	test_i18ncmp expect actual
@@ -202,7 +202,7 @@ test_expect_success 'git branch shows detached HEAD properly after moving from t
 * (HEAD detached from fromtag)
   branch-one
   branch-two
-  master
+  main
 EOF
 	git reset --hard HEAD^1 &&
 	git branch >actual &&
@@ -214,7 +214,7 @@ test_expect_success 'git branch `--sort` option' '
 	* (HEAD detached from fromtag)
 	  branch-two
 	  branch-one
-	  master
+	  main
 	EOF
 	git branch --sort=objectsize >actual &&
 	test_i18ncmp expect actual
@@ -223,7 +223,7 @@ test_expect_success 'git branch `--sort` option' '
 test_expect_success 'git branch --points-at option' '
 	cat >expect <<-\EOF &&
 	  branch-one
-	  master
+	  main
 	EOF
 	git branch --points-at=branch-one >actual &&
 	test_cmp expect actual
@@ -260,14 +260,14 @@ test_expect_success 'sort branches, ignore case' '
 		cat >expected <<-\EOF &&
 		BRANCH-two
 		branch-one
-		master
+		main
 		EOF
 		test_cmp expected actual &&
 		git branch --list -i | awk "{print \$NF}" >actual &&
 		cat >expected <<-\EOF &&
 		branch-one
 		BRANCH-two
-		master
+		main
 		EOF
 		test_cmp expected actual
 	)
@@ -279,7 +279,7 @@ test_expect_success 'git branch --format option' '
 	Refname is refs/heads/ambiguous
 	Refname is refs/heads/branch-one
 	Refname is refs/heads/branch-two
-	Refname is refs/heads/master
+	Refname is refs/heads/main
 	Refname is refs/heads/ref-to-branch
 	Refname is refs/heads/ref-to-remote
 	EOF
@@ -293,7 +293,7 @@ test_expect_success 'worktree colors correct' '
 	  ambiguous<RESET>
 	  branch-one<RESET>
 	+ <CYAN>branch-two<RESET>
-	  master<RESET>
+	  main<RESET>
 	  ref-to-branch<RESET> -> branch-one
 	  ref-to-remote<RESET> -> origin/branch-one
 	EOF
@@ -306,9 +306,9 @@ test_expect_success 'worktree colors correct' '
 '
 
 test_expect_success "set up color tests" '
-	echo "<RED>master<RESET>" >expect.color &&
-	echo "master" >expect.bare &&
-	color_args="--format=%(color:red)%(refname:short) --list master"
+	echo "<RED>main<RESET>" >expect.color &&
+	echo "main" >expect.bare &&
+	color_args="--format=%(color:red)%(refname:short) --list main"
 '
 
 test_expect_success '%(color) omitted without tty' '
@@ -331,7 +331,7 @@ test_expect_success '--color overrides auto-color' '
 
 test_expect_success PREPARE_FOR_MAIN_BRANCH 'verbose output lists worktree path' '
 	one=$(git rev-parse --short HEAD) &&
-	two=$(git rev-parse --short master) &&
+	two=$(git rev-parse --short main) &&
 	cat >expect <<-EOF &&
 	* (HEAD detached from fromtag) $one one
 	  ambiguous                    $one one
t/t3204-branch-name-interpretation.sh +3 -3
index 698d9cc4f3..e527e0b0c9 100755
@@ -28,7 +28,7 @@ test_expect_success 'update branch via @{-1}' '
 	git branch previous one &&
 
 	git checkout previous &&
-	git checkout master &&
+	git checkout main &&
 
 	git branch -f @{-1} two &&
 	expect_branch previous two
@@ -58,7 +58,7 @@ test_expect_success 'delete branch via @{-1}' '
 	git branch previous-del &&
 
 	git checkout previous-del &&
-	git checkout master &&
+	git checkout main &&
 
 	git branch -D @{-1} &&
 	expect_deleted previous-del
@@ -98,7 +98,7 @@ test_expect_success 'disallow deleting remote branch via @{-1}' '
 	git update-ref refs/remotes/origin/previous one &&
 
 	git checkout -b origin/previous two &&
-	git checkout master &&
+	git checkout main &&
 
 	test_must_fail git branch -r -D @{-1} &&
 	expect_branch refs/remotes/origin/previous one &&
t/t3205-branch-color.sh +3 -3
index 289625c464..9f2fb785d2 100755
@@ -5,7 +5,7 @@ test_description='basic branch output coloring'
 
 test_expect_success 'set up some sample branches' '
 	test_commit foo &&
-	git update-ref refs/remotes/origin/master HEAD &&
+	git update-ref refs/remotes/origin/main HEAD &&
 	git update-ref refs/heads/other HEAD
 '
 
@@ -19,9 +19,9 @@ test_expect_success 'set up some color config' '
 
 test_expect_success 'regular output shows colors' '
 	cat >expect <<-\EOF &&
-	* <CYAN>master<RESET>
+	* <CYAN>main<RESET>
 	  <BLUE>other<RESET>
-	  <YELLOW>remotes/origin/master<RESET>
+	  <YELLOW>remotes/origin/main<RESET>
 	EOF
 	git branch --color -a >actual.raw &&
 	test_decode_color <actual.raw >actual &&
t/t3206-range-diff.sh +20 -20
index 6eb344be03..2813a362c7 100755
@@ -127,7 +127,7 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'simple A..B A..C (unmodified)' '
-	git range-diff --no-color master..topic master..unmodified \
+	git range-diff --no-color main..topic main..unmodified \
 		>actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid u1) s/5/A/
@@ -145,13 +145,13 @@ test_expect_success 'simple B...C (unmodified)' '
 '
 
 test_expect_success 'simple A B C (unmodified)' '
-	git range-diff --no-color master topic unmodified >actual &&
+	git range-diff --no-color main topic unmodified >actual &&
 	# same "expect" as above
 	test_cmp expect actual
 '
 
 test_expect_success 'trivial reordering' '
-	git range-diff --no-color master topic reordered >actual &&
+	git range-diff --no-color main topic reordered >actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid r1) s/5/A/
 	3:  $(test_oid t3) = 2:  $(test_oid r2) s/11/B/
@@ -162,7 +162,7 @@ test_expect_success 'trivial reordering' '
 '
 
 test_expect_success 'removed a commit' '
-	git range-diff --no-color master topic removed >actual &&
+	git range-diff --no-color main topic removed >actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid d1) s/5/A/
 	2:  $(test_oid t2) < -:  $(test_oid __) s/4/A/
@@ -173,7 +173,7 @@ test_expect_success 'removed a commit' '
 '
 
 test_expect_success 'added a commit' '
-	git range-diff --no-color master topic added >actual &&
+	git range-diff --no-color main topic added >actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid a1) s/5/A/
 	2:  $(test_oid t2) = 2:  $(test_oid a2) s/4/A/
@@ -185,7 +185,7 @@ test_expect_success 'added a commit' '
 '
 
 test_expect_success 'new base, A B C' '
-	git range-diff --no-color master topic rebased >actual &&
+	git range-diff --no-color main topic rebased >actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid b1) s/5/A/
 	2:  $(test_oid t2) = 2:  $(test_oid b2) s/4/A/
@@ -196,7 +196,7 @@ test_expect_success 'new base, A B C' '
 '
 
 test_expect_success 'new base, B...C' '
-	# this syntax includes the commits from master!
+	# this syntax includes the commits from main!
 	git range-diff --no-color topic...rebased >actual &&
 	cat >expect <<-EOF &&
 	-:  $(test_oid __) > 1:  $(test_oid b5) unrelated
@@ -420,7 +420,7 @@ test_expect_success 'file added and later removed' '
 
 test_expect_success 'no commits on one side' '
 	git commit --amend -m "new message" &&
-	git range-diff master HEAD@{1} HEAD
+	git range-diff main HEAD@{1} HEAD
 '
 
 test_expect_success 'changed message' '
@@ -482,11 +482,11 @@ test_expect_success 'dual-coloring' '
 	test_cmp expect actual
 '
 
-for prev in topic master..topic
+for prev in topic main..topic
 do
 	test_expect_success "format-patch --range-diff=$prev" '
 		git format-patch --cover-letter --range-diff=$prev \
-			master..unmodified >actual &&
+			main..unmodified >actual &&
 		test_when_finished "rm 000?-*" &&
 		test_line_count = 5 actual &&
 		test_i18ngrep "^Range-diff:$" 0000-* &&
@@ -511,19 +511,19 @@ test_expect_success 'range-diff overrides diff.noprefix internally' '
 
 test_expect_success 'basic with modified format.pretty with suffix' '
 	git -c format.pretty="format:commit %H%d%n" range-diff \
-		master..topic master..unmodified
+		main..topic main..unmodified
 '
 
 test_expect_success 'basic with modified format.pretty without "commit "' '
 	git -c format.pretty="format:%H%n" range-diff \
-		master..topic master..unmodified
+		main..topic main..unmodified
 '
 
 test_expect_success 'range-diff compares notes by default' '
 	git notes add -m "topic note" topic &&
 	git notes add -m "unmodified note" unmodified &&
 	test_when_finished git notes remove topic unmodified &&
-	git range-diff --no-color master..topic master..unmodified \
+	git range-diff --no-color main..topic main..unmodified \
 		>actual &&
 	sed s/Z/\ /g >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid u1) s/5/A/
@@ -547,7 +547,7 @@ test_expect_success 'range-diff with --no-notes' '
 	git notes add -m "topic note" topic &&
 	git notes add -m "unmodified note" unmodified &&
 	test_when_finished git notes remove topic unmodified &&
-	git range-diff --no-color --no-notes master..topic master..unmodified \
+	git range-diff --no-color --no-notes main..topic main..unmodified \
 		>actual &&
 	cat >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid u1) s/5/A/
@@ -565,7 +565,7 @@ test_expect_success 'range-diff with multiple --notes' '
 	git notes --ref=note2 add -m "topic note2" topic &&
 	git notes --ref=note2 add -m "unmodified note2" unmodified &&
 	test_when_finished git notes --ref=note2 remove topic unmodified &&
-	git range-diff --no-color --notes=note1 --notes=note2 master..topic master..unmodified \
+	git range-diff --no-color --notes=note1 --notes=note2 main..topic main..unmodified \
 		>actual &&
 	sed s/Z/\ /g >expect <<-EOF &&
 	1:  $(test_oid t1) = 1:  $(test_oid u1) s/5/A/
@@ -595,7 +595,7 @@ test_expect_success 'format-patch --range-diff does not compare notes by default
 	git notes add -m "unmodified note" unmodified &&
 	test_when_finished git notes remove topic unmodified &&
 	git format-patch --cover-letter --range-diff=$prev \
-		master..unmodified >actual &&
+		main..unmodified >actual &&
 	test_when_finished "rm 000?-*" &&
 	test_line_count = 5 actual &&
 	test_i18ngrep "^Range-diff:$" 0000-* &&
@@ -612,7 +612,7 @@ test_expect_success 'format-patch --range-diff with --no-notes' '
 	git notes add -m "unmodified note" unmodified &&
 	test_when_finished git notes remove topic unmodified &&
 	git format-patch --no-notes --cover-letter --range-diff=$prev \
-		master..unmodified >actual &&
+		main..unmodified >actual &&
 	test_when_finished "rm 000?-*" &&
 	test_line_count = 5 actual &&
 	test_i18ngrep "^Range-diff:$" 0000-* &&
@@ -629,7 +629,7 @@ test_expect_success 'format-patch --range-diff with --notes' '
 	git notes add -m "unmodified note" unmodified &&
 	test_when_finished git notes remove topic unmodified &&
 	git format-patch --notes --cover-letter --range-diff=$prev \
-		master..unmodified >actual &&
+		main..unmodified >actual &&
 	test_when_finished "rm 000?-*" &&
 	test_line_count = 5 actual &&
 	test_i18ngrep "^Range-diff:$" 0000-* &&
@@ -658,7 +658,7 @@ test_expect_success 'format-patch --range-diff with format.notes config' '
 	test_when_finished git notes remove topic unmodified &&
 	test_config format.notes true &&
 	git format-patch --cover-letter --range-diff=$prev \
-		master..unmodified >actual &&
+		main..unmodified >actual &&
 	test_when_finished "rm 000?-*" &&
 	test_line_count = 5 actual &&
 	test_i18ngrep "^Range-diff:$" 0000-* &&
@@ -689,7 +689,7 @@ test_expect_success 'format-patch --range-diff with multiple notes' '
 	git notes --ref=note2 add -m "unmodified note2" unmodified &&
 	test_when_finished git notes --ref=note2 remove topic unmodified &&
 	git format-patch --notes=note1 --notes=note2 --cover-letter --range-diff=$prev \
-		master..unmodified >actual &&
+		main..unmodified >actual &&
 	test_when_finished "rm 000?-*" &&
 	test_line_count = 5 actual &&
 	test_i18ngrep "^Range-diff:$" 0000-* &&
t/t3206/history.export +1 -1
index 4c808e5b3b..4485adc37b 100644
@@ -168,7 +168,7 @@ mark :11
 data 10
 unrelated
 
-commit refs/heads/master
+commit refs/heads/main
 mark :12
 author Thomas Rast <[email protected]> 1374485127 +0200
 committer Thomas Rast <[email protected]> 1374485127 +0200
t/t3210-pack-refs.sh +2 -2
index f41b2afb99..a0b188fa4d 100755
@@ -135,7 +135,7 @@ test_expect_success 'delete ref with dangling packed version' '
 	git commit --allow-empty -m "future garbage" &&
 	git pack-refs --all &&
 	git reset --hard HEAD^ &&
-	git checkout master &&
+	git checkout main &&
 	git reflog expire --expire=all --all &&
 	git prune --expire=all &&
 	git branch -d lamb 2>result &&
@@ -240,7 +240,7 @@ test_expect_success 'retry acquiring packed-refs.lock' '
 
 test_expect_success SYMLINKS 'pack symlinked packed-refs' '
 	# First make sure that symlinking works when reading:
-	git update-ref refs/heads/lossy refs/heads/master &&
+	git update-ref refs/heads/lossy refs/heads/main &&
 	git for-each-ref >all-refs-before &&
 	mv .git/packed-refs .git/my-deviant-packed-refs &&
 	ln -s my-deviant-packed-refs .git/packed-refs &&
t/t3211-peel-ref.sh +2 -2
index 3b7caca421..73a914d194 100755
@@ -19,7 +19,7 @@ print_ref() {
 
 test_expect_success 'set up expected show-ref output' '
 	{
-		print_ref "refs/heads/master" &&
+		print_ref "refs/heads/main" &&
 		print_ref "refs/outside/foo" &&
 		print_ref "refs/outside/foo^{}" &&
 		print_ref "refs/tags/base" &&
@@ -47,7 +47,7 @@ test_expect_success 'create old-style pack-refs without fully-peeled' '
 	# know we are emulating exactly what an older git would have written.
 	{
 		echo "# pack-refs with: peeled " &&
-		print_ref "refs/heads/master" &&
+		print_ref "refs/heads/main" &&
 		print_ref "refs/outside/foo" &&
 		print_ref "refs/tags/base" &&
 		print_ref "refs/tags/foo" &&
t/t3301-notes.sh +3 -3
index 8f43303007..2b685580b6 100755
@@ -1295,11 +1295,11 @@ test_expect_success 'git notes copy diagnoses too many or too few parameters' '
 	test_i18ngrep "too many parameters" error
 '
 
-test_expect_success 'git notes get-ref expands refs/heads/master to refs/notes/refs/heads/master' '
+test_expect_success 'git notes get-ref expands refs/heads/main to refs/notes/refs/heads/main' '
 	test_unconfig core.notesRef &&
 	sane_unset GIT_NOTES_REF &&
-	echo refs/notes/refs/heads/master >expect &&
-	git notes --ref=refs/heads/master get-ref >actual &&
+	echo refs/notes/refs/heads/main >expect &&
+	git notes --ref=refs/heads/main get-ref >actual &&
 	test_cmp expect actual
 '
 
t/t3302-notes-index-expensive.sh +1 -1
index 7217c5e222..1c1490ca68 100755
@@ -20,7 +20,7 @@ create_repo () {
 			notemark=$(($mark+1))
 			test_tick &&
 			cat <<-INPUT_END &&
-			commit refs/heads/master
+			commit refs/heads/main
 			mark :$mark
 			committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
 			data <<COMMIT
t/t3303-notes-subtrees.sh +4 -4
index 704aee81ef..d994492469 100755
@@ -40,7 +40,7 @@ test_expect_success "setup: create $number_of_commits commits" '
 			nr=$(($nr+1)) &&
 			test_tick &&
 			cat <<INPUT_END
-commit refs/heads/master
+commit refs/heads/main
 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
 data <<COMMIT
 commit #$nr
@@ -75,7 +75,7 @@ test_sha1_based () {
 	(
 		start_note_commit &&
 		nr=$number_of_commits &&
-		git rev-list refs/heads/master |
+		git rev-list refs/heads/main |
 		while read sha1; do
 			note_path=$(echo "$sha1" | sed "$1")
 			cat <<INPUT_END &&
@@ -105,7 +105,7 @@ test_same_notes () {
 	(
 		start_note_commit &&
 		nr=$number_of_commits &&
-		git rev-list refs/heads/master |
+		git rev-list refs/heads/main |
 		while read sha1; do
 			first_note_path=$(echo "$sha1" | sed "$1")
 			second_note_path=$(echo "$sha1" | sed "$2")
@@ -144,7 +144,7 @@ test_concatenated_notes () {
 	(
 		start_note_commit &&
 		nr=$number_of_commits &&
-		git rev-list refs/heads/master |
+		git rev-list refs/heads/main |
 		while read sha1; do
 			first_note_path=$(echo "$sha1" | sed "$1")
 			second_note_path=$(echo "$sha1" | sed "$2")
t/t3304-notes-mixed.sh +4 -4
index 1709e8c00b..802e004016 100755
@@ -36,7 +36,7 @@ test_expect_success "setup: create a couple of commits" '
 
 	test_tick &&
 	cat <<INPUT_END >input &&
-commit refs/heads/master
+commit refs/heads/main
 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
 data <<COMMIT
 commit #1
@@ -51,7 +51,7 @@ INPUT_END
 
 	test_tick &&
 	cat <<INPUT_END >>input &&
-commit refs/heads/master
+commit refs/heads/main
 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
 data <<COMMIT
 commit #2
@@ -68,8 +68,8 @@ INPUT_END
 
 test_expect_success "create a notes tree with both notes and non-notes" '
 
-	commit1=$(git rev-parse refs/heads/master^) &&
-	commit2=$(git rev-parse refs/heads/master) &&
+	commit1=$(git rev-parse refs/heads/main^) &&
+	commit2=$(git rev-parse refs/heads/main) &&
 	test_tick &&
 	cat <<INPUT_END >input &&
 commit refs/notes/commits
t/t3308-notes-merge.sh +1 -1
index d69c84c640..202702be1a 100755
@@ -108,7 +108,7 @@ test_expect_success 'fail to merge into various non-notes refs' '
 	git update-ref refs/notes/dir/foo HEAD &&
 	test_must_fail git -c "core.notesRef=refs/notes/dir" notes merge x &&
 	test_must_fail git -c "core.notesRef=refs/notes/dir/" notes merge x &&
-	test_must_fail git -c "core.notesRef=refs/heads/master" notes merge x &&
+	test_must_fail git -c "core.notesRef=refs/heads/main" notes merge x &&
 	test_must_fail git -c "core.notesRef=refs/notes/y:" notes merge x &&
 	test_must_fail git -c "core.notesRef=refs/notes/y:foo" notes merge x &&
 	test_must_fail git -c "core.notesRef=refs/notes/foo^{bar" notes merge x
t/t3320-notes-merge-worktrees.sh +2 -2
index 823fdbda1f..465145c487 100755
@@ -36,8 +36,8 @@ test_expect_success 'modify notes ref ourselves (x)' '
 '
 
 test_expect_success 'create some new worktrees' '
-	git worktree add -b newbranch worktree master &&
-	git worktree add -b newbranch2 worktree2 master
+	git worktree add -b newbranch worktree main &&
+	git worktree add -b newbranch2 worktree2 main
 '
 
 test_expect_success 'merge z into y fails and sets NOTES_MERGE_REF' '
t/test-lib.sh +1 -1
index 3bb6675390..c464f8dcc8 100644
@@ -257,7 +257,7 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-[0-2]*)
+[0-2]*|3[0-3]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#66 lore raw

PATCH v2 6/27 t34*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Carefully excluding t3404, which sees independent development elsewhere at the time of writing, we use main as the default branch name in t34*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t34*.sh &&
	   git checkout HEAD -- t34\*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t3400-rebase.sh                 | 60 +++++++++++++++----------------
 t/t3402-rebase-merge.sh           | 44 +++++++++++------------
 t/t3403-rebase-skip.sh            |  6 ++--
 t/t3405-rebase-malformed.sh       |  8 ++---
 t/t3406-rebase-message.sh         | 24 ++++++-------
 t/t3407-rebase-abort.sh           | 18 +++++-----
 t/t3408-rebase-multi-line.sh      |  2 +-
 t/t3409-rebase-preserve-merges.sh | 10 +++---
 t/t3412-rebase-root.sh            | 28 +++++++--------
 t/t3413-rebase-hook.sh            | 42 +++++++++++-----------
 t/t3415-rebase-autosquash.sh      |  2 +-
 t/t3416-rebase-onto-threedots.sh  | 54 ++++++++++++++--------------
 t/t3418-rebase-continue.sh        | 24 ++++++-------
 t/t3419-rebase-patch-id.sh        | 12 +++----
 t/t3420-rebase-autostash.sh       |  8 ++---
 t/t3423-rebase-reword.sh          |  6 ++--
 t/t3427-rebase-subtree.sh         | 20 +++++------
 t/t3430-rebase-merges.sh          | 16 ++++-----
 t/t3431-rebase-fork-point.sh      | 32 ++++++++---------
 t/t3432-rebase-fast-forward.sh    | 34 +++++++++---------
 t/t3434-rebase-i18n.sh            |  8 ++---
 t/t3435-rebase-gpg-sign.sh        |  4 +--
 t/t3436-rebase-more-options.sh    |  2 +-
 t/test-lib.sh                     |  8 ++++-
 24 files changed, 239 insertions(+), 233 deletions(-)
t/t3400-rebase.sh +30 -30
index 40d2975995..cdfc7e083a 100755
@@ -24,15 +24,15 @@ test_expect_success 'prepare repository with topic branches' '
 	git update-index --add Y &&
 	git commit -m "Add Y." &&
 	git checkout -b filemove &&
-	git reset --soft master &&
+	git reset --soft main &&
 	mkdir D &&
 	git mv A D/A &&
 	git commit -m "Move A." &&
-	git checkout -b my-topic-branch master &&
+	git checkout -b my-topic-branch main &&
 	echo Second >B &&
 	git update-index --add B &&
 	git commit -m "Add B." &&
-	git checkout -f master &&
+	git checkout -f main &&
 	echo Third >>A &&
 	git update-index A &&
 	git commit -m "Modify A." &&
@@ -46,23 +46,23 @@ test_expect_success 'prepare repository with topic branches' '
 
 test_expect_success 'rebase on dirty worktree' '
 	echo dirty >>A &&
-	test_must_fail git rebase master
+	test_must_fail git rebase main
 '
 
 test_expect_success 'rebase on dirty cache' '
 	git add A &&
-	test_must_fail git rebase master
+	test_must_fail git rebase main
 '
 
-test_expect_success 'rebase against master' '
+test_expect_success 'rebase against main' '
 	git reset --hard HEAD &&
-	git rebase master
+	git rebase main
 '
 
 test_expect_success 'rebase sets ORIG_HEAD to pre-rebase state' '
 	git checkout -b orig-head topic &&
 	pre="$(git rev-parse --verify HEAD)" &&
-	git rebase master &&
+	git rebase main &&
 	test_cmp_rev "$pre" ORIG_HEAD &&
 	test_cmp_rev ! "$pre" HEAD
 '
@@ -93,19 +93,19 @@ test_expect_success 'HEAD was detached during rebase' '
 
 test_expect_success 'rebase from ambiguous branch name' '
 	git checkout -b topic side &&
-	git rebase master
+	git rebase main
 '
 
 test_expect_success 'rebase off of the previous branch using "-"' '
-	git checkout master &&
+	git checkout main &&
 	git checkout HEAD^ &&
 	git rebase @{-1} >expect.messages &&
-	git merge-base master HEAD >expect.forkpoint &&
+	git merge-base main HEAD >expect.forkpoint &&
 
-	git checkout master &&
+	git checkout main &&
 	git checkout HEAD^ &&
 	git rebase - >actual.messages &&
-	git merge-base master HEAD >actual.forkpoint &&
+	git merge-base main HEAD >actual.forkpoint &&
 
 	test_cmp expect.forkpoint actual.forkpoint &&
 	# the next one is dubious---we may want to say "-",
@@ -114,7 +114,7 @@ test_expect_success 'rebase off of the previous branch using "-"' '
 '
 
 test_expect_success 'rebase a single mode change' '
-	git checkout master &&
+	git checkout main &&
 	git branch -D topic &&
 	echo 1 >X &&
 	git add X &&
@@ -126,7 +126,7 @@ test_expect_success 'rebase a single mode change' '
 	test_chmod +x A &&
 	test_tick &&
 	git commit -m modechange &&
-	GIT_TRACE=1 git rebase master
+	GIT_TRACE=1 git rebase main
 '
 
 test_expect_success 'rebase is not broken by diff.renames' '
@@ -162,11 +162,11 @@ test_expect_success 'fail when upstream arg is missing and not configured' '
 test_expect_success 'rebase works with format.useAutoBase' '
 	test_config format.useAutoBase true &&
 	git checkout topic &&
-	git rebase master
+	git rebase main
 '
 
 test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--merge)' '
-	git checkout -b default-base master &&
+	git checkout -b default-base main &&
 	git checkout -b default topic &&
 	git config branch.default.remote . &&
 	git config branch.default.merge refs/heads/default-base &&
@@ -184,7 +184,7 @@ test_expect_success 'default to common base in @{upstream}s reflog if no upstrea
 '
 
 test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--apply)' '
-	git checkout -B default-base master &&
+	git checkout -B default-base main &&
 	git checkout -B default topic &&
 	git config branch.default.remote . &&
 	git config branch.default.merge refs/heads/default-base &&
@@ -226,13 +226,13 @@ test_expect_success 'cherry-picked commits and fork-point work together' '
 
 test_expect_success 'rebase --apply -q is quiet' '
 	git checkout -b quiet topic &&
-	git rebase --apply -q master >output.out 2>&1 &&
+	git rebase --apply -q main >output.out 2>&1 &&
 	test_must_be_empty output.out
 '
 
 test_expect_success 'rebase --merge -q is quiet' '
 	git checkout -B quiet topic &&
-	git rebase --merge -q master >output.out 2>&1 &&
+	git rebase --merge -q main >output.out 2>&1 &&
 	test_must_be_empty output.out
 '
 
@@ -294,7 +294,7 @@ test_expect_success 'rebase commit with an ancient timestamp' '
 '
 
 test_expect_success 'rebase with "From " line in commit message' '
-	git checkout -b preserve-from master~1 &&
+	git checkout -b preserve-from main~1 &&
 	cat >From_.msg <<EOF &&
 Somebody embedded an mbox in a commit message
 
@@ -310,7 +310,7 @@ EOF
 	>From_ &&
 	git add From_ &&
 	git commit -F From_.msg &&
-	git rebase master &&
+	git rebase main &&
 	git log -1 --pretty=format:%B >out &&
 	test_cmp From_.msg out
 '
@@ -357,12 +357,12 @@ test_expect_success 'rebase --apply and .gitattributes' '
 		git cherry-pick test &&
 
 		git checkout test &&
-		git rebase master &&
+		git rebase main &&
 		grep "smudged" a.txt &&
 
 		git checkout removal &&
 		git reset --hard &&
-		git rebase master &&
+		git rebase main &&
 		grep "clean" a.txt
 	)
 '
@@ -402,20 +402,20 @@ test_expect_success 'rebase -c rebase.useBuiltin=false warning' '
 '
 
 test_expect_success 'switch to branch checked out here' '
-	git checkout master &&
-	git rebase master master
+	git checkout main &&
+	git rebase main main
 '
 
 test_expect_success 'switch to branch not checked out' '
-	git checkout master &&
+	git checkout main &&
 	git branch other &&
-	git rebase master other
+	git rebase main other
 '
 
 test_expect_success 'refuse to switch to branch checked out elsewhere' '
-	git checkout master &&
+	git checkout main &&
 	git worktree add wt &&
-	test_must_fail git -C wt rebase master master 2>err &&
+	test_must_fail git -C wt rebase main main 2>err &&
 	test_i18ngrep "already checked out" err
 '
 
t/t3402-rebase-merge.sh +22 -22

132 lines not on this page · raw message

t/t3403-rebase-skip.sh +3 -3
index a927774910..360b46adef 100755
@@ -48,7 +48,7 @@ test_expect_success setup '
 	'
 
 test_expect_success 'rebase with git am -3 (default)' '
-	test_must_fail git rebase master
+	test_must_fail git rebase main
 '
 
 test_expect_success 'rebase --skip can not be used with other options' '
@@ -64,7 +64,7 @@ test_expect_success 'rebase moves back to skip-reference' '
 	test refs/heads/skip-reference = $(git symbolic-ref HEAD) &&
 	git branch post-rebase &&
 	git reset --hard pre-rebase &&
-	test_must_fail git rebase master &&
+	test_must_fail git rebase main &&
 	echo "hello" > hello &&
 	git add hello &&
 	git rebase --continue &&
@@ -75,7 +75,7 @@ test_expect_success 'rebase moves back to skip-reference' '
 test_expect_success 'checkout skip-merge' 'git checkout -f skip-merge'
 
 test_expect_success 'rebase with --merge' '
-	test_must_fail git rebase --merge master
+	test_must_fail git rebase --merge main
 '
 
 test_expect_success 'rebase --skip with --merge' '
t/t3405-rebase-malformed.sh +4 -4
index 860e63e444..7ef8bfa0ac 100755
@@ -52,7 +52,7 @@ test_expect_success setup '
 	git add file3 &&
 	git commit --allow-empty-message -m "" &&
 
-	git checkout master &&
+	git checkout main &&
 
 	echo One >file1 &&
 	test_tick &&
@@ -62,7 +62,7 @@ test_expect_success setup '
 
 test_expect_success 'rebase commit with multi-line subject' '
 
-	git rebase master multi-line-subject &&
+	git rebase main multi-line-subject &&
 	git cat-file commit HEAD | sed -e "1,/^\$/d" >F1 &&
 
 	test_cmp F0 F1 &&
@@ -70,14 +70,14 @@ test_expect_success 'rebase commit with multi-line subject' '
 '
 
 test_expect_success 'rebase commit with diff in message' '
-	git rebase master diff-in-message &&
+	git rebase main diff-in-message &&
 	git cat-file commit HEAD | sed -e "1,/^$/d" >G1 &&
 	test_cmp G0 G1 &&
 	test_cmp G G0
 '
 
 test_expect_success 'rebase -m commit with empty message' '
-	git rebase -m master empty-message-merge
+	git rebase -m main empty-message-merge
 '
 
 test_expect_success 'rebase -i commit with empty message' '
t/t3406-rebase-message.sh +12 -12
index 4afc528165..00e271fb36 100755
@@ -18,27 +18,27 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'rebase -m' '
-	git rebase -m master >actual &&
+	git rebase -m main >actual &&
 	test_must_be_empty actual
 '
 
-test_expect_success 'rebase against master twice' '
-	git rebase --apply master >out &&
+test_expect_success 'rebase against main twice' '
+	git rebase --apply main >out &&
 	test_i18ngrep "Current branch topic is up to date" out
 '
 
-test_expect_success 'rebase against master twice with --force' '
-	git rebase --force-rebase --apply master >out &&
+test_expect_success 'rebase against main twice with --force' '
+	git rebase --force-rebase --apply main >out &&
 	test_i18ngrep "Current branch topic is up to date, rebase forced" out
 '
 
-test_expect_success 'rebase against master twice from another branch' '
+test_expect_success 'rebase against main twice from another branch' '
 	git checkout topic^ &&
-	git rebase --apply master topic >out &&
+	git rebase --apply main topic >out &&
 	test_i18ngrep "Current branch topic is up to date" out
 '
 
-test_expect_success 'rebase fast-forward to master' '
+test_expect_success 'rebase fast-forward to main' '
 	git checkout topic^ &&
 	git rebase --apply topic >out &&
 	test_i18ngrep "Fast-forwarded HEAD to topic" out
@@ -46,21 +46,21 @@ test_expect_success 'rebase fast-forward to master' '
 
 test_expect_success 'rebase --stat' '
 	git reset --hard start &&
-	git rebase --stat master >diffstat.txt &&
+	git rebase --stat main >diffstat.txt &&
 	grep "^ fileX |  *1 +$" diffstat.txt
 '
 
 test_expect_success 'rebase w/config rebase.stat' '
 	git reset --hard start &&
 	git config rebase.stat true &&
-	git rebase master >diffstat.txt &&
+	git rebase main >diffstat.txt &&
 	grep "^ fileX |  *1 +$" diffstat.txt
 '
 
 test_expect_success 'rebase -n overrides config rebase.stat config' '
 	git reset --hard start &&
 	git config rebase.stat true &&
-	git rebase -n master >diffstat.txt &&
+	git rebase -n main >diffstat.txt &&
 	! grep "^ fileX |  *1 +$" diffstat.txt
 '
 
@@ -113,7 +113,7 @@ test_expect_success 'rebase -i onto unrelated history' '
 	git init unrelated &&
 	test_commit -C unrelated 1 &&
 	git -C unrelated remote add -f origin "$PWD" &&
-	git -C unrelated branch --set-upstream-to=origin/master &&
+	git -C unrelated branch --set-upstream-to=origin/main &&
 	git -C unrelated -c core.editor=true rebase -i -v --stat >actual &&
 	test_i18ngrep "Changes to " actual &&
 	test_i18ngrep "5 files changed" actual
t/t3407-rebase-abort.sh +9 -9
index 97efea0f56..2c2a5b9c10 100755
@@ -37,7 +37,7 @@ testrebase() {
 		cd "$work_dir" &&
 		# Clean up the state from the previous one
 		git reset --hard pre-rebase &&
-		test_must_fail git rebase$type master &&
+		test_must_fail git rebase$type main &&
 		test_path_is_dir "$dotest" &&
 		git rebase --abort &&
 		test $(git rev-parse to-rebase) = $(git rev-parse pre-rebase) &&
@@ -48,10 +48,10 @@ testrebase() {
 		cd "$work_dir" &&
 		# Clean up the state from the previous one
 		git reset --hard pre-rebase &&
-		test_must_fail git rebase$type master &&
+		test_must_fail git rebase$type main &&
 		test_path_is_dir "$dotest" &&
 		test_must_fail git rebase --skip &&
-		test $(git rev-parse HEAD) = $(git rev-parse master) &&
+		test $(git rev-parse HEAD) = $(git rev-parse main) &&
 		git rebase --abort &&
 		test $(git rev-parse to-rebase) = $(git rev-parse pre-rebase) &&
 		test ! -d "$dotest"
@@ -61,13 +61,13 @@ testrebase() {
 		cd "$work_dir" &&
 		# Clean up the state from the previous one
 		git reset --hard pre-rebase &&
-		test_must_fail git rebase$type master &&
+		test_must_fail git rebase$type main &&
 		test_path_is_dir "$dotest" &&
 		echo c > a &&
 		echo d >> a &&
 		git add a &&
 		test_must_fail git rebase --continue &&
-		test $(git rev-parse HEAD) != $(git rev-parse master) &&
+		test $(git rev-parse HEAD) != $(git rev-parse main) &&
 		git rebase --abort &&
 		test $(git rev-parse to-rebase) = $(git rev-parse pre-rebase) &&
 		test ! -d "$dotest"
@@ -78,7 +78,7 @@ testrebase() {
 		# Clean up the state from the previous one
 		git reset --hard pre-rebase &&
 		git reflog show to-rebase > reflog_before &&
-		test_must_fail git rebase$type master &&
+		test_must_fail git rebase$type main &&
 		git rebase --abort &&
 		git reflog show to-rebase > reflog_after &&
 		test_cmp reflog_before reflog_after &&
@@ -89,7 +89,7 @@ testrebase() {
 		cd "$work_dir" &&
 		# Clean up the state from the previous one
 		git reset --hard pre-rebase &&
-		test_must_fail git rebase$type master &&
+		test_must_fail git rebase$type main &&
 		test_must_fail git rebase -v --abort &&
 		test_must_fail git rebase --abort -v &&
 		git rebase --abort
@@ -103,7 +103,7 @@ test_expect_success 'rebase --apply --quit' '
 	cd "$work_dir" &&
 	# Clean up the state from the previous one
 	git reset --hard pre-rebase &&
-	test_must_fail git rebase --apply master &&
+	test_must_fail git rebase --apply main &&
 	test_path_is_dir .git/rebase-apply &&
 	head_before=$(git rev-parse HEAD) &&
 	git rebase --quit &&
@@ -115,7 +115,7 @@ test_expect_success 'rebase --merge --quit' '
 	cd "$work_dir" &&
 	# Clean up the state from the previous one
 	git reset --hard pre-rebase &&
-	test_must_fail git rebase --merge master &&
+	test_must_fail git rebase --merge main &&
 	test_path_is_dir .git/rebase-merge &&
 	head_before=$(git rev-parse HEAD) &&
 	git rebase --quit &&
t/t3408-rebase-multi-line.sh +1 -1
index d2bd7c17b0..1cba82f001 100755
@@ -46,7 +46,7 @@ But otherwise with a sane description." side2 &&
 test_expect_success rebase '
 
 	git checkout side &&
-	git rebase master &&
+	git rebase main &&
 	git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
 	git cat-file commit side@{1} | sed -e "1,/^\$/d" >expect &&
 	test_cmp expect actual
t/t3409-rebase-preserve-merges.sh +5 -5
index 3b340f1ece..b078985b95 100755
@@ -18,7 +18,7 @@ export GIT_AUTHOR_EMAIL
 
 # Clone 2 (conflicting merge):
 #
-# A1--A2--B3   <-- origin/master
+# A1--A2--B3   <-- origin/main
 #  \       \
 #   B1------M  <-- topic
 #    \
@@ -26,7 +26,7 @@ export GIT_AUTHOR_EMAIL
 #
 # Clone 3 (no-ff merge):
 #
-# A1--A2--B3   <-- origin/master
+# A1--A2--B3   <-- origin/main
 #  \
 #   B1------M  <-- topic
 #    \     /
@@ -44,7 +44,7 @@ test_expect_success 'setup for merge-preserving rebase' \
 	echo Second > B &&
 	git add B &&
 	git commit -m "Add B1" &&
-	git checkout -f master &&
+	git checkout -f main &&
 	echo Third >> A &&
 	git commit -a -m "Modify A2" &&
 	echo Fifth > B &&
@@ -55,10 +55,10 @@ test_expect_success 'setup for merge-preserving rebase' \
 	(
 		cd clone2 &&
 		git checkout -b topic origin/topic &&
-		test_must_fail git merge origin/master &&
+		test_must_fail git merge origin/main &&
 		echo Resolved >B &&
 		git add B &&
-		git commit -m "Merge origin/master into topic"
+		git commit -m "Merge origin/main into topic"
 	) &&
 
 	git clone ./. clone3 &&
t/t3412-rebase-root.sh +14 -14
index 21632a984e..120315ac0e 100755
@@ -24,7 +24,7 @@ test_expect_success 'prepare repository' '
 
 test_expect_success 'rebase --root fails with too many args' '
 	git checkout -B fail other &&
-	test_must_fail git rebase --onto master --root fail fail
+	test_must_fail git rebase --onto main --root fail fail
 '
 
 test_expect_success 'setup pre-rebase hook' '
@@ -44,7 +44,7 @@ EOF
 
 test_expect_success 'rebase --root --onto <newbase>' '
 	git checkout -b work other &&
-	git rebase --root --onto master &&
+	git rebase --root --onto main &&
 	git log --pretty=tformat:"%s" > rebased &&
 	test_cmp expect rebased
 '
@@ -55,7 +55,7 @@ test_expect_success 'pre-rebase got correct input (1)' '
 
 test_expect_success 'rebase --root --onto <newbase> <branch>' '
 	git branch work2 other &&
-	git rebase --root --onto master work2 &&
+	git rebase --root --onto main work2 &&
 	git log --pretty=tformat:"%s" > rebased2 &&
 	test_cmp expect rebased2
 '
@@ -66,7 +66,7 @@ test_expect_success 'pre-rebase got correct input (2)' '
 
 test_expect_success 'rebase -i --root --onto <newbase>' '
 	git checkout -b work3 other &&
-	git rebase -i --root --onto master &&
+	git rebase -i --root --onto main &&
 	git log --pretty=tformat:"%s" > rebased3 &&
 	test_cmp expect rebased3
 '
@@ -77,7 +77,7 @@ test_expect_success 'pre-rebase got correct input (3)' '
 
 test_expect_success 'rebase -i --root --onto <newbase> <branch>' '
 	git branch work4 other &&
-	git rebase -i --root --onto master work4 &&
+	git rebase -i --root --onto main work4 &&
 	git log --pretty=tformat:"%s" > rebased4 &&
 	test_cmp expect rebased4
 '
@@ -88,7 +88,7 @@ test_expect_success 'pre-rebase got correct input (4)' '
 
 test_expect_success REBASE_P 'rebase -i -p with linear history' '
 	git checkout -b work5 other &&
-	git rebase -i -p --root --onto master &&
+	git rebase -i -p --root --onto main &&
 	git log --pretty=tformat:"%s" > rebased5 &&
 	test_cmp expect rebased5
 '
@@ -122,7 +122,7 @@ EOF
 
 test_expect_success REBASE_P 'rebase -i -p with merge' '
 	git checkout -b work6 other &&
-	git rebase -i -p --root --onto master &&
+	git rebase -i -p --root --onto main &&
 	log_with_names work6 > rebased6 &&
 	test_cmp expect-side rebased6
 '
@@ -157,7 +157,7 @@ EOF
 
 test_expect_success REBASE_P 'rebase -i -p with two roots' '
 	git checkout -b work7 other &&
-	git rebase -i -p --root --onto master &&
+	git rebase -i -p --root --onto main &&
 	log_with_names work7 > rebased7 &&
 	test_cmp expect-third rebased7
 '
@@ -173,14 +173,14 @@ EOF
 
 test_expect_success 'pre-rebase hook stops rebase' '
 	git checkout -b stops1 other &&
-	test_must_fail git rebase --root --onto master &&
+	test_must_fail git rebase --root --onto main &&
 	test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops1 &&
 	test 0 = $(git rev-list other...stops1 | wc -l)
 '
 
 test_expect_success 'pre-rebase hook stops rebase -i' '
 	git checkout -b stops2 other &&
-	test_must_fail git rebase --root --onto master &&
+	test_must_fail git rebase --root --onto main &&
 	test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops2 &&
 	test 0 = $(git rev-list other...stops2 | wc -l)
 '
@@ -190,7 +190,7 @@ test_expect_success 'remove pre-rebase hook' '
 '
 
 test_expect_success 'set up a conflict' '
-	git checkout master &&
+	git checkout main &&
 	echo conflict > B &&
 	git add B &&
 	git commit -m conflict
@@ -198,7 +198,7 @@ test_expect_success 'set up a conflict' '
 
 test_expect_success 'rebase --root with conflict (first part)' '
 	git checkout -b conflict1 other &&
-	test_must_fail git rebase --root --onto master &&
+	test_must_fail git rebase --root --onto main &&
 	git ls-files -u | grep "B$"
 '
 
@@ -225,7 +225,7 @@ test_expect_success 'rebase --root with conflict (second part)' '
 
 test_expect_success 'rebase -i --root with conflict (first part)' '
 	git checkout -b conflict2 other &&
-	test_must_fail git rebase -i --root --onto master &&
+	test_must_fail git rebase -i --root --onto main &&
 	git ls-files -u | grep "B$"
 '
 
@@ -263,7 +263,7 @@ EOF
 
 test_expect_success REBASE_P 'rebase -i -p --root with conflict (first part)' '
 	git checkout -b conflict3 other &&
-	test_must_fail git rebase -i -p --root --onto master &&
+	test_must_fail git rebase -i -p --root --onto main &&
 	git ls-files -u | grep "B$"
 '
 
t/t3413-rebase-hook.sh +21 -21

123 lines not on this page · raw message

t/t3415-rebase-autosquash.sh +1 -1
index 7bab6000dc..40bb7ac649 100755
@@ -407,7 +407,7 @@ test_expect_success 'wrapped original subject' '
 
 test_expect_success 'abort last squash' '
 	test_when_finished "test_might_fail git rebase --abort" &&
-	test_when_finished "git checkout master" &&
+	test_when_finished "git checkout main" &&
 
 	git checkout -b some-squashes &&
 	git commit --allow-empty -m first &&
t/t3416-rebase-onto-threedots.sh +27 -27

167 lines not on this page · raw message

t/t3418-rebase-continue.sh +12 -12
index 7a2da972fd..b9e059e168 100755
@@ -15,13 +15,13 @@ test_expect_success 'setup' '
 	git checkout -b topic HEAD^ &&
 	test_commit "commit-new-file-F2-on-topic-branch" F2 22 &&
 
-	git checkout master
+	git checkout main
 '
 
 test_expect_success 'interactive rebase --continue works with touched file' '
 	rm -fr .git/rebase-* &&
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 
 	FAKE_LINES="edit 1" git rebase -i HEAD^ &&
 	test-tool chmtime =-60 F1 &&
@@ -31,9 +31,9 @@ test_expect_success 'interactive rebase --continue works with touched file' '
 test_expect_success 'non-interactive rebase --continue works with touched file' '
 	rm -fr .git/rebase-* &&
 	git reset --hard &&
-	git checkout master &&
+	git checkout main &&
 
-	test_must_fail git rebase --onto master master topic &&
+	test_must_fail git rebase --onto main main topic &&
 	echo "Resolved" >F2 &&
 	git add F2 &&
 	test-tool chmtime =-60 F1 &&
@@ -61,7 +61,7 @@ test_expect_success 'rebase --continue remembers merge strategy and options' '
 	chmod +x test-bin/git-merge-funny &&
 	(
 		PATH=./test-bin:$PATH &&
-		test_must_fail git rebase -s funny -Xopt master topic
+		test_must_fail git rebase -s funny -Xopt main topic
 	) &&
 	test -f funny.was.run &&
 	rm funny.was.run &&
@@ -93,7 +93,7 @@ test_expect_success 'rebase -i --continue handles merge strategy and options' '
 	chmod +x test-bin/git-merge-funny &&
 	(
 		PATH=./test-bin:$PATH &&
-		test_must_fail git rebase -i -s funny -Xopt -Xfoo master topic
+		test_must_fail git rebase -i -s funny -Xopt -Xfoo main topic
 	) &&
 	test -f funny.was.run &&
 	rm funny.was.run &&
@@ -188,11 +188,11 @@ test_expect_success '--skip after failed fixup cleans commit message' '
 test_expect_success 'setup rerere database' '
 	rm -fr .git/rebase-* &&
 	git reset --hard commit-new-file-F3-on-topic-branch &&
-	git checkout master &&
+	git checkout main &&
 	test_commit "commit-new-file-F3" F3 3 &&
 	test_config rerere.enabled true &&
 	git update-ref refs/heads/topic commit-new-file-F3-on-topic-branch &&
-	test_must_fail git rebase -m master topic &&
+	test_must_fail git rebase -m main topic &&
 	echo "Resolved" >F2 &&
 	cp F2 expected-F2 &&
 	git add F2 &&
@@ -207,7 +207,7 @@ test_expect_success 'setup rerere database' '
 prepare () {
 	rm -fr .git/rebase-* &&
 	git reset --hard commit-new-file-F3-on-topic-branch &&
-	git checkout master &&
+	git checkout main &&
 	test_config rerere.enabled true
 }
 
@@ -215,7 +215,7 @@ test_rerere_autoupdate () {
 	action=$1 &&
 	test_expect_success "rebase $action --continue remembers --rerere-autoupdate" '
 		prepare &&
-		test_must_fail git rebase $action --rerere-autoupdate master topic &&
+		test_must_fail git rebase $action --rerere-autoupdate main topic &&
 		test_cmp expected-F2 F2 &&
 		git diff-files --quiet &&
 		test_must_fail git rebase --continue &&
@@ -227,7 +227,7 @@ test_rerere_autoupdate () {
 	test_expect_success "rebase $action --continue honors rerere.autoUpdate" '
 		prepare &&
 		test_config rerere.autoupdate true &&
-		test_must_fail git rebase $action master topic &&
+		test_must_fail git rebase $action main topic &&
 		test_cmp expected-F2 F2 &&
 		git diff-files --quiet &&
 		test_must_fail git rebase --continue &&
@@ -239,7 +239,7 @@ test_rerere_autoupdate () {
 	test_expect_success "rebase $action --continue remembers --no-rerere-autoupdate" '
 		prepare &&
 		test_config rerere.autoupdate true &&
-		test_must_fail git rebase $action --no-rerere-autoupdate master topic &&
+		test_must_fail git rebase $action --no-rerere-autoupdate main topic &&
 		test_cmp expected-F2 F2 &&
 		test_must_fail git diff-files --quiet &&
 		git add F2 &&
t/t3419-rebase-patch-id.sh +6 -6
index 1f32faa4a4..29fa76be4d 100755
@@ -24,7 +24,7 @@ test_expect_success 'setup' '
 
 test_expect_success 'setup: 500 lines' '
 	rm -f .gitattributes &&
-	git checkout -q -f master &&
+	git checkout -q -f main &&
 	git reset --hard root &&
 	test_seq 500 >file &&
 	git add file &&
@@ -40,7 +40,7 @@ test_expect_success 'setup: 500 lines' '
 	git add newfile &&
 	git commit -q -m "add small file" &&
 
-	git cherry-pick master >/dev/null 2>&1
+	git cherry-pick main >/dev/null 2>&1
 '
 
 test_expect_success 'setup attributes' '
@@ -48,18 +48,18 @@ test_expect_success 'setup attributes' '
 '
 
 test_expect_success 'detect upstream patch' '
-	git checkout -q master &&
+	git checkout -q main &&
 	scramble file &&
 	git add file &&
 	git commit -q -m "change big file again" &&
 	git checkout -q other^{} &&
-	git rebase master &&
-	git rev-list master...HEAD~ >revs &&
+	git rebase main &&
+	git rev-list main...HEAD~ >revs &&
 	test_must_be_empty revs
 '
 
 test_expect_success 'do not drop patch' '
-	git branch -f squashed master &&
+	git branch -f squashed main &&
 	git checkout -q -f squashed &&
 	git reset -q --soft HEAD~2 &&
 	git commit -q -m squashed &&
t/t3420-rebase-autostash.sh +4 -4
index ca331733fb..b1263e5a47 100755
@@ -21,12 +21,12 @@ test_expect_success setup '
 	git add . &&
 	test_tick &&
 	git commit -m "third commit" &&
-	git checkout -b unrelated-onto-branch master &&
+	git checkout -b unrelated-onto-branch main &&
 	echo unrelated >file4 &&
 	git add . &&
 	test_tick &&
 	git commit -m "unrelated commit" &&
-	git checkout -b related-onto-branch master &&
+	git checkout -b related-onto-branch main &&
 	echo conflicting-change >file2 &&
 	git add . &&
 	test_tick &&
@@ -305,7 +305,7 @@ test_expect_success 'autostash is saved on editor failure with conflict' '
 '
 
 test_expect_success 'autostash with dirty submodules' '
-	test_when_finished "git reset --hard && git checkout master" &&
+	test_when_finished "git reset --hard && git checkout main" &&
 	git checkout -b with-submodule &&
 	git submodule add ./ sub &&
 	test_tick &&
@@ -324,7 +324,7 @@ test_expect_success 'branch is left alone when possible' '
 
 test_expect_success 'never change active branch' '
 	git checkout -b not-the-feature-branch unrelated-onto-branch &&
-	test_when_finished "git reset --hard && git checkout master" &&
+	test_when_finished "git reset --hard && git checkout main" &&
 	echo changed >file0 &&
 	git rebase --autostash not-the-feature-branch feature-branch &&
 	test_cmp_rev not-the-feature-branch unrelated-onto-branch
t/t3423-rebase-reword.sh +3 -3
index 6963750794..4859bb8f72 100755
@@ -7,7 +7,7 @@ test_description='git rebase interactive with rewording'
 . "$TEST_DIRECTORY"/lib-rebase.sh
 
 test_expect_success 'setup' '
-	test_commit master file-1 test &&
+	test_commit main file-1 test &&
 
 	git checkout -b stuff &&
 
@@ -22,7 +22,7 @@ test_expect_success 'reword without issues functions as intended' '
 
 	set_fake_editor &&
 	FAKE_LINES="pick 1 reword 2" FAKE_COMMIT_MESSAGE="feature_b_reworded" \
-		git rebase -i -v master &&
+		git rebase -i -v main &&
 
 	test "$(git log -1 --format=%B)" = "feature_b_reworded" &&
 	test $(git rev-list --count HEAD) = 3
@@ -35,7 +35,7 @@ test_expect_success 'reword after a conflict preserves commit' '
 
 	set_fake_editor &&
 	test_must_fail env FAKE_LINES="reword 2" \
-		git rebase -i -v master &&
+		git rebase -i -v main &&
 
 	git checkout --theirs file-2 &&
 	git add file-2 &&
t/t3427-rebase-subtree.sh +10 -10
index 5839719ba1..265856ece6 100755
@@ -17,7 +17,7 @@ commit_message() {
 #
 # topic_1 - topic_2 - topic_3
 #                             \
-# README ---------------------- Add subproject master - topic_4 - files_subtree/topic_5
+# README ---------------------- Add subproject main - topic_4 - files_subtree/topic_5
 #
 # Where the merge moves the files topic_[123].t into the subdirectory
 # files_subtree/ and topic_4 as well as files_subtree/topic_5 add files to that
@@ -28,7 +28,7 @@ commit_message() {
 # an empty commit is added on top. The pre-rebase commit history looks like
 # this:
 #
-# Add subproject master - topic_4 - files_subtree/topic_5 - Empty commit
+# Add subproject main - topic_4 - files_subtree/topic_5 - Empty commit
 #
 # where the root commit adds three files: topic_1.t, topic_2.t and topic_3.t.
 #
@@ -48,11 +48,11 @@ test_expect_success 'setup' '
 	test_commit -C files topic_3 &&
 
 	: perform subtree merge into files_subtree/ &&
-	git fetch files refs/heads/master:refs/heads/files-master &&
+	git fetch files refs/heads/main:refs/heads/files-main &&
 	git merge -s ours --no-commit --allow-unrelated-histories \
-		files-master &&
-	git read-tree --prefix=files_subtree -u files-master &&
-	git commit -m "Add subproject master" &&
+		files-main &&
+	git read-tree --prefix=files_subtree -u files-main &&
+	git commit -m "Add subproject main" &&
 
 	: add two extra commits to rebase &&
 	test_commit -C files_subtree topic_4 &&
@@ -70,7 +70,7 @@ test_expect_success 'setup' '
 test_expect_failure REBASE_P 'Rebase -Xsubtree --preserve-merges --onto commit' '
 	reset_rebase &&
 	git checkout -b rebase-preserve-merges to-rebase &&
-	git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master &&
+	git rebase -Xsubtree=files_subtree --preserve-merges --onto files-main main &&
 	verbose test "$(commit_message HEAD~)" = "topic_4" &&
 	verbose test "$(commit_message HEAD)" = "files_subtree/topic_5"
 '
@@ -79,7 +79,7 @@ test_expect_failure REBASE_P 'Rebase -Xsubtree --preserve-merges --onto commit'
 test_expect_failure REBASE_P 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit' '
 	reset_rebase &&
 	git checkout -b rebase-keep-empty to-rebase &&
-	git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master &&
+	git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-main main &&
 	verbose test "$(commit_message HEAD~2)" = "topic_4" &&
 	verbose test "$(commit_message HEAD~)" = "files_subtree/topic_5" &&
 	verbose test "$(commit_message HEAD)" = "Empty commit"
@@ -88,7 +88,7 @@ test_expect_failure REBASE_P 'Rebase -Xsubtree --keep-empty --preserve-merges --
 test_expect_success 'Rebase -Xsubtree --empty=ask --onto commit' '
 	reset_rebase &&
 	git checkout -b rebase-onto to-rebase &&
-	test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --onto files-master master &&
+	test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --onto files-main main &&
 	: first pick results in no changes &&
 	git rebase --skip &&
 	verbose test "$(commit_message HEAD~2)" = "topic_4" &&
@@ -99,7 +99,7 @@ test_expect_success 'Rebase -Xsubtree --empty=ask --onto commit' '
 test_expect_success 'Rebase -Xsubtree --empty=ask --rebase-merges --onto commit' '
 	reset_rebase &&
 	git checkout -b rebase-merges-onto to-rebase &&
-	test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --rebase-merges --onto files-master --root &&
+	test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --rebase-merges --onto files-main --root &&
 	: first pick results in no changes &&
 	git rebase --skip &&
 	verbose test "$(commit_message HEAD~2)" = "topic_4" &&
t/t3430-rebase-merges.sh +8 -8
index b454f400eb..3cc99693af 100755
@@ -12,7 +12,7 @@ Initial setup:
 
     -- B --                   (first)
    /       \
- A - C - D - E - H            (master)
+ A - C - D - E - H            (main)
    \    \       /
     \    F - G                (second)
      \
@@ -37,7 +37,7 @@ test_expect_success 'setup' '
 	git checkout -b first &&
 	test_commit B &&
 	b=$(git rev-parse --short HEAD) &&
-	git checkout master &&
+	git checkout main &&
 	test_commit C &&
 	c=$(git rev-parse --short HEAD) &&
 	test_commit D &&
@@ -52,7 +52,7 @@ test_expect_success 'setup' '
 	f=$(git rev-parse --short HEAD) &&
 	test_commit G &&
 	g=$(git rev-parse --short HEAD) &&
-	git checkout master &&
+	git checkout main &&
 	git merge --no-commit G &&
 	test_tick &&
 	git commit -m H &&
@@ -82,7 +82,7 @@ test_expect_success 'create completely different structure' '
 	EOF
 	test_config sequence.editor \""$PWD"/replace-editor.sh\" &&
 	test_tick &&
-	git rebase -i -r A master &&
+	git rebase -i -r A main &&
 	test_cmp_graph <<-\EOF
 	*   Merge the topic branch '\''onebranch'\''
 	|\
@@ -183,7 +183,7 @@ test_expect_success 'fast-forward merge -c still rewords' '
 '
 
 test_expect_success 'with a branch tip that was cherry-picked already' '
-	git checkout -b already-upstream master &&
+	git checkout -b already-upstream main &&
 	base="$(git rev-parse --verify HEAD)" &&
 
 	test_commit A1 &&
@@ -211,7 +211,7 @@ test_expect_success 'with a branch tip that was cherry-picked already' '
 '
 
 test_expect_success 'do not rebase cousins unless asked for' '
-	git checkout -b cousins master &&
+	git checkout -b cousins main &&
 	before="$(git rev-parse --verify HEAD)" &&
 	test_tick &&
 	git rebase -r HEAD^ &&
@@ -340,7 +340,7 @@ test_expect_success 'a "merge" into a root commit is a fast-forward' '
 test_expect_success 'A root commit can be a cousin, treat it that way' '
 	git checkout --orphan khnum &&
 	test_commit yama &&
-	git checkout -b asherah master &&
+	git checkout -b asherah main &&
 	test_commit shamkat &&
 	git merge --allow-unrelated-histories khnum &&
 	test_tick &&
@@ -367,7 +367,7 @@ test_expect_success 'labels that are object IDs are rewritten' '
 	git checkout -b third B &&
 	test_commit I &&
 	third=$(git rev-parse HEAD) &&
-	git checkout -b labels master &&
+	git checkout -b labels main &&
 	git merge --no-commit third &&
 	test_tick &&
 	git commit -m "Merge commit '\''$third'\'' into labels" &&
t/t3431-rebase-fork-point.sh +16 -16
index 172562789e..d5d9b2304d 100755
@@ -7,11 +7,11 @@ test_description='git rebase --fork-point test'
 
 . ./test-lib.sh
 
-# A---B---D---E    (master)
+# A---B---D---E    (main)
 #      \
 #       C*---F---G (side)
 #
-# C was formerly part of master but master was rewound to remove C
+# C was formerly part of main but main was rewound to remove C
 #
 test_expect_success setup '
 	test_commit A &&
@@ -30,7 +30,7 @@ test_rebase () {
 	expected="$1" &&
 	shift &&
 	test_expect_success "git rebase $*" "
-		git checkout master &&
+		git checkout main &&
 		git reset --hard E &&
 		git checkout side &&
 		git reset --hard G &&
@@ -48,26 +48,26 @@ test_rebase 'G F C E D B A' --no-fork-point
 test_rebase 'G F C D B A' --no-fork-point --onto D
 test_rebase 'G F C B A' --no-fork-point --keep-base
 
-test_rebase 'G F E D B A' --fork-point refs/heads/master
-test_rebase 'G F E D B A' --fork-point master
+test_rebase 'G F E D B A' --fork-point refs/heads/main
+test_rebase 'G F E D B A' --fork-point main
 
-test_rebase 'G F D B A' --fork-point --onto D refs/heads/master
-test_rebase 'G F D B A' --fork-point --onto D master
+test_rebase 'G F D B A' --fork-point --onto D refs/heads/main
+test_rebase 'G F D B A' --fork-point --onto D main
 
-test_rebase 'G F B A' --fork-point --keep-base refs/heads/master
-test_rebase 'G F B A' --fork-point --keep-base master
+test_rebase 'G F B A' --fork-point --keep-base refs/heads/main
+test_rebase 'G F B A' --fork-point --keep-base main
 
-test_rebase 'G F C E D B A' refs/heads/master
-test_rebase 'G F C E D B A' master
+test_rebase 'G F C E D B A' refs/heads/main
+test_rebase 'G F C E D B A' main
 
-test_rebase 'G F C D B A' --onto D refs/heads/master
-test_rebase 'G F C D B A' --onto D master
+test_rebase 'G F C D B A' --onto D refs/heads/main
+test_rebase 'G F C D B A' --onto D main
 
-test_rebase 'G F C B A' --keep-base refs/heads/master
-test_rebase 'G F C B A' --keep-base master
+test_rebase 'G F C B A' --keep-base refs/heads/main
+test_rebase 'G F C B A' --keep-base main
 
 test_expect_success 'git rebase --fork-point with ambigous refname' '
-	git checkout master &&
+	git checkout main &&
 	git checkout -b one &&
 	git checkout side &&
 	git tag one &&
t/t3432-rebase-fast-forward.sh +17 -17
index a29eda87e9..b87537ca7d 100755
@@ -84,19 +84,19 @@ test_rebase_same_head_ () {
 
 changes='no changes'
 test_rebase_same_head success noop same success work same
-test_rebase_same_head success noop same success work same master
+test_rebase_same_head success noop same success work same main
 test_rebase_same_head success noop same success work diff --onto B B
 test_rebase_same_head success noop same success work diff --onto B... B
-test_rebase_same_head success noop same success work same --onto master... master
-test_rebase_same_head success noop same success work same --keep-base master
+test_rebase_same_head success noop same success work same --onto main... main
+test_rebase_same_head success noop same success work same --keep-base main
 test_rebase_same_head success noop same success work same --keep-base
 test_rebase_same_head success noop same success work same --no-fork-point
 test_rebase_same_head success noop same success work same --keep-base --no-fork-point
-test_rebase_same_head success noop same success work same --fork-point master
+test_rebase_same_head success noop same success work same --fork-point main
 test_rebase_same_head success noop same success work diff --fork-point --onto B B
 test_rebase_same_head success noop same success work diff --fork-point --onto B... B
-test_rebase_same_head success noop same success work same --fork-point --onto master... master
-test_rebase_same_head success noop same success work same --keep-base --keep-base master
+test_rebase_same_head success noop same success work same --fork-point --onto main... main
+test_rebase_same_head success noop same success work same --keep-base --keep-base main
 
 test_expect_success 'add work same to side' '
 	test_commit E
@@ -104,22 +104,22 @@ test_expect_success 'add work same to side' '
 
 changes='our changes'
 test_rebase_same_head success noop same success work same
-test_rebase_same_head success noop same success work same master
+test_rebase_same_head success noop same success work same main
 test_rebase_same_head success noop same success work diff --onto B B
 test_rebase_same_head success noop same success work diff --onto B... B
-test_rebase_same_head success noop same success work same --onto master... master
-test_rebase_same_head success noop same success work same --keep-base master
+test_rebase_same_head success noop same success work same --onto main... main
+test_rebase_same_head success noop same success work same --keep-base main
 test_rebase_same_head success noop same success work same --keep-base
 test_rebase_same_head success noop same success work same --no-fork-point
 test_rebase_same_head success noop same success work same --keep-base --no-fork-point
-test_rebase_same_head success noop same success work same --fork-point master
+test_rebase_same_head success noop same success work same --fork-point main
 test_rebase_same_head success noop same success work diff --fork-point --onto B B
 test_rebase_same_head success noop same success work diff --fork-point --onto B... B
-test_rebase_same_head success noop same success work same --fork-point --onto master... master
-test_rebase_same_head success noop same success work same --fork-point --keep-base master
+test_rebase_same_head success noop same success work same --fork-point --onto main... main
+test_rebase_same_head success noop same success work same --fork-point --keep-base main
 
 test_expect_success 'add work same to upstream' '
-	git checkout master &&
+	git checkout main &&
 	test_commit F &&
 	git checkout side
 '
@@ -127,12 +127,12 @@ test_expect_success 'add work same to upstream' '
 changes='our and their changes'
 test_rebase_same_head success noop same success work diff --onto B B
 test_rebase_same_head success noop same success work diff --onto B... B
-test_rebase_same_head success noop same success work diff --onto master... master
-test_rebase_same_head success noop same success work diff --keep-base master
+test_rebase_same_head success noop same success work diff --onto main... main
+test_rebase_same_head success noop same success work diff --keep-base main
 test_rebase_same_head success noop same success work diff --keep-base
 test_rebase_same_head failure work same success work diff --fork-point --onto B B
 test_rebase_same_head failure work same success work diff --fork-point --onto B... B
-test_rebase_same_head success noop same success work diff --fork-point --onto master... master
-test_rebase_same_head success noop same success work diff --fork-point --keep-base master
+test_rebase_same_head success noop same success work diff --fork-point --onto main... main
+test_rebase_same_head success noop same success work diff --fork-point --keep-base main
 
 test_done
t/t3434-rebase-i18n.sh +4 -4
index c7c835cde9..a252908d02 100755
@@ -7,7 +7,7 @@ test_description='rebase with changing encoding
 
 Initial setup:
 
-1 - 2              master
+1 - 2              main
  \
   3 - 4            first
    \
@@ -41,7 +41,7 @@ test_expect_success 'rebase --rebase-merges update encoding eucJP to UTF-8' '
 	git config i18n.commitencoding eucJP &&
 	git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second &&
 	git config i18n.commitencoding UTF-8 &&
-	git rebase --rebase-merges master &&
+	git rebase --rebase-merges main &&
 	compare_msg eucJP.txt eucJP UTF-8
 '
 
@@ -50,7 +50,7 @@ test_expect_success 'rebase --rebase-merges update encoding eucJP to ISO-2022-JP
 	git config i18n.commitencoding eucJP &&
 	git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second &&
 	git config i18n.commitencoding ISO-2022-JP &&
-	git rebase --rebase-merges master &&
+	git rebase --rebase-merges main &&
 	compare_msg eucJP.txt eucJP ISO-2022-JP
 '
 
@@ -66,7 +66,7 @@ test_rebase_continue_update_encode () {
 		git config i18n.commitencoding $old &&
 		git commit -F "$TEST_DIRECTORY/t3434/$msgfile" &&
 		git config i18n.commitencoding $new &&
-		test_must_fail git rebase -m master &&
+		test_must_fail git rebase -m main &&
 		test -f .git/rebase-merge/message &&
 		git stripspace <.git/rebase-merge/message >two.t &&
 		git add two.t &&
t/t3435-rebase-gpg-sign.sh +2 -2
index 54120b09d6..aab2b3aab8 100755
@@ -46,7 +46,7 @@ test_expect_success 'setup: merge commit' '
 	test_commit fork-point &&
 	git switch -c side &&
 	test_commit three &&
-	git switch master &&
+	git switch main &&
 	git merge --no-ff side &&
 	git tag merged
 '
@@ -64,7 +64,7 @@ test_rebase_gpg_sign   false -i --no-gpg-sign --gpg-sign
 test_expect_failure 'rebase -p --no-gpg-sign override commit.gpgsign' '
 	git reset --hard merged &&
 	git config commit.gpgsign true &&
-	git rebase -p --no-gpg-sign --onto=one fork-point master &&
+	git rebase -p --no-gpg-sign --onto=one fork-point main &&
 	test_must_fail git verify-commit HEAD
 '
 
t/t3436-rebase-more-options.sh +1 -1
index eaaf4c8d1d..4d106642ba 100755
@@ -28,7 +28,7 @@ test_expect_success 'setup' '
 	test_commit commit2 foo foo2 &&
 	test_commit commit3 foo foo3 &&
 
-	git checkout --orphan master &&
+	git checkout --orphan main &&
 	rm foo &&
 	test_write_lines "line 1" "        line 2" "line 3" >file &&
 	git commit -am "add file" &&
t/test-lib.sh +7 -1
index c464f8dcc8..4ae87a5c4e 100644
@@ -257,7 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-[0-2]*|3[0-3]*)
+3404)
+	# Avoid conflicts with patch series that are cooking at the same time
+	# as the patch series changing the default of `init.defaultBranch`.
+	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
+	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+	;;
+[0-2]*|3[0-4]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget
#69 lore raw

PATCH v2 9/27 t5323: prepare centered comment for `master` -> `main`

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

We are about to search-and-replace all mentions of master in t5323 by main, which is two characters shorter. To prepare for that, let's add padding to centered lines that will make them briefly uncentered, but will be re-centered in the commit that performs that rename.

Doing it this way (instead of padding after replacing) makes it easier to verify the validity of the patch that replaces master by main.

---
 t/t5323-pack-redundant.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
t/t5323-pack-redundant.sh +3 -3
index 6b4d1ca353..3903148926 100755
@@ -312,7 +312,7 @@ test_expect_success 'shared: all packs are redundant, but no output without --al
 #############################################################################
 # Chart of packs and objects for this test case
 #
-#     ================ master.git ===============
+#     ================= master.git ================
 #         | T A B C D E F G H I J K L M N O P Q R  <----------+
 #     ----+--------------------------------------             |
 #     P1  | x x x x x x x                       x             |
@@ -394,7 +394,7 @@ test_expect_success 'shared: no redundant without --alt-odb' '
 #############################################################################
 # Chart of packs and objects for this test case
 #
-#     ================ master.git ===============
+#     ================= master.git ================
 #         | T A B C D E F G H I J K L M N O P Q R  <----------------+
 #     ----+--------------------------------------                   |
 #     P1  | x x x x x x x                       x                   |
@@ -426,7 +426,7 @@ test_expect_success 'shared: one pack is redundant with --alt-odb' '
 #############################################################################
 # Chart of packs and objects for this test case
 #
-#     ================ master.git ===============
+#     ================= master.git ================
 #         | T A B C D E F G H I J K L M N O P Q R  <----------------+
 #     ----+--------------------------------------                   |
 #     P1  | x x x x x x x                       x                   |
Signature · 1 line
gitgitgadget
#70 lore raw

PATCH v2 10/27 t5[0-4]*: adjust the references to the default branch name "main"

In reply to Johannes Schindelin via GitGitGadget

From: Johannes Schindelin <[email protected]>

Carefully excluding t5310, which is developed independently of the current patch series at the time of writing, we now use main as default branch in t5[0-4]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -- t5[0-4]*.sh &&
	   git checkout HEAD -- t5310\*)

This allows us to define GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for those tests.

---
 t/t5150-request-pull.sh                | 34 ++++++-------
 t/t5304-prune.sh                       |  2 +-
 t/t5305-include-tag.sh                 |  2 +-
 t/t5312-prune-corruption.sh            | 16 +++----
 t/t5317-pack-objects-filter-objects.sh |  2 +-
 t/t5322-pack-objects-sparse.sh         |  2 +-
 t/t5323-pack-redundant.sh              | 66 +++++++++++++-------------
 t/t5400-send-pack.sh                   | 60 +++++++++++------------
 t/t5401-update-hooks.sh                | 24 +++++-----
 t/t5402-post-merge-hook.sh             |  2 +-
 t/t5403-post-checkout-hook.sh          |  6 +--
 t/t5404-tracking-branches.sh           |  8 ++--
 t/t5405-send-pack-rewind.sh            |  6 +--
 t/t5407-post-rewrite-hook.sh           |  2 +-
 t/t5410-receive-pack-alternates.sh     |  4 +-
 t/test-lib.sh                          |  4 +-
 16 files changed, 120 insertions(+), 120 deletions(-)
t/t5150-request-pull.sh +17 -17
index c1811ea0f4..4fa71961a6 100755
@@ -31,13 +31,13 @@ test_expect_success 'setup' '
 		test_tick &&
 		git commit -m "\"Thirty days\", a reminder of month lengths" &&
 		git tag -m "version 1" -a initial &&
-		git push --tags origin master
+		git push --tags origin main
 	) &&
 	(
 		cd local &&
 		git remote add upstream "$trash_url/upstream.git" &&
 		git fetch upstream &&
-		git pull upstream master &&
+		git pull upstream main &&
 		cat <<-\EOT >>mnemonic.txt &&
 		Of twyecescore-eightt is but eine,
 		And all the remnante be thrycescore-eine.
@@ -59,7 +59,7 @@ test_expect_success 'setup' '
 		git commit -a -m "Adapt to use modern, simpler English
 
 But keep the old version, too, in case some people prefer it." &&
-		git checkout master
+		git checkout main
 	)
 
 '
@@ -129,7 +129,7 @@ test_expect_success 'pull request when forgot to push' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
+		git merge --ff-only main &&
 		test_must_fail git request-pull initial "$downstream_url" \
 			2>../err
 	) &&
@@ -145,9 +145,9 @@ test_expect_success 'pull request after push' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
-		git push origin master:for-upstream &&
-		git request-pull initial origin master:for-upstream >../request
+		git merge --ff-only main &&
+		git push origin main:for-upstream &&
+		git request-pull initial origin main:for-upstream >../request
 	) &&
 	sed -nf read-request.sed <request >digest &&
 	{
@@ -172,9 +172,9 @@ test_expect_success 'request asks HEAD to be pulled' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
-		git push --tags origin master simplify &&
-		git push origin master:for-upstream &&
+		git merge --ff-only main &&
+		git push --tags origin main simplify &&
+		git push origin main:for-upstream &&
 		git request-pull initial "$downstream_url" >../request
 	) &&
 	sed -nf read-request.sed <request >digest &&
@@ -215,7 +215,7 @@ test_expect_success 'pull request format' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
+		git merge --ff-only main &&
 		git push origin tags/full &&
 		git request-pull initial "$downstream_url" tags/full >../request
 	) &&
@@ -243,9 +243,9 @@ test_expect_success 'request-pull ignores OPTIONS_KEEPDASHDASH poison' '
 		OPTIONS_KEEPDASHDASH=Yes &&
 		export OPTIONS_KEEPDASHDASH &&
 		git checkout initial &&
-		git merge --ff-only master &&
-		git push origin master:for-upstream &&
-		git request-pull -- initial "$downstream_url" master:for-upstream >../request
+		git merge --ff-only main &&
+		git push origin main:for-upstream &&
+		git request-pull -- initial "$downstream_url" main:for-upstream >../request
 	)
 
 '
@@ -257,7 +257,7 @@ test_expect_success 'request-pull quotes regex metacharacters properly' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
+		git merge --ff-only main &&
 		git tag -mrelease v2.0 &&
 		git push origin refs/tags/v2.0:refs/tags/v2-0 &&
 		test_must_fail git request-pull initial "$downstream_url" tags/v2.0 \
@@ -275,7 +275,7 @@ test_expect_success 'pull request with mismatched object' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
+		git merge --ff-only main &&
 		git push origin HEAD:refs/tags/full &&
 		test_must_fail git request-pull initial "$downstream_url" tags/full \
 			2>../err
@@ -292,7 +292,7 @@ test_expect_success 'pull request with stale object' '
 	(
 		cd local &&
 		git checkout initial &&
-		git merge --ff-only master &&
+		git merge --ff-only main &&
 		git push origin refs/tags/full &&
 		git tag -f -m"Thirty-one days" full &&
 		test_must_fail git request-pull initial "$downstream_url" tags/full \
t/t5304-prune.sh +1 -1
index df60f18fb8..7391f95c7e 100755
@@ -119,7 +119,7 @@ test_expect_success 'prune: do not prune detached HEAD with no reflog' '
 test_expect_success 'prune: prune former HEAD after checking out branch' '
 
 	head_oid=$(git rev-parse HEAD) &&
-	git checkout --quiet master &&
+	git checkout --quiet main &&
 	git prune -v >prune_actual &&
 	grep "$head_oid" prune_actual
 
t/t5305-include-tag.sh +1 -1
index a5eca210b8..69233574b8 100755
@@ -111,7 +111,7 @@ test_expect_success 'check unpacked result (have all objects)' '
 
 test_expect_success 'single-branch clone can transfer tag' '
 	rm -rf clone.git &&
-	git clone --no-local --single-branch -b master . clone.git &&
+	git clone --no-local --single-branch -b main . clone.git &&
 	git -C clone.git fsck
 '
 
t/t5312-prune-corruption.sh +8 -8
index da9d59940d..8ca3823f23 100755
@@ -16,7 +16,7 @@ test_expect_success 'disable reflogs' '
 '
 
 test_expect_success 'create history reachable only from a bogus-named ref' '
-	test_tick && git commit --allow-empty -m master &&
+	test_tick && git commit --allow-empty -m main &&
 	base=$(git rev-parse HEAD) &&
 	test_tick && git commit --allow-empty -m bogus &&
 	bogus=$(git rev-parse HEAD) &&
@@ -51,7 +51,7 @@ test_expect_success 'clean up bogus ref' '
 '
 
 # We create two new objects here, "one" and "two". Our
-# master branch points to "two", which is deleted,
+# main branch points to "two", which is deleted,
 # corrupting the repository. But we'd like to make sure
 # that the otherwise unreachable "one" is not pruned
 # (since it is the user's best bet for recovering
@@ -81,7 +81,7 @@ test_expect_success 'pruning with a corrupted tip does not drop history' '
 test_expect_success 'pack-refs does not silently delete broken loose ref' '
 	git pack-refs --all --prune &&
 	echo $missing >expect &&
-	git rev-parse refs/heads/master >actual &&
+	git rev-parse refs/heads/main >actual &&
 	test_cmp expect actual
 '
 
@@ -89,25 +89,25 @@ test_expect_success 'pack-refs does not silently delete broken loose ref' '
 # actually pack it, as it is perfectly reasonable to
 # skip processing a broken ref
 test_expect_success 'create packed-refs file with broken ref' '
-	rm -f .git/refs/heads/master &&
+	rm -f .git/refs/heads/main &&
 	cat >.git/packed-refs <<-EOF &&
-	$missing refs/heads/master
+	$missing refs/heads/main
 	$recoverable refs/heads/other
 	EOF
 	echo $missing >expect &&
-	git rev-parse refs/heads/master >actual &&
+	git rev-parse refs/heads/main >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'pack-refs does not silently delete broken packed ref' '
 	git pack-refs --all --prune &&
-	git rev-parse refs/heads/master >actual &&
+	git rev-parse refs/heads/main >actual &&
 	test_cmp expect actual
 '
 
 test_expect_success 'pack-refs does not drop broken refs during deletion' '
 	git update-ref -d refs/heads/other &&
-	git rev-parse refs/heads/master >actual &&
+	git rev-parse refs/heads/main >actual &&
 	test_cmp expect actual
 '
 
t/t5317-pack-objects-filter-objects.sh +1 -1
index dc0446574b..6ee66d58ce 100755
@@ -382,7 +382,7 @@ test_expect_success 'verify sparse:oid=oid-ish' '
 	awk -f print_2.awk ls_files_result |
 	sort >expected &&
 
-	git -C r4 pack-objects --revs --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF &&
+	git -C r4 pack-objects --revs --stdout --filter=sparse:oid=main:pattern >filter.pack <<-EOF &&
 	HEAD
 	EOF
 	git -C r4 index-pack ../filter.pack &&
t/t5322-pack-objects-sparse.sh +1 -1
index a581eaf529..99bdab0610 100755
@@ -18,7 +18,7 @@ test_expect_success 'setup repo' '
 	git commit -m "Initialized trees" &&
 	for i in $(test_seq 1 3)
 	do
-		git checkout -b topic$i master &&
+		git checkout -b topic$i main &&
 		echo change-$i >f$i/f$i/data.txt &&
 		git commit -a -m "Changed f$i/f$i/data.txt"
 	done &&
t/t5323-pack-redundant.sh +33 -33

202 lines not on this page · raw message

t/t5400-send-pack.sh +30 -30

146 lines not on this page · raw message

t/t5401-update-hooks.sh +12 -12
index 956d69f5b1..6012cc8172 100755
@@ -15,11 +15,11 @@ test_expect_success setup '
 	git update-index a &&
 	tree1=$(git write-tree) &&
 	commit1=$(echo modify | git commit-tree $tree1 -p $commit0) &&
-	git update-ref refs/heads/master $commit0 &&
+	git update-ref refs/heads/main $commit0 &&
 	git update-ref refs/heads/tofail $commit1 &&
 	git clone --bare ./. victim.git &&
 	GIT_DIR=victim.git git update-ref refs/heads/tofail $commit1 &&
-	git update-ref refs/heads/master $commit1 &&
+	git update-ref refs/heads/main $commit1 &&
 	git update-ref refs/heads/tofail $commit0
 '
 
@@ -38,7 +38,7 @@ echo "$@" >>$GIT_DIR/update.args
 read x; printf %s "$x" >$GIT_DIR/update.stdin
 echo STDOUT update $1
 echo STDERR update $1 >&2
-test "$1" = refs/heads/master || exit
+test "$1" = refs/heads/main || exit
 EOF
 chmod u+x victim.git/hooks/update
 
@@ -62,11 +62,11 @@ chmod u+x victim.git/hooks/post-update
 
 test_expect_success push '
 	test_must_fail git send-pack --force ./victim.git \
-		master tofail >send.out 2>send.err
+		main tofail >send.out 2>send.err
 '
 
 test_expect_success 'updated as expected' '
-	test $(GIT_DIR=victim.git git rev-parse master) = $commit1 &&
+	test $(GIT_DIR=victim.git git rev-parse main) = $commit1 &&
 	test $(GIT_DIR=victim.git git rev-parse tofail) = $commit1
 '
 
@@ -82,24 +82,24 @@ test_expect_success 'hooks ran' '
 '
 
 test_expect_success 'pre-receive hook input' '
-	(echo $commit0 $commit1 refs/heads/master &&
+	(echo $commit0 $commit1 refs/heads/main &&
 	 echo $commit1 $commit0 refs/heads/tofail
 	) | test_cmp - victim.git/pre-receive.stdin
 '
 
 test_expect_success 'update hook arguments' '
-	(echo refs/heads/master $commit0 $commit1 &&
+	(echo refs/heads/main $commit0 $commit1 &&
 	 echo refs/heads/tofail $commit1 $commit0
 	) | test_cmp - victim.git/update.args
 '
 
 test_expect_success 'post-receive hook input' '
-	echo $commit0 $commit1 refs/heads/master |
+	echo $commit0 $commit1 refs/heads/main |
 	test_cmp - victim.git/post-receive.stdin
 '
 
 test_expect_success 'post-update hook arguments' '
-	echo refs/heads/master |
+	echo refs/heads/main |
 	test_cmp - victim.git/post-update.args
 '
 
@@ -120,8 +120,8 @@ test_expect_success 'send-pack produced no output' '
 cat <<EOF >expect
 remote: STDOUT pre-receive
 remote: STDERR pre-receive
-remote: STDOUT update refs/heads/master
-remote: STDERR update refs/heads/master
+remote: STDOUT update refs/heads/main
+remote: STDERR update refs/heads/main
 remote: STDOUT update refs/heads/tofail
 remote: STDERR update refs/heads/tofail
 remote: error: hook declined to update refs/heads/tofail
@@ -143,7 +143,7 @@ test_expect_success 'pre-receive hook that forgets to read its input' '
 
 	for v in $(test_seq 100 999)
 	do
-		git branch branch_$v master || return
+		git branch branch_$v main || return
 	done &&
 	git push ./victim.git "+refs/heads/*:refs/heads/*"
 '
t/t5402-post-merge-hook.sh +1 -1
index 4aeea8f5b7..26c800e60b 100755
@@ -15,7 +15,7 @@ test_expect_success setup '
 	git update-index a &&
 	tree1=$(git write-tree) &&
 	commit1=$(echo modify | git commit-tree $tree1 -p $commit0) &&
-	git update-ref refs/heads/master $commit0 &&
+	git update-ref refs/heads/main $commit0 &&
 	git clone ./. clone1 &&
 	GIT_DIR=clone1/.git git update-index --add a &&
 	git clone ./. clone2 &&
t/t5403-post-checkout-hook.sh +3 -3
index a39b3b5c78..867dec8862 100755
@@ -20,7 +20,7 @@ test_expect_success setup '
 
 test_expect_success 'post-checkout receives the right arguments with HEAD unchanged ' '
 	test_when_finished "rm -f .git/post-checkout.args" &&
-	git checkout master &&
+	git checkout main &&
 	read old new flag <.git/post-checkout.args &&
 	test $old = $new && test $flag = 1
 '
@@ -41,14 +41,14 @@ test_expect_success 'post-checkout receives the right args with HEAD changed ' '
 
 test_expect_success 'post-checkout receives the right args when not switching branches ' '
 	test_when_finished "rm -f .git/post-checkout.args" &&
-	git checkout master -- three.t &&
+	git checkout main -- three.t &&
 	read old new flag <.git/post-checkout.args &&
 	test $old = $new && test $flag = 0
 '
 
 test_expect_success 'post-checkout is triggered on rebase' '
 	test_when_finished "rm -f .git/post-checkout.args" &&
-	git checkout -b rebase-test master &&
+	git checkout -b rebase-test main &&
 	rm -f .git/post-checkout.args &&
 	git rebase rebase-on-me &&
 	read old new flag <.git/post-checkout.args &&
t/t5404-tracking-branches.sh +4 -4
index 2762f420bc..83751e68d0 100755
@@ -30,9 +30,9 @@ test_expect_success 'prepare pushable branches' '
 	git checkout -b b2 origin/b2 &&
 	echo aa-b2 >>file &&
 	git commit -a -m aa-b2 &&
-	git checkout master &&
-	echo aa-master >>file &&
-	git commit -a -m aa-master
+	git checkout main &&
+	echo aa-main >>file &&
+	git commit -a -m aa-main
 '
 
 test_expect_success 'mixed-success push returns error' '
@@ -40,7 +40,7 @@ test_expect_success 'mixed-success push returns error' '
 '
 
 test_expect_success 'check tracking branches updated correctly after push' '
-	test "$(git rev-parse origin/master)" = "$(git rev-parse master)"
+	test "$(git rev-parse origin/main)" = "$(git rev-parse main)"
 '
 
 test_expect_success 'check tracking branches not updated for failed refs' '
t/t5405-send-pack-rewind.sh +3 -3
index 235fb7686a..8792e74682 100755
@@ -13,7 +13,7 @@ test_expect_success setup '
 	mkdir another && (
 		cd another &&
 		git init &&
-		git fetch --update-head-ok .. master:master
+		git fetch --update-head-ok .. main:main
 	) &&
 
 	>file2 && git add file2 && test_tick &&
@@ -25,7 +25,7 @@ test_expect_success 'non forced push should die not segfault' '
 
 	(
 		cd another &&
-		test_must_fail git push .. master:master
+		test_must_fail git push .. main:main
 	)
 
 '
@@ -34,7 +34,7 @@ test_expect_success 'forced push should succeed' '
 
 	(
 		cd another &&
-		git push .. +master:master
+		git push .. +main:main
 	)
 
 '
t/t5407-post-rewrite-hook.sh +1 -1
index 80750a817e..27bc159acf 100755
@@ -14,7 +14,7 @@ test_expect_success 'setup' '
 	git checkout A^0 &&
 	test_commit E bar E &&
 	test_commit F foo F &&
-	git checkout master
+	git checkout main
 '
 
 mkdir .git/hooks
t/t5410-receive-pack-alternates.sh +2 -2
index f00d0da860..cb6fffe611 100755
@@ -7,9 +7,9 @@ test_description='git receive-pack with alternate ref filtering'
 test_expect_success 'setup' '
 	test_commit base &&
 	git clone -s --bare . fork &&
-	git checkout -b public/branch master &&
+	git checkout -b public/branch main &&
 	test_commit public &&
-	git checkout -b private/branch master &&
+	git checkout -b private/branch main &&
 	test_commit private
 '
 
t/test-lib.sh +2 -2
index b783629348..155bfad454 100644
@@ -257,13 +257,13 @@ case "$TRASH_DIRECTORY" in
 esac
 
 case "$TEST_NUMBER" in
-3404|4013)
+3404|4013|5310)
 	# Avoid conflicts with patch series that are cooking at the same time
 	# as the patch series changing the default of `init.defaultBranch`.
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
-[0-4]*)
+[0-4]*|5[0-4]*)
 	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
 	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
 	;;
Signature · 1 line
gitgitgadget