ld.so.8: outline missed cases of secure run
PATCH 1/1 ld.so.8: outline missed cases of secure run
Hello,
For the purpose of security many ld.so options(e.g. --inhibit-rpath, LD_LIBRARY_PATH and others) are disabled for secure types of programs. Current ld.so man page mentions them as set-user-ID/set-group-ID binaries. However according to GNU libc sources there could be other cases where __libc_enable_secure is set to non-zero -- when AT_SECURE value is set in auxiliary vector:
elf/dl-sysdep.c:148
case AT_SECURE:
#ifndef HAVE_AUX_SECURE
seen = -1;
#endif
__libc_enable_secure = av->a_un.a_val;So I suggest ld.so man page should reflect this. The man3/getauxval.3 page already covers this.
Proposed patch is below. Maybe it also worth mentioning the particular case of binary files with capabilities as it's done on getauxval.3 page.
man8/ld.so.8 +1 -2
@@ -62,8 +62,8 @@ Use of DT_RPATH is deprecated. .IP o Using the environment variable .BR LD_LIBRARY_PATH . -Except if the executable is a set-user-ID/set-group-ID binary, -in which case it is ignored. +Except if the executable is a set-user-ID/set-group-ID binary or has a
non-zero
+AT_SECURE value in auxiliary vector, in which cases it is ignored.
.IP o
(ELF only) Using the directories specified in the
DT_RUNPATH dynamic section attribute
@@ -168,7 +168,8 @@ Ignore RPATH and RUNPATH information in object names in
.IR list .
This option is ignored if
.B ld.so
-is set-user-ID or set-group-ID.
+is set-user-ID or set-group-ID or has a non-zero AT_SECURE value +in auxiliary vector.
.TP
.BI \-\-audit " list"
Use objects named in
@@ -235,7 +236,8 @@ The items in the list are separated by either colons or semicolons.
Similar to the
.B PATH
environment variable.
-Ignored in set-user-ID and set-group-ID programs.
+Ignored in set-user-ID and set-group-ID programs and programs with a non-zero
+AT_SECURE value in auxiliary vector.
.TP
.B LD_PRELOAD
A list of additional, user-specified, ELF shared
@@ -243,7 +245,8 @@ objects to be loaded before all others.
The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION.
-For set-user-ID/set-group-ID ELF binaries,
+For set-user-ID/set-group-ID ELF binaries
+or programs with a non-zero AT_SECURE value in auxiliary vector,
preload pathnames containing slashes are ignored,
and shared objects in the standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
@@ -282,7 +285,8 @@ to be loaded before all others in a separate linker namespace
would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .B LD_AUDIT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
The dynamic linker will notify the audit
shared objects at so-called auditing checkpoints\(emfor example,
@@ -313,7 +317,8 @@ prints a help message about which categories can be specified in this
environment variable.
Since glibc 2.3.4,
.B LD_DEBUG
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
.TP
.B LD_DEBUG_OUTPUT
(glibc since 2.1)
@@ -322,14 +327,16 @@ File in which
output should be written.
The default is standard error.
.B LD_DEBUG_OUTPUT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
.TP
.B LD_DYNAMIC_WEAK
(glibc since 2.1.91)
Allow weak symbols to be overridden (reverting to old glibc behavior). For security reasons, since glibc 2.3.4,
.B LD_DYNAMIC_WEAK
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
.TP
.B LD_HWCAP_MASK
(glibc since 2.1)
@@ -350,7 +357,8 @@ version numbers.
Path where the binary is found (for non-set-user-ID programs). For security reasons, since glibc 2.4,
.B LD_ORIGIN_PATH
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
.\" Only used if $ORIGIN can't be determined by normal means .\" (from the origin path saved at load time, or from /proc/self/exe)? .TP
@@ -382,7 +390,8 @@ If this variable is not defined, or is defined as an empty string,
then the default is
.IR /var/tmp .
.B LD_PROFILE_OUTPUT
-is ignored for set-user-ID and set-group-ID programs,
+is ignored for set-user-ID and set-group-ID programs and programs with +a non-zero AT_SECURE value in auxiliary vector,
which always use
.IR /var/profile .
.TP
@@ -391,7 +400,8 @@ which always use
Show auxiliary array passed up from the kernel.
For security reasons, since glibc 2.3.5,
.B LD_SHOW_AUXV
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector.
.TP
.B LD_TRACE_PRELINKING
(glibc since 2.4)
@@ -421,7 +431,8 @@ If
.B LD_USE_LOAD_BIAS
is defined with the value 0,
neither executables nor PIEs will honor the base addresses.
-This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored by set-user-ID and set-group-ID programs and +programs with a non-zero AT_SECURE value in auxiliary vector.
.TP
.B LD_VERBOSE
(glibc since 2.1)
Regards,
Maria
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · Maria Guseva
Hello,
For the purpose of security many ld.so options(e.g. --inhibit-rpath,
LD_LIBRARY_PATHand others) are disabled for secure types of programs. Current ld.so man page mentions them as set-user-ID/set-group-ID binaries. However according to GNU libc sources there could be other cases where__libc_enable_secureis set to non-zero -- whenAT_SECUREvalue is set in auxiliary vector:
While at it, could you also mention that /etc/suid-debug enables LD_DEBUG for suids?
Best regards,
Yury Gribov
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Yury,
Quoted 12 lines · Yury Gribov
Quoted 9 lines · Maria Guseva
Hello,
For the purpose of security many ld.so options(e.g. --inhibit-rpath,
LD_LIBRARY_PATHand others) are disabled for secure types of programs. Current ld.so man page mentions them as set-user-ID/set-group-ID binaries. However according to GNU libc sources there could be other cases where__libc_enable_secureis set to non-zero -- whenAT_SECUREvalue is set in auxiliary vector:
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?
Does it? I can't see that in the glibc source. Am I missing something?
Cheers,
Michael
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): CAKgNAkjgs9rBz8MvgMW1Xts95nBo433RAvoyOZFKuU6cDFO_zg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 15 lines · Michael Kerrisk (man-pages)
Yury,
Quoted 12 lines · Yury Gribov
Quoted 9 lines · Maria Guseva
Hello,
For the purpose of security many ld.so options(e.g. --inhibit-rpath,
LD_LIBRARY_PATHand others) are disabled for secure types of programs. Current ld.so man page mentions them as set-user-ID/set-group-ID binaries. However according to GNU libc sources there could be other cases where__libc_enable_secureis set to non-zero -- whenAT_SECUREvalue is set in auxiliary vector:
Quoted 4 lines
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?Does it? I can't see that in the glibc source. Am I missing something?
I was looking at process_envvars (in rtld.c): it resets dl_debug_mask for AT_SECURE binaries unless /etc/suid-debug exists.
-Y
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Maria,
Quoted 11 lines · Maria Guseva
Hello,
For the purpose of security many ld.so options(e.g. --inhibit-rpath,
LD_LIBRARY_PATHand others) are disabled for secure types of programs. Current ld.so man page mentions them as set-user-ID/set-group-ID binaries. However according to GNU libc sources there could be other cases where__libc_enable_secureis set to non-zero -- whenAT_SECUREvalue is set in auxiliary vector:
elf/dl-sysdep.c:148
caseAT_SECURE:
Quoted 8 lines
#ifndef HAVE_AUX_SECURE seen = -1; #endif __libc_enable_secure = av->a_un.a_val;So I suggest ld.so man page should reflect this. The man3/getauxval.3 page already covers this.
Thanks for raising this!
Quoted 124 lines
Proposed patch is below. Maybe it also worth mentioning the particular case of binary files with capabilities as it's done on getauxval.3 page.
man8/ld.so.8 +1
-2@@ -62,8 +62,8 @@ Use of DT_RPATH is deprecated. .IP o Using the environment variable .BR LD_LIBRARY_PATH . -Except if the executable is a set-user-ID/set-group-ID binary, -in which case it is ignored. +Except if the executable is a set-user-ID/set-group-ID binary or has anon-zero
man8/ld.so.8 +3
-1+AT_SECURE value in auxiliary vector, in which cases it is ignored. .IP o (ELF only) Using the directories specified in the DT_RUNPATH dynamic section attribute@@ -168,7 +168,8 @@ Ignore RPATH and RUNPATH information in object names in .IR list . This option is ignored if .B ld.so -is set-user-ID or set-group-ID. +is set-user-ID or set-group-ID or has a non-zero AT_SECURE value +in auxiliary vector. .TP .BI \-\-audit " list" Use objects named in@@ -235,7 +236,8 @@ The items in the list are separated by either colons orsemicolons.
Similar to the
.B PATH
environment variable.man8/ld.so.8 +1
-1-Ignored in set-user-ID and set-group-ID programs. +Ignored in set-user-ID and set-group-ID programs and programs with anon-zero
man8/ld.so.8 +3
-1+AT_SECURE value in auxiliary vector. .TP .B LD_PRELOAD A list of additional, user-specified, ELF shared@@ -243,7 +245,8 @@ objects to be loaded before all others. The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION. -For set-user-ID/set-group-ID ELF binaries, +For set-user-ID/set-group-ID ELF binaries +or programs with a non-zero AT_SECURE value in auxiliary vector, preload pathnames containing slashes are ignored, and shared objects in the standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.@@ -282,7 +285,8 @@ to be loaded before all others in a separate linkernamespace
would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .BLD_AUDITman8/ld.so.8 +2
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. The dynamic linker will notify the audit shared objects at so-called auditing checkpoints\(emfor example,@@ -313,7 +317,8 @@ prints a help message about which categories can bespecified in this
environment variable.
Since glibc 2.3.4,
.BLD_DEBUGman8/ld.so.8 +10
-5-is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. .TP .B LD_DEBUG_OUTPUT (glibc since 2.1)@@ -322,14 +327,16 @@ File in which output should be written. The default is standard error. .B LD_DEBUG_OUTPUT -is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. .TP .B LD_DYNAMIC_WEAK (glibc since 2.1.91) Allow weak symbols to be overridden (reverting to old glibc behavior). For security reasons, since glibc 2.3.4, .B LD_DYNAMIC_WEAK -is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. .TP .B LD_HWCAP_MASK (glibc since 2.1)@@ -350,7 +357,8 @@ version numbers. Path where the binary is found (for non-set-user-ID programs). For security reasons, since glibc 2.4, .B LD_ORIGIN_PATH -is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. .\" Only used if $ORIGIN can't be determined by normal means .\" (from the origin path saved at load time, or from /proc/self/exe)? .TP@@ -382,7 +390,8 @@ If this variable is not defined, or is defined as an empty string, then the default is .IR /var/tmp . .B LD_PROFILE_OUTPUT -is ignored for set-user-ID and set-group-ID programs, +is ignored for set-user-ID and set-group-ID programs and programs with +a non-zero AT_SECURE value in auxiliary vector, which always use .IR /var/profile ..TP
man8/ld.so.8 +2
-1@@ -391,7 +400,8 @@ which always use Show auxiliary array passed up from the kernel. For security reasons, since glibc 2.3.5, .B LD_SHOW_AUXV -is ignored for set-user-ID/set-group-ID binaries. +is ignored for set-user-ID/set-group-ID binaries and programs with +a non-zero AT_SECURE value in auxiliary vector. .TP .B LD_TRACE_PRELINKING (glibc since 2.4)
man8/ld.so.8 If · line 438
Quoted 9 lines
man8/ld.so.8 +2
-1@@ -421,7 +431,8 @@ If .B LD_USE_LOAD_BIAS is defined with the value 0, neither executables nor PIEs will honor the base addresses. -This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored by set-user-ID and set-group-ID programs and +programs with a non-zero AT_SECURE value in auxiliary vector. .TP .B LD_VERBOSE (glibc since 2.1)
I think the idea behind the patch is sound, but (1) a little more detail is needed (2) the formulation above suggests that AT_SECURE != 0 is a separate thing from set-UID/set-GID programs, when in fact executing set-UID/set-GID programs is the most common case where AT_SECURE is set, and (3) AT_SECURE can be set by other means.
What do you think of the alternative patch below?
Thanks,
Michael
man8/ld.so.8 +42 -18
@@ -61,8 +61,8 @@ of the binary if present and DT_RUNPATH attribute does not exist. Use of DT_RPATH is deprecated. .IP o Using the environment variable -.BR LD_LIBRARY_PATH . -Except if the executable is a set-user-ID/set-group-ID binary, +.BR LD_LIBRARY_PATH +(unless the executable is being run in secure-execution mode; see below). in which case it is ignored. .IP o (ELF only) Using the directories specified in the
@@ -166,15 +166,38 @@ environment variable setting (see below). .BI \-\-inhibit\-rpath " list" Ignore RPATH and RUNPATH information in object names in .IR list . -This option is ignored if -.B ld.so -is set-user-ID or set-group-ID. +This option is ignored if when running in secure-execution mode (see below). .TP .BI \-\-audit " list" Use objects named in .I list as auditors. .SH ENVIRONMENT +Various environment variable influence the operation of the dynamic linker. +.\" +.SS Secure-execution mode +For security reasons, +the effects of some environment variables are voided or modified if +the dynamic linker determines that the binary should be +run in secure-execution mode. +This determination is made by checking whether the +.B AT_SECURE +entry in the auxiliary vector (see +.BR getauxval (3)) +has a nonzero value. +This entry may have a nonzero value for various reasons, including: +.IP * 3 +The process's real and effective user IDs differ, +or the real and effective group IDs differ. +This typically occurs as a result of executing +a set-user-ID or set-group-ID program. +.IP * +A process with a non-root user ID executed a binary that +conferred permitted or effective capabilities. +.IP * +A nonzero value may have been set by a Linux Security Module. +.\" +.SS Environment variables Among the more important environment variables are the following: .TP .B LD_ASSUME_KERNEL
@@ -235,7 +258,7 @@ The items in the list are separated by either colons or semicolons. Similar to the .B PATH environment variable. -Ignored in set-user-ID and set-group-ID programs. +This variable is ignore in secure-execution mode. .TP .B LD_PRELOAD A list of additional, user-specified, ELF shared
@@ -243,7 +266,7 @@ objects to be loaded before all others. The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION. -For set-user-ID/set-group-ID ELF binaries, +In secure-execution mode, preload pathnames containing slashes are ignored, and shared objects in the standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
@@ -282,7 +305,7 @@ to be loaded before all others in a separate linker namespace would occur in the process). These objects can be used to audit the operation of the dynamic linker. .B LD_AUDIT -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. The dynamic linker will notify the audit shared objects at so-called auditing checkpoints\(emfor example,
@@ -313,7 +336,7 @@ prints a help message about which categories can be specified in this environment variable. Since glibc 2.3.4, .B LD_DEBUG -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_DEBUG_OUTPUT (glibc since 2.1)
@@ -322,14 +345,14 @@ File in which output should be written. The default is standard error. .B LD_DEBUG_OUTPUT -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_DYNAMIC_WEAK (glibc since 2.1.91) Allow weak symbols to be overridden (reverting to old glibc behavior). -For security reasons, since glibc 2.3.4, +Since glibc 2.3.4, .B LD_DYNAMIC_WEAK -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_HWCAP_MASK (glibc since 2.1)
@@ -348,9 +371,9 @@ version numbers. .B LD_ORIGIN_PATH (glibc since 2.1) Path where the binary is found (for non-set-user-ID programs). -For security reasons, since glibc 2.4, +Since glibc 2.4, .B LD_ORIGIN_PATH -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .\" Only used if $ORIGIN can't be determined by normal means .\" (from the origin path saved at load time, or from /proc/self/exe)? .TP
@@ -382,16 +405,16 @@ If this variable is not defined, or is defined as an empty string, then the default is .IR /var/tmp . .B LD_PROFILE_OUTPUT -is ignored for set-user-ID and set-group-ID programs, +is ignored in secure-execution mode. which always use .IR /var/profile . .TP .B LD_SHOW_AUXV (glibc since 2.1) Show auxiliary array passed up from the kernel. -For security reasons, since glibc 2.3.5, +Since glibc 2.3.5, .B LD_SHOW_AUXV -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_TRACE_PRELINKING (glibc since 2.4)
@@ -421,7 +444,7 @@ If .B LD_USE_LOAD_BIAS is defined with the value 0, neither executables nor PIEs will honor the base addresses. -This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored in secure-execution mode. .TP .B LD_VERBOSE (glibc since 2.1)
@@ -507,6 +530,7 @@ mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm .BR sprof (1), .BR dlopen (3), .BR getauxval (3), +.BR capabilities (7), .BR rtld-audit (7), .BR ldconfig (8), .BR sln (8)
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello Michael, Yury
Quoted 1 line
What do you think of the alternative patch below?
Thank you, the patch you proposed looks much better.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?Does it? I can't see that in the glibc source. Am I missing something?
I was looking at
process_envvars(inrtld.c): it resetsdl_debug_maskfor
AT_SECURE binaries unless /etc/suid-debug exists.
So I think it should mentioned in LD_DEBUG environment variable description, here:
.B LD_DEBUG
-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file
+.IR /etc/suid\-debug
+exists (the content of the file is irrelevant), then +.BR LD_DEBUG
+has an effect in secure-execution mode.
.TP
Regards,
Maria
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Ping.
On 09/22/2015 11:58 AM, Maria Guseva wrote:
Hello Michael, Yury
Quoted 1 line
What do you think of the alternative patch below?
Thank you, the patch you proposed looks much better.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?Does it? I can't see that in the glibc source. Am I missing something?
I was looking at
process_envvars(inrtld.c): it resetsdl_debug_maskfor
AT_SECURE binaries unless /etc/suid-debug exists.
So I think it should mentioned in LD_DEBUG environment variable description, here:
.B LD_DEBUG
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
+However, if the file
+.IR /etc/suid\-debug
+exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode.
.TP
Regards,
Maria
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/1 ld.so.8: outline missed cases of secure run
In reply to Michael Kerrisk (man-pages)Gentle ping.
Quoted 15 lines
Ping.
On 09/22/2015 11:58 AM, Maria Guseva wrote:
Hello Michael, Yury
Quoted 1 line
What do you think of the alternative patch below?
Thank you, the patch you proposed looks much better.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?Does it? I can't see that in the glibc source. Am I missing something?
I was looking at
process_envvars(inrtld.c): it resetsdl_debug_maskfor
AT_SECURE binaries unless /etc/suid-debug exists.
Quoted 1 line
So I think it should mentioned in
LD_DEBUGenvironment variable
description, here:
Quoted 8 lines
.B
LD_DEBUG(quoted diff) +5
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file +.IR /etc/suid\-debug +exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode..TP
So find the final patch below:
man8/ld.so.8 +0 -0
@@ -61,8 +61,8 @@ of the binary if present and DT_RUNPATH attribute does not
exist.
Use of DT_RPATH is deprecated.
.IP o
Using the environment variable
-.BR LD_LIBRARY_PATH .
-Except if the executable is a set-user-ID/set-group-ID binary, +.BR LD_LIBRARY_PATH
+(unless the executable is being run in secure-execution mode; see below).
in which case it is ignored.
.IP o
(ELF only) Using the directories specified in the @@ -166,15 +166,38 @@
environment variable setting (see below).
.BI \-\-inhibit\-rpath " list"
Ignore RPATH and RUNPATH information in object names in .IR list .
-This option is ignored if
-.B ld.so
-is set-user-ID or set-group-ID.
+This option is ignored if when running in secure-execution mode (see below).
.TP
.BI \-\-audit " list"
Use objects named in
.I list
as auditors.
.SH ENVIRONMENT
+Various environment variable influence the operation of the dynamic linker. +.\"
+.SS Secure-execution mode
+For security reasons,
+the effects of some environment variables are voided or modified if the +dynamic linker determines that the binary should be run in +secure-execution mode.
+This determination is made by checking whether the .B AT_SECURE entry +in the auxiliary vector (see .BR getauxval (3)) has a nonzero value. +This entry may have a nonzero value for various reasons, including:
+.IP * 3
+The process's real and effective user IDs differ, or the real and +effective group IDs differ.
+This typically occurs as a result of executing a set-user-ID or +set-group-ID program.
+.IP *
+A process with a non-root user ID executed a binary that conferred +permitted or effective capabilities.
+.IP *
+A nonzero value may have been set by a Linux Security Module. +.\"
+.SS Environment variables
Among the more important environment variables are the following:
.TP
.B LD_ASSUME_KERNEL
@@ -235,7 +258,7 @@ The items in the list are separated by either colons or semicolons.
Similar to the
.B PATH
environment variable.
-Ignored in set-user-ID and set-group-ID programs.
+This variable is ignore in secure-execution mode.
.TP
.B LD_PRELOAD
A list of additional, user-specified, ELF shared @@ -243,7 +266,7 @@
objects to be loaded before all others.
The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION.
-For set-user-ID/set-group-ID ELF binaries,
+In secure-execution mode,
preload pathnames containing slashes are ignored, and shared objects in
the standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
@@ -282,7 +305,7 @@ to be loaded before all others in a separate linker namespace would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .B LD_AUDIT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
The dynamic linker will notify the audit shared objects at so-called
auditing checkpoints\(emfor example, @@ -313,7 +336,7 @@ prints a help message about which categories can be specified in this environment variable.
Since glibc 2.3.4,
.B LD_DEBUG
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
+However, if the file
+.IR /etc/suid\-debug
+exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode.
.TP
.B LD_DEBUG_OUTPUT
(glibc since 2.1)
@@ -322,14 +345,14 @@ File in which
output should be written.
The default is standard error.
.B LD_DEBUG_OUTPUT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_DYNAMIC_WEAK
(glibc since 2.1.91)
Allow weak symbols to be overridden (reverting to old glibc behavior).
-For security reasons, since glibc 2.3.4,
+Since glibc 2.3.4,
.B LD_DYNAMIC_WEAK
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_HWCAP_MASK
(glibc since 2.1)
@@ -348,9 +371,9 @@ version numbers.
.B LD_ORIGIN_PATH
(glibc since 2.1)
Path where the binary is found (for non-set-user-ID programs).
-For security reasons, since glibc 2.4,
+Since glibc 2.4,
.B LD_ORIGIN_PATH
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.\" Only used if $ORIGIN can't be determined by normal means .\" (from the
origin path saved at load time, or from /proc/self/exe)?
.TP
@@ -382,16 +405,16 @@ If this variable is not defined, or is defined as an empty string, then the default is .IR /var/tmp .
.B LD_PROFILE_OUTPUT
-is ignored for set-user-ID and set-group-ID programs,
+is ignored in secure-execution mode.
which always use
.IR /var/profile .
.TP
.B LD_SHOW_AUXV
(glibc since 2.1)
Show auxiliary array passed up from the kernel.
-For security reasons, since glibc 2.3.5,
+Since glibc 2.3.5,
.B LD_SHOW_AUXV
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_TRACE_PRELINKING
(glibc since 2.4)
@@ -421,7 +444,7 @@ If
.B LD_USE_LOAD_BIAS
is defined with the value 0,
neither executables nor PIEs will honor the base addresses.
-This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored in secure-execution mode.
.TP
.B LD_VERBOSE
(glibc since 2.1)
@@ -507,6 +530,7 @@ mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm .BR sprof (1), .BR dlopen (3), .BR getauxval (3),
+.BR capabilities (7),
.BR rtld-audit (7),
.BR ldconfig (8),
.BR sln (8)
Regards,
Maria
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 10 lines · Maria Guseva
Gentle ping.
Quoted 8 lines
Ping.
On 09/22/2015 11:58 AM, Maria Guseva wrote:
Hello Michael, Yury
Quoted 1 line
What do you think of the alternative patch below?
Thank you, the patch you proposed looks much better.
Sorry for the long delay in reply. I've merged my version of this patch now. Thanks for reviewing it.
Cheers,
Michael
Quoted 187 lines
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
While at it, could you also mention that
/etc/suid-debugenablesLD_DEBUGfor suids?Does it? I can't see that in the glibc source. Am I missing something?
I was looking at
process_envvars(inrtld.c): it resetsdl_debug_maskfor
AT_SECUREbinaries unless/etc/suid-debugexists.Quoted 1 line
So I think it should mentioned in
LD_DEBUGenvironment variabledescription, here:
Quoted 8 lines
.B
LD_DEBUG(quoted diff) +5
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file +.IR /etc/suid\-debug +exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode..TP
So find the final patch below:
man8/ld.so.8 +0
-0@@ -61,8 +61,8 @@ of the binary if present and DT_RUNPATH attribute does notexist.
Use ofDT_RPATHis deprecated.
.IP o
Using the environment variable
-.BRLD_LIBRARY_PATH.man8/ld.so.8 +2
-1-Except if the executable is a set-user-ID/set-group-ID binary, +.BR LD_LIBRARY_PATH +(unless the executable is being run in secure-execution mode; see below). in which case it is ignored. .IP o (ELF only) Using the directories specified in the @@ -166,15 +166,38 @@environment variable setting (see below).
.BI \-\-inhibit\-rpath " list"
Ignore RPATH and RUNPATH information in object names in .IR list .man8/ld.so.8 +1
-3-This option is ignored if -.B ld.so -is set-user-ID or set-group-ID. +This option is ignored if when running in secure-execution mode (seebelow).
.TP
.BI \-\-audit " list"
Use objects named in
.I list
as auditors.
.SH ENVIRONMENTman8/ld.so.8 +22
-0+Various environment variable influence the operation of the dynamic linker. +.\" +.SS Secure-execution mode +For security reasons, +the effects of some environment variables are voided or modified if the +dynamic linker determines that the binary should be run in +secure-execution mode. +This determination is made by checking whether the .B AT_SECURE entry +in the auxiliary vector (see .BR getauxval (3)) has a nonzero value. +This entry may have a nonzero value for various reasons, including: +.IP * 3 +The process's real and effective user IDs differ, or the real and +effective group IDs differ. +This typically occurs as a result of executing a set-user-ID or +set-group-ID program. +.IP * +A process with a non-root user ID executed a binary that conferred +permitted or effective capabilities. +.IP * +A nonzero value may have been set by a Linux Security Module. +.\" +.SS Environment variables Among the more important environment variables are the following: .TP .B LD_ASSUME_KERNEL@@ -235,7 +258,7 @@ The items in the list are separated by either colons orsemicolons.
Similar to the
.B PATH
environment variable.man8/ld.so.8 +1
-1-Ignored in set-user-ID and set-group-ID programs. +This variable is ignore in secure-execution mode. .TP .B LD_PRELOAD A list of additional, user-specified, ELF shared @@ -243,7 +266,7 @@objects to be loaded before all others.
The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION.man8/ld.so.8 +1
-1-For set-user-ID/set-group-ID ELF binaries, +In secure-execution mode, preload pathnames containing slashes are ignored, and shared objects inthe standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
man8/ld.so.8 +0
-0@@ -282,7 +305,7 @@ to be loaded before all others in a separate linkernamespace would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .BLD_AUDITman8/ld.so.8 +1
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. The dynamic linker will notify the audit shared objects at so-calledauditing checkpoints\(emfor example, @@ -313,7 +336,7 @@ prints a help message about which categories can be specified in this environment variable.
Since glibc 2.3.4,
.BLD_DEBUGman8/ld.so.8 +5
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file +.IR /etc/suid\-debug +exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode. .TP.B
LD_DEBUG_OUTPUT
(glibc since 2.1)man8/ld.so.8 +5
-5@@ -322,14 +345,14 @@ File in which output should be written. The default is standard error. .B LD_DEBUG_OUTPUT -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_DYNAMIC_WEAK (glibc since 2.1.91) Allow weak symbols to be overridden (reverting to old glibc behavior). -For security reasons, since glibc 2.3.4, +Since glibc 2.3.4, .B LD_DYNAMIC_WEAK -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_HWCAP_MASK (glibc since 2.1)@@ -348,9 +371,9 @@ version numbers. .B LD_ORIGIN_PATH (glibc since 2.1) Path where the binary is found (for non-set-user-ID programs). -For security reasons, since glibc 2.4, +Since glibc 2.4, .B LD_ORIGIN_PATH -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .\" Only used if $ORIGIN can't be determined by normal means .\" (from theorigin path saved at load time, or from
/proc/self/exe)?
.TPman8/ld.so.8 +0
-0@@ -382,16 +405,16 @@ If this variable is not defined, or is defined as anempty string, then the default is .IR
/var/tmp.
.BLD_PROFILE_OUTPUTman8/ld.so.8 +5
-4-is ignored for set-user-ID and set-group-ID programs, +is ignored in secure-execution mode. which always use .IR /var/profile . .TP .B LD_SHOW_AUXV (glibc since 2.1) Show auxiliary array passed up from the kernel. -For security reasons, since glibc 2.3.5, +Since glibc 2.3.5, .B LD_SHOW_AUXV -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_TRACE_PRELINKING (glibc since 2.4)@@ -421,7 +444,7 @@ If .B LD_USE_LOAD_BIAS is defined with the value 0, neither executables nor PIEs will honor the base addresses. -This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored in secure-execution mode. .TP .B LD_VERBOSE (glibc since 2.1)@@ -507,6 +530,7 @@ mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm .BR sprof (1), .BR dlopen (3), .BR getauxval (3), +.BR capabilities (7), .BR rtld-audit (7), .BR ldconfig (8), .BR sln (8)Regards,
Maria
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 00f601d1282e$e3e04ef0$aba0ecd0$@[email protected]
A message that is not in the archive (sent off-list or not yet received): 00f601d1282e$e3e04ef0$aba0ecd0$@[email protected]
Hi
Please find below a few typos I found while looking at the text.
Quoted 24 lines · Maria Guseva
So find the final patch below:
man8/ld.so.8 +0
-0@@ -61,8 +61,8 @@ of the binary if present and DT_RUNPATH attribute does notexist.
Use ofDT_RPATHis deprecated.
.IP o
Using the environment variable
-.BRLD_LIBRARY_PATH.man8/ld.so.8 +2
-1-Except if the executable is a set-user-ID/set-group-ID binary, +.BR LD_LIBRARY_PATH +(unless the executable is being run in secure-execution mode; see below). in which case it is ignored. .IP o (ELF only) Using the directories specified in the @@ -166,15 +166,38 @@environment variable setting (see below).
.BI \-\-inhibit\-rpath " list"
Ignore RPATH and RUNPATH information in object names in .IR list .man8/ld.so.8 +1
-3-This option is ignored if -.B ld.so -is set-user-ID or set-group-ID. +This option is ignored if when running in secure-execution mode (see
Quoted 1 line
below).
either "if" or "when", not both
Quoted 7 lines
.TP
.BI \-\-audit " list"
Use objects named in
.I list
as auditors.
.SH ENVIRONMENT
+Various environment variable influence the operation of the dynamic linker.
s/variable/variables/
man8/ld.so.8
Quoted 11 lines
+.\"
+.SS Secure-execution modeman8/ld.so.8 +9
-0+For security reasons, +the effects of some environment variables are voided or modified if the +dynamic linker determines that the binary should be run in +secure-execution mode. +This determination is made by checking whether the .B AT_SECURE entry +in the auxiliary vector (see .BR getauxval (3)) has a nonzero value. +This entry may have a nonzero value for various reasons, including: +.IP * 3 +The process's real and effective user IDs differ, or the real and
I think one writes process' instead of process's if a possessive 's follows an s at the end of the word.
Quoted 18 lines
man8/ld.so.8 +10
-0+effective group IDs differ. +This typically occurs as a result of executing a set-user-ID or +set-group-ID program. +.IP * +A process with a non-root user ID executed a binary that conferred +permitted or effective capabilities. +.IP * +A nonzero value may have been set by a Linux Security Module. +.\" +.SS Environment variables Among the more important environment variables are the following: .TP .B LD_ASSUME_KERNEL@@ -235,7 +258,7 @@ The items in the list are separated by either colons orsemicolons.
Similar to the
.B PATH
environment variable.
man8/ld.so.8 The items in the list are separated by either colons or semicolons. · line 261
Quoted 2 lines
man8/ld.so.8 +1
-1-Ignored in set-user-ID and set-group-ID programs. +This variable is ignore in secure-execution mode.
s/ignore/ignored/
Thanks!
Cheers,
Silvan
Quoted 103 lines
.TP
.BLD_PRELOAD
A list of additional, user-specified, ELF shared @@ -243,7 +266,7 @@
objects to be loaded before all others.
The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared objects. The objects are searched for using the rules given under DESCRIPTION.man8/ld.so.8 +1
-1-For set-user-ID/set-group-ID ELF binaries, +In secure-execution mode, preload pathnames containing slashes are ignored, and shared objects inthe standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
man8/ld.so.8 +0
-0@@ -282,7 +305,7 @@ to be loaded before all others in a separate linkernamespace would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .BLD_AUDITman8/ld.so.8 +1
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. The dynamic linker will notify the audit shared objects at so-calledauditing checkpoints\(emfor example, @@ -313,7 +336,7 @@ prints a help message about which categories can be specified in this environment variable.
Since glibc 2.3.4,
.BLD_DEBUGman8/ld.so.8 +5
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file +.IR /etc/suid\-debug +exists (the content of the file is irrelevant), then .BR LD_DEBUG has +an effect in secure-execution mode. .TP.B
LD_DEBUG_OUTPUT
(glibc since 2.1)man8/ld.so.8 +5
-5@@ -322,14 +345,14 @@ File in which output should be written. The default is standard error. .B LD_DEBUG_OUTPUT -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_DYNAMIC_WEAK (glibc since 2.1.91) Allow weak symbols to be overridden (reverting to old glibc behavior). -For security reasons, since glibc 2.3.4, +Since glibc 2.3.4, .B LD_DYNAMIC_WEAK -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_HWCAP_MASK (glibc since 2.1)@@ -348,9 +371,9 @@ version numbers. .B LD_ORIGIN_PATH (glibc since 2.1) Path where the binary is found (for non-set-user-ID programs). -For security reasons, since glibc 2.4, +Since glibc 2.4, .B LD_ORIGIN_PATH -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .\" Only used if $ORIGIN can't be determined by normal means .\" (from theorigin path saved at load time, or from
/proc/self/exe)?
.TPman8/ld.so.8 +0
-0@@ -382,16 +405,16 @@ If this variable is not defined, or is defined as anempty string, then the default is .IR
/var/tmp.
.BLD_PROFILE_OUTPUTman8/ld.so.8 +5
-4-is ignored for set-user-ID and set-group-ID programs, +is ignored in secure-execution mode. which always use .IR /var/profile . .TP .B LD_SHOW_AUXV (glibc since 2.1) Show auxiliary array passed up from the kernel. -For security reasons, since glibc 2.3.5, +Since glibc 2.3.5, .B LD_SHOW_AUXV -is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. .TP .B LD_TRACE_PRELINKING (glibc since 2.4)@@ -421,7 +444,7 @@ If .B LD_USE_LOAD_BIAS is defined with the value 0, neither executables nor PIEs will honor the base addresses. -This variable is ignored by set-user-ID and set-group-ID programs. +This variable is ignored in secure-execution mode. .TP .B LD_VERBOSE (glibc since 2.1)@@ -507,6 +530,7 @@ mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm .BR sprof (1), .BR dlopen (3), .BR getauxval (3), +.BR capabilities (7), .BR rtld-audit (7), .BR ldconfig (8), .BR sln (8)Regards,
Maria
Quoted 4 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): CAKvUva-pDmq7Cuvh0=Ne+Z+tbTdxO=s5YX6KVa1dUeB=uw5YPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Hi Silvan!
Thank you very much for your comments. I've fixed the typos you've mentioned and also fixed some others I've found myself.
Please find updated patch below:
man8/ld.so.8 +29 -7
@@ -61,9 +61,8 @@ of the binary if present and DT_RUNPATH attribute does not exist. Use of DT_RPATH is deprecated. .IP o Using the environment variable -.BR LD_LIBRARY_PATH . -Except if the executable is a set-user-ID/set-group-ID binary, -in which case it is ignored. +.BR LD_LIBRARY_PATH +(unless the executable is being run in secure-execution mode; see below). .IP o (ELF only) Using the directories specified in the DT_RUNPATH dynamic section attribute
@@ -166,15 +165,38 @@ environment variable setting (see below). .BI \-\-inhibit\-rpath " list" Ignore RPATH and RUNPATH information in object names in .IR list . -This option is ignored if -.B ld.so -is set-user-ID or set-group-ID. +This option is ignored if running in secure-execution mode (see below). .TP .BI \-\-audit " list" Use objects named in .I list as auditors. .SH ENVIRONMENT +Various environment variables influence the operation of the dynamic linker. +.\" +.SS Secure-execution mode +For security reasons, +the effects of some environment variables are voided or modified if +the dynamic linker determines that the binary should be +run in secure-execution mode. +This determination is made by checking whether the +.B AT_SECURE +entry in the auxiliary vector (see +.BR getauxval (3)) +has a nonzero value. +This entry may have a nonzero value for various reasons, including: +.IP * 3 +The process' real and effective user IDs differ, +or the real and effective group IDs differ. +This typically occurs as a result of executing +a set-user-ID or set-group-ID program. +.IP * +A process with a non-root user ID executed a binary that +conferred permitted or effective capabilities. +.IP * +A nonzero value may have been set by a Linux Security Module. +.\" +.SS Environment variables Among the more important environment variables are the following: .TP .B LD_ASSUME_KERNEL
@@ -235,7 +257,7 @@ The items in the list are separated by either colons or semicolons. Similar to the .B PATH environment variable. -Ignored in set-user-ID and set-group-ID programs. +This variable is ignored in secure-execution mode. .TP .B LD_PRELOAD A list of additional, user-specified, ELF shared
@@ -243,7 +265,7 @@ objects to be loaded before all others. The items of the list can be separated by spaces or colons. This can be used to selectively override functions in other shared
objects.
The objects are searched for using the rules given under DESCRIPTION.
-For set-user-ID/set-group-ID ELF binaries,
+In secure-execution mode,
preload pathnames containing slashes are ignored,
and shared objects in the standard search directories are loaded only if the set-user-ID mode bit is enabled on the shared object file.
@@ -282,7 +304,7 @@ to be loaded before all others in a separate linker namespace
would occur in the process).
These objects can be used to audit the operation of the dynamic linker. .B LD_AUDIT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
The dynamic linker will notify the audit
shared objects at so-called auditing checkpoints\(emfor example,
@@ -313,7 +335,12 @@ prints a help message about which categories can be specified in this
environment variable.
Since glibc 2.3.4,
.B LD_DEBUG
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
+However, if the file
+.IR /etc/suid\-debug
+exists (the content of the file is irrelevant), then
+.BR LD_DEBUG
+has an effect in secure-execution mode.
.TP
.B LD_DEBUG_OUTPUT
(glibc since 2.1)
@@ -322,14 +349,14 @@ File in which
output should be written.
The default is standard error.
.B LD_DEBUG_OUTPUT
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_DYNAMIC_WEAK
(glibc since 2.1.91)
Allow weak symbols to be overridden (reverting to old glibc behavior).
-For security reasons, since glibc 2.3.4,
+Since glibc 2.3.4,
.B LD_DYNAMIC_WEAK
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_HWCAP_MASK
(glibc since 2.1)
@@ -348,9 +375,9 @@ version numbers.
.B LD_ORIGIN_PATH
(glibc since 2.1)
Path where the binary is found (for non-set-user-ID programs).
-For security reasons, since glibc 2.4,
+Since glibc 2.4,
.B LD_ORIGIN_PATH
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.\" Only used if $ORIGIN can't be determined by normal means
.\" (from the origin path saved at load time, or from /proc/self/exe)?
.TP
@@ -382,16 +409,16 @@ If this variable is not defined, or is defined as an empty string,
then the default is
.IR /var/tmp .
.B LD_PROFILE_OUTPUT
-is ignored for set-user-ID and set-group-ID programs,
-which always use
-.IR /var/profile .
+is ignored in secure-execution mode when
+.IR /var/profile
+is always used.
.TP
.B LD_SHOW_AUXV
(glibc since 2.1)
Show auxiliary array passed up from the kernel.
-For security reasons, since glibc 2.3.5,
+Since glibc 2.3.5,
.B LD_SHOW_AUXV
-is ignored for set-user-ID/set-group-ID binaries.
+is ignored in secure-execution mode.
.TP
.B LD_TRACE_PRELINKING
(glibc since 2.4)
@@ -421,7 +448,7 @@ If
.B LD_USE_LOAD_BIAS
is defined with the value 0,
neither executables nor PIEs will honor the base addresses.
-This variable is ignored by set-user-ID and set-group-ID programs.
+This variable is ignored in secure-execution mode.
.TP
.B LD_VERBOSE
(glibc since 2.1)
@@ -507,6 +534,7 @@ mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm
.BR sprof (1),
.BR dlopen (3),
.BR getauxval (3),
+.BR capabilities (7),
.BR rtld-audit (7),
.BR ldconfig (8),
.BR sln (8)
Signature · 7 lines
Regards, Maria -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello Maria,
Review
Quoted 12 lines
(quoted diff) +0
-0@@ -313,7 +335,12 @@ prints a help message about which categories can bespecified in this
environment variable.
Since glibc 2.3.4,
.BLD_DEBUG(quoted diff) +6
-1-is ignored for set-user-ID/set-group-ID binaries. +is ignored in secure-execution mode. +However, if the file +.IR /etc/suid\-debug +exists (the content of the file is irrelevant), then +.BR LD_DEBUG +has an effect in secure-execution mode.
Thanks also for this piece. I added it, but trimmed a little.
Cheers,
Michael
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Silvan
Quoted 24 lines · Silvan Jegen
Hi
Please find below a few typos I found while looking at the text.
Quoted 19 lines · Maria Guseva
So find the final patch below:
man8/ld.so.8 +0
-0@@ -61,8 +61,8 @@ of the binary if present and DT_RUNPATH attribute does notexist.
Use ofDT_RPATHis deprecated.
.IP o
Using the environment variable
-.BRLD_LIBRARY_PATH.man8/ld.so.8 +2
-1-Except if the executable is a set-user-ID/set-group-ID binary, +.BR LD_LIBRARY_PATH +(unless the executable is being run in secure-execution mode; see below). in which case it is ignored. .IP o (ELF only) Using the directories specified in the @@ -166,15 +166,38 @@environment variable setting (see below).
.BI \-\-inhibit\-rpath " list"
Quoted 8 lines
Quoted 6 lines
Ignore RPATH and RUNPATH information in object names in .IR list .
man8/ld.so.8 +1
-3-This option is ignored if -.B ld.so -is set-user-ID or set-group-ID. +This option is ignored if when running in secure-execution mode (seebelow).
either "if" or "when", not both
Yes.
Quoted 9 lines
Quoted 7 lines
.TP
.BI \-\-audit " list"
Use objects named in
.I list
as auditors.
.SH ENVIRONMENT
+Various environment variable influence the operation of the dynamic linker.s/variable/variables/
Yes.
Quoted 6 lines
Quoted 6 lines
+.\"
+.SS Secure-execution modeman8/ld.so.8 +4
-0+For security reasons, +the effects of some environment variables are voided or modified if the +dynamic linker determines that the binary should be run in +secure-execution mode.
Quoted 8 lines
man8/ld.so.8
Quoted 5 lines
man8/ld.so.8 +5
-0+This determination is made by checking whether the .B AT_SECURE entry +in the auxiliary vector (see .BR getauxval (3)) has a nonzero value. +This entry may have a nonzero value for various reasons, including: +.IP * 3 +The process's real and effective user IDs differ, or the real andI think one writes process' instead of process's if a possessive 's follows an s at the end of the word.
"process's" works okay for me.
Cheers,
Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html