High load since upgrade
Hi
Hope this is the right list I'm posting to but here goes.
I recently upgraded 3 servers to the stock 2.6.14.3 kernels from an older 2.4.28 kernel, all identical running debian stable and all up to date with no outstandng updates needed to the OS.
As from these 3 graphs (all servers almost identical hardware), PIII 900, 1G RAM, you can quite clearly see when the upgrades where made and sending the load avg up way above the previous averages.
http://pics.skyblue.eu.org/graphs/
All these servers are only running; shorewall, squid and ntop as their primary functions.
Before I go pasting my .config etc etc I wanted to know first off what anyone would really like so I don't paste too much to create a really large post. Also if it's a known issue?
But here is a quick vmstat and as can see the 'in' is rather larger than normal I would think?
Top is not reporting anything usefull really.
/usr/src/linux-2.6.14.3# vmstat -n 1
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id
wa
0 0 0 26 231 364 0 0 0 13 13 4 1 2 97
0
0 0 0 26 231 364 0 0 0 0 272 42 0 0 100
0
0 0 0 26 231 364 0 0 0 0 265 35 0 0 100
0
0 0 0 26 231 364 0 0 0 0 276 46 0 0 100
0
0 0 0 26 231 364 0 0 0 36 290 70 0 0 100
0
0 0 0 26 231 364 0 0 0 48 276 64 0 0 100
0
0 0 0 26 231 364 0 0 0 0 291 69 0 0 100
0
0 0 0 26 231 364 0 0 0 12 266 37 0 0 100
0
0 0 0 26 231 364 0 0 0 0 315 120 0 0 100
0
0 0 0 26 231 364 0 0 0 4 322 116 0 0 100
0
0 0 0 26 231 364 0 0 0 0 313 99 0 0 100
0
0 0 0 26 231 364 0 0 0 0 301 92 0 0 100
0
0 0 0 26 231 364 0 0 0 0 279 49 0 0 100
0
0 0 0 26 231 364 0 0 0 0 298 77 0 0 100
0
0 0 0 26 231 364 0 0 0 0 315 93 0 0 100
0
0 0 0 26 231 364 0 0 0 36 300 74 0 0 100
0
0 0 0 26 231 364 0 0 0 0 283 45 0 0 100
0
A list of the hardware is from lspci is:
0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23) 0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
27)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50) 0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev
04)
0000:01:04.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev
05)
0000:02:00.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev
05)
0000:02:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
0000:03:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) 0000:04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 0000:04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 0000:04:06.0 Ethernet controller: Intel Corp. 82546GB Gigabit Ethernet Controller (rev 03)
0000:04:06.1 Ethernet controller: Intel Corp. 82546GB Gigabit Ethernet Controller (rev 03)
Quoted 10 lines · Brent
Hi
Hope this is the right list I'm posting to but here goes.I recently upgraded 3 servers to the stock 2.6.14.3 kernels from an older 2.4.28 kernel, all identical running debian stable and all up to date with no outstandng updates needed to the OS.
As from these 3 graphs (all servers almost identical hardware), PIII 900, 1G RAM, you can quite clearly see when the upgrades where made and sending the load avg up way above the previous averages.
http://pics.skyblue.eu.org/graphs/
you graphs show a permanent load of 1 + something low. In the past, there have been some bugs in modules which made them increase the apparent load average by 1. I suspect that you're witnessing something similar here.
Quoted 6 lines
All these servers are only running; shorewall, squid and ntop as their primary functions.
Before I go pasting my .config etc etc I wanted to know first off what anyone would really like so I don't paste too much to create a really large post.
# ps aux # lsmod # dmesg
Quoted 1 line
Also if it's a known issue?
I don't think so. I've encountered scheduler fairness problems on 2.6 which always made me go back to 2.4, except for my home web server on parisc which has never been stable for more than a few days on 2.4, while it's rock solid on 2.6.11, but I never monitor performance there so it's not a problem. Anyway, its loadavg is ~0.
Quoted 2 lines
But here is a quick vmstat and as can see the 'in' is rather larger than normal I would think?
It's expected. In 2.6 on x86, you now have the system timer set to 250 Hz, while it was at 100 on 2.4. So it implies 150 more interrupts/s that you can count in the 'in' column. I guess you were roughly between 110 and 160 on 2.4 here.
Quoted 63 lines
Top is not reporting anything usefull really.
/usr/src/linux-2.6.14.3# vmstat -n 1
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id
wa
0 0 0 26 231 364 0 0 0 13 13 4 1 2 97
0
0 0 0 26 231 364 0 0 0 0 272 42 0 0 100
0
0 0 0 26 231 364 0 0 0 0 265 35 0 0 100
0
0 0 0 26 231 364 0 0 0 0 276 46 0 0 100
0
0 0 0 26 231 364 0 0 0 36 290 70 0 0 100
0
0 0 0 26 231 364 0 0 0 48 276 64 0 0 100
0
0 0 0 26 231 364 0 0 0 0 291 69 0 0 100
0
0 0 0 26 231 364 0 0 0 12 266 37 0 0 100
0
0 0 0 26 231 364 0 0 0 0 315 120 0 0 100
0
0 0 0 26 231 364 0 0 0 4 322 116 0 0 100
0
0 0 0 26 231 364 0 0 0 0 313 99 0 0 100
0
0 0 0 26 231 364 0 0 0 0 301 92 0 0 100
0
0 0 0 26 231 364 0 0 0 0 279 49 0 0 100
0
0 0 0 26 231 364 0 0 0 0 298 77 0 0 100
0
0 0 0 26 231 364 0 0 0 0 315 93 0 0 100
0
0 0 0 26 231 364 0 0 0 36 300 74 0 0 100
0
0 0 0 26 231 364 0 0 0 0 283 45 0 0 100
0A list of the hardware is from lspci is:
0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23) 0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
27)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50) 0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev
04)
0000:01:04.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev
05)
0000:02:00.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev
05)
0000:02:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel
Quoted 8 lines
Ultra3 SCSI Processor (rev 06)
0000:03:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) 0000:04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 0000:04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 0000:04:06.0 Ethernet controller: Intel Corp. 82546GB Gigabit Ethernet Controller (rev 03)
0000:04:06.1 Ethernet controller: Intel Corp. 82546GB Gigabit Ethernet Controller (rev 03)
Regards,
Willy
Almost everything is statically compiled apart from a few things that I didn't feel like rebooting for.
I also put up the .config at http://pics.skyblue.eu.org/graphs/config.txt if you want to check that out as well.
lon-gw:/var/log# lsmod Module Size Used by 8250 27380 0 serial_core 25984 1 8250 lon-gw:/var/log#
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 1584 516 ? S Dec09 0:01 init [2] root 2 0.0 0.0 0 0 ? S Dec09 0:06 [migration/0] root 3 0.0 0.0 0 0 ? SN Dec09 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S Dec09 0:06 [migration/1] root 5 0.0 0.0 0 0 ? SN Dec09 0:00 [ksoftirqd/1] root 6 0.0 0.0 0 0 ? S< Dec09 0:00 [events/0] root 7 0.0 0.0 0 0 ? S< Dec09 0:00 [events/1] root 8 0.0 0.0 0 0 ? S< Dec09 0:00 [khelper] root 9 0.0 0.0 0 0 ? S< Dec09 0:00 [kthread] root 12 0.0 0.0 0 0 ? S< Dec09 0:00 [kacpid] root 78 0.0 0.0 0 0 ? S< Dec09 0:00 [kblockd/0] root 79 0.0 0.0 0 0 ? S< Dec09 0:00 [kblockd/1] root 82 0.0 0.0 0 0 ? S< Dec09 0:00 [khubd] root 183 0.0 0.0 0 0 ? S Dec09 0:00 [pdflush] root 184 0.0 0.0 0 0 ? S Dec09 0:00 [pdflush] root 186 0.0 0.0 0 0 ? S< Dec09 0:00 [aio/0] root 185 0.0 0.0 0 0 ? S Dec09 0:00 [kswapd0] root 187 0.0 0.0 0 0 ? S< Dec09 0:00 [aio/1] root 771 0.0 0.0 0 0 ? S< Dec09 0:00 [kseriod] root 848 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_0] root 881 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_1] root 915 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_2] root 961 0.0 0.0 0 0 ? D Dec09 0:00 [firmware/dell_r] root 964 0.0 0.0 0 0 ? S Dec09 0:00 [kirqd] root 966 0.0 0.0 0 0 ? S Dec09 0:00 [kjournald] root 1259 0.0 0.0 0 0 ? S Dec09 0:00 [kjournald] root 1260 0.0 0.0 0 0 ? S Dec09 0:00 [kjournald] root 1261 0.0 0.0 0 0 ? S Dec09 0:00 [kjournald] root 1262 0.0 0.0 0 0 ? S Dec09 0:02 [kjournald] root 1263 0.0 0.0 0 0 ? S Dec09 0:00 [kjournald] nobody 1963 0.0 0.1 3660 1176 ? Ss Dec09 1:05 /usr/sbin/openvpn --writepid /var/run/openvpn.lonoffice-lonrack.pid --daemon ovpn-lonoffice-lonrack --status /var/run/openvpn.lonoffice-lonrack.status 10 --cd /etc/openvpn --config /etc/openvpn/lonoffice-lonrack.conf root 6120 0.0 0.0 2332 772 ? Ss Dec09 0:05 /sbin/syslogd root 6123 0.0 0.1 2616 1460 ? Ss Dec09 0:00 /sbin/klogd root 6131 0.0 0.5 41060 5436 ? Ss Dec09 0:09
/usr/sbin/named -c /etc/bind/internal/named.conf
root 6133 0.0 0.2 38736 3088 ? Ss Dec09 0:00/usr/sbin/named -c /etc/bind/external/named.conf
root 6135 0.0 0.3 39328 3400 ? Ss Dec09 0:01/usr/sbin/named -c /etc/bind/wifivpn/named.conf
root 6183 0.0 2.0 24128 21052 ? Ss Dec09 0:00/usr/sbin/spamd -m 10 -d --pidfile=/var/run/spamd.pid
root 6191 0.0 2.1 25172 21732 ? S Dec09 0:01 spamd child root 6192 0.0 2.0 24832 21340 ? S Dec09 0:00 spamd child root 6193 0.0 2.0 24948 21468 ? S Dec09 0:01 spamd child root 6194 0.0 2.0 25056 21556 ? S Dec09 0:01 spamd child root 6195 0.0 2.0 24836 21328 ? S Dec09 0:00 spamd child root 6196 0.0 2.1 26040 22580 ? S Dec09 0:02 spamd child root 6197 0.0 2.1 25168 21724 ? S Dec09 0:01 spamd child root 6198 0.0 2.1 26044 22588 ? S Dec09 0:02 spamd child root 6199 0.0 2.0 25012 21484 ? S Dec09 0:00 spamd child root 6200 0.0 2.1 25616 22124 ? S Dec09 0:01 spamd child clamav 6201 0.0 1.7 29184 17812 ? Ss Dec09 0:06
/usr/sbin/clamd
clamav 6242 0.0 0.1 4180 1192 ? Ss Dec09 0:00/usr/bin/freshclam -d --quiet -p /var/run/clamav/freshclam.pid
root 6287 0.0 0.0 2460 640 ? Ss Dec09 0:00/usr/sbin/dhcpd -q
Debian- 6430 0.0 0.1 8488 1340 ? Ss Dec09 0:00/usr/sbin/exim4 -bd -q30m
root 6442 0.0 0.0 2316 660 ? Ss Dec09 0:00/usr/sbin/inetd
ntop 6447 0.2 3.5 108128 36556 ? Ss Dec09 7:38/usr/sbin/ntop -d -L -u ntop -P /var/lib/ntop --skip-version-check -a /var/log/ntop/access.log -i eth0,eth1 -n -O /var/log/ntop/
nobody 6454 0.0 0.1 3376 1472 ? S Dec09 0:00
perdition.pop3s
nobody 6457 0.0 0.1 3380 1484 ? S Dec09 0:00
perdition.imaps
root 6460 0.0 0.0 2436 720 ? Ss Dec09 0:00/usr/sbin/pptpd
root 6481 0.0 0.3 6468 3696 ? S Dec09 0:21/usr/sbin/snmpd -Lsd -Lf /dev/null -p /var/run/snmpd.pid
root 6487 0.0 0.0 3544 1032 ? Ss Dec09 0:08/usr/sbin/sshd
root 6496 0.0 0.3 4024 4024 ? SLs Dec09 0:00/usr/sbin/ntpd -p /var/run/ntpd.pid
root 6521 0.0 0.0 4240 608 ? Ss Dec09 0:00/usr/sbin/squid -D -sYC
proxy 6523 0.0 1.6 18952 16644 ? S Dec09 0:29 (squid) -D
-sYC
proxy 6525 0.0 0.0 1428 296 ? Ss Dec09 0:00 (unlinkd) daemon 6537 0.0 0.0 1768 364 ? Ss Dec09 0:00 /usr/sbin/atd root 6540 0.0 0.0 1820 740 ? Ss Dec09 0:00
/usr/sbin/cron
root 6547 0.0 0.4 9188 4992 ? Ss Dec09 0:00 /usr/bin/perl/usr/share/webmin/miniserv.pl /etc/webmin/miniserv.conf
root 6568 0.0 0.0 1584 492 tty1 Ss+ Dec09 0:00 /sbin/getty
38400 tty1
root 6569 0.0 0.0 1580 488 tty2 Ss+ Dec09 0:00 /sbin/getty
38400 tty2
root 6570 0.0 0.0 1584 492 tty3 Ss+ Dec09 0:00 /sbin/getty
38400 tty3
root 6571 0.0 0.0 1584 488 tty4 Ss+ Dec09 0:00 /sbin/getty
38400 tty4
root 6572 0.0 0.0 1584 492 tty5 Ss+ Dec09 0:00 /sbin/getty
38400 tty5
root 6573 0.0 0.0 1584 492 tty6 Ss+ Dec09 0:00 /sbin/getty
38400 tty6
root 17864 0.0 0.1 6988 1932 ? Ss 12:32 0:00 sshd: bgeach
[priv]
bgeach 17866 0.0 0.1 7140 1448 ? S 12:32 0:00 sshd:
bgeach@pts/0
bgeach 17867 0.0 0.1 3064 1612 pts/0 Ss 12:32 0:00 -bash root 17870 0.0 0.1 2672 1496 pts/0 S 12:32 0:00 -su root 19194 0.0 0.0 2628 848 pts/0 S 12:33 0:00 sms_serv root 31127 0.0 0.0 2568 856 pts/0 R+ 12:42 0:00 ps aux
Linux version 2.6.14.3 (root@lon-gw) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #4 SMP Fri Dec 9 14:02:29 GMT 2005 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fffec00 (ACPI data)
BIOS-e820: 000000003fffec00 - 000000003ffff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee20000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM
available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32752 pages, LIFO batch:15 DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdcd0
ACPI: RSDT (v001 DELL PA1550 0x00000001 MSFT 0x0100000a) @ 0x000fdce4
ACPI: FADT (v001 DELL PA1550 0x00000001 MSFT 0x0100000a) @ 0x000fdd10
ACPI: MADT (v001 DELL PA1550 0x00000001 MSFT 0x0100000a) @ 0x000fdd84
ACPI: DSDT (v001 DELL PA1550 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3ffff000:bec01000) Built 1 zonelists Kernel command line:
root=/dev/sda1 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec01000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 927.350 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033212k/1048512k available (2847k kernel code, 14528k reserved, 1073k data, 244k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1857.01 BogoMIPS (lpj=3714020) Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 06 Booting processor 1/0 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1854.35 BogoMIPS (lpj=3708700)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3711.36 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfcb7e, last bus=4
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:03.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK9] (IRQs *3 4 5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 *7 10 11 12 14) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: feb00000-febfffff
PREFETCH window: f8000000-fbffffff
PCI: Bridge: 0000:01:04.0
IO window: d000-dfff
MEM window: fe900000-febfffff
PREFETCH window: f8000000-fbffffff
IA-32 Microcode Update Driver: v1.14 <[email protected]> highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 [email protected]). Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 29 (level, low) -> IRQ 16
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:04:06.1[B] -> GSI 30 (level, low) -> IRQ 17
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Ethernet Channel Bonding Driver: v2.6.4 (September 26, 2005)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.htmleepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 18
eth2: OEM i82557/i82558 10/100 Ethernet, 00:B0:D0:F0:09:2F, IRQ 18.
Board assembly 02d484-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 17 (level, low) -> IRQ 19
eth3: OEM i82557/i82558 10/100 Ethernet, 00:B0:D0:F0:09:30, IRQ 19.
Board assembly 02d484-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
PPP generic driver version 2.4.2
PPP Deflate Compression module registered PPP BSD Compression module registered MPPE/MPPC encryption/compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio ProbingIDE interface ide0...
hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, (U)DMA Uniform CD-ROM driver
Revision: 3.20 Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers...
ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 27 (level, low) -> IRQ 20 scsi0 :
Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 28 (level, low) -> IRQ 21 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 3:slot 0:func 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 25 (level, low) -> IRQ 22
megaraid: fw version:[197O] bios version:[3.35]
scsi2 : LSI Logic MegaRAID driver
scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: DELL Model: 1x3 U2W SCSI BP Rev: 1.21
Type: Processor ANSI SCSI revision: 02
scsi[2]: scanning scsi channel 1 [Phy 1] for non-raid devices scsi[2]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 34G Rev: 197O
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 71557120 512-byte hdwr sectors (36637 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through SCSI device sda: 71557120 512-byte hdwr sectors (36637 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > Attached scsi disk sda at
scsi2, channel 2, id 0, lun 0
usbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage USB Mass Storage support registered.
usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
mice: PS/2 mouse device common for all mice i2c /dev entries driver piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device i2c_adapter i2c-0: found DS1780 revision 1 adm9240 0-002c: Using VRM: 8.2 adm9240 0-002c: status:
config 0x03 mode 1 i2c_adapter i2c-0: found DS1780 revision 1 adm9240 0-002d: Using VRM: 8.2 adm9240 0-002d: status: config 0x03 mode 1 i2c_adapter i2c-0: found LM81 revision 3 adm9240 0-002e: Using VRM: 8.2 adm9240 0-002e: status: config 0x03 mode 1 i2c_adapter i2c-0: detect fail:
address match, 0x2f
dcdbas: Dell Systems Management Base Driver (version 5.6.0-1)
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered ip_conntrack version 2.3 (8191 buckets, 65528 max) - 236 bytes per conntrack ctnetlink v0.90: registering with nfnetlink. ip_conntrack_pptp version 3.1 loadedip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <[email protected]>. http://snowman.net/projects/ipt_recent/
ClusterIP Version 0.8 loaded successfullyarp_tables: (C) 2002 David S. Miller
TCP bic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
Netfilter messages via NETLINK v0.30.
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 244k freed Adding 2000052k swap on /dev/sda6. Priority:-1 extents:1 across:2000052k
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
Quoted 169 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Willy Tarreau
Sent: 09 December 2005 21:44
To: Brent
Cc: [email protected]
Subject: Re: High load since upgradeQuoted 6 lines · Brent
Hi
Hope this is the right list I'm posting to but here goes.I recently upgraded 3 servers to the stock 2.6.14.3 kernels from an older
2.4.28 kernel, all identical running debian stable and allup to date
Quoted 2 lines
with no outstandng updates needed to the OS. As from these 3 graphs (all servers almost identical
hardware), PIII
Quoted 3 lines
900, 1G RAM, you can quite clearly see when the upgrades where made and sending the load avg up way above the previous averages.
http://pics.skyblue.eu.org/graphs/you graphs show a permanent load of 1 + something low. In the past, there have been some bugs in modules which made them increase the apparent load average by 1. I suspect that you're witnessing something similar here.
Quoted 1 line
All these servers are only running; shorewall, squid and
ntop as their
Quoted 3 lines
primary functions.
Before I go pasting my .config etc etc I wanted to know
first off what
Quoted 1 line
anyone would really like so I don't paste too much to
create a really
Quoted 1 line
large post.
# ps aux # lsmod # dmesgQuoted 1 line
Also if it's a known issue?
I don't think so. I've encountered scheduler fairness problems on 2.6 which always made me go back to 2.4, except for my home web server on parisc which has never been stable for more than a few days on 2.4, while it's rock solid on 2.6.11, but I never monitor performance there so it's not a problem. Anyway, its loadavg is ~0.
Quoted 2 lines
But here is a quick vmstat and as can see the 'in' is rather larger than normal I would think?
It's expected. In 2.6 on x86, you now have the system timer set to 250 Hz, while it was at 100 on 2.4. So it implies 150 more interrupts/s that you can count in the 'in' column. I guess you were roughly between 110 and 160 on 2.4 here.
Quoted 6 lines
Top is not reporting anything usefull really.
/usr/src/linux-2.6.14.3# vmstat -n 1
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b swpd free buff cache si so bi boin cs us sy id
Quoted 2 lines
wa
0 0 0 26 231 364 0 0 0 1313 4 1 2 97
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0272 42 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0265 35 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0276 46 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 36290 70 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 48276 64 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0291 69 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 12266 37 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0315 120 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 4322 116 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0313 99 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0301 92 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0279 49 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0298 77 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0315 93 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 36300 74 0 0 100
Quoted 2 lines
0
0 0 0 26 231 364 0 0 0 0283 45 0 0 100
Quoted 9 lines
0
A list of the hardware is from lspci is:
0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23) 0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) 0000:00:01.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro
Quoted 1 line
100] (rev 08) 0000:00:02.0 Ethernet controller: Intel Corp.
82557/8/9
Quoted 6 lines
[Ethernet Pro 100] (rev 08) 0000:00:03.0 VGA compatible controller:
ATI Technologies Inc Rage XL (rev
27)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50) 0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USBController
Quoted 3 lines
(rev
04)
0000:01:04.0 PCI bridge: Digital Equipment CorporationDECchip 21154
Quoted 3 lines
(rev
05)
0000:02:00.0 PCI bridge: Digital Equipment CorporationDECchip 21154
Quoted 4 lines
(rev
05)
0000:02:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual ChannelQuoted 8 lines
Ultra3 SCSI Processor (rev 06)
0000:03:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) 0000:04:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
0000:04:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev
01) 0000:04:06.0 Ethernet controller: Intel Corp. 82546GB Gigabit Ethernet Controller (rev 03)
0000:04:06.1 Ethernet controller: Intel Corp. 82546GBGigabit Ethernet
Quoted 1 line
Controller (rev 03)
Regards,
Willy-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hi,
Quoted 28 lines · Brent
Almost everything is statically compiled apart from a few things that I didn't feel like rebooting for.
I also put up the .config at http://pics.skyblue.eu.org/graphs/config.txt if you want to check that out as well.lon-gw:/var/log# lsmod Module Size Used by 8250 27380 0 serial_core 25984 1 8250 lon-gw:/var/log#USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 1584 516 ? S Dec09 0:01 init [2] root 2 0.0 0.0 0 0 ? S Dec09 0:06 [migration/0] root 3 0.0 0.0 0 0 ? SN Dec09 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S Dec09 0:06 [migration/1] root 5 0.0 0.0 0 0 ? SN Dec09 0:00 [ksoftirqd/1] root 6 0.0 0.0 0 0 ? S< Dec09 0:00 [events/0] root 7 0.0 0.0 0 0 ? S< Dec09 0:00 [events/1] root 8 0.0 0.0 0 0 ? S< Dec09 0:00 [khelper] root 9 0.0 0.0 0 0 ? S< Dec09 0:00 [kthread] root 12 0.0 0.0 0 0 ? S< Dec09 0:00 [kacpid] root 78 0.0 0.0 0 0 ? S< Dec09 0:00 [kblockd/0] root 79 0.0 0.0 0 0 ? S< Dec09 0:00 [kblockd/1] root 82 0.0 0.0 0 0 ? S< Dec09 0:00 [khubd] root 183 0.0 0.0 0 0 ? S Dec09 0:00 [pdflush] root 184 0.0 0.0 0 0 ? S Dec09 0:00 [pdflush]
Quoted 8 lines
root 186 0.0 0.0 0 0 ? S< Dec09 0:00 [aio/0] root 185 0.0 0.0 0 0 ? S Dec09 0:00 [kswapd0] root 187 0.0 0.0 0 0 ? S< Dec09 0:00 [aio/1] root 771 0.0 0.0 0 0 ? S< Dec09 0:00 [kseriod] root 848 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_0] root 881 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_1] root 915 0.0 0.0 0 0 ? S< Dec09 0:00 [scsi_eh_2] root 961 0.0 0.0 0 0 ? D Dec09 0:00 [firmware/dell_r]
^^^^^ ^^^^^^^^^^^^^^^
What's this kernel thread ? The fact that it's stuck in D state makes me think it may be the responsible for the skewed values you measure. Can you retry without it ? I don't know where it comes from, maybe this is related to some of the following discoveries, I don't know :
Quoted 4 lines
scsi2 : LSI Logic MegaRAID driver
scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: DELL Model: 1x3 U2W SCSI BP Rev: 1.21
Type: Processor ANSI SCSI revision: 02
(...)
Quoted 5 lines
0-002d: Using VRM: 8.2 adm9240 0-002d: status: config
0x03mode 1i2c_adapteri2c-0: found LM81 revision 3 adm9240 0-002e: Using VRM: 8.2 adm9240 0-002e: status: config0x03mode 1i2c_adapteri2c-0: detect fail:
address match,0x2f
dcdbas: Dell Systems Management Base Driver (version 5.6.0-1)
(...)
Regards,
Willy
Thanks.
That was it.
For anyone that ever runs into this I removed CONFIG_DELL_RBU from the .config rebuilt the kernel and booted into it and now my load is hovering around a decent 0.08 ish
Thanks for the help Willy
Cheers
Brent
Quoted 106 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Willy Tarreau
Sent: 11 December 2005 13:09
To: Brent
Cc: [email protected]
Subject: Re: High load since upgradeHi,
Quoted 1 line · Brent
Almost everything is statically compiled apart from a few
things that
Quoted 3 lines
I didn't feel like rebooting for.
I also put up the .config at
http://pics.skyblue.eu.org/graphs/config.txt if you want tocheck that out as well.
Quoted 9 lines
lon-gw:/var/log# lsmod Module Size Used by 8250 27380 0 serial_core 25984 1 8250 lon-gw:/var/log#USER PID %CPU %MEM VSZ RSS TTY STAT START
TIME COMMAND
Quoted 1 line
root 1 0.0 0.0 1584 516 ? S Dec09
0:01 init [2]
Quoted 1 line
root 2 0.0 0.0 0 0 ? S Dec09
0:06 [migration/0]
Quoted 1 line
root 3 0.0 0.0 0 0 ? SN Dec09
0:00 [ksoftirqd/0]
Quoted 1 line
root 4 0.0 0.0 0 0 ? S Dec09
0:06 [migration/1]
Quoted 1 line
root 5 0.0 0.0 0 0 ? SN Dec09
0:00 [ksoftirqd/1]
Quoted 1 line
root 6 0.0 0.0 0 0 ? S< Dec09
0:00 [events/0]
Quoted 1 line
root 7 0.0 0.0 0 0 ? S< Dec09
0:00 [events/1]
Quoted 1 line
root 8 0.0 0.0 0 0 ? S< Dec09
0:00 [khelper]
Quoted 1 line
root 9 0.0 0.0 0 0 ? S< Dec09
0:00 [kthread]
Quoted 1 line
root 12 0.0 0.0 0 0 ? S< Dec09
0:00 [kacpid]
Quoted 1 line
root 78 0.0 0.0 0 0 ? S< Dec09
0:00 [kblockd/0]
Quoted 1 line
root 79 0.0 0.0 0 0 ? S< Dec09
0:00 [kblockd/1]
Quoted 1 line
root 82 0.0 0.0 0 0 ? S< Dec09
0:00 [khubd]
Quoted 1 line
root 183 0.0 0.0 0 0 ? S Dec09
0:00 [pdflush]
Quoted 1 line
root 184 0.0 0.0 0 0 ? S Dec09
0:00 [pdflush]
Quoted 1 line
root 186 0.0 0.0 0 0 ? S< Dec09
0:00 [aio/0]
Quoted 1 line
root 185 0.0 0.0 0 0 ? S Dec09
0:00 [kswapd0]
Quoted 1 line
root 187 0.0 0.0 0 0 ? S< Dec09
0:00 [aio/1]
Quoted 1 line
root 771 0.0 0.0 0 0 ? S< Dec09
0:00 [kseriod]
Quoted 1 line
root 848 0.0 0.0 0 0 ? S< Dec09
0:00 [
scsi_eh_0]Quoted 1 line
root 881 0.0 0.0 0 0 ? S< Dec09
0:00 [
scsi_eh_1]Quoted 1 line
root 915 0.0 0.0 0 0 ? S< Dec09
0:00 [
scsi_eh_2]Quoted 1 line
root 961 0.0 0.0 0 0 ? D Dec09
0:00 [
firmware/dell_r]^^^^^^^^^^^^^^^^^^^^
What's this kernel thread ? The fact that it's stuck in D state makes me think it may be the responsible for the skewed values you measure. Can you retry without it ? I don't know where it comes from, maybe this is related to some of the following discoveries, I don't know :
Quoted 4 lines
scsi2 : LSI Logic MegaRAID driver
scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: DELL Model: 1x3 U2W SCSI BP Rev: 1.21
Type: Processor ANSI SCSI revision: 02(...)
Quoted 3 lines
0-002d: Using VRM: 8.2 adm9240 0-002d: status: config
0x03mode 1i2c_adapteri2c-0: found LM81 revision 3 adm9240 0-002e: Using VRM:
8.2 adm9240 0-002e: status: config0x03mode 1i2c_adapteri2c-0: detect fail:
Quoted 2 lines
address match,
0x2f
dcdbas: Dell Systems Management Base Driver (version 5.6.0-1)(...)
Regards,
Willy-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/