Skip to contentSkip to conversation

get_timer versus get_ticks

U-Boot-Users Robert Deliën 1 participant 1 message Dec 8, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

I am currently straightening out lib-mips/time.c to make its granularity defined by CFG_HZ (=1000) instead of the processor?s frequency at which MIPS counters normally run.

Can somebody explain me what the difference between get_timer and get_ticks is? Get_timer returns the current value of the timer in 1/CFG_HZ units, as I would expect. I would expect get_ticks to return the raw counter value, but that value would useless because there?s no way to tell what speed it?s running at: get_tbclk is returning CFG_HZ and not the actual counter incremental frequency. In common/main.c get_ticks is used in conjuction with get_tbclk as if it were get_timer. This indicates either get_tbclk should be returning the actual counter incremental frequency, or get_ticks to return the same value as get_timer(0).

I have looked at the PPC implementation, but that wasn?t of much help because there a hardware time base is used so that solution always correct.

Thanks in advance!

With kind regards,

Robert.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061208/daa777b0/attachment.htm