How to add WiFi support
I have searched and spotted different discussion on adding wireless support but have not found a solution. I have a Intel Centrino Wireless-N 1000 card plugged into a Intel Atom N2800 (Cedar Trail) platform. I am using Yocto Project 1.3.1, Cedar Trail BSP, core-image-x11
BB_VERSION = "1.16.0" TARGET_ARCH = "i586" TARGET_OS = "linux" MACHINE = "cedartrail-nopvr" DISTRO = "poky" DISTRO_VERSION = "1.3.1" TUNE_FEATURES = "m32 core2"
Core-image-x11
Following the instructions to use menuconfig and create configuration fragment, I have enabled the various kernel options to include the iwlagn driver. The configuration fragment called mydiff.cfg (attached) was placed in the meta-intel/meta-cedartrail/recipes-kernel/Linux/files folder. The Linux-yocto_3.0.bbappend was modified with the following:
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"SRC_URI += "file://mydiff.cfg"
After building the image, ifconfig didn't show wireless and neither does iwconfig. The adapter is found when I do a lspci. The kernel wireless website - http://wireless.kernel.org/en/users/Drivers/iwlwifi lists a firmware package needed for installation. I tried to create a recipe to place the firmware file in the /lib/firmware folder, but it doesn't get put in. The lack of what to do for the LICENSE might be a problem. Here is the recipe:
DESCRIPTION = "Intel WiFi 1000 Adapter"
LICENSE = "GPL"-?????LIC_FILES_CHKSUM = "file://${WORKDIR}/LICENSE.iwlwifi-1000-ucode;md5=aa2bfb02c7e0712680334b9f47 f8dc61"
SRC_URI = "file://LICENSE.iwlwifi-1000-ucode \
file://iwlwifi-1000-3.ucode \
"
FWPATH = "lib/firmware"
do_install_apped() {
install -m 0644 LICENSE.iwlwifi-1000-ucode ${D}${FWPATH}
install -m 0644 iwlwifi-1000-3.ucode ${D}${FWPATH}
}I manually created the /lib/firmware folder and copied the firmware file (iwlwifi-1000-3.ucode) to the folder. Nothing changed after a reboot. I also tried a Intel Centrino Ultimate-N 6300 same result.
1. Was a kernel modification the right direction to enable support for this driver?
2. Did I miss anything with regards to the configuration fragment setup?
3. Is the firmware really needed? If so why is there no /lib/firmware folder and what should be used for the LICENSE ?
Regards,
Sean Liming
Quoted 8 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Sean Liming
Sent: Wednesday, July 03, 2013 4:37 PM
To: [email protected]
Subject: [yocto] How to add WiFi supportI have searched and spotted different discussion on adding wireless
support
Quoted 1 line
but have not found a solution. I have a Intel Centrino Wireless-N 1000
card
Quoted 10 lines
plugged into a Intel Atom N2800 (Cedar Trail) platform. I am using Yocto Project 1.3.1, Cedar Trail BSP, core-image-x11
BB_VERSION = "1.16.0" TARGET_ARCH = "i586" TARGET_OS = "linux" MACHINE = "cedartrail-nopvr" DISTRO = "poky" DISTRO_VERSION = "1.3.1" TUNE_FEATURES = "m32 core2"
Quoted 5 lines
Core-image-x11
Following the instructions to use menuconfig and create configuration fragment, I have enabled the various kernel options to include the iwlagn driver. The configuration fragment called mydiff.cfg (attached) was placed
in
Quoted 1 line
the meta-intel/meta-cedartrail/recipes-kernel/Linux/files folder. The
Linux-
Quoted 7 lines
yocto_3.0.bbappend was modified with the following:
FILESEXTRAPATHS_prepend:= "${THISDIR}/files:"SRC_URI+= "file://mydiff.cfg"After building the image, ifconfig didn't show wireless and neither does iwconfig. The adapter is found when I do a lspci. The kernel wireless
website
Quoted 3 lines
- http://wireless.kernel.org/en/users/Drivers/iwlwifi lists a firmware package needed for installation. I tried to create a recipe to place the firmware file in the
/lib/firmwarefolder, but it doesn't get put in. The
lack of
Quoted 18 lines
what to do for the LICENSE might be a problem. Here is the recipe:
DESCRIPTION = "Intel WiFi 1000 Adapter"
LICENSE = "GPL"-?????LIC_FILES_CHKSUM=
"file://${WORKDIR}/LICENSE.iwlwifi-1000-
ucode;md5=aa2bfb02c7e0712680334b9f47
f8dc61"SRC_URI = "file://LICENSE.iwlwifi-1000-ucode \ file://iwlwifi-1000-3.ucode \ " FWPATH = "lib/firmware" do_install_apped() { install -m 0644 LICENSE.iwlwifi-1000-ucode ${D}${FWPATH} install -m 0644 iwlwifi-1000-3.ucode ${D}${FWPATH} }
Quoted 2 lines
I manually created the
/lib/firmwarefolder and copied the firmware file (iwlwifi-1000-3.ucode) to the folder. Nothing changed after a reboot. I
also
Quoted 3 lines
tried a Intel Centrino Ultimate-N 6300 same result.
1. Was a kernel modification the right direction to enable support for
this
Quoted 3 lines
driver?
2. Did I miss anything with regards to the configuration fragment setup?
3. Is the firmware really needed? If so why is there no/lib/firmware
folder
Quoted 6 lines
and what should be used for the LICENSE ?
Regards,
Sean Liming
Update: After checking the /proc/config.gz, I noticed that the custom kernel settings are not being set. Is there specific location for the configuration fragment to be placed? I put it in the BSP's recipes-kernel/Linux/files folder.
After installing Ubuntu on the target, iwlwifi is being used rather than iwlagn. I have a updated my custom config.
Regards,
Sean Liming
Quoted 85 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Sean Liming
Sent: Thursday, July 04, 2013 11:26 AM
To: [email protected]
Subject: Re: [yocto] How to add WiFi supportQuoted 8 lines
-----Original Message-----
From: [email protected] [mailto:yocto- [email protected]] On Behalf Of Sean Liming
Sent: Wednesday, July 03, 2013 4:37 PM
To: [email protected]
Subject: [yocto] How to add WiFi supportI have searched and spotted different discussion on adding wireless
support
Quoted 1 line
but have not found a solution. I have a Intel Centrino Wireless-N 1000
card
Quoted 10 lines
plugged into a Intel Atom N2800 (Cedar Trail) platform. I am using Yocto Project 1.3.1, Cedar Trail BSP, core-image-x11
BB_VERSION = "1.16.0" TARGET_ARCH = "i586" TARGET_OS = "linux" MACHINE = "cedartrail-nopvr" DISTRO = "poky" DISTRO_VERSION = "1.3.1" TUNE_FEATURES = "m32 core2"Quoted 6 lines
Core-image-x11
Following the instructions to use menuconfig and create configuration fragment, I have enabled the various kernel options to include the iwlagn driver. The configuration fragment called mydiff.cfg (attached) was placed
in
Quoted 1 line
the meta-intel/meta-cedartrail/recipes-kernel/Linux/files folder. The
Linux-
Quoted 8 lines
yocto_3.0.bbappend was modified with the following:
FILESEXTRAPATHS_prepend:= "${THISDIR}/files:"SRC_URI+= "file://mydiff.cfg"After building the image, ifconfig didn't show wireless and neither does iwconfig. The adapter is found when I do a lspci. The kernel wireless
website
Quoted 4 lines
- http://wireless.kernel.org/en/users/Drivers/iwlwifi lists a firmware package needed for installation. I tried to create a recipe to place the firmware file in the
/lib/firmwarefolder, but it doesn't get put in. Thelack of
Quoted 18 lines
what to do for the LICENSE might be a problem. Here is the recipe:
DESCRIPTION = "Intel WiFi 1000 Adapter"
LICENSE = "GPL"-?????LIC_FILES_CHKSUM=
"file://${WORKDIR}/LICENSE.iwlwifi-1000-
ucode;md5=aa2bfb02c7e0712680334b9f47
f8dc61"SRC_URI = "file://LICENSE.iwlwifi-1000-ucode \ file://iwlwifi-1000-3.ucode \ " FWPATH = "lib/firmware" do_install_apped() { install -m 0644 LICENSE.iwlwifi-1000-ucode ${D}${FWPATH} install -m 0644 iwlwifi-1000-3.ucode ${D}${FWPATH} }Quoted 4 lines
I manually created the
/lib/firmwarefolder and copied the firmware file
(iwlwifi-1000-3.ucode) to the folder. Nothing changed after a reboot. Ialso
Quoted 3 lines
tried a Intel Centrino Ultimate-N 6300 same result.
1. Was a kernel modification the right direction to enable support for
this
Quoted 3 lines
driver?
2. Did I miss anything with regards to the configuration fragment setup?
3. Is the firmware really needed? If so why is there no/lib/firmwarefolder
Quoted 8 lines
Quoted 6 lines
and what should be used for the LICENSE ?
Regards,
Sean Liming
Update: After checking the
/proc/config.gz, I noticed that the custom
kernel
Quoted 1 line
settings are not being set. Is there specific location for the
configuration
Quoted 1 line
fragment to be placed? I put it in the BSP's recipes-kernel/Linux/files
folder.
Quoted 2 lines
After installing Ubuntu on the target, iwlwifi is being used rather than
iwlagn.
Quoted 11 lines
I have a updated my custom config.
Regards,
Sean Liming
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
SOLVED: Deviated from the documentation to get the configuration fragment working, and found a Linux-firmware package that pulls in the firmware.
Regards,
Sean Liming