help after unsuccessful reduce using e2fsadmin
Hi all,
I have a development box I am playing around with lvm on. I had successfully extended a VG using e2fsadm.
Command was:
e2fsadm -L+24G /dev/vg1/lvol1
I then wanted to reduce it by the same amount:
drsvr02:/root# e2fsadm -L-24G /dev/vg1/lvol1 e2fsck 1.32 (09-Nov-2002) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/vg1/lvol1: 818050/11960320 files (13.1% non-contiguous), 15412825/23920640 blocks resize2fs 1.32 (09-Nov-2002) Begin pass 2 (max = 49740) Relocating blocks XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Begin pass 3 (max = 730) Scanning inode table XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Begin pass 4 (max = 37732) Updating inode references XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXThe filesystem on /dev/vg1/lvol1 is now 17629184 blocks long.
lvreduce -- WARNING: reducing active logical volume to 67.25 GB lvreduce -- THIS MAY DESTROY YOUR DATA (filesystem etc.) lvreduce -- ERROR "No such device or address" reducing logical volume "/dev/vg1/lvol1" in kernel
After the error, I tried to e2fsck and even mount, but:
drsvr02:/root# e2fsck /dev/vg1/lvol1
e2fsck 1.32 (09-Nov-2002)
e2fsck: Attempt to read block from filesystem resulted in short read while
trying to open /dev/vg1/lvol1
Could this be a zero-length partition?
drsvr02:/root# mount /mail
mount: wrong fs type, bad option, bad superblock on /dev/vg1/lvol1,
or too many mounted file systemsVgdisplay still gives me the following:
drsvr02:/root# vgdisplay --- Volume group --- VG Name vg1 VG Access read/write VG Status available/resizable VG # 0 MAX LV 256 Cur LV 1 Open LV 0 MAX LV Size 2 TB Max PV 256 Cur PV 2 Act PV 2 VG Size 92.19 GB PE Size 32 MB Total PE 2950 Alloc PE / Size 2152 / 67.25 GB Free PE / Size 798 / 24.94 GB VG UUID g4xXEb-TpOU-TNBM-TZSc-fbIm-NPw4-wHKrkM
Is there any recovery possibility? Or how do I go about blowing everything away and starting over?
Thanks for any help,
Diane