u-boot compilation for MIPS Au1x00 board
Hi all,
I am compiling u-boot latest version for MIPS processor Au1350.
When I compile I get the following error as mentioned below.
mipsel-linux-ld:
/opt/rmi-linux/db1300/lib/gcc/mipsel-linux/4.2.4/libgcc.a(_lshrdi3.o):
compiled for a little endian system and target is big endian
mipsel-linux-ld:
/opt/rmi-linux/db1300/lib/gcc/mipsel-linux/4.2.4/libgcc.a(_lshrdi3.o):
endianness incompatible with that of the selected emulation
mipsel-linux-ld: failed to merge target specific data of file /opt/rmi-linux/db1300/lib/gcc/mipsel-linux/4.2.4/libgcc.a(_lshrdi3.o)
I am not using ELDK tool chain, we have customized tool chain.
My environment settings are
ARCH=mips
CROSS_COMPILE=mipsel-linux-
Am compiling for dbau1100 board.
But when I use u-boot 1.1.6 version am able to compile the u-boot and creating u-boot.bin image file.
So please let me know what am missing.
is there any issue with the big endian or little endian? Or I need to configure any settings in the dbau1x00.h configuration file?
Thanks & Regards
Gurumurthy Gowdar
KPIT Cummins Infosystems Ltd. | Mobile: +91 9642645725 I E-mail :
gurumurthy.gowdar at kpitcummins.com I www.kpitcummins.com
Client Site - Hyundai MOBIS India Research And Development Pvt. Ltd. |1st Floor , Survey No 5/2 & 5/3,
Backside of NAC, Izzatnagar|(OPP. HitechCity MMTS Railway Station), Lingampally Mandal, Hyderabad - 500081.INDIA
E-mail: Gurumurthy.Gowdar at gmobis.com
This message contains information that may be privileged or confidential and is the property of the KPIT Cummins Infosystems Ltd. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. KPIT Cummins Infosystems Ltd. does not accept any liability for virus infected mails.
P Please don't print this email unless absolutely necessary. Save Trees !
Dear Gurumurthy Gowdar,
Quoted 9 lines · In message <001201cadacb$dc5e8a40$951b9ec0$@[email protected]> you wrote:
I am compiling u-boot latest version for MIPS processor Au1350.
When I compile I get the following error as mentioned below.mipsel-linux-ld:
/opt/rmi-linux/db1300/lib/gcc/mipsel-linux/4.2.4/libgcc.a(_lshrdi3.o):
compiled for a little endian system and target is big endian
This is a tool chain issue. The tool chain is supposed to provide the compiler's support libraries with the same endianess as the target built requires.
Quoted 1 line
I am not using ELDK tool chain, we have customized tool chain.
Then you know already at least one option how to solve the problem :-)
Quoted 1 line
Am compiling for dbau1100 board.
Using ELDK (mips_4KCle) I get:
$ ./MAKEALL dbau1100 Configuring for dbau1x00 board... text data bss dec hex filename 125188 4904 16252 146344 23ba8 /work/wd/tmp-mips/u-boot
--------------------- SUMMARY ---------------------------- Boards compiled: 1
----------------------------------------------------------
Quoted 2 lines
is there any issue with the big endian or little endian? Or I need to configure any settings in the
dbau1x00.hconfiguration file?
No, this is a tool chain issue.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Ja, mach' nur einen Plan, sei nur ein grosses Licht
und mach' dann noch 'nen zweiten Plan, geh'n tun sie beide nicht."
-- Bert Brecht, DreigroschenoperHi,
Thanks for the reply.
Please let me know where I can get the latest version of ELDK for MIPS.
I know about PowerPC (Freescale) as I have worked on MPC82xx and MPC74xx.
Thanks & Regards
Gurumurthy Gowdar
KPIT Cummins Infosystems Ltd.| Mobile: +91 9642645725 |E-mail :
gurumurthy.gowdar at kpitcummins.com|www.kpitcummins.com
Client Site - Hyundai MOBIS India Research And Development Pvt. Ltd. |1st Floor , Survey No 5/2 & 5/3,
Backside of NAC, Izzatnagar|(OPP. HitechCity MMTS Railway Station), Lingampally Mandal, Hyderabad - 500081.INDIA
E-mail: Gurumurthy.Gowdar at gmobis.com
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Tuesday, April 13, 2010 1:23 PM
To: Gurumurthy Gowdar
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] u-boot compilation for MIPS Au1x00 board
Dear Gurumurthy Gowdar,
Quoted 9 lines · In message <001201cadacb$dc5e8a40$951b9ec0$@[email protected]> you wrote:
I am compiling u-boot latest version for MIPS processor Au1350.
When I compile I get the following error as mentioned below.mipsel-linux-ld:
/opt/rmi-linux/db1300/lib/gcc/mipsel-linux/4.2.4/libgcc.a(_lshrdi3.o):
compiled for a little endian system and target is big endian
This is a tool chain issue. The tool chain is supposed to provide the compiler's support libraries with the same endianess as the target built requires.
Quoted 1 line
I am not using ELDK tool chain, we have customized tool chain.
Then you know already at least one option how to solve the problem :-)
Quoted 1 line
Am compiling for dbau1100 board.
Using ELDK (mips_4KCle) I get:
$ ./MAKEALL dbau1100 Configuring for dbau1x00 board... text data bss dec hex filename 125188 4904 16252 146344 23ba8 /work/wd/tmp-mips/u-boot
--------------------- SUMMARY ---------------------------- Boards compiled: 1
----------------------------------------------------------
Quoted 2 lines
is there any issue with the big endian or little endian? Or I need to configure any settings in the
dbau1x00.hconfiguration file?
No, this is a tool chain issue.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Ja, mach' nur einen Plan, sei nur ein grosses Licht
und mach' dann noch 'nen zweiten Plan, geh'n tun sie beide nicht."
-- Bert Brecht, DreigroschenoperDear "Gurumurthy Gowdar",
Quoted 2 lines · In message <000301cadae2$85b053b0$9110fb10$@[email protected]> you wrote:
Please let me know where I can get the latest version of ELDK for MIPS.
ftp://ftp.denx.de/pub/eldk/4.1/mips-linux-x86/iso/mips-2007-01-21.iso
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The computer can't tell you the emotional story. It can give you the exact mathematical design, but what's missing is the eyebrows. - Frank Zappa