serial: remove unnecessary platform_set_drvdata()
Subsystems (6)
PATCH v2 1/1 serial: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by Jingoo Han <[email protected]>
Acked-by Barry Song <[email protected]>
Acked-by Tony Prisk <[email protected]>
Acked-by Shawn Guo <[email protected]>
--- drivers/tty/serial/ar933x_uart.c | 1 - drivers/tty/serial/atmel_serial.c | 1 - drivers/tty/serial/bcm63xx_uart.c | 1 - drivers/tty/serial/clps711x.c | 11 ++--------- drivers/tty/serial/efm32-uart.c | 2 -- drivers/tty/serial/imx.c | 2 -- drivers/tty/serial/netx-serial.c | 2 -- drivers/tty/serial/pmac_zilog.c | 1 - drivers/tty/serial/pnx8xxx_uart.c | 2 -- drivers/tty/serial/pxa.c | 2 -- drivers/tty/serial/sa1100.c | 2 -- drivers/tty/serial/sccnxp.c | 3 --- drivers/tty/serial/sirfsoc_uart.c | 3 +-- drivers/tty/serial/vt8500_serial.c | 1 - 14 files changed, 3 insertions(+), 31 deletions(-)
drivers/tty/serial/ar933x_uart.c +0 -1
@@ -703,7 +703,6 @@ static int ar933x_uart_remove(struct platform_device *pdev)struct ar933x_uart_port *up; up =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL );if (up) {uart_remove_one_port (&ar933x_uart_driver, &up->port);
drivers/tty/serial/atmel_serial.c +0 -1
@@ -1847,7 +1847,6 @@ static int atmel_serial_remove(struct platform_device *pdev)int ret =0 ;device_init_wakeup (&pdev->dev,0 ); -platform_set_drvdata (pdev,NULL ); ret =uart_remove_one_port (&atmel_uart, port);
drivers/tty/serial/bcm63xx_uart.c +0 -1
@@ -852,7 +852,6 @@ static int bcm_uart_remove(struct platform_device *pdev) port =platform_get_drvdata (pdev);uart_remove_one_port (&bcm_uart_driver, port); -platform_set_drvdata (pdev,NULL );/* mark port as free */ ports[pdev->id].membase =0 ;return 0 ;
drivers/tty/serial/clps711x.c +2 -9
@@ -438,8 +438,7 @@ static int uart_clps711x_probe(struct platform_device *pdev) s->uart_clk =devm_clk_get (&pdev->dev,"uart" );if (IS_ERR (s->uart_clk)) {dev_err (&pdev->dev,"Can't get UART clocks\n" ); - ret =PTR_ERR (s->uart_clk); - goto err_out; +return PTR_ERR (s->uart_clk); } s->uart.owner =THIS_MODULE ;
@@ -461,7 +460,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)if (ret) {dev_err (&pdev->dev,"Registering UART driver failed\n" );devm_clk_put (&pdev->dev, s->uart_clk); - goto err_out; +return ret; }for (i =0 ; i <UART_CLPS711X_NR ; i++) {
@@ -478,11 +477,6 @@ static int uart_clps711x_probe(struct platform_device *pdev) }return 0 ; - -err_out: -platform_set_drvdata (pdev,NULL ); - -return ret; }static int uart_clps711x_remove (struct platform_device *pdev)
@@ -495,7 +489,6 @@ static int uart_clps711x_remove(struct platform_device *pdev)devm_clk_put (&pdev->dev, s->uart_clk);uart_unregister_driver (&s->uart); -platform_set_drvdata (pdev,NULL );return 0 ; }
drivers/tty/serial/efm32-uart.c +0 -2
@@ -778,8 +778,6 @@ static int efm32_uart_remove(struct platform_device *pdev) {struct efm32_uart_port *efm_port =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL ); -uart_remove_one_port (&efm32_uart_reg, &efm_port->port);if (pdev->id >=0 && pdev->id <ARRAY_SIZE (efm32_uart_ports))
drivers/tty/serial/imx.c +0 -2
@@ -1605,8 +1605,6 @@ static int serial_imx_remove(struct platform_device *pdev) pdata = pdev->dev.platform_data; -platform_set_drvdata (pdev,NULL ); -uart_remove_one_port (&imx_reg, &sport->port);if (pdata && pdata->exit)
drivers/tty/serial/netx-serial.c +0 -2
@@ -693,8 +693,6 @@ static int serial_netx_remove(struct platform_device *pdev) {struct netx_port *sport =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL ); -if (sport)uart_remove_one_port (&netx_reg, &sport->port);
drivers/tty/serial/pmac_zilog.c +0 -1
@@ -1798,7 +1798,6 @@ static int __exit pmz_detach(struct platform_device *pdev)uart_remove_one_port (&pmz_uart_reg, &uap->port); -platform_set_drvdata (pdev,NULL ); uap->port.dev =NULL ;return 0 ;
drivers/tty/serial/pnx8xxx_uart.c +0 -2
@@ -801,8 +801,6 @@ static int pnx8xxx_serial_remove(struct platform_device *pdev) {struct pnx8xxx_port *sport =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL ); -if (sport)uart_remove_one_port (&pnx8xxx_reg, &sport->port);
drivers/tty/serial/pxa.c +0 -2
@@ -945,8 +945,6 @@ static int serial_pxa_remove(struct platform_device *dev) {struct uart_pxa_port *sport =platform_get_drvdata (dev); -platform_set_drvdata (dev,NULL ); -uart_remove_one_port (&serial_pxa_reg, &sport->port);clk_unprepare (sport->clk);
drivers/tty/serial/sa1100.c +0 -2
@@ -864,8 +864,6 @@ static int sa1100_serial_remove(struct platform_device *pdev) {struct sa1100_port *sport =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL ); -if (sport)uart_remove_one_port (&sa1100_reg, &sport->port);
drivers/tty/serial/sccnxp.c +0 -3
@@ -997,8 +997,6 @@ static int sccnxp_probe(struct platform_device *pdev) } err_out: -platform_set_drvdata (pdev,NULL ); -return ret; }
@@ -1016,7 +1014,6 @@ static int sccnxp_remove(struct platform_device *pdev)uart_remove_one_port (&s->uart, &s->port[i]);uart_unregister_driver (&s->uart); -platform_set_drvdata (pdev,NULL );if (!IS_ERR (s->regulator))return regulator_disable (s->regulator);
drivers/tty/serial/sirfsoc_uart.c +1 -2
@@ -717,7 +717,6 @@ port_err:clk_disable_unprepare (sirfport->clk);clk_put (sirfport->clk); clk_err: -platform_set_drvdata (pdev,NULL );if (sirfport->hw_flow_ctrl)pinctrl_put (sirfport->p); err:
@@ -728,7 +727,7 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) {struct sirfsoc_uart_port *sirfport =platform_get_drvdata (pdev);struct uart_port *port = &sirfport->port; -platform_set_drvdata (pdev,NULL ); +if (sirfport->hw_flow_ctrl)pinctrl_put (sirfport->p);clk_disable_unprepare (sirfport->clk);
drivers/tty/serial/vt8500_serial.c +0 -1
@@ -630,7 +630,6 @@ static int vt8500_serial_remove(struct platform_device *pdev) {struct vt8500_port *vt8500_port =platform_get_drvdata (pdev); -platform_set_drvdata (pdev,NULL );clk_disable_unprepare (vt8500_port->clk);uart_remove_one_port (&vt8500_uart_driver, &vt8500_port->uart);
Signature · 1 line
1.7.10.4