PCI: imx6: Remove unneeded check of platform_get_resource()
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/2 PCI: imx6: Remove unneeded check of platform_get_resource()
From: Fabio Estevam <[email protected]>
When using devm_ioremap_resource(), we do not need to check the return value of platform_get_resource(), so just remove it.
--- drivers/pci/host/pci-imx6.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/pci/host/pci-imx6.c +0 -5
@@ -426,11 +426,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "imprecise external abort"); dbi_base =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); -if (!dbi_base) { -dev_err (&pdev->dev,"dbi_base memory resource not found\n" ); -return -ENODEV ; - } - pp->dbi_base =devm_ioremap_resource (&pdev->dev, dbi_base);if (IS_ERR (pp->dbi_base)) { ret =PTR_ERR (pp->dbi_base);
Signature · 1 line
1.8.1.2
Fabio Estevam
reviewerPATCH 2/2 PCI: imx6: Remove unneeded 'goto err'
From: Fabio Estevam <[email protected]>
There is no need to use 'goto err' as we can directly return the errors.
--- drivers/pci/host/pci-imx6.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-)
drivers/pci/host/pci-imx6.c +12 -22
@@ -427,10 +427,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) dbi_base =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); pp->dbi_base =devm_ioremap_resource (&pdev->dev, dbi_base); -if (IS_ERR (pp->dbi_base)) { - ret =PTR_ERR (pp->dbi_base); - goto err; - } +if (IS_ERR (pp->dbi_base)) +return PTR_ERR (pp->dbi_base);/* Fetch GPIOs */ imx6_pcie->reset_gpio =of_get_named_gpio (np,"reset-gpio" ,0 );
@@ -444,7 +442,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe reset");if (ret) {dev_err (&pdev->dev,"unable to get reset gpio\n" ); - goto err; +return ret; } imx6_pcie->power_on_gpio =of_get_named_gpio (np,"power-on-gpio" ,0 );
@@ -455,7 +453,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe power enable");if (ret) {dev_err (&pdev->dev,"unable to get power-on gpio\n" ); - goto err; +return ret; } }
@@ -467,7 +465,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe wake up");if (ret) {dev_err (&pdev->dev,"unable to get wake-up gpio\n" ); - goto err; +return ret; } }
@@ -479,7 +477,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe disable endpoint");if (ret) {dev_err (&pdev->dev,"unable to get disable-ep gpio\n" ); - goto err; +return ret; } }
@@ -488,32 +486,28 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)if (IS_ERR (imx6_pcie->lvds_gate)) {dev_err (&pdev->dev,"lvds_gate clock select missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->lvds_gate); - goto err; +return PTR_ERR (imx6_pcie->lvds_gate); } imx6_pcie->sata_ref_100m =devm_clk_get (&pdev->dev,"sata_ref_100m" );if (IS_ERR (imx6_pcie->sata_ref_100m)) {dev_err (&pdev->dev,"sata_ref_100m clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->sata_ref_100m); - goto err; +return PTR_ERR (imx6_pcie->sata_ref_100m); } imx6_pcie->pcie_ref_125m =devm_clk_get (&pdev->dev,"pcie_ref_125m" );if (IS_ERR (imx6_pcie->pcie_ref_125m)) {dev_err (&pdev->dev,"pcie_ref_125m clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->pcie_ref_125m); - goto err; +return PTR_ERR (imx6_pcie->pcie_ref_125m); } imx6_pcie->pcie_axi =devm_clk_get (&pdev->dev,"pcie_axi" );if (IS_ERR (imx6_pcie->pcie_axi)) {dev_err (&pdev->dev,"pcie_axi clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->pcie_axi); - goto err; +return PTR_ERR (imx6_pcie->pcie_axi); }/* Grab GPR config register range */
@@ -521,19 +515,15 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)syscon_regmap_lookup_by_compatible ("fsl,imx6q-iomuxc-gpr" );if (IS_ERR (imx6_pcie->iomuxc_gpr)) {dev_err (&pdev->dev,"unable to find iomuxc registers\n" ); - ret =PTR_ERR (imx6_pcie->iomuxc_gpr); - goto err; +return PTR_ERR (imx6_pcie->iomuxc_gpr); } ret =imx6_add_pcie_port (pp, pdev);if (ret <0 ) - goto err; +return ret;platform_set_drvdata (pdev, imx6_pcie);return 0 ; - -err: -return ret; }static const struct of_device_id imx6_pcie_of_match[] = {
Signature · 1 line
1.8.1.2
Re: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Dear Fabio Estevam,
Quoted 5 lines
From: Fabio Estevam <[email protected]>
There is no need to use 'goto err' as we can directly return the errors.
Signed-off-by Fabio Estevam <[email protected]>
I am a bit worried about unwinding of the installation of the DABT hook:
424 /* Added for PCI abort handling */
425 hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
426 "imprecise external abort");
This is not handled in the fail path. Instead of this patch, would it be possible for you to fix the failpath to take this part into consideration?
Another option, and I think even a better one, would be to move this DABT handler installation just before imx6_add_pcie_port() call. You'd still need to handle it's de-installation in remove(), but you won't have so many functions in probe() goto-ing to fail path.
Best regards,
Marek Vasut
Fabio Estevam
reviewerRe: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Hi Marek,
Quoted 8 lines · Marek Vasut
I am a bit worried about unwinding of the installation of the DABT hook:
424 /* Added for PCI abort handling */
425 hook_fault_code(16 + 6,imx6q_pcie_abort_handler, SIGBUS, 0,
426 "imprecise external abort");This is not handled in the fail path. Instead of this patch, would it be possible for you to fix the failpath to take this part into consideration?
IMHO this would be subject of a separate patch. This one does not change any current behavior.
Quoted 5 lines
Another option, and I think even a better one, would be to move this DABT handler installation just before
imx6_add_pcie_port()call. You'd still need to handle it's de-installation inremove(), but you won't have so many functions inprobe()goto-ing to fail path.
How do we 'uninstall' this DABT handler installation?
Regards,
Fabio Estevam
Re: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Quoted 9 lines · Fabio Estevam
Hi Marek,
Quoted 6 lines · Marek Vasut
I am a bit worried about unwinding of the installation of the DABT hook:
424 /* Added for PCI abort handling */
425 hook_fault_code(16 + 6,imx6q_pcie_abort_handler, SIGBUS, 0,
426 "imprecise external abort");
Quoted 6 lines
Quoted 3 lines
This is not handled in the fail path. Instead of this patch, would it be possible for you to fix the failpath to take this part into consideration?
IMHO this would be subject of a separate patch. This one does not change any current behavior.
The current behavior is botched then. If this would be compilable as a module and you removed this module, this hook would also cease to exist and if something triggered this type of DABT, the whole kernel would explode. I suppose noone will compile this as a module in the first place, but let's play safe ;-)
Quoted 6 lines
Quoted 4 lines
Another option, and I think even a better one, would be to move this DABT handler installation just before
imx6_add_pcie_port()call. You'd still need to handle it's de-installation inremove(), but you won't have so many functions inprobe()goto-ing to fail path.How do we 'uninstall' this DABT handler installation?
I think you should call hook_fault_code() again, but this time you should specify the old values that were in the fault handler table before.
Best regards,
Marek Vasut
Fabio Estevam
reviewerRe: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Quoted 1 line · Marek Vasut
The current behavior is botched then. If this would be compilable as a module
Right, so a separate patch needs to be done in order to fix current behavior.
Regards,
Fabio Estevam
Bjorn Helgaas
maintainerRe: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
In reply to Fabio EstevamQuoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
There is no need to use 'goto err' as we can directly return the errors.
Signed-off-by Fabio Estevam <[email protected]>
Since there's no functional change, I also applied this one to pci/host-imx6 for v3.14. I agree that leaving the DABT handler installed is a bug and should be fixed by another patch.
Bjorn
Quoted 119 lines
--- drivers/pci/host/pci-imx6.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-)drivers/pci/host/pci-imx6.c +12
-22@@ -427,10 +427,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) dbi_base =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); pp->dbi_base =devm_ioremap_resource (&pdev->dev, dbi_base); -if (IS_ERR (pp->dbi_base)) { - ret =PTR_ERR (pp->dbi_base); - goto err; - } +if (IS_ERR (pp->dbi_base)) +return PTR_ERR (pp->dbi_base);/* Fetch GPIOs */ imx6_pcie->reset_gpio =of_get_named_gpio (np,"reset-gpio" ,0 );@@ -444,7 +442,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe reset");if (ret) {dev_err (&pdev->dev,"unable to get reset gpio\n" ); - goto err; +return ret; } imx6_pcie->power_on_gpio =of_get_named_gpio (np,"power-on-gpio" ,0 );@@ -455,7 +453,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe power enable");if (ret) {dev_err (&pdev->dev,"unable to get power-on gpio\n" ); - goto err; +return ret; } }@@ -467,7 +465,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe wake up");if (ret) {dev_err (&pdev->dev,"unable to get wake-up gpio\n" ); - goto err; +return ret; } }@@ -479,7 +477,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "PCIe disable endpoint");if (ret) {dev_err (&pdev->dev,"unable to get disable-ep gpio\n" ); - goto err; +return ret; } }@@ -488,32 +486,28 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)if (IS_ERR (imx6_pcie->lvds_gate)) {dev_err (&pdev->dev,"lvds_gate clock select missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->lvds_gate); - goto err; +return PTR_ERR (imx6_pcie->lvds_gate); } imx6_pcie->sata_ref_100m =devm_clk_get (&pdev->dev,"sata_ref_100m" );if (IS_ERR (imx6_pcie->sata_ref_100m)) {dev_err (&pdev->dev,"sata_ref_100m clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->sata_ref_100m); - goto err; +return PTR_ERR (imx6_pcie->sata_ref_100m); } imx6_pcie->pcie_ref_125m =devm_clk_get (&pdev->dev,"pcie_ref_125m" );if (IS_ERR (imx6_pcie->pcie_ref_125m)) {dev_err (&pdev->dev,"pcie_ref_125m clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->pcie_ref_125m); - goto err; +return PTR_ERR (imx6_pcie->pcie_ref_125m); } imx6_pcie->pcie_axi =devm_clk_get (&pdev->dev,"pcie_axi" );if (IS_ERR (imx6_pcie->pcie_axi)) {dev_err (&pdev->dev,"pcie_axi clock source missing or invalid\n" ); - ret =PTR_ERR (imx6_pcie->pcie_axi); - goto err; +return PTR_ERR (imx6_pcie->pcie_axi); }/* Grab GPR config register range */ @@ -521,19 +515,15 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)syscon_regmap_lookup_by_compatible ("fsl,imx6q-iomuxc-gpr" );if (IS_ERR (imx6_pcie->iomuxc_gpr)) {dev_err (&pdev->dev,"unable to find iomuxc registers\n" ); - ret =PTR_ERR (imx6_pcie->iomuxc_gpr); - goto err; +return PTR_ERR (imx6_pcie->iomuxc_gpr); } ret =imx6_add_pcie_port (pp, pdev);if (ret <0 ) - goto err; +return ret;platform_set_drvdata (pdev, imx6_pcie);return 0 ; - -err: -return ret; }static const struct of_device_id imx6_pcie_of_match[] = {Signature · 1 line
1.8.1.2
Re: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Quoted 10 lines · Bjorn Helgaas
Quoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
There is no need to use 'goto err' as we can directly return the errors.
Signed-off-by Fabio Estevam <[email protected]>Since there's no functional change, I also applied this one to pci/host-imx6 for v3.14. I agree that leaving the DABT handler installed is a bug and should be fixed by another patch.
I also agree with Bjorn's opinion. :-)
Fixing the DABT handler problem can be sent as another patch.
Best regards,
Jingoo Han
Re: [PATCH 2/2] PCI: imx6: Remove unneeded 'goto err'
Quoted 7 lines · Jingoo Han
Quoted 6 lines · Bjorn Helgaas
Quoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
There is no need to use 'goto err' as we can directly return the errors.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Fabio Estevam <[email protected]>Since there's no functional change, I also applied this one to pci/host-imx6 for v3.14. I agree that leaving the DABT handler installed is a bug and should be fixed by another patch.
I also agree with Bjorn's opinion. :-)
Fixing the DABT handler problem can be sent as another patch.
Hm, actually I suspect we cannot un-install the handler. See arch/arm/mm/fault.c , the hook_fault_code() call is annotated __init , so it disappears after the init sequence finishes. This basically leaves us with disallowing the mx6 pcie driver to be removed from kernel (don't let it compile as a module), which I dont think is much of a problem anyway.
Best regards,
Marek Vasut
Dear Fabio Estevam,
Quoted 6 lines
From: Fabio Estevam <[email protected]>
When using
devm_ioremap_resource(), we do not need to check the return value ofplatform_get_resource(), so just remove it.Signed-off-by Fabio Estevam <[email protected]>
Quoted 10 lines
--- drivers/pci/host/pci-imx6.c | 5 ----- 1 file changed, 5 deletions(-)drivers/pci/host/pci-imx6.c +0
-0@@ -426,11 +426,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "imprecise external abort");
drivers/pci/host/pci-imx6.c static int __init imx6_pcie_probe(struct · line 431
Quoted 10 lines
drivers/pci/host/pci-imx6.c +0
-5dbi_base =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); -if (!dbi_base) { -dev_err (&pdev->dev,"dbi_base memory resource not found\n" ); -return -ENODEV ; - } - pp->dbi_base =devm_ioremap_resource (&pdev->dev, dbi_base);if (IS_ERR (pp->dbi_base)) { ret =PTR_ERR (pp->dbi_base);
Best regards,
Marek Vasut
[+cc Shawn]
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
When using
devm_ioremap_resource(), we do not need to check the return value ofplatform_get_resource(), so just remove it.Signed-off-by Fabio Estevam <[email protected]>
I applied this with Marek's ack to pci/host-imx6 for v3.14.
Shawn, let me know if you object. It looks correct to me because devm_ioremap_resource() checks for res being NULL.
Quoted 23 lines
--- drivers/pci/host/pci-imx6.c | 5 ----- 1 file changed, 5 deletions(-)drivers/pci/host/pci-imx6.c +0
-5@@ -426,11 +426,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) "imprecise external abort"); dbi_base =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); -if (!dbi_base) { -dev_err (&pdev->dev,"dbi_base memory resource not found\n" ); -return -ENODEV ; - } - pp->dbi_base =devm_ioremap_resource (&pdev->dev, dbi_base);if (IS_ERR (pp->dbi_base)) { ret =PTR_ERR (pp->dbi_base);Signature · 1 line
1.8.1.2