HTB classifying
Maybe it's my oversight but shoudn't you have "tc qdisc add dev eth0 root handle 1:0 htb" before rest of your instructions ??
Quoted 12 lines
I am trying to shape a client (somewhat advanced).
This is my target:
Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000 bit/sec. (500000 generally + 300000 on port 22)
I thought that having classes 1:11 and 1:12 being children of a class with rate 500000, 500000 would be the maximum...
Can htb to this? Can another queue do this?
Quoted 4 lines
/sbin/tcclass add dev eth0 parent 1: classid 1:10 htb rate 500000
/sbin/tcclass add dev eth0 parent 1:10 classid 1:11 htb rate 300000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
src 192.168.2.224/32 \
Quoted 4 lines
match ip sport 80
0xffffclassid 1:11
/sbin/tcclass add dev eth0 parent 1:10 classid 1:12 htb rate 500000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip
src 192.168.2.224/32 classid 1:12
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
OK what's the address of eth0? Is the BOX with NAT ?
I think you could send a bit of your true script and describe a bit of your network especially the part when this situation is happeniing . If you really afraid of smth like hack attack change IP adressess.
Quoted 4 lines
Although i have done so ,you are right. I should have included this too in my (e-mail) configuration...
BTW,Any idea of the situation
Quoted 8 lines
----- Original Message -----
From: <[email protected]>
To: "lartc" <[email protected]>; "Mpourtounis Dimitris" <[email protected]>
Sent: Friday, January 24, 2003 1:21 AM
Subject: Re: [LARTC] HTB classifyingQuoted 1 line
Maybe it's my oversight but shoudn't you have "tc qdisc add dev eth0
root
Quoted 9 lines
Quoted 9 lines
handle 1:0 htb" before rest of your instructions ??
Quoted 7 lines
I am trying to shape a client (somewhat advanced).
This is my target:
Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000
bit/sec.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
(500000 generally + 300000 on port 22)
I thought that having classes 1:11 and 1:12 being children of a class with rate 500000, 500000 would be the maximum...
Can htb to this? Can another queue do this?
/sbin/tcclass add dev eth0 parent 1: classid 1:10 htb rate 500000
/sbin/tcclass add dev eth0 parent 1:10 classid 1:11 htb rate 300000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32 match
Quoted 15 lines
ip
Quoted 5 lines
src 192.168.2.224/32 \
Quoted 4 lines
match ip sport 80
0xffffclassid 1:11
/sbin/tcclass add dev eth0 parent 1:10 classid 1:12 htb rate 500000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32 matchip
Quoted 6 lines
src 192.168.2.224/32 classid 1:12
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Martin Brown has right but his answer is not full.
I see at least one error in your script.
I see you arew shaping on wlan0. You must know that you can only shape outgoing traffic so if your node is downloading by ftp i'ts ok, but if the node start to upload shaping on wlan0 won't work. In that case you must shape on eth0.
And second thing:
Because you shape towards 192.168.2.224 you can not write ...ip src 192.168.2.224/32.....
You must write ...ip dst 192.168.2.224.
Quoted 3 lines
/sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 \
match ip src 192.168.2.224/32 \
match ip sport 80 0xffff classid 1:11Take some more reading :)
Good luck.
----- Original Message -----
From: "Mpourtounis Dimitris" <[email protected]>
To: "lartc" <[email protected]>
Sent: Saturday, July 24, 2004 11:39 PM
Subject: Re: [LARTC] HTB classifying
Quoted 52 lines
Ok then...
BOX with 2 ifaces
eth0 : 192.168.1.3/24 , NAT 192.168.2.0/24 wlan0: 192.168.2.3/24 ,gw 192.168.1.1(it is an adsl mode in fact)
All i want to do is make sure that
a)node 192.168.2.224 doesnt get more than 500000 bits/sec b)its ssh,sftp (port 22) traffic is limited at 300000 bits/secand
c)add more shaped nodes in my script.When i start downloading from node, its http taffic for examle is really shaped
at 500000.
When i start downloading via sftp (port 22), its sftp traffic is really shaped
at 300000.
But, if when there is an http as well as an sftp session at the same time, total bandwidth
is at 800000.Thanks in advance (and sorry for being so short, i will get used to explaining my problems
briefly...)#My.notworking.script
/sbin/tcqdisc add dev wlan0 root handle 1:0 htb r2q 100/sbin/tcclass add dev wlan0 parent 1: classid 1:10 htb rate 500000
/sbin/tcclass add dev wlan0 parent 1:10 classid 1:11 htb rate 300000/sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 \ match ip src 192.168.2.224/32 \ match ip sport 80 0xffff classid 1:11
/sbin/tcclass add dev wlan0 parent 1:10 classid 1:12 htb rate 500000/sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 match \ ip src 192.168.2.224/32 classid 1:12----- Original Message -----
From: <[email protected]>
To: "lartc" <[email protected]>; "Mpourtounis Dimitris" <[email protected]>
Sent: Friday, January 24, 2003 2:13 AM
Subject: Re: [LARTC] HTB classifying
Quoted 7 lines
Quoted 2 lines
OK what's the address of eth0? Is the BOX with NAT ?
I think you could send a bit of your true script and describe a bit ofyour
Quoted 4 lines
network especially the part when this situation is happeniing . If you really afraid of smth like hack attack change IP adressess.
Quoted 1 line
Although i have done so ,you are right. I should have included this
too
Quoted 13 lines
in
Quoted 6 lines
Quoted 6 lines
my (e-mail) configuration...
BTW,Any idea of the situation----- Original Message -----
From: <[email protected]>
To: "lartc" <[email protected]>; "Mpourtounis Dimitris"Quoted 5 lines
Quoted 5 lines
Sent: Friday, January 24, 2003 1:21 AM
Subject: Re: [LARTC] HTB classifyingQuoted 1 line
Maybe it's my oversight but shoudn't you have "tc qdisc add dev
eth0
Quoted 7 lines
Quoted 7 lines
root
Quoted 6 lines
Quoted 6 lines
handle 1:0 htb" before rest of your instructions ??
Quoted 4 lines
I am trying to shape a client (somewhat advanced).
This is my target:
Client is 192.168.2.224. I would like to allow him to download
with
Quoted 15 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
500000 bits/sec in general. But, for a specific port(say 22), i
would
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
like him to download with 300000 bit/sec only. The problem is that
my
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
configuration (maybe wrong) allows him to download with 800000
bit/sec.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
(500000 generally + 300000 on port 22)
I thought that having classes 1:11 and 1:12 being children of aclass
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
with rate 500000, 500000 would be the maximum...
Can htb to this? Can another queue do this?
/sbin/tcclass add dev eth0 parent 1: classid 1:10 htb rate 500000
/sbin/tcclass add dev eth0 parent 1:10 classid 1:11 htb rate
300000
Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32match
Quoted 5 lines
Quoted 5 lines
ip
Quoted 4 lines
src 192.168.2.224/32 \
Quoted 3 lines
match ip sport 80
0xffffclassid 1:11
/sbin/tcclass add dev eth0 parent 1:10 classid 1:12 htb rate
500000
Quoted 15 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32match
Quoted 7 lines
Quoted 7 lines
ip
Quoted 6 lines
src 192.168.2.224/32 classid 1:12
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:Quoted 3 lines
Quoted 2 lines
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I am trying to shape a client (somewhat advanced).
This is my target:
Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000 bit/sec. (500000 generally + 300000 on port 22)
I thought that having classes 1:11 and 1:12 being children of a class with rate 500000, 500000 would be the maximum...
Can htb to this? Can another queue do this?
/sbin/tc class add dev eth0 parent 1: classid 1:10 htb rate 500000
/sbin/tc class add dev eth0 parent 1:10 classid 1:11 htb rate 300000
/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip src 192.168.2.224/32 \ match ip sport 80 0xffff classid 1:11
/sbin/tc class add dev eth0 parent 1:10 classid 1:12 htb rate 500000/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip src 192.168.2.224/32 classid 1:12
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Ok then...
BOX with 2 ifaces
eth0 : 192.168.1.3/24 , NAT 192.168.2.0/24 wlan0: 192.168.2.3/24 ,
gw 192.168.1.1(it is an adsl mode in fact)
All i want to do is make sure that
a)node 192.168.2.224 doesnt get more than 500000 bits/sec b)its ssh,sftp (port 22) traffic is limited at 300000 bits/sec
and
c)add more shaped nodes in my script.
When i start downloading from node, its http taffic for examle is really shaped
at 500000.
When i start downloading via sftp (port 22), its sftp traffic is really shaped
at 300000.
But, if when there is an http as well as an sftp session at the same time, total bandwidth
is at 800000.
Thanks in advance (and sorry for being so short, i will get used to explaining my problems
briefly...)
#My.notworking.script/sbin/tc qdisc add dev wlan0 root handle 1:0 htb r2q 100 /sbin/tc class add dev wlan0 parent 1: classid 1:10 htb rate 500000
/sbin/tc class add dev wlan0 parent 1:10 classid 1:11 htb rate 300000
/sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 \
match ip src 192.168.2.224/32 \
match ip sport 80 0xffff classid 1:11/sbin/tc class add dev wlan0 parent 1:10 classid 1:12 htb rate 500000
/sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 match \
ip src 192.168.2.224/32 classid 1:12----- Original Message -----
From: <[email protected]>
To: "lartc" <[email protected]>; "Mpourtounis Dimitris" <[email protected]>
Sent: Friday, January 24, 2003 2:13 AM
Subject: Re: [LARTC] HTB classifying
Quoted 2 lines
OK what's the address of eth0? Is the BOX with NAT ?
I think you could send a bit of your true script and describe a bit of
your
Quoted 4 lines
network especially the part when this situation is happeniing . If you really afraid of smth like hack attack change IP adressess.
Quoted 1 line
Although i have done so ,you are right. I should have included this too
in
Quoted 6 lines
Quoted 6 lines
my (e-mail) configuration...
BTW,Any idea of the situation----- Original Message -----
From: <[email protected]>
To: "lartc" <[email protected]>; "Mpourtounis Dimitris"
Quoted 4 lines
Quoted 4 lines
Sent: Friday, January 24, 2003 1:21 AM
Subject: Re: [LARTC] HTB classifying
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Maybe it's my oversight but shoudn't you have "tc qdisc add dev eth0
root
Quoted 7 lines
Quoted 7 lines
handle 1:0 htb" before rest of your instructions ??
Quoted 5 lines
I am trying to shape a client (somewhat advanced).
This is my target:
Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i
would
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
like him to download with 300000 bit/sec only. The problem is that
my
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
configuration (maybe wrong) allows him to download with 800000
bit/sec.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
(500000 generally + 300000 on port 22)
I thought that having classes 1:11 and 1:12 being children of a
class
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
with rate 500000, 500000 would be the maximum...
Can htb to this? Can another queue do this?
/sbin/tcclass add dev eth0 parent 1: classid 1:10 htb rate 500000
/sbin/tcclass add dev eth0 parent 1:10 classid 1:11 htb rate 300000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32
match
Quoted 6 lines
Quoted 6 lines
ip
Quoted 5 lines
src 192.168.2.224/32 \
Quoted 4 lines
match ip sport 80
0xffffclassid 1:11
/sbin/tcclass add dev eth0 parent 1:10 classid 1:12 htb rate 500000/sbin/tcfilter add dev eth0 parent 1:0 protocol ip prio 100 u32
match
Quoted 7 lines
Quoted 7 lines
ip
Quoted 6 lines
src 192.168.2.224/32 classid 1:12
Quoted 5 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
Quoted 3 lines
Quoted 2 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Mpourtounis,
: When i start downloading from node, its http taffic for examle is : really shaped at 500000. When i start downloading via sftp (port 22), : its sftp traffic is really shaped at 300000. But, if when there is an : http as well as an sftp session at the same time, total bandwidth is at : 800000.
You are missing one key piece in your understanding of HTB and that is the difference between using "rate" and using "ceil".
: /sbin/tc qdisc add dev wlan0 root handle 1:0 htb r2q 100
: /sbin/tc class add dev wlan0 parent 1: classid 1:10 htb rate 500000 :
: /sbin/tc class add dev wlan0 parent 1:10 classid 1:11 htb rate 300000 : /sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 \
: match ip src 192.168.2.224/32 \
: match ip sport 80 0xffff classid 1:11
:
: /sbin/tc class add dev wlan0 parent 1:10 classid 1:12 htb rate 500000 : /sbin/tc filter add dev wlan0 parent 1:0 protocol ip prio 100 u32 match \
: ip src 192.168.2.224/32 classid 1:12
You have a class structure which looks roughly like this:
class 1:10, rate 500000 [ ceil 500000 ]
|
+-class 1:11, rate 300000 [ ceil 300000 ] (rate M)
\
class 1:12, rate 500000 [ ceil 500000 ] (rate L)Because you have specified a rate in each leaf class (1:11 and 1:12), your two leaf classes are getting the guaranteed 'rate'. You have guaranteed rate M, 300000 (units???) (seems to be 37500bps with my tc) to your class 1:11. You have guaranteed rate L to your class 1:12. HTB will dequeue packets entering this class until rate without examining any other parent class. Because each class is getting its guaranteed rate, HTB is effectively transmitting (dequeuing) packets at 800000 (300000 + 500000).
I believe you wish to do the following. Note that I have used the same ratios, but have eliminated some zeroes and changed the units, but simply for readability.
class 1:10, rate 500 kbps, ceil 500 kbps
|
+-class 1:11, rate 100 kbps, ceil 300 kbps
\
class 1:12, rate 400 kbps, ceil 500 kbpsThes means that classes 1:11 and 1:12 can transmit up to rates 100 kbps and 400 kbps respectively before HTB starts to calculate borrowing. For more on the borrowing model, see [0], [1] and [2]. The rule you are unwittingly violating is this rule [3].
In short, since HTB will not check any rates or perform any shaping or borrowing until rate is met (exceeded), you must make sure that the sum of the rates of your leaf classes does not exceed the parent classes.
As a final note, if you wish to limit your total outgoing bandwidth to only 500000 and let HTB help a bit with the borrowing, I would recommend the following model:
class 1:10, rate 500000, ceil 500000
|
+-class 1:11, rate 100000, ceil 300000
\
class 1:12, rate 200000, ceil 500000Best of luck,
-Martin
[0] http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#hsharing
[1] http://tldp.org/HOWTO/Traffic-Control-HOWTO/classful-qdiscs.html#qc-htb-borrowing
[2] http://opalsoft.net/qos/DS-28.htm
[3] http://www.docum.org/docum.org/faq/cache/13.html
P.S. Just a reminder that with the command line "tc", kbps means kilobytes
per second. If you want to talk about kilobits per second, use kbit.
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/