meshctl: Status messages processed even if they do not belong to the model

Fix: The status messages was processed and displayed even if they do not belong to the present model. Now the status messages are processed only if they have the correct opcode.
Addition: Added generic onoff set unack message
Addition: Replaced the return statement with a warning message in case of transmission or reception of messages coming from unknown addresses (such as group addresses)

---
 tools/mesh/node.c        | 11 ++++++++
 tools/mesh/onoff-model.c | 56 +++++++++++++++++++++++++---------------
 2 files changed, 46 insertions(+), 21 deletions(-)

index d23315ce4..3171ef01a 100644
@@ -475,6 +475,8 @@ static bool deliver_model_data(struct mesh_element*

element, uint16_t src,
uint16_t app_idx, uint8_t *data, uint16_t
len)
{
GList *l;
+ uint32_t opcode;
+ int n;

for(l = element->models; l; l = l->next) {
struct mesh_model *model = l->data;
@@ -487,6 +489,15 @@ static bool deliver_model_data(struct mesh_element* element, uint16_t src,
return true;
}

+ if (mesh_opcode_get(data, len, &opcode, &n)) {
+ len -= n;
+ data += n;
+ } else
+ return false;
+ bt_shell_printf("Unknown Model Message received (%d) opcode %x\n",
+ len, opcode);
+ print_byte_array("\t",data, len);
+
return false;
}

index b52afe2c8..8c41e005d 100644
@@ -111,6 +111,7 @@ static bool client_msg_recvd(uint16_t src, uint8_t

*data,
{
uint32_t opcode;
int n;
+ char s[128];

if (mesh_opcode_get(data, len, &opcode, &n)) {
len -= n;
@@ -118,27 +119,27 @@ static bool client_msg_recvd(uint16_t src, uint8_t *data,
} else
return false;

- bt_shell_printf("On Off Model Message received (%d) opcode %x\n",
- len,
opcode);
- print_byte_array("\t",data, len);
-
switch (opcode & ~OP_UNRELIABLE) {
default:
return false;

case OP_GENERIC_ONOFF_STATUS:
+ bt_shell_printf("On Off Model Message received (%d) opcode
%x\n",
+ len, opcode);
+ print_byte_array("\t",data, len);
if (len != 1 && len != 3)
break;

- bt_shell_printf("Node %4.4x: Off Status present = %s",
- src, data[0] ? "ON" :
"OFF");
-
+ sprintf(s, "Node %4.4x: On Off Status present = %s",
+ src, data[0] ? "ON" : "OFF");
if (len == 3) {
- bt_shell_printf(", target = %s",
- data[1] ? "ON" : "OFF");
+ sprintf(s, ", target = %s",
+ data[1] ? "ON" : "OFF");
+ bt_shell_printf("%s\n", s);
print_remaining_time(data[2]);
- } else
- bt_shell_printf("\n");
+ }else
+ bt_shell_printf("%s\n", s);
+
break;
}

@@ -220,8 +221,9 @@ static void cmd_get_status(int argc, char *argv[])

node = node_find_by_addr(target);

- if (!node)
- return;
+ if (!node){
+ bt_shell_printf("Warning: node %4.4x not found in
database\n",target);
+ }

n = mesh_opcode_set(OP_GENERIC_ONOFF_GET, msg);

@@ -238,6 +240,8 @@ static void cmd_set(int argc, char *argv[])
uint16_t n;
uint8_t msg[32];
struct mesh_node *node;
+ int np;
+ uint32_t opcode;

if (IS_UNASSIGNED(target)) {
bt_shell_printf("Destination not set\n");
@@ -246,16 +250,26 @@ static void cmd_set(int argc, char *argv[])

node = node_find_by_addr(target);

- if (!node)
- return;
+ if (!node){
+ bt_shell_printf("Warning: node %4.4x not found in
database\n",target);
+ }

- if ((read_input_parameters(argc, argv) != 1) &&
- parms[0] != 0 && parms[0] != 1) {
- bt_shell_printf("Bad arguments: Expecting \"0\" or
\"1\"\n");
- return bt_shell_noninteractive_quit(EXIT_FAILURE);
+ np = read_input_parameters(argc, argv);
+ if ((np != 1) && (np != 2) &&
+ parms[0] != 0 && parms[0] != 1 &&
+ parms[1] != 0 && parms[1] != 1) {
+ bt_shell_printf("Bad arguments: Expecting \"0\" or \"1\" "
+ "and an optional \"0\" or \"1\" as unack\n");
+ return bt_shell_noninteractive_quit(EXIT_FAILURE);
+ }
+
+ if( (np==2) && parms[1] ){
+ opcode = OP_GENERIC_ONOFF_SET_UNACK;
+ }else{
+ opcode = OP_GENERIC_ONOFF_SET;
}

- n = mesh_opcode_set(OP_GENERIC_ONOFF_SET, msg);
+ n = mesh_opcode_set(opcode, msg);
msg[n++] = parms[0];
msg[n++] = trans_id++;

@@ -275,7 +289,7 @@ static const struct bt_shell_menu onoff_menu = {
"Set node to configure"},
{"get", NULL,
cmd_get_status,
"Get ON/OFF status"},
- {"onoff", "<0/1>", cmd_set,
+ {"onoff", "<0/1> [unack]", cmd_set,
"Send \"SET ON/OFF\"
command"},
{} },
};

2.19.2.windows.1