Skip to contentSkip to conversation

ALSA: compress: allow pause and resume during draining

PATCH Superseded Gyeongtaek Lee 3 participants 6 messages Oct 27, 2020 – Nov 25, 2020 1 message not in the archive

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): CGME20201027015726epcas2p1af97e3b6d4a54948a0e29fced35a1cd6@epcas2p1.samsung.com

#1 lore raw

PATCH v2 1/1 ALSA: compress: allow pause and resume during draining

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

---
 include/sound/compress_driver.h | 17 +++++++++++++
 sound/core/compress_offload.c   | 44 +++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 8 deletions(-)
include/sound/compress_driver.h +17 -0
index 70cbc5095e72..5a0d6737de5e 100644
@@ -67,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @partial_drain: undergoing partial_drain for stream, true when set
+ * @pause_in_draining: paused during draining state, true when set
  * @private_data: pointer to DSP private data
  * @dma_buffer: allocated buffer if any
  */
@@ -80,6 +81,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	bool partial_drain;
+	bool pause_in_draining;
 	void *private_data;
 	struct snd_dma_buffer dma_buffer;
 };
@@ -142,6 +144,7 @@ struct snd_compr_ops {
  * @direction: Playback or capture direction
  * @lock: device lock
  * @device: device id
+ * @use_pause_in_draining: allow pause in draining, true when set
  */
 struct snd_compr {
 	const char *name;
@@ -152,6 +155,7 @@ struct snd_compr {
 	unsigned int direction;
 	struct mutex lock;
 	int device;
+	bool use_pause_in_draining;
 #ifdef CONFIG_SND_VERBOSE_PROCFS
 	/* private: */
 	char id[64];
@@ -166,6 +170,19 @@ int snd_compress_deregister(struct snd_compr *device);
 int snd_compress_new(struct snd_card *card, int device,
 			int type, const char *id, struct snd_compr *compr);
 
+/**
+ * snd_compr_use_pause_in_draining - Allow pause and resume in draining state
+ * @substream: compress substream to set
+ *
+ * Allow pause and resume in draining state.
+ * Only HW driver supports this transition can call this API.
+ */
+static inline void snd_compr_use_pause_in_draining(
+					struct snd_compr_stream *substream)
+{
+	substream->device->use_pause_in_draining = true;
+}
+
 /* dsp driver callback apis
  * For playback: driver should call snd_compress_fragment_elapsed() to let the
  * framework know that a fragment has been consumed from the ring buffer
sound/core/compress_offload.c +36 -8

64 lines not on this page · raw message

Signature · 1 line
2.21.0
#2 lore raw
Quoted 14 lines · Gyeongtaek Lee

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

Quoted 2 lines

I personally find the approach is fine, but let's see what others think.

One remaining concern to me is about the setup of use_pause_in_draining flag. This is done by an explicit function call after the snd_compr object initialization. It's a bit uncommon style, but OTOH I understand it from the current initialization code of compress-offload API.

thanks,

Takashi

Quoted 136 lines
---
 include/sound/compress_driver.h | 17 +++++++++++++
 sound/core/compress_offload.c   | 44 +++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 8 deletions(-)
include/sound/compress_driver.h +17 -0
index 70cbc5095e72..5a0d6737de5e 100644
@@ -67,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @partial_drain: undergoing partial_drain for stream, true when set
+ * @pause_in_draining: paused during draining state, true when set
  * @private_data: pointer to DSP private data
  * @dma_buffer: allocated buffer if any
  */
@@ -80,6 +81,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	bool partial_drain;
+	bool pause_in_draining;
 	void *private_data;
 	struct snd_dma_buffer dma_buffer;
 };
@@ -142,6 +144,7 @@ struct snd_compr_ops {
  * @direction: Playback or capture direction
  * @lock: device lock
  * @device: device id
+ * @use_pause_in_draining: allow pause in draining, true when set
  */
 struct snd_compr {
 	const char *name;
@@ -152,6 +155,7 @@ struct snd_compr {
 	unsigned int direction;
 	struct mutex lock;
 	int device;
+	bool use_pause_in_draining;
 #ifdef CONFIG_SND_VERBOSE_PROCFS
 	/* private: */
 	char id[64];
@@ -166,6 +170,19 @@ int snd_compress_deregister(struct snd_compr *device);
 int snd_compress_new(struct snd_card *card, int device,
 			int type, const char *id, struct snd_compr *compr);
 
+/**
+ * snd_compr_use_pause_in_draining - Allow pause and resume in draining state
+ * @substream: compress substream to set
+ *
+ * Allow pause and resume in draining state.
+ * Only HW driver supports this transition can call this API.
+ */
+static inline void snd_compr_use_pause_in_draining(
+					struct snd_compr_stream *substream)
+{
+	substream->device->use_pause_in_draining = true;
+}
+
 /* dsp driver callback apis
  * For playback: driver should call snd_compress_fragment_elapsed() to let the
  * framework know that a fragment has been consumed from the ring buffer
sound/core/compress_offload.c +36 -8
index 0e53f6f31916..a071485383ed 100644
@@ -708,11 +708,24 @@ static int snd_compr_pause(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_RUNNING:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->pause_in_draining = true;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+	}
 	return retval;
 }
 
@@ -720,11 +733,25 @@ static int snd_compr_resume(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_PAUSED)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_PAUSED:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining ||
+		    !stream->pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->pause_in_draining = false;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+	}
 	return retval;
 }
 
@@ -767,6 +794,7 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
 		/* clear flags and stop any drain wait */
 		stream->partial_drain = false;
 		stream->metadata_set = false;
+		stream->pause_in_draining = false;
 		snd_compr_drain_notify(stream);
 		stream->runtime->total_bytes_available = 0;
 		stream->runtime->total_bytes_transferred = 0;
Signature · 1 line
2.21.0
#3 lore raw
Quoted 19 lines · Takashi Iwai
Quoted 14 lines · Gyeongtaek Lee

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

Quoted 2 lines
Quoted 8 lines

I personally find the approach is fine, but let's see what others think.

One remaining concern to me is about the setup of use_pause_in_draining flag. This is done by an explicit function call after the snd_compr object initialization. It's a bit uncommon style, but OTOH I understand it from the current initialization code of compress-offload API.

Thanks for your kind review.

It's been almost 2 weeks.
So, I think that there is no further comment for this patch. Could this patch be applied?
If so, should I resend this patch with new header like patch v3 or wait?

thanks again,

Gyeongtaek

Quoted 143 lines

thanks,

Takashi

Quoted 136 lines
---
 include/sound/compress_driver.h | 17 +++++++++++++
 sound/core/compress_offload.c   | 44 +++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 8 deletions(-)
include/sound/compress_driver.h +17 -0
index 70cbc5095e72..5a0d6737de5e 100644
@@ -67,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @partial_drain: undergoing partial_drain for stream, true when set
+ * @pause_in_draining: paused during draining state, true when set
  * @private_data: pointer to DSP private data
  * @dma_buffer: allocated buffer if any
  */
@@ -80,6 +81,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	bool partial_drain;
+	bool pause_in_draining;
 	void *private_data;
 	struct snd_dma_buffer dma_buffer;
 };
@@ -142,6 +144,7 @@ struct snd_compr_ops {
  * @direction: Playback or capture direction
  * @lock: device lock
  * @device: device id
+ * @use_pause_in_draining: allow pause in draining, true when set
  */
 struct snd_compr {
 	const char *name;
@@ -152,6 +155,7 @@ struct snd_compr {
 	unsigned int direction;
 	struct mutex lock;
 	int device;
+	bool use_pause_in_draining;
 #ifdef CONFIG_SND_VERBOSE_PROCFS
 	/* private: */
 	char id[64];
@@ -166,6 +170,19 @@ int snd_compress_deregister(struct snd_compr *device);
 int snd_compress_new(struct snd_card *card, int device,
 			int type, const char *id, struct snd_compr *compr);
 
+/**
+ * snd_compr_use_pause_in_draining - Allow pause and resume in draining state
+ * @substream: compress substream to set
+ *
+ * Allow pause and resume in draining state.
+ * Only HW driver supports this transition can call this API.
+ */
+static inline void snd_compr_use_pause_in_draining(
+					struct snd_compr_stream *substream)
+{
+	substream->device->use_pause_in_draining = true;
+}
+
 /* dsp driver callback apis
  * For playback: driver should call snd_compress_fragment_elapsed() to let the
  * framework know that a fragment has been consumed from the ring buffer
sound/core/compress_offload.c +36 -8
index 0e53f6f31916..a071485383ed 100644
@@ -708,11 +708,24 @@ static int snd_compr_pause(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_RUNNING:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->pause_in_draining = true;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+	}
 	return retval;
 }
 
@@ -720,11 +733,25 @@ static int snd_compr_resume(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_PAUSED)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_PAUSED:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining ||
+		    !stream->pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->pause_in_draining = false;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+	}
 	return retval;
 }
 
@@ -767,6 +794,7 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
 		/* clear flags and stop any drain wait */
 		stream->partial_drain = false;
 		stream->metadata_set = false;
+		stream->pause_in_draining = false;
 		snd_compr_drain_notify(stream);
 		stream->runtime->total_bytes_available = 0;
 		stream->runtime->total_bytes_transferred = 0;
Signature · 1 line
2.21.0
#4 lore raw
Quoted 29 lines · Gyeongtaek Lee
Quoted 19 lines · Takashi Iwai
Quoted 14 lines · Gyeongtaek Lee

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

Quoted 2 lines
Quoted 8 lines

I personally find the approach is fine, but let's see what others think.

One remaining concern to me is about the setup of use_pause_in_draining flag. This is done by an explicit function call after the snd_compr object initialization. It's a bit uncommon style, but OTOH I understand it from the current initialization code of compress-offload API.

Quoted 4 lines

Thanks for your kind review.

It's been almost 2 weeks.
So, I think that there is no further comment for this patch.

I guess it's just overlooked. Vinod?

Takashi

Quoted 150 lines

Could this patch be applied?
If so, should I resend this patch with new header like patch v3 or wait?

thanks again,

Gyeongtaek

Quoted 143 lines

thanks,

Takashi

Quoted 136 lines
---
 include/sound/compress_driver.h | 17 +++++++++++++
 sound/core/compress_offload.c   | 44 +++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 8 deletions(-)
include/sound/compress_driver.h +17 -0
index 70cbc5095e72..5a0d6737de5e 100644
@@ -67,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @partial_drain: undergoing partial_drain for stream, true when set
+ * @pause_in_draining: paused during draining state, true when set
  * @private_data: pointer to DSP private data
  * @dma_buffer: allocated buffer if any
  */
@@ -80,6 +81,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	bool partial_drain;
+	bool pause_in_draining;
 	void *private_data;
 	struct snd_dma_buffer dma_buffer;
 };
@@ -142,6 +144,7 @@ struct snd_compr_ops {
  * @direction: Playback or capture direction
  * @lock: device lock
  * @device: device id
+ * @use_pause_in_draining: allow pause in draining, true when set
  */
 struct snd_compr {
 	const char *name;
@@ -152,6 +155,7 @@ struct snd_compr {
 	unsigned int direction;
 	struct mutex lock;
 	int device;
+	bool use_pause_in_draining;
 #ifdef CONFIG_SND_VERBOSE_PROCFS
 	/* private: */
 	char id[64];
@@ -166,6 +170,19 @@ int snd_compress_deregister(struct snd_compr *device);
 int snd_compress_new(struct snd_card *card, int device,
 			int type, const char *id, struct snd_compr *compr);
 
+/**
+ * snd_compr_use_pause_in_draining - Allow pause and resume in draining state
+ * @substream: compress substream to set
+ *
+ * Allow pause and resume in draining state.
+ * Only HW driver supports this transition can call this API.
+ */
+static inline void snd_compr_use_pause_in_draining(
+					struct snd_compr_stream *substream)
+{
+	substream->device->use_pause_in_draining = true;
+}
+
 /* dsp driver callback apis
  * For playback: driver should call snd_compress_fragment_elapsed() to let the
  * framework know that a fragment has been consumed from the ring buffer
sound/core/compress_offload.c +36 -8
index 0e53f6f31916..a071485383ed 100644
@@ -708,11 +708,24 @@ static int snd_compr_pause(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_RUNNING:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->pause_in_draining = true;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+	}
 	return retval;
 }
 
@@ -720,11 +733,25 @@ static int snd_compr_resume(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_PAUSED)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_PAUSED:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining ||
+		    !stream->pause_in_draining)
+			return -EPERM;
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->pause_in_draining = false;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+	}
 	return retval;
 }
 
@@ -767,6 +794,7 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
 		/* clear flags and stop any drain wait */
 		stream->partial_drain = false;
 		stream->metadata_set = false;
+		stream->pause_in_draining = false;
 		snd_compr_drain_notify(stream);
 		stream->runtime->total_bytes_available = 0;
 		stream->runtime->total_bytes_transferred = 0;
Signature · 1 line
2.21.0
maintainer
#5 lore raw
Quoted 31 lines · Takashi Iwai
Quoted 29 lines · Gyeongtaek Lee
Quoted 27 lines · Takashi Iwai
Quoted 14 lines · Gyeongtaek Lee

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

Quoted 2 lines

I personally find the approach is fine, but let's see what others think.

One remaining concern to me is about the setup of use_pause_in_draining flag. This is done by an explicit function call after the snd_compr object initialization. It's a bit uncommon style, but OTOH I understand it from the current initialization code of compress-offload API.

Quoted 6 lines
Quoted 4 lines

Thanks for your kind review.

It's been almost 2 weeks.
So, I think that there is no further comment for this patch.

I guess it's just overlooked. Vinod?

Sorry indeed this seems to have slipped, this mostly looks okay to me (saw some code style nits will reply on those)

I have todo in my list to fix use of PCM_STATE in compress, i will send that later

Signature · 1 line
~Vinod
maintainer
#6 lore raw
In reply to Gyeongtaek Lee
Quoted 81 lines · Gyeongtaek Lee

With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be enhanced.
To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining().

---
 include/sound/compress_driver.h | 17 +++++++++++++
 sound/core/compress_offload.c   | 44 +++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 8 deletions(-)
include/sound/compress_driver.h +17 -0
index 70cbc5095e72..5a0d6737de5e 100644
@@ -67,6 +67,7 @@ struct snd_compr_runtime {
  * @metadata_set: metadata set flag, true when set
  * @next_track: has userspace signal next track transition, true when set
  * @partial_drain: undergoing partial_drain for stream, true when set
+ * @pause_in_draining: paused during draining state, true when set
  * @private_data: pointer to DSP private data
  * @dma_buffer: allocated buffer if any
  */
@@ -80,6 +81,7 @@ struct snd_compr_stream {
 	bool metadata_set;
 	bool next_track;
 	bool partial_drain;
+	bool pause_in_draining;
 	void *private_data;
 	struct snd_dma_buffer dma_buffer;
 };
@@ -142,6 +144,7 @@ struct snd_compr_ops {
  * @direction: Playback or capture direction
  * @lock: device lock
  * @device: device id
+ * @use_pause_in_draining: allow pause in draining, true when set
  */
 struct snd_compr {
 	const char *name;
@@ -152,6 +155,7 @@ struct snd_compr {
 	unsigned int direction;
 	struct mutex lock;
 	int device;
+	bool use_pause_in_draining;
 #ifdef CONFIG_SND_VERBOSE_PROCFS
 	/* private: */
 	char id[64];
@@ -166,6 +170,19 @@ int snd_compress_deregister(struct snd_compr *device);
 int snd_compress_new(struct snd_card *card, int device,
 			int type, const char *id, struct snd_compr *compr);
 
+/**
+ * snd_compr_use_pause_in_draining - Allow pause and resume in draining state
+ * @substream: compress substream to set
+ *
+ * Allow pause and resume in draining state.
+ * Only HW driver supports this transition can call this API.
+ */
+static inline void snd_compr_use_pause_in_draining(
+					struct snd_compr_stream *substream)
+{
+	substream->device->use_pause_in_draining = true;
+}
+
 /* dsp driver callback apis
  * For playback: driver should call snd_compress_fragment_elapsed() to let the
  * framework know that a fragment has been consumed from the ring buffer
sound/core/compress_offload.c +0 -0
index 0e53f6f31916..a071485383ed 100644

sound/core/compress_offload.c static int snd_compr_pause(struct snd_compr_stream *stream) · line 714

Quoted 8 lines
sound/core/compress_offload.c +4 -1
@@ -708,11 +708,24 @@ static int snd_compr_pause(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_RUNNING:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);

this seems to fit single line with new 100char limit and makes it a better read, can we please do that here and few places below .. The line split is making it look bit ugly IMO

sound/core/compress_offload.c static int snd_compr_pause(struct snd_compr_stream *stream) · line 720

Quoted 6 lines
sound/core/compress_offload.c +6 -0
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining)
+			return -EPERM;

I am expecting patches to tinycompress to handle pause while drain. Esp this case..

Quoted 20 lines
sound/core/compress_offload.c +8 -4
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_PUSH);
+		if (!retval)
+			stream->pause_in_draining = true;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
+	}
 	return retval;
 }
 
@@ -720,11 +733,25 @@ static int snd_compr_resume(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_PAUSED)
+	switch (stream->runtime->state) {

sound/core/compress_offload.c static int snd_compr_resume(struct snd_compr_stream *stream) · line 746

Quoted 10 lines
sound/core/compress_offload.c +10 -0
+	case SNDRV_PCM_STATE_PAUSED:
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+		break;
+	case SNDRV_PCM_STATE_DRAINING:
+		if (!stream->device->use_pause_in_draining ||
+		    !stream->pause_in_draining)
+			return -EPERM;

does this condition make sense for resume part..? We have already checked for this while going into pause. I am not expecting drain state to change while we are paused :)

Quoted 25 lines
sound/core/compress_offload.c +8 -3
+		retval = stream->ops->trigger(stream,
+			SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
+		if (!retval)
+			stream->pause_in_draining = false;
+		break;
+	default:
 		return -EPERM;
-	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
-	if (!retval)
-		stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
+	}
 	return retval;
 }
 
@@ -767,6 +794,7 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
 		/* clear flags and stop any drain wait */
 		stream->partial_drain = false;
 		stream->metadata_set = false;
+		stream->pause_in_draining = false;
 		snd_compr_drain_notify(stream);
 		stream->runtime->total_bytes_available = 0;
 		stream->runtime->total_bytes_transferred = 0;
Signature · 1 line
2.21.0
Signature · 1 line
~Vinod