Skip to contentSkip to conversation

docs/designs: re-work the xenstore migration document...

PATCH Superseded Paul Durrant 4 participants 11 messages Apr 24, 2020 – Apr 27, 2020

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 docs/designs: re-work the xenstore migration document...

From: Paul Durrant <[email protected]>

... to specify a separate migration stream that will also be suitable for live update.

The original scope of the document was to support non-cooperative migration of guests [1] but, since then, live update of xenstored has been brought into scope. Thus it makes more sense to define a separate image format for serializing xenstore state that is suitable for both purposes.

The document has been limited to specifying a new image format. The mechanism for acquiring the image for live update or migration is not covered as that is more appropriately dealt with by a patch to docs/misc/xenstore.txt. It is also expected that, when the first implementation of live update or migration making use of this specification is committed, that the document is moved from docs/designs into docs/specs.

[1] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/designs/non-cooperative-migration.md

---
Juergen Gross <[email protected]>
Andrew Cooper <[email protected]>
George Dunlap <[email protected]>
Ian Jackson <[email protected]>
Jan Beulich <[email protected]>
Julien Grall <[email protected]>
Stefano Stabellini <[email protected]>
Wei Liu <[email protected]>

---
 docs/designs/xenstore-migration.md | 472 +++++++++++++++++++----------
 1 file changed, 309 insertions(+), 163 deletions(-)
docs/designs/xenstore-migration.md +309 -163
index 6ab351e8fe..c96bad48eb 100644
@@ -3,254 +3,400 @@
 ## Background
 
 The design for *Non-Cooperative Migration of Guests*[1] explains that extra
-save records are required in the migrations stream to allow a guest running
-PV drivers to be migrated without its co-operation. Moreover the save
-records must include details of registered xenstore watches as well as
-content; information that cannot currently be recovered from `xenstored`,
-and hence some extension to the xenstore protocol[2] will also be required.
-
-The *libxenlight Domain Image Format* specification[3] already defines a
-record type `EMULATOR_XENSTORE_DATA` but this is not suitable for
-transferring xenstore data pertaining to the domain directly as it is
-specified such that keys are relative to the path
-`/local/domain/$dm_domid/device-model/$domid`. Thus it is necessary to
-define at least one new save record type.
+save records are required in the migrations stream to allow a guest running PV
+drivers to be migrated without its co-operation. Moreover the save records must
+include details of registered xenstore watches as well ascontent; information
+that cannot currently be recovered from `xenstored`, and hence some extension
+to the xenstored implementations will also be required.
+
+As a similar set of data is needed for transferring xenstore data from one
+instance to another when live updating xenstored this document proposes an
+image format for a 'migration stream' suitable for both purposes.
 
 ## Proposal
 
-### New Save Record
+The image format consists of a _header_ followed by 1 or more _records_. Each
+record consists of a type and length field, followed by any data mandated by
+the record type. At minimum there will be a single record of type `END`
+(defined below).
 
-A new mandatory record type should be defined within the libxenlight Domain
-Image Format:
+### Header
 
-`0x00000007: DOMAIN_XENSTORE_DATA`
+The header identifies the stream as a `xenstore` stream, including the version
+of the specification that it complies with.
 
-An arbitrary number of these records may be present in the migration
-stream and may appear in any order. The format of each record should be as
-follows:
+All fields in this header must be in _big-endian_ byte order, regardless of
+the setting of the endianness bit.
 
 
 ```
     0       1       2       3       4       5       6       7    octet
 +-------+-------+-------+-------+-------+-------+-------+-------+
-| type                          | record specific data          |
-+-------------------------------+                               |
-...
-+---------------------------------------------------------------+
+| ident                                                         |
++-------------------------------+-------------------------------|
+| version                       | flags                         |
++-------------------------------+-------------------------------+
 ```
 
-where type is one of the following values
 
+| Field     | Description                                       |
+|-----------|---------------------------------------------------|
+| `ident`   | 0x78656e73746f7265 ('xenstore' in ASCII)          |
+|           |                                                   |
+| `version` | 0x00000001 (the version of the specification)     |
+|           |                                                   |
+| `flags`   | 0 (LSB): Endianness: 0 = little, 1 = big          |
+|           |                                                   |
+|           | 1-31: Reserved (must be zero)                     |
 
-| Field  | Description                                      |
-|--------|--------------------------------------------------|
-| `type` | 0x00000000: invalid                              |
-|        | 0x00000001: NODE_DATA                            |
-|        | 0x00000002: WATCH_DATA                           |
-|        | 0x00000003: TRANSACTION_DATA                     |
-|        | 0x00000004 - 0xFFFFFFFF: reserved for future use |
+### Records
 
+Records immediately follow the header and have the following format:
 
-and data is one of the record data formats described in the following
-sections.
 
+```
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |
++-------+-------------------------------------------------------+
+```
+
+NOTE: padding octets here and in all subsequent format specifications must be
+      zero, unless stated otherwise.
 
-NOTE: The record data does not contain an overall length because the
-libxenlight record header specifies the length.
 
+| Field  | Description                                          |
+|--------|------------------------------------------------------|
+| `type` | 0x00000000: END                                      |
+|        | 0x00000001: GLOBAL_DATA                              |
+|        | 0x00000002: CONNECTION_DATA                          |
+|        | 0x00000003: WATCH_DATA                               |
+|        | 0x00000004: TRANSACTION_DATA                         |
+|        | 0x00000005: NODE_DATA                                |
+|        | 0x00000006 - 0xFFFFFFFF: reserved for future use     |
+|        |                                                      |
+| `len`  | The length (in octets) of `body`                     |
+|        |                                                      |
+| `body` | The type-specific record data                        |
 
-**NODE_DATA**
+The various formats of the type-specific data are described in the following
+sections:
 
+\pagebreak
 
-Each NODE_DATA record specifies a single node in xenstore and is formatted
-as follows:
+### END
 
+The end record marks the end of the image, and is the final record
+in the stream.
 
 ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| NODE_DATA                     |
-+-------------------------------+
-| path length                   |
-+-------------------------------+
-| path data                     |
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
-| perm count (N)                |
-+-------------------------------+
-| perm0                         |
-+-------------------------------+
-...
-+-------------------------------+
-| permN                         |
-+-------------------------------+
-| value length                  |
-+-------------------------------+
-| value data                    |
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
 ```
 
-where perm0..N are formatted as follows:
 
+The end record contains no fields; its body length is 0.
+
+\pagebreak
+
+### GLOBAL_DATA
+
+This record is only relevant for live update. It contains details of global
+xenstored state that needs to be restored.
 
 ```
-    0       1       2       3     octet
+    0       1       2       3    octet
 +-------+-------+-------+-------+
-| perm  | pad   | domid         |
+| rw-socket-fd                  |
++-------------------------------+
+| ro-socket-fd                  |
 +-------------------------------+
 ```
 
 
-path length and value length are specified in octets (excluding the NUL
-terminator of the path). perm should be one of the ASCII values `w`, `r`,
-`b` or `n` as described in [2]. All pad values should be 0.
-All paths should be absolute (i.e. start with `/`) and as described in
-[2].
+| Field          | Description                                  |
+|----------------|----------------------------------------------|
+| `rw-socket-fd` | The file descriptor of the socket accepting  |
+|                | read-write connections                       |
+|                |                                              |
+| `ro-socket-fd` | The file descriptor of the socket accepting  |
+|                | read-only connections                        |
+
+xenstored will resume in the original process context. Hence `rw-socket-fd` and
+`ro-socket-fd` simply specify the file descriptors of the sockets.
 
 
-**WATCH_DATA**
+\pagebreak
 
+### CONNECTION_DATA
 
-Each WATCH_DATA record specifies a registered watch and is formatted as
-follows:
+For live update the image format will contain a `CONNECTION_DATA` record for
+each connection to xenstore. For migration it will only contain a record for
+the domain being migrated.
 
 
 ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| WATCH_DATA                    |
-+-------------------------------+
-| wpath length                  |
-+-------------------------------+
-| wpath data                    |
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| conn-id                       | pad                           |
++---------------+-----------------------------------------------+
+| conn-type     | conn-spec
 ...
++-------------------------------+-------------------------------+
+| data-len                      | data
 +-------------------------------+
-| token length                  |
-+-------------------------------+
-| token data                    |
 ...
-| pad (0 to 3 octets)           |
-+-------------------------------+
 ```
 
-wpath length and token length are specified in octets (excluding the NUL
-terminator). The wpath should be as described for the `WATCH` operation in
-[2]. The token is an arbitrary string of octets not containing any NUL
-values.
 
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `conn-id`   | A non-zero number used to identify this         |
+|             | connection in subsequent connection-specific    |
+|             | records                                         |
+|             |                                                 |
+| `conn-type` | 0x0000: shared ring                             |
+|             | 0x0001: socket                                  |
+|             |                                                 |
+| `conn-spec` | See below                                       |
+|             |                                                 |
+| `data-len`  | The length (in octets) of any pending data not  |
+|             | yet written to the connection                   |
+|             |                                                 |
+| `data`      | Pending data (may be empty)                     |
 
-**TRANSACTION_DATA**
+The format of `conn-spec` is dependent upon `conn-type`.
 
+\pagebreak
 
-Each TRANSACTION_DATA record specifies an open transaction and is formatted
-as follows:
+For `shared ring` connections it is as follows:
 
 
 ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| TRANSACTION_DATA              |
-+-------------------------------+
-| tx_id                         |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
+                +-------+-------+-------+-------+-------+-------+
+                | domid         | tdomid        | flags         |
++---------------+---------------+---------------+---------------+
+| revtchn                       | levtchn                       |
++-------------------------------+-------------------------------+
+| mfn                                                           |
++---------------------------------------------------------------+
 ```
 
-where tx_id is the non-zero identifier values of an open transaction.
-
 
-### Protocol Extension
+| Field      | Description                                      |
+|------------|--------------------------------------------------|
+| `domid`    | The domain-id that owns the shared page          |
+|            |                                                  |
+| `tdomid`   | The domain-id that `domid` acts on behalf of if  |
+|            | it has been subject to an SET_TARGET             |
+|            | operation [2] or DOMID_INVALID otherwise         |
+|            |                                                  |
+| `flags`    | A bit-wise OR of:                                |
+|            | 0x0001: INTRODUCE has been issued                |
+|            | 0x0002: RELEASE has been issued                  |
+|            |                                                  |
+| `revtchn`  | The port number of the interdomain channel used  |
+|            | by `domid` to communicate with xenstored         |
+|            |                                                  |
+| `levtchn`  | For a live update this will be the port number   |
+|            | of the interdomain channel used by xenstored     |
+|            | itself otherwise, for migration, it will be -1   |
+|            |                                                  |
+| `mfn`      | The MFN of the shared page for a live update or  |
+|            | INVALID_MFN otherwise                            |
+
+Since the ABI guarantees that entry 1 in `domid`'s grant table will always
+contain the GFN of the shared page, so for a live update `mfn` can be used to
+give confidence that `domid` has not been re-cycled during the update.
+
+
+For `socket` connections it is as follows:
 
-Before xenstore state is migrated it is necessary to wait for any pending
-reads, writes, watch registrations etc. to complete, and also to make sure
-that xenstored does not start processing any new requests (so that new
-requests remain pending on the shared ring for subsequent processing on the
-new host). Hence the following operation is needed:
 
 ```
-QUIESCE                 <domid>|
-
-Complete processing of any request issued by the specified domain, and
-do not process any further requests from the shared ring.
+    0       1       2       3       4       5       6       7    octet
+                +-------+-------+-------+-------+-------+-------+
+                | flags         | socket-fd                     |
+                +---------------+-------------------------------+
 ```
 
-The `WATCH` operation does not allow specification of a `<domid>`; it is
-assumed that the watch pertains to the domain that owns the shared ring
-over which the operation is passed. Hence, for the tool-stack to be able
-to register a watch on behalf of a domain a new operation is needed:
 
-```
-ADD_DOMAIN_WATCHES      <domid>|<watch>|+
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `flags`     | A bit-wise OR of:                               |
+|             | 0001: read-only                                 |
+|             |                                                 |
+| `socket-fd` | The file descriptor of the connected socket     |
 
-Adds watches on behalf of the specified domain.
+This type of connection is only relevant for live update, where the xenstored
+resumes in the original process context. Hence `socket-fd` simply specify
+the file descriptor of the socket connection.
 
-<watch> is a NUL separated tuple of <path>|<token>. The semantics of this
-operation are identical to the domain issuing WATCH <path>|<token>| for
-each <watch>.
-```
+\pagebreak
+
+### WATCH_DATA
+
+The image format will contain a `WATCH_DATA` record for each watch registered
+by a connection for which there is `CONNECTION_DATA` record previously present.
 
-The watch information for a domain also needs to be extracted from the
-sending xenstored so the following operation is also needed:
 
 ```
-GET_DOMAIN_WATCHES      <domid>|<index>   <gencnt>|<watch>|*
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++---------------+---------------+
+| wpath-len     | token-len     |
++---------------+---------------+
+| wpath
+...
+| token
+...
+```
+
 
-Gets the list of watches that are currently registered for the domain.
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `conn-id`   | The connection that issued the `WATCH`          |
+|             | operation [2]                                   |
+|             |                                                 |
+| `wpath-len` | The length (in octets) of `wpath` including the |
+|             | NUL terminator                                  |
+|             |                                                 |
+| `token-len` | The length (in octets) of `token` including the |
+|             | NUL terminator                                  |
+|             |                                                 |
+| `wpath`     | The watch path, as specified in the `WATCH`     |
+|             | operation                                       |
+|             |                                                 |
+| `token`     | The watch identifier token, as specified in the |
+|             | `WATCH` operation                               |
+
+\pagebreak
+
+### TRANSACTION_DATA
+
+The image format will contain a `TRANSACTION_DATA` record for each transaction
+that is pending on a connection for which there is `CONNECTION_DATA` record
+previously present.
 
-<watch> is a NUL separated tuple of <path>|<token>. The sub-list returned
-will start at <index> items into the the overall list of watches and may
-be truncated (at a <watch> boundary) such that the returned data fits
-within XENSTORE_PAYLOAD_MAX.
 
-If <index> is beyond the end of the overall list then the returned sub-
-list will be empty. If the value of <gencnt> changes then it indicates
-that the overall watch list has changed and thus it may be necessary
-to re-issue the operation for previous values of <index>.
 ```
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++-------------------------------+
+| tx-id                         |
++-------------------------------+
+```
+
+
+| Field          | Description                                  |
+|----------------|----------------------------------------------|
+| `conn-id`      | The connection that issued the               |
+|                | `TRANSACTION_START` operation [2]            |
+|                |                                              |
+| `tx-id`        | The transaction id passed back to the domain |
+|                | by the `TRANSACTION_START` operation         |
+
+\pagebreak
 
-To deal with transactions that were pending when the domain is migrated
-it is necessary to start transactions with the same tx_id on behalf of the
-domain in the receiving xenstored.
+### NODE_DATA
 
-NOTE: For safety each such transaction should result in an `EAGAIN` when
-the `TRANSACTION_END` operation is performed, as modifications made under
-the tx_id will not be part of the migration stream.
+For live update the image format will contain a `NODE_DATA` record for each
+node in xenstore. For migration it will only contain a record for the nodes
+relating to the domain being migrated. The `NODE_DATA` may be related to
+a _committed_ node (globally visible in xenstored) or a _pending_ node (created
+or modified by a transaction for which there is also a `TRANSACTION_DATA`
+record previously present).
 
-The `TRANSACTION_START` operation does not allow specification of a
-`<domid>`; it is assumed that the transaction pertains to the domain that
-owns the shared ring over which the operation is passed. Neither does it
-allow a `<transid>` to be specified; it is always chosen by xenstored.
-Hence, for the tool-stack to be able to open a transaction on behalf of a
-domain a new operation is needed:
 
 ```
-START_DOMAIN_TRANSACTION    <domid>|<transid>|
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++-------------------------------+
+| tx-id                         |
++---------------+---------------+
+| access        | perm-count    |
++---------------+---------------+
+| perm1                         |
++-------------------------------+
+...
++-------------------------------+
+| permN                         |
++---------------+---------------+
+| path-len      | value-len     |
++---------------+---------------+
+| path
+...
+| value
+...
+```
+
+
+| Field        | Description                                    |
+|--------------|------------------------------------------------|
+| `conn-id`    | If this value is non-zero then this record     |
+|              | related to a pending transaction               |
+|              |                                                |
+| `tx-id`      | This value should be ignored if `conn-id` is   |
+|              | zero. Otherwise it specifies the id of the     |
+|              | pending transaction                            |
+|              |                                                |
+| `access`     | This value should be ignored if this record    |
+|              | does not relate to a pending transaction,      |
+|              | otherwise it specifies the accesses made to    |
+|              | the node and hence is a bitwise OR of:         |
+|              |                                                |
+|              | 0x0001: read                                   |
+|              | 0x0002: written                                |
+|              |                                                |
+|              | The value will be zero for a deleted node      |
+|              |                                                |
+| `perm-count` | The number (N) of node permission specifiers   |
+|              | (which will be 0 for a node deleted in a       |
+|              | pending transaction)                           |
+|              |                                                |
+| `perm1..N`   | A list of zero or more node permission         |
+|              | specifiers (see below)                         |
+|              |                                                |
+| `path-len`   | The length (in octets) of `path` including the |
+|              | NUL terminator                                 |
+|              |                                                |
+| `value-len`  | The length (in octets) of `value` (which will  |
+|              | be zero for a deleted node)                    |
+|              |                                                |
+| `path`       | The absolute path of the node                  |
+|              |                                                |
+| `value`      | The node value (which may be empty or contain  |
+|              | NUL octets)                                    |
+
+
+A node permission specifier has the following format:
 
-Starts a transaction on behalf of a domain.
 
-The semantics of this are similar to the domain issuing
-TRANSACTION_START and receiving the specified <transid> as the response.
-The main difference is that the transaction will be immediately marked as
-'conflicting' such that when the domain issues TRANSACTION_END T|, it will
-result in EAGAIN.
+```
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| perm  | pad   | domid         |
++-------+-------+---------------+
 ```
 
-It may also be desirable to state in the protocol specification that
-the `INTRODUCE` operation should not clear the `<gfn>` specified such that
-a `RELEASE` operation followed by an `INTRODUCE` operation form an
-idempotent pair. The current implementation of *C xentored* does this
-(in the `domain_conn_reset()` function) but this could be dropped as this
-behaviour is not currently specified and the page will always be zeroed
-for a newly created domain.
+| Field   | Description                                         |
+|---------|-----------------------------------------------------|
+| `perm`  | One of the ASCII values `w`, `r`, `b` or `n` as     |
+|         | specified for the `SET_PERMS` operation [2]         |
+|         |                                                     |
+| `domid` | The domain-id to which the permission relates       |
 
 
 * * *
 
 [1] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/designs/non-cooperative-migration.md
+
 [2] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/xenstore.txt
-[3] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/specs/libxl-migration-stream.pandoc
Signature · 1 line
2.17.1
#1 lore raw
Quoted 128 lines · Paul Durrant

From: Paul Durrant <[email protected]>

... to specify a separate migration stream that will also be suitable for live update.

The original scope of the document was to support non-cooperative migration of guests [1] but, since then, live update of xenstored has been brought into scope. Thus it makes more sense to define a separate image format for serializing xenstore state that is suitable for both purposes.

The document has been limited to specifying a new image format. The mechanism for acquiring the image for live update or migration is not covered as that is more appropriately dealt with by a patch to docs/misc/xenstore.txt. It is also expected that, when the first implementation of live update or migration making use of this specification is committed, that the document is moved from docs/designs into docs/specs.

[1] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/designs/non-cooperative-migration.md

---
Juergen Gross <[email protected]>
Andrew Cooper <[email protected]>
George Dunlap <[email protected]>
Ian Jackson <[email protected]>
Jan Beulich <[email protected]>
Julien Grall <[email protected]>
Stefano Stabellini <[email protected]>
Wei Liu <[email protected]>

---
  docs/designs/xenstore-migration.md | 472 +++++++++++++++++++----------
  1 file changed, 309 insertions(+), 163 deletions(-)
docs/designs/xenstore-migration.md +36 -33
index 6ab351e8fe..c96bad48eb 100644
@@ -3,254 +3,400 @@
  ## Background
 
  The design for *Non-Cooperative Migration of Guests*[1] explains that extra
-save records are required in the migrations stream to allow a guest running
-PV drivers to be migrated without its co-operation. Moreover the save
-records must include details of registered xenstore watches as well as
-content; information that cannot currently be recovered from `xenstored`,
-and hence some extension to the xenstore protocol[2] will also be required.
-
-The *libxenlight Domain Image Format* specification[3] already defines a
-record type `EMULATOR_XENSTORE_DATA` but this is not suitable for
-transferring xenstore data pertaining to the domain directly as it is
-specified such that keys are relative to the path
-`/local/domain/$dm_domid/device-model/$domid`. Thus it is necessary to
-define at least one new save record type.
+save records are required in the migrations stream to allow a guest running PV
+drivers to be migrated without its co-operation. Moreover the save records must
+include details of registered xenstore watches as well ascontent; information
+that cannot currently be recovered from `xenstored`, and hence some extension
+to the xenstored implementations will also be required.
+
+As a similar set of data is needed for transferring xenstore data from one
+instance to another when live updating xenstored this document proposes an
+image format for a 'migration stream' suitable for both purposes.
 
  ## Proposal
 
-### New Save Record
+The image format consists of a _header_ followed by 1 or more _records_. Each
+record consists of a type and length field, followed by any data mandated by
+the record type. At minimum there will be a single record of type `END`
+(defined below).
 
-A new mandatory record type should be defined within the libxenlight Domain
-Image Format:
+### Header
 
-`0x00000007: DOMAIN_XENSTORE_DATA`
+The header identifies the stream as a `xenstore` stream, including the version
+of the specification that it complies with.
 
-An arbitrary number of these records may be present in the migration
-stream and may appear in any order. The format of each record should be as
-follows:
+All fields in this header must be in _big-endian_ byte order, regardless of
+the setting of the endianness bit.
 
 
  ```
      0       1       2       3       4       5       6       7    octet
  +-------+-------+-------+-------+-------+-------+-------+-------+
-| type                          | record specific data          |
-+-------------------------------+                               |
-...
-+---------------------------------------------------------------+
+| ident                                                         |
++-------------------------------+-------------------------------|
+| version                       | flags                         |
++-------------------------------+-------------------------------+
  ```
 
-where type is one of the following values
 
+| Field     | Description                                       |
+|-----------|---------------------------------------------------|
+| `ident`   | 0x78656e73746f7265 ('xenstore' in ASCII)          |
+|           |                                                   |
+| `version` | 0x00000001 (the version of the specification)     |
+|           |                                                   |
+| `flags`   | 0 (LSB): Endianness: 0 = little, 1 = big          |
+|           |                                                   |
+|           | 1-31: Reserved (must be zero)                     |
 
-| Field  | Description                                      |
-|--------|--------------------------------------------------|
-| `type` | 0x00000000: invalid                              |
-|        | 0x00000001: NODE_DATA                            |
-|        | 0x00000002: WATCH_DATA                           |
-|        | 0x00000003: TRANSACTION_DATA                     |
-|        | 0x00000004 - 0xFFFFFFFF: reserved for future use |
+### Records
 
+Records immediately follow the header and have the following format:
 
-and data is one of the record data formats described in the following
-sections.
 
+```
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+

docs/designs/xenstore-migration.md line 69

Quoted 10 lines
docs/designs/xenstore-migration.md +10 -0
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |
++-------+-------------------------------------------------------+
+```
+
+NOTE: padding octets here and in all subsequent format specifications must be
+      zero, unless stated otherwise.

What about: "... are written as zero and should be ignored on read."

Quoted 120 lines
docs/designs/xenstore-migration.md +48 -47
-NOTE: The record data does not contain an overall length because the
-libxenlight record header specifies the length.
 
+| Field  | Description                                          |
+|--------|------------------------------------------------------|
+| `type` | 0x00000000: END                                      |
+|        | 0x00000001: GLOBAL_DATA                              |
+|        | 0x00000002: CONNECTION_DATA                          |
+|        | 0x00000003: WATCH_DATA                               |
+|        | 0x00000004: TRANSACTION_DATA                         |
+|        | 0x00000005: NODE_DATA                                |
+|        | 0x00000006 - 0xFFFFFFFF: reserved for future use     |
+|        |                                                      |
+| `len`  | The length (in octets) of `body`                     |
+|        |                                                      |
+| `body` | The type-specific record data                        |
 
-**NODE_DATA**
+The various formats of the type-specific data are described in the following
+sections:
 
+\pagebreak
 
-Each NODE_DATA record specifies a single node in xenstore and is formatted
-as follows:
+### END
 
+The end record marks the end of the image, and is the final record
+in the stream.
 
  ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| NODE_DATA                     |
-+-------------------------------+
-| path length                   |
-+-------------------------------+
-| path data                     |
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
-| perm count (N)                |
-+-------------------------------+
-| perm0                         |
-+-------------------------------+
-...
-+-------------------------------+
-| permN                         |
-+-------------------------------+
-| value length                  |
-+-------------------------------+
-| value data                    |
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
  ```
 
-where perm0..N are formatted as follows:
 
+The end record contains no fields; its body length is 0.
+
+\pagebreak
+
+### GLOBAL_DATA
+
+This record is only relevant for live update. It contains details of global
+xenstored state that needs to be restored.
 
  ```
-    0       1       2       3     octet
+    0       1       2       3    octet
  +-------+-------+-------+-------+
-| perm  | pad   | domid         |
+| rw-socket-fd                  |
++-------------------------------+
+| ro-socket-fd                  |
  +-------------------------------+
  ```
 
 
-path length and value length are specified in octets (excluding the NUL
-terminator of the path). perm should be one of the ASCII values `w`, `r`,
-`b` or `n` as described in [2]. All pad values should be 0.
-All paths should be absolute (i.e. start with `/`) and as described in
-[2].
+| Field          | Description                                  |
+|----------------|----------------------------------------------|
+| `rw-socket-fd` | The file descriptor of the socket accepting  |
+|                | read-write connections                       |
+|                |                                              |
+| `ro-socket-fd` | The file descriptor of the socket accepting  |
+|                | read-only connections                        |
+
+xenstored will resume in the original process context. Hence `rw-socket-fd` and
+`ro-socket-fd` simply specify the file descriptors of the sockets.
 
 
-**WATCH_DATA**
+\pagebreak
 
+### CONNECTION_DATA
 
-Each WATCH_DATA record specifies a registered watch and is formatted as
-follows:
+For live update the image format will contain a `CONNECTION_DATA` record for
+each connection to xenstore. For migration it will only contain a record for
+the domain being migrated.
 
 
  ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| WATCH_DATA                    |
-+-------------------------------+
-| wpath length                  |
-+-------------------------------+
-| wpath data                    |

docs/designs/xenstore-migration.md line 149

Quoted 10 lines
docs/designs/xenstore-migration.md +6 -3
-...
-| pad (0 to 3 octets)           |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| conn-id                       | pad                           |
++---------------+-----------------------------------------------+
+| conn-type     | conn-spec
...
++-------------------------------+-------------------------------+

I'd rather drop the pad, and replace it by conn-type and a 2-byte flag field (for the flags INTRODUCE, RELEASE, read-only).

Quoted 46 lines

+| data-len | data

  +-------------------------------+
-| token length                  |

-+-------------------------------+
-| token data |
...
-| pad (0 to 3 octets) |
-+-------------------------------+
```

docs/designs/xenstore-migration.md +18 -11
-wpath length and token length are specified in octets (excluding the NUL
-terminator). The wpath should be as described for the `WATCH` operation in
-[2]. The token is an arbitrary string of octets not containing any NUL
-values.
 
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `conn-id`   | A non-zero number used to identify this         |
+|             | connection in subsequent connection-specific    |
+|             | records                                         |
+|             |                                                 |
+| `conn-type` | 0x0000: shared ring                             |
+|             | 0x0001: socket                                  |
+|             |                                                 |
+| `conn-spec` | See below                                       |
+|             |                                                 |
+| `data-len`  | The length (in octets) of any pending data not  |
+|             | yet written to the connection                   |
+|             |                                                 |
+| `data`      | Pending data (may be empty)                     |
 
-**TRANSACTION_DATA**
+The format of `conn-spec` is dependent upon `conn-type`.
 
+\pagebreak
 
-Each TRANSACTION_DATA record specifies an open transaction and is formatted
-as follows:
+For `shared ring` connections it is as follows:
 
 
  ```
-    0       1       2       3     octet
-+-------+-------+-------+-------+
-| TRANSACTION_DATA              |
-+-------------------------------+

docs/designs/xenstore-migration.md line 187

Quoted 10 lines
docs/designs/xenstore-migration.md +8 -2
-| tx_id                         |
-+-------------------------------+
+    0       1       2       3       4       5       6       7    octet
+                +-------+-------+-------+-------+-------+-------+
+                | domid         | tdomid        | flags         |
++---------------+---------------+---------------+---------------+
+| revtchn                       | levtchn                       |
++-------------------------------+-------------------------------+
+| mfn                                                           |
++---------------------------------------------------------------+

levtchn is not needed IMO. Event channels can be closed and reopened, so levtchn will have a new value in the common case.

With my suggestion above regarding flags we would have just 16 bytes now, which can be aligned quite nicely in a sub-structure.

Quoted 185 lines

```

docs/designs/xenstore-migration.md +114 -48
-where tx_id is the non-zero identifier values of an open transaction.
-
 
-### Protocol Extension
+| Field      | Description                                      |
+|------------|--------------------------------------------------|
+| `domid`    | The domain-id that owns the shared page          |
+|            |                                                  |
+| `tdomid`   | The domain-id that `domid` acts on behalf of if  |
+|            | it has been subject to an SET_TARGET             |
+|            | operation [2] or DOMID_INVALID otherwise         |
+|            |                                                  |
+| `flags`    | A bit-wise OR of:                                |
+|            | 0x0001: INTRODUCE has been issued                |
+|            | 0x0002: RELEASE has been issued                  |
+|            |                                                  |
+| `revtchn`  | The port number of the interdomain channel used  |
+|            | by `domid` to communicate with xenstored         |
+|            |                                                  |
+| `levtchn`  | For a live update this will be the port number   |
+|            | of the interdomain channel used by xenstored     |
+|            | itself otherwise, for migration, it will be -1   |
+|            |                                                  |
+| `mfn`      | The MFN of the shared page for a live update or  |
+|            | INVALID_MFN otherwise                            |
+
+Since the ABI guarantees that entry 1 in `domid`'s grant table will always
+contain the GFN of the shared page, so for a live update `mfn` can be used to
+give confidence that `domid` has not been re-cycled during the update.
+
+
+For `socket` connections it is as follows:
 
-Before xenstore state is migrated it is necessary to wait for any pending
-reads, writes, watch registrations etc. to complete, and also to make sure
-that xenstored does not start processing any new requests (so that new
-requests remain pending on the shared ring for subsequent processing on the
-new host). Hence the following operation is needed:
 
  ```
-QUIESCE                 <domid>|
-
-Complete processing of any request issued by the specified domain, and
-do not process any further requests from the shared ring.
+    0       1       2       3       4       5       6       7    octet
+                +-------+-------+-------+-------+-------+-------+
+                | flags         | socket-fd                     |
+                +---------------+-------------------------------+
  ```
 
-The `WATCH` operation does not allow specification of a `<domid>`; it is
-assumed that the watch pertains to the domain that owns the shared ring
-over which the operation is passed. Hence, for the tool-stack to be able
-to register a watch on behalf of a domain a new operation is needed:
 
-```
-ADD_DOMAIN_WATCHES      <domid>|<watch>|+
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `flags`     | A bit-wise OR of:                               |
+|             | 0001: read-only                                 |
+|             |                                                 |
+| `socket-fd` | The file descriptor of the connected socket     |
 
-Adds watches on behalf of the specified domain.
+This type of connection is only relevant for live update, where the xenstored
+resumes in the original process context. Hence `socket-fd` simply specify
+the file descriptor of the socket connection.
 
-<watch> is a NUL separated tuple of <path>|<token>. The semantics of this
-operation are identical to the domain issuing WATCH <path>|<token>| for
-each <watch>.
-```
+\pagebreak
+
+### WATCH_DATA
+
+The image format will contain a `WATCH_DATA` record for each watch registered
+by a connection for which there is `CONNECTION_DATA` record previously present.
 
-The watch information for a domain also needs to be extracted from the
-sending xenstored so the following operation is also needed:
 
  ```
-GET_DOMAIN_WATCHES      <domid>|<index>   <gencnt>|<watch>|*
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++---------------+---------------+
+| wpath-len     | token-len     |
++---------------+---------------+
+| wpath
+...
+| token
+...
+```
+
 
-Gets the list of watches that are currently registered for the domain.
+| Field       | Description                                     |
+|-------------|-------------------------------------------------|
+| `conn-id`   | The connection that issued the `WATCH`          |
+|             | operation [2]                                   |
+|             |                                                 |
+| `wpath-len` | The length (in octets) of `wpath` including the |
+|             | NUL terminator                                  |
+|             |                                                 |
+| `token-len` | The length (in octets) of `token` including the |
+|             | NUL terminator                                  |
+|             |                                                 |
+| `wpath`     | The watch path, as specified in the `WATCH`     |
+|             | operation                                       |
+|             |                                                 |
+| `token`     | The watch identifier token, as specified in the |
+|             | `WATCH` operation                               |
+
+\pagebreak
+
+### TRANSACTION_DATA
+
+The image format will contain a `TRANSACTION_DATA` record for each transaction
+that is pending on a connection for which there is `CONNECTION_DATA` record
+previously present.
 
-<watch> is a NUL separated tuple of <path>|<token>. The sub-list returned
-will start at <index> items into the the overall list of watches and may
-be truncated (at a <watch> boundary) such that the returned data fits
-within XENSTORE_PAYLOAD_MAX.
 
-If <index> is beyond the end of the overall list then the returned sub-
-list will be empty. If the value of <gencnt> changes then it indicates
-that the overall watch list has changed and thus it may be necessary
-to re-issue the operation for previous values of <index>.
  ```
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++-------------------------------+
+| tx-id                         |
++-------------------------------+
+```
+
+
+| Field          | Description                                  |
+|----------------|----------------------------------------------|
+| `conn-id`      | The connection that issued the               |
+|                | `TRANSACTION_START` operation [2]            |
+|                |                                              |
+| `tx-id`        | The transaction id passed back to the domain |
+|                | by the `TRANSACTION_START` operation         |
+
+\pagebreak
 
-To deal with transactions that were pending when the domain is migrated
-it is necessary to start transactions with the same tx_id on behalf of the
-domain in the receiving xenstored.
+### NODE_DATA
 
-NOTE: For safety each such transaction should result in an `EAGAIN` when
-the `TRANSACTION_END` operation is performed, as modifications made under
-the tx_id will not be part of the migration stream.
+For live update the image format will contain a `NODE_DATA` record for each
+node in xenstore. For migration it will only contain a record for the nodes
+relating to the domain being migrated. The `NODE_DATA` may be related to
+a _committed_ node (globally visible in xenstored) or a _pending_ node (created
+or modified by a transaction for which there is also a `TRANSACTION_DATA`
+record previously present).
 
-The `TRANSACTION_START` operation does not allow specification of a
-`<domid>`; it is assumed that the transaction pertains to the domain that
-owns the shared ring over which the operation is passed. Neither does it
-allow a `<transid>` to be specified; it is always chosen by xenstored.
-Hence, for the tool-stack to be able to open a transaction on behalf of a
-domain a new operation is needed:
 
  ```
-START_DOMAIN_TRANSACTION    <domid>|<transid>|
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| conn-id                       |
++-------------------------------+
+| tx-id                         |
++---------------+---------------+

docs/designs/xenstore-migration.md line 334

Quoted 10 lines
docs/designs/xenstore-migration.md +10 -0
+| access        | perm-count    |
++---------------+---------------+
+| perm1                         |
++-------------------------------+
+...
++-------------------------------+
+| permN                         |
++---------------+---------------+
+| path-len      | value-len     |
++---------------+---------------+

I'd rather move path-len and value-len above perm1 in order to have the fixed-length fields in a common structure.

Quoted 73 lines

+| path
+...
+| value
+...
+```

docs/designs/xenstore-migration.md +50 -13
+
+
+| Field        | Description                                    |
+|--------------|------------------------------------------------|
+| `conn-id`    | If this value is non-zero then this record     |
+|              | related to a pending transaction               |
+|              |                                                |
+| `tx-id`      | This value should be ignored if `conn-id` is   |
+|              | zero. Otherwise it specifies the id of the     |
+|              | pending transaction                            |
+|              |                                                |
+| `access`     | This value should be ignored if this record    |
+|              | does not relate to a pending transaction,      |
+|              | otherwise it specifies the accesses made to    |
+|              | the node and hence is a bitwise OR of:         |
+|              |                                                |
+|              | 0x0001: read                                   |
+|              | 0x0002: written                                |
+|              |                                                |
+|              | The value will be zero for a deleted node      |
+|              |                                                |
+| `perm-count` | The number (N) of node permission specifiers   |
+|              | (which will be 0 for a node deleted in a       |
+|              | pending transaction)                           |
+|              |                                                |
+| `perm1..N`   | A list of zero or more node permission         |
+|              | specifiers (see below)                         |
+|              |                                                |
+| `path-len`   | The length (in octets) of `path` including the |
+|              | NUL terminator                                 |
+|              |                                                |
+| `value-len`  | The length (in octets) of `value` (which will  |
+|              | be zero for a deleted node)                    |
+|              |                                                |
+| `path`       | The absolute path of the node                  |
+|              |                                                |
+| `value`      | The node value (which may be empty or contain  |
+|              | NUL octets)                                    |
+
+
+A node permission specifier has the following format:
 
-Starts a transaction on behalf of a domain.
 
-The semantics of this are similar to the domain issuing
-TRANSACTION_START and receiving the specified <transid> as the response.
-The main difference is that the transaction will be immediately marked as
-'conflicting' such that when the domain issues TRANSACTION_END T|, it will
-result in EAGAIN.
+```
+    0       1       2       3    octet
++-------+-------+-------+-------+
+| perm  | pad   | domid         |
++-------+-------+---------------+
  ```
 
-It may also be desirable to state in the protocol specification that
-the `INTRODUCE` operation should not clear the `<gfn>` specified such that
-a `RELEASE` operation followed by an `INTRODUCE` operation form an
-idempotent pair. The current implementation of *C xentored* does this
-(in the `domain_conn_reset()` function) but this could be dropped as this
-behaviour is not currently specified and the page will always be zeroed
-for a newly created domain.
+| Field   | Description                                         |
+|---------|-----------------------------------------------------|
+| `perm`  | One of the ASCII values `w`, `r`, `b` or `n` as     |
+|         | specified for the `SET_PERMS` operation [2]         |

docs/designs/xenstore-migration.md line 256

Quoted 10 lines
docs/designs/xenstore-migration.md +3 -1
+|         |                                                     |
+| `domid` | The domain-id to which the permission relates       |
 
 
  * * *
 
  [1] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/designs/non-cooperative-migration.md
+
  [2] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/xenstore.txt
-[3] See https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/specs/libxl-migration-stream.pandoc

Juergen

#2 lore raw

Hi,

Quoted 8 lines · Jürgen Groß
Quoted 8 lines

+```
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |

Quoted 8 lines
Quoted 6 lines

++-------+-------------------------------------------------------+
+```

(quoted diff) +2 -0
+
+NOTE: padding octets here and in all subsequent format specifications 

must be
+      zero, unless stated otherwise.

What about: "... are written as zero and should be ignored on read."

I would rather not say "ignored" because it doesn't allow us to extend the record if needed in a safe way. The read side should abort if it sees an other value than 0 in the padding.

Cheers,

Signature · 1 line
Julien Grall
#3 lore raw
Quoted 20 lines · Julien Grall

Hi,

Quoted 8 lines · Jürgen Groß
Quoted 8 lines

+```
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |

Quoted 8 lines
Quoted 6 lines

++-------+-------------------------------------------------------+
+```

(quoted diff) +2 -0
+
+NOTE: padding octets here and in all subsequent format 

specifications must be
+      zero, unless stated otherwise.

What about: "... are written as zero and should be ignored on read."

Quoted 1 line

I would rather not say "ignored" because it doesn't allow us to extend the record if needed in a safe way. The read side should abort if it sees an other value than 0 in the padding.

I'd rather ignore unknown fields. This allows to add optional data without having to special case it. Writing zeroes is the important part here, of course.

Ignoring those fields would e.g. enable a downgrade more easily, while aborting could make that impossible.

And in case a version would write non-zero bytes (e.g. due to a bug) this version could never be live-updated.

Juergen

#4 lore raw
Quoted 21 lines · Jürgen Groß
Quoted 20 lines · Julien Grall

Hi,

Quoted 16 lines · Jürgen Groß
Quoted 12 lines

+```
+    0       1       2       3       4       5       6       7    octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |
++-------+-------------------------------------------------------+
+```

(quoted diff) +2 -0
+
+NOTE: padding octets here and in all subsequent format 
Quoted 2 lines

specifications must be
+      zero, unless stated otherwise.

What about: "... are written as zero and should be ignored on read."

Quoted 4 lines
Quoted 1 line

I would rather not say "ignored" because it doesn't allow us to extend the record if needed in a safe way. The read side should abort if it sees an other value than 0 in the padding.

I'd rather ignore unknown fields. This allows to add optional data without having to special case it.

You will need a special case for 0 in any case.

Quoted 5 lines

Writing zeroes is the important part
here, of course.

Ignoring those fields would e.g. enable a downgrade more easily, while aborting could make that impossible.

You are assuming the fields may contain optional data. Now imagine, we realize in a few months we missed some important fields. How would you describe the required fields?

I can see two ways:
1) Re-using the padding fields if possible
2) Extending the record

If you re-use the padding fields, then when you downgrade you may lose information. If you extend the size of the record, then you can't downgrade.

Cheers,

Signature · 1 line
Julien Grall
#5 lore raw
Quoted 25 lines · Julien Grall
Quoted 22 lines · Jürgen Groß
Quoted 21 lines · Julien Grall

Hi,

Quoted 17 lines · Jürgen Groß
Quoted 13 lines

+```
+    0       1       2       3       4       5       6       7 octet
++-------+-------+-------+-------+-------+-------+-------+-------+
+| type                          | len                           |
++-------------------------------+-------------------------------+
+| body
+...
+|       | padding (0 to 7 octets)                               |
++-------+-------------------------------------------------------+
+```

(quoted diff) +2 -0
+
+NOTE: padding octets here and in all subsequent format 
Quoted 2 lines

specifications must be
+      zero, unless stated otherwise.

What about: "... are written as zero and should be ignored on read."

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

I would rather not say "ignored" because it doesn't allow us to extend the record if needed in a safe way. The read side should abort if it sees an other value than 0 in the padding.

I'd rather ignore unknown fields. This allows to add optional data without having to special case it.

You will need a special case for 0 in any case.

0 will need to have the "no optional data" semantics.

Quoted 7 lines
Quoted 6 lines

Writing zeroes is the important part
here, of course.

Ignoring those fields would e.g. enable a downgrade more easily, while aborting could make that impossible.

Quoted 7 lines

You are assuming the fields may contain optional data. Now imagine, we realize in a few months we missed some important fields. How would you describe the required fields?

I can see two ways:
    1) Re-using the padding fields if possible
    2) Extending the record

If you re-use the padding fields, then when you downgrade you may lose information. If you extend the size of the record, then you can't downgrade.

If I extend the record and do a downgrade I'm losing the information, too, as the old version won't read it in any case. BTW, extending the record is no problem, as the length is stored in the header. Unknown records (and extensions) will be just ignored when reading.

In your case when reusing the paddings and doing a downgrade you would crash, as the paddings are no longer zero.

In case a downgrade should not be done due to vital information loss then you should just not do it.

Juergen

#6 lore raw

Hi,

Quoted 5 lines · Jürgen Groß

On 24.04.20 17:44, Julien Grall wrote:
If I extend the record and do a downgrade I'm losing the information, too, as the old version won't read it in any case. BTW, extending the record is no problem, as the length is stored in the header. Unknown records (and extensions) will be just ignored when reading.

That's very much up to the implementation. An implementation may decide to bail out if the record is not an exact size.

Quoted 6 lines

In your case when reusing the paddings and doing a downgrade you would crash, as the paddings are no longer zero.

In case a downgrade should not be done due to vital information loss then you should just not do it.

Of course, however I don't think a user will necessarily know it should not do it. So how do you protect against misuse?

Cheers,

Signature · 1 line
Julien Grall
#7 lore raw
Quoted 10 lines

-----Original Message-----
From: Julien Grall <[email protected]>
Sent: 24 April 2020 17:04
To: Jürgen Groß <[email protected]>; Paul Durrant <[email protected]>; [email protected]
Cc: Paul Durrant <[email protected]>
Subject: Re: [PATCH] docs/designs: re-work the xenstore migration document...

Hi,

On 24/04/2020 16:59, Jürgen Groß wrote:

Quoted 9 lines
Quoted 5 lines · Julien Grall

If I extend the record and do a downgrade I'm losing the information, too, as the old version won't read it in any case. BTW, extending the record is no problem, as the length is stored in the header. Unknown records (and extensions) will be just ignored when reading.

That's very much up to the implementation. An implementation may decide to bail out if the record is not an exact size.

It won't know. The record will be whatever size it says it is, and if the format doesn't match what the implementation was expecting then it'll probably crash.

Quoted 10 lines
Quoted 6 lines

In your case when reusing the paddings and doing a downgrade you would crash, as the paddings are no longer zero.

In case a downgrade should not be done due to vital information loss then you should just not do it.

Of course, however I don't think a user will necessarily know it should not do it. So how do you protect against misuse?

The stream is versioned. If information is vital then I'd expect the version to be bumped, which should prevent a downgrade.

Paul

#8 lore raw
Quoted 26 lines · Paul Durrant
Quoted 10 lines

-----Original Message-----
From: Julien Grall <[email protected]>
Sent: 24 April 2020 17:04
To: Jürgen Groß <[email protected]>; Paul Durrant <[email protected]>; [email protected]
Cc: Paul Durrant <[email protected]>
Subject: Re: [PATCH] docs/designs: re-work the xenstore migration document...

Hi,

On 24/04/2020 16:59, Jürgen Groß wrote:

Quoted 9 lines
Quoted 5 lines · Julien Grall

If I extend the record and do a downgrade I'm losing the information, too, as the old version won't read it in any case. BTW, extending the record is no problem, as the length is stored in the header. Unknown records (and extensions) will be just ignored when reading.

That's very much up to the implementation. An implementation may decide to bail out if the record is not an exact size.

It won't know. The record will be whatever size it says it is, and if the format doesn't match what the implementation was expecting then it'll probably crash.

Quoted 4 lines
Quoted 4 lines

In your case when reusing the paddings and doing a downgrade you would crash, as the paddings are no longer zero.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

In case a downgrade should not be done due to vital information loss then you should just not do it.

Of course, however I don't think a user will necessarily know it should not do it. So how do you protect against misuse?

The stream is versioned. If information is vital then I'd expect the version to be bumped, which should prevent a downgrade.

Uh, this is problematic. I agree that a downgrade will be prevented, but merely via a crash. We won't have both versions active in parallel, but the version we are updating to will make it or not. There is no way back.

The general rule should be to be as forgiving to errors in the stream as possible in order _not_ to have a crashing xenstored due to strict parameter testing.

And in case there is a potential of problems it needs to be documented and then its up to the user to follow the documentation.

Juergen

#9 lore raw
In reply to Paul Durrant
Quoted 10 lines · Paul Durrant

From: Paul Durrant <[email protected]>

... to specify a separate migration stream that will also be suitable for live update.

The original scope of the document was to support non-cooperative migration of guests [1] but, since then, live update of xenstored has been brought into scope. Thus it makes more sense to define a separate image format for serializing xenstore state that is suitable for both purposes.

Quoted 6 lines

The document has been limited to specifying a new image format. The mechanism for acquiring the image for live update or migration is not covered as that is more appropriately dealt with by a patch to docs/misc/xenstore.txt. It is also expected that, when the first implementation of live update or migration making use of this specification is committed, that the document is moved from docs/designs into docs/specs.

Can we please add a general remark:

Records depending other records (e.g. watch records referencing a connection record via a connection-id, or node records for a node being a child of another node in the stream) must always be located after the record they depend on.

Juergen

#10 lore raw
Quoted 25 lines

-----Original Message-----
From: Jürgen Groß <[email protected]>
Sent: 27 April 2020 08:42
To: Paul Durrant <[email protected]>; [email protected]
Cc: Paul Durrant <[email protected]>
Subject: Re: [PATCH] docs/designs: re-work the xenstore migration document...

Quoted 10 lines · Paul Durrant

From: Paul Durrant <[email protected]>

... to specify a separate migration stream that will also be suitable for live update.

The original scope of the document was to support non-cooperative migration of guests [1] but, since then, live update of xenstored has been brought into scope. Thus it makes more sense to define a separate image format for serializing xenstore state that is suitable for both purposes.

Quoted 6 lines

The document has been limited to specifying a new image format. The mechanism for acquiring the image for live update or migration is not covered as that is more appropriately dealt with by a patch to docs/misc/xenstore.txt. It is also expected that, when the first implementation of live update or migration making use of this specification is committed, that the document is moved from docs/designs into docs/specs.

Quoted 7 lines

Can we please add a general remark:

Records depending other records (e.g. watch records referencing a connection record via a connection-id, or node records for a node being a child of another node in the stream) must always be located after the record they depend on.

Sure. I'll call that out at the beginning of the records section.

Paul

Quoted 2 lines

Juergen