Build Error
I am new developer to Yocto and embedded Linux in general
Host machine: i3 with 4GB RAM
OS: Ubuntu 11.10 64-bit
I am following the online quick start guide, and looks like the end of bitbake runs into several errors:
ERROR: Task 1136 (/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb, do_configure) failed with exit code '1'
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-nam ing-utils-native_0.8.7.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_ 2.1.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb' failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_ 0.5.bb' failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb' failed
ERROR: '/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb' failed
ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb' failed
Looking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz
I have attached errors some of the log files. The common error appears to be oe_runconf failed.
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in the message popup says what is the shell.
Thanks for any help.
Regards,
Sean
It seems like
wget http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz
return a 500 - Internal server error.
Does not look like you did anything wrong.
However, I do not know a workaround.
I have attached these files from my downloads directory.
You can copy these files in yours and it should get you by for now.
Quoted 99 lines · Sean Liming
I am new developer to Yocto and embedded Linux in general
Host machine: i3 with 4GB RAM
OS: Ubuntu 11.10 64-bit
I am following the online quick start guide, and looks like the end of bitbake runs into several errors:
ERROR: Task 1136 (
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb,do_configure) failed with exit code '1'ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-naming-utils-native_0.8.7.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_2.1.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_0.5.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb' failedLooking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gzI have attached errors some of the log files. The common error appears to be
oe_runconffailed.Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in the message popup says what is the shell.
Thanks for any help.
Regards,
Sean
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
I also attached the corresponding .done file however, since its size was 0, it was not attached - dont forget to add a .done file too.
Quoted 114 lines · autif khan
It seems like
wget http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz
return a 500 - Internal server error.
Does not look like you did anything wrong.
However, I do not know a workaround.
I have attached these files from my downloads directory.
You can copy these files in yours and it should get you by for now.
Quoted 99 lines · Sean Liming
I am new developer to Yocto and embedded Linux in general
Host machine: i3 with 4GB RAM
OS: Ubuntu 11.10 64-bit
I am following the online quick start guide, and looks like the end of bitbake runs into several errors:
ERROR: Task 1136 (
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb,do_configure) failed with exit code '1'ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-naming-utils-native_0.8.7.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_2.1.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_0.5.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb' failedLooking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gzI have attached errors some of the log files. The common error appears to be
oe_runconffailed.Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in the message popup says what is the shell.
Thanks for any help.
Regards,
Sean
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 3 lines · Sean Liming
Looking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz
it should have had yocto source mirrors in your setup
Hi Sean,
icon-naming-utils fails because the download site does not have the source
archive available. You can download it from h ttp://downloads.yoctoproject.org/mirror/sources/icon-naming-utils-0.8.7.tar.gz<http://downloads.yoctoproject.org/mirror/sources/icon-naming-utils-0.8.7.tar.gz>
For the other two you are lacking lib-xml-parser for intltool. This was a bug a while ago because of a missing dependency. But has been resolved:
http://comments.gmane.org/gmane.comp.handhelds.openembedded.core/7989.
You are supposed to be using bash. Ubuntu uses dash by default but if you were then the sanity checker would flag it the moment you run Bitbake from you build environment. Just in case: sudo dpkg-reconfigure bash
Rudi
Quoted 91 lines · Sean Liming
I am new developer to Yocto and embedded Linux in general****
** **
Host machine: i3 with 4GB RAM****
OS: Ubuntu 11.10 64-bit****
** **
I am following the online quick start guide, and looks like the end of bitbake runs into several errors:****
** **
ERROR: Task 1136 (
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb,do_configure) failed with exit code '1'****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-naming-utils-native_0.8.7.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_2.1.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_0.5.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb' failed****ERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb' failed****** **
Looking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gz****** **
I have attached errors some of the log files. The common error appears to be
oe_runconffailed.****** **
Did I miss configure something? Wrong python version?****
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:****
** **
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in the message popup says what is the shell.****
** **
Thanks for any help.****
** **
Regards,****
** **
Sean****
** **
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 1 line
*Rudolf J. Streif*
Quoted 4 lines · Rudolf Streif
You are supposed to be using bash. Ubuntu uses dash by default but if you were then the sanity checker would flag it the moment you run Bitbake from you build environment. Just in case: sudo dpkg-reconfigure bash
Not really. We strive hard to stay off bashism. I use dash all the time
Quoted 4 lines · Sean Liming
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"SOURCE_MIRROR_URL = "http://autobuilder.yoctoproject.org/pub/sources/"
that should help a bit
@ autif- thank you for the tar file. Placed it in the downloads folder and the error doesn't appear.
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"SOURCE_MIRROR_URL = "http://autobuilder.yoctoproject.org/pub/sources/"
I am not sure how to resolve the lib-xml-parser for intltool issue based on the post.
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build Error
Quoted 4 lines · Sean Liming
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"SOURCE_MIRROR_URL = "http://autobuilder.yoctoproject.org/pub/sources/"
that should help a bit
Quoted 10 lines · Sean Liming
@ autif- thank you for the tar file. Placed it in the downloads folder and the error doesn't appear.
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"I am not sure how to resolve the lib-xml-parser for intltool issue based on the post.
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
it should not be getting perl from your build but from the native sysroot. is perl-native staged ?
Quoted 33 lines
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorQuoted 4 lines · Sean Liming
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"that should help a bit
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
How would I check if perl-native is staged? The intltool.inc has the updated Rudolf.
Regards,
Sean
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 10:30 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build Error
Quoted 10 lines · Sean Liming
@ autif- thank you for the tar file. Placed it in the downloads folder and the error doesn't appear.
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"I am not sure how to resolve the lib-xml-parser for intltool issue based on the post.
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
it should not be getting perl from your build but from the native sysroot. is perl-native staged ?
Quoted 33 lines
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorQuoted 4 lines · Sean Liming
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"that should help a bit
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Searching further there seems to be different patches for perl-native for Ubuntu 10.04. Not sure what needs to be applied here.
Regards,
Sean
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Sunday, February 05, 2012 11:05 PM
To: 'Khem Raj'
Cc: [email protected]
Subject: Re: [yocto] Build Error
How would I check if perl-native is staged? The intltool.inc has the updated Rudolf.
Regards,
Sean
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 10:30 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build Error
Quoted 1 line · Sean Liming
@ autif- thank you for the tar file. Placed it in the downloads folder and
the error doesn't appear.
Quoted 8 lines
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"I am not sure how to resolve the lib-xml-parser for intltool issue based
on the post.
Quoted 1 line
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
it should not be getting perl from your build but from the native sysroot. is perl-native staged ?
Quoted 17 lines
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorOn Sun, Feb 5, 2012 at 2:27 PM, Sean Liming <[email protected]>
Quoted 10 lines · wrote:
Quoted 4 lines
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"
Quoted 6 lines
that should help a bit
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Found the problem - missing package - libxml-parser-perl. It is not part of the setup. For any future reference, here is the fix:
$sudo apt-get install libxml-parser-perl
Ubuntu was a fresh install. I should have checked the docs in progress, which calls it out at the end.
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Sunday, February 05, 2012 11:21 PM
To: 'Khem Raj'
Cc: [email protected]
Subject: Re: [yocto] Build Error
Searching further there seems to be different patches for perl-native for Ubuntu 10.04. Not sure what needs to be applied here.
Regards,
Sean
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Sunday, February 05, 2012 11:05 PM
To: 'Khem Raj'
Cc: [email protected]
Subject: Re: [yocto] Build Error
How would I check if perl-native is staged? The intltool.inc has the updated Rudolf.
Regards,
Sean
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 10:30 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build Error
Quoted 2 lines · Sean Liming
@ autif- thank you for the tar file. Placed it in the downloads folder and
the error doesn't appear.
Quoted 9 lines
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"I am not sure how to resolve the lib-xml-parser for intltool issue based
on the post.
Quoted 1 line
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
ERROR: oe_runconf failed
it should not be getting perl from your build but from the native sysroot. is perl-native staged ?
Quoted 17 lines
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorOn Sun, Feb 5, 2012 at 2:27 PM, Sean Liming <[email protected]>
Quoted 10 lines · wrote:
Quoted 4 lines
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"
Quoted 6 lines
that should help a bit
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Here is what I have - I started with a minimal ubuntu server and the following command seens to get all the dependencies - the last few (bison, flex and unzip) are not required - but are required for other stuff I am working on.
I hope this helps with the documentation.
sudo apt-get install -y gcc g++ patch diffstat texi2html texinfo cvs subversion gawk chrpath make libgl1-mesa-dev libglu1-mesa-dev libsdl1.2-dev git libxml-parser-perl bison gettext flex unzip
Quoted 131 lines · Sean Liming
Found the problem - missing package - libxml-parser-perl. It is not part of the setup. For any future reference, here is the fix:
$sudo apt-get install libxml-parser-perl
Ubuntu was a fresh install. I should have checked the docs in progress, which calls it out at the end.
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Sunday, February 05, 2012 11:21 PM
To: 'Khem Raj'
Cc: [email protected]
Subject: Re: [yocto] Build ErrorSearching further there seems to be different patches for perl-native for Ubuntu 10.04. Not sure what needs to be applied here.
Regards,
Sean
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sean Liming
Sent: Sunday, February 05, 2012 11:05 PM
To: 'Khem Raj'
Cc: [email protected]
Subject: Re: [yocto] Build ErrorHow would I check if perl-native is staged? The intltool.inc has the updated Rudolf.
Regards,
Sean
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 10:30 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorQuoted 2 lines · Sean Liming
@ autif- thank you for the tar file. Placed it in the downloads folder and
the error doesn't appear.
Quoted 9 lines
I added the two lines to the local.conf folder
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"I am not sure how to resolve the lib-xml-parser for intltool issue based
on the post.
Quoted 1 line
checking for perl...
/usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking forXML::Parser... configure: error:XML::Parserperl module is required for intltool
ERROR:oe_runconffailedit should not be getting perl from your build but from the native sysroot. is perl-native staged ?
Quoted 17 lines
Regards,
Sean Liming
Owner
SJJ Embedded Micro Solutions, LLC.
Tel: 714-970-7523 / Cell: 858-774-3176-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Sunday, February 05, 2012 4:00 PM
To: Sean Liming
Cc: [email protected]
Subject: Re: [yocto] Build ErrorOn Sun, Feb 5, 2012 at 2:27 PM, Sean Liming <[email protected]>
Quoted 10 lines · wrote:
Quoted 4 lines
Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
you could add something like below to your local.conf
INHERIT += "own-mirrors"
SOURCE_MIRROR_URL= "http://autobuilder.yoctoproject.org/pub/sources/"Quoted 6 lines
that should help a bit
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
i suppose try again ,again, and again.
Quoted 99 lines · Sean Liming
I am new developer to Yocto and embedded Linux in general
Host machine: i3 with 4GB RAM
OS: Ubuntu 11.10 64-bit
I am following the online quick start guide, and looks like the end of bitbake runs into several errors:
ERROR: Task 1136 (
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb,do_configure) failed with exit code '1'ERROR:
'/home/sean/poky-edison-6.0/meta/recipes-devtools/icon-naming-utils/icon-naming-utils-native_0.8.7.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-graphics/xorg-lib/xkeyboard-config_2.1.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-support/libfm/libfm_0.1.14.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-gnome/gnome/gnome-vfs_2.24.4.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-support/vte/vte_0.24.3.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/puzzles/oh-puzzles_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-connectivity/connman/connman-gnome_0.5.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/tasks_0.19.bb' failedERROR: '
/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/dates_git.bb' failedERROR:
'/home/sean/poky-edison-6.0/meta/recipes-sato/pimlico/contacts_git.bb' failedLooking back at the build process, one error calls out a package that cannot be downloaded:
http://tango.freedesktop.org/releases/icon-naming-utils-0.8.7.tar.gzI have attached errors some of the log files. The common error appears to be
oe_runconffailed.Did I miss configure something? Wrong python version?
There was a post about the dash vs. bash shell. I am not sure what shell is supposed to be using:
The instructions say run sudo dpkg-reconfigure dash and say no. Nothing in the message popup says what is the shell.
Thanks for any help.
Regards,
Sean
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto