Skip to contentSkip to conversation

kernel 2.4.25 and SIS900 ethernet card ... ((( update )))

DISCUSSION psycosonic 2 participants 2 messages Mar 8, 2004

lore
Share & tools
lore

psycosonic

author
#0 lore raw

Well .. i've tried now with a realtek.. the problem persists.
What should i do? i've already recompiled the kernel too many times... same options that 2.4.24... 2.4.24 works fine with network.. but 2.4.25 don't :(
Help me please.

Thanks
.

----- Original Message ----- From: "psycosonic" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 28, 2004 3:11 AM
Subject: Fw: kernel 2.4.25 and SIS900 ethernet card

Quoted 29 lines

Hey.

I'm having some problems since i updated from kernel 2.4.24 to 2.4.25 .. it seems that 2.4.25 has some incompatibility with SIS900 ethernet card. Well it should work @ 100Mbit .. and it only works @ 10Mbit... i've used mii-tool to diagnose the problem.. what i got was this:

root@XXX:~# mii-tool
eth0: negotiated 100baseTx-FD, link ok
eth1: negotiated 100baseTx-FD, link ok <--- this is the one i'm talkin' about ( SIS900 )

...
00:0e.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 02)
...

--------

Well.. with kernel 2.4.24 i usually had a max speed of 12Mb/s .. now , with 2.4.25 it only goes to 2,2Mb/s :(

What should i do ? i've already tried to compile the driver from SIS but it's the same.

I'll be waiting for an answer.
Thanks.

Hope this is useful :)

Cya m8's * *

#1 lore raw

Hi,

I am suprized, I have both of these chips here, and they both work perfectly with any kernel version, including 2.4.25. Are you sure you didn't change anything else ? what is at the other end of the wire ? a switch ? a linux box ? if so, was it upgraded too ? Can you check that this equipment has been configured in 100-FD ? what does netstat -i report ? did you try to change the cable ?

Willy

Quoted 60 lines · psycosonic

Well .. i've tried now with a realtek.. the problem persists. What should i do? i've already recompiled the kernel too many times... same options that 2.4.24...
2.4.24 works fine with network.. but 2.4.25 don't :(
Help me please.

Thanks
.

----- Original Message -----
From: "psycosonic" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 28, 2004 3:11 AM
Subject: Fw: kernel 2.4.25 and SIS900 ethernet card

Quoted 29 lines

Hey.

I'm having some problems since i updated from kernel 2.4.24 to 2.4.25 .. it seems that 2.4.25 has some incompatibility with SIS900 ethernet card. Well it should work @ 100Mbit .. and it only works @ 10Mbit... i've used mii-tool to diagnose the problem.. what i got was this:

root@XXX:~# mii-tool
eth0: negotiated 100baseTx-FD, link ok
eth1: negotiated 100baseTx-FD, link ok <--- this is the one i'm talkin' 
about ( SIS900 )

...
00:0e.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 02)
...

--------

Well.. with kernel 2.4.24 i usually had a max speed of 12Mb/s .. now , with 2.4.25 it only goes to 2,2Mb/s :(

What should i do ? i've already tried to compile the driver from SIS but it's the same.

Quoted 7 lines

I'll be waiting for an answer.
Thanks.

Hope this is useful :)

Cya m8's * *

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/