BUG ? and questions
Hello
My name is Calin
I have a Cx 486/66 with 12 Megs of ram AST computer gcc 2.95.3, glibc 2.1.3, make 3.79.1 binutils 2.11 ?? Problems:
1. When I try to run multiple (2) compilations on a 2.4.4 kernel usually one
of them dies -- if it's gcc - signal 11 , if it's sh or rarely make -
segmentation fault.
It is not a hardware problem (with kernel 2.2.x it does not do this
and I have a cooler on my cpu)
2. I compiled a kernel 2.4.3 with XFS and sound as a module (I use alsa
sound driver), and when I try to insmod soundcore.o it says about some
unresolved symbols (one of them is printk )
I don't have this problem with any of the originals 2.4.x kernels
(downloaded from kernel.org)
Questions:
1. I have a vlb system and the kernel does not report an IDE controler
I presume there is one. Is there a way to find out what type it is
because a read about buggy 486 motherboards and I want to be sure
that mine is not (It does not seems to be -- I have my system
from about a year and a half and I have no problems )
2. I saw in .config in the root of kernel tree "#CONFIG_BLK_DEV_IDEDISK_SEAGATE
is not set ";
the same for IBM, Maxtor etc. If I set this will be any performance inprovements ?
3. I noticed that if I compile RTC in the kernel my system runs smootly ?
Is this just an illusion ?
Sorry for bothering you
Sorry if the questions are silly
Bye
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Quoted 6 lines
I have a Cx 486/66 with 12 Megs of ram AST computer gcc 2.95.3, glibc 2.1.3, make 3.79.1 binutils 2.11 ?? Problems:
1. When I try to run multiple (2) compilations on a 2.4.4 kernel usually one
of them dies -- if it's gcc - signal 11 , if it's sh
looks like an out-of-memory (OOM) kill. Check your log files. (var/log/messages but can vary on some distributions)
12 MB of RAM is not enough for Kernel 2.4.4 and several gcc runs, as some gcc optimizations have complexity of O(n^2) or higher.
greetings
Christian Bornträger
Quoted 9 lines · szonyi calin
I have a Cx 486/66 with 12 Megs of ram AST computer gcc 2.95.3, glibc 2.1.3, make 3.79.1 binutils 2.11 ?? Problems:
1. When I try to run multiple (2) compilations on a 2.4.4 kernel usually one
of them dies -- if it's gcc - signal 11 , if it's sh or rarely make -
segmentation fault.
Quoted 3 lines
It is not a hardware problem (with kernel 2.2.x it does not do this
and I have a cooler on my cpu)
Are your sure? Check out the SIG11 FAQ at
http://www.bitwizard.nl/sig11/ .
Erik
Signature · 5 lines
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [email protected] WWW: http://www-ict.its.tudelft.nl/~erik/