LCD Initialisation for PXA255 Custom board
Hello,
We have a custom board on PXA 255 .But for LCD ,the on chip LCd controller is not being used.
The LCD is being controlled by SMASUNG LCD Controller S6B33B0A. It is connected on Datalines D0 to D15.It is not using standarad LCD GPIO pins of PXA255
How can this type of setup be initialised n the U-Boot Any reference is available for initialisting this type of setup ?
Regards
Praveen
Quoted 2 lines · In message <000901c4ff04$af39a840$0400a8c0@praveenvs> you wrote:
The LCD is being controlled by SMASUNG LCD Controller S6B33B0A.
...
Quoted 1 line
How can this type of setup be initialised n the U-Boot
Implement a driver for the S6B33B0A LCD controller.
Quoted 1 line
Any reference is available for initialisting this type of setup ?
See the other existing LCD drivers.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "A child is a person who can't understand why someone would give away a perfectly good kitten." - Doug Larson